From the Sector

• Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

Amongst them are TMAS members of the ACG Group, who quickly established a dedicated new nonwovens fabric converting and single-use garment making-up plant to supply to the Swedish health authorities. From a standing start in March, this is now producing 1.8 million square metres of converted fabric and turning it into 692,000 finished medical garments each month.

“In 2020 so far, we have seen new value chains being created and a certain amount of permanent reshoring is now inevitable,” says Premler-Andersson. “This is being backed by the new funding announced in the European Union’s Next Generation EU plan, with €750 billion marked for helping industry recover. As the European Commission President Ursula von der Leyen has stressed, “green and digital” transitions hold the key to Europe’s future prosperity and resilience, and TMAS members have new solutions to assist in both areas.”

Remote working

Automated solutions have opened up many possibilities for remote working during the pandemic. Texo AB, for example, the specialist in wide-width weaving looms for the paper industry, was able to successfully complete the build and delivery of a major multi-container order between April and May.

“Our new Remote Guidance software now makes it possible for us to carry out some of the commissioning and troubleshooting of such new lines remotely, which has been helpful” says Texo AB President Anders Svensson.

Svegea of Sweden, which has spent the past few months developing its new CR-210 fabric relaxation machine for knitted fabrics, has also successfully set up and installed a number of machines remotely, which the company has never attempted before.

“The pandemic has definitely led to some inventive solutions for us and with international travel currently not possible, we are finding better methods of digital communication and collaboration all the time,” says Svegea managing director Hakan Steene.

Eric Norling, Vice President of the Precision Application business of Baldwin Technology, believes the pandemic may have a more permanent impact on global travel.

“We have now proven that e-meetings and virtual collaboration tools are effective,” he says. “Baldwin implemented a home office work regime from April with only production personnel and R&D researchers at the workplace. These past few months have shown that we can be just as effective and do not need to travel for physical meetings to the same extent that was previously thought to be necessary.”

Pär Hedman, Sales and Marketing Manager for IRO AB, however, believes such advances can only go so far at the moment.

“Video conferences have taken a big leap forward, especially in development projects, and this method of communication is here to stay, but it will never completely replace personal meetings,” he says. “And textile fabrics need to be touched, examined and accepted by the senses, which is impossible to do via digital media today. The coming haptic internet, however, may well even change that too.”

Social distancing

The many garment factories now equipped with Eton Systems UPS work stations – designed to save considerable costs through automation – have meanwhile benefited from the unintentional social distancing they automatically provide compared to factories with conventional banks of sewing machines.

“These companies have been able to continue operating throughout the pandemic due to the spaced nature of our automated plant configurations,” says Eton Systems Business Development Manager Roger Ryrlén. “The UPS system has been established for some time, but planned spacing has proved an accidental plus for our customers – with improved productivity.”

“Innovations from TMAS member companies have been coming thick and fast recently due to their advanced know-how in automation concepts,” Premler-Andersson concludes.  “If anything, the restrictions imposed by the Covid-19 pandemic have only accelerated these initiatives by obliging our members to take new approaches.”

Shanghai – Sateri has unveiled FinexTM as its new product brand for recycled fibre. FinexTM, short for ‘Fibre Next’, is an innovative next-generation cellulosic fibre containing recycled content. Internationally known outdoor brand Lafuma has produced FinexTM apparel ahead of 618, China’s major mid-year online shopping festival, while independent China designer Rico Lee will launch his FinexTM apparel next month.

Since its announcement in March this year of a breakthrough in commercial production of viscose using recycled textile waste, Sateri has worked closely with its downstream yarn and garment manufacturing partners to bring the recycled fibre product to the consumer market.

“We’re pleased to collaborate with Sateri as one of their first brand partners for FinexTM. Sateri’s dedication to this partnership made it possible for Lafuma to produce T-shirts with this fine quality fibre in a short time. T-shirts made with FinexTM will be among the offerings Lafuma has in store for the 618 festival as we look to support environmentally-friendly and excellent performance solutions to strengthen our position as a leading outdoor apparel brand,” said Wu Qian, General Manager of Lafuma China.

Echoing similar sentiments is Rico Lee who established his own independent label in 2014, “I jumped at the opportunity to collaborate with Sateri when they approached me because FinexTM encapsulates what my brand stands for – Beautiful Technology that combines function and fashion.”

Tom Liu, Sateri’s Commercial Vice President said, “Like our flagship brand EcoCosy®, FinexTM is made from bio-based natural fibres. Innovation and technology has made cellulosic textile fibre recycling possible and FinexTM represents how nature not only renews itself but that products made from nature can also be regenerated. This, at its heart, is what circular fashion looks like. Our brand promise to customers remains constant– Sateri’s products are sustainable, high quality, efficient, and cost-effective. The FinexTM tagline ‘Together For A Better Next’ expresses our aspiration to be the partner of choice for next-generation fibre - we thank Lafuma and Rico Lee for pioneering with us on this quest.”

Last month, Sateri announced its entry into China’s Lyocell fibre market. The recent string of product portfolio expansion announcements is underpinned by Sateri’s business strategy to capture value. Allen Zhang, President of Sateri said, “Being the world’s largest viscose producer gives us the advantages that come with volume, but value is what we hope differentiates us. By this, we don’t only mean higher value products like Lyocell or FinexTM but also the value we bring to communities, country, climate and customers.”

Globally, less than 1% of material used to produce clothing is recycled into new clothing. This presents a big opportunity for textile fibre recycling, particularly in China which is the largest textile producing country in the world. Last month, Sateri became a council member of the China Association of Circular Economy (CACE). The company will work closely with CACE’s Textile Waste Comprehensive Utilisation Committee to establish standards and promote industrial-scale textile waste recycling. Sateri is part of the Singapore-based RGE group of companies which has committed USD200 million into next-generation textile fibre innovation and technology.

• Bemberg™ presents a great deal of novelties with a true key-statement for sustainability: Let’s Make it Circular!
• The lifespan of Bemberg™’s regenerated cellulose fiber Cupro derived from cotton is fully circular: from the source to manufacturing.

“Sustainability is the founding pillar of our company,” says SHUNSUKE SATO, sales manager of Bemberg™ by Asahi Kasei. “Indeed, the smart fiber is made from a cotton linter which is pre-consumer material, a natural derived source, that doesn’t deplete forestry resources”.

In Bemberg™’s production the whole sustainable closed-loop process is supported by the LCA study, signed by ICEA (Istituto per la Certificazione Etica e Ambientale) and validated by President of Ecoinnovazione Paolo Masoni ex Research Director of ENEA (Ente per le Nuove tecnologie, l’Energia e l’Ambiente).

While recyclability is granted by the Global Recycle Standard - GRS certification by the renown Textile Exchange (an influential guarantee that involves the whole production process and supply chain behind the company’s smart yarns), Bemberg™ yarns are also entirely biodegradable and ecotoxicity-free - meaning that at the end of their life circle they break down into the environment leaving no trace in terms of toxic substances as attested by the Innovhub-SSI report.

A special focus deserves Velutine™ Evo, the new fibrillation finishing technology for Bemberg™ fabrics only that guarantees another level of sustainable benefits without sacrificing the Bemberg™ amazing and unique touch. As part of the company’s continuous innovation, Velutine™ Evo brings better environmental, energy and water profiles for the benefit of Bemberg™ partners in the manufacture of their ranges.
The sustainable achievements of the new finishing technology have been measured by LCA - Life Cycle Assessment study by ICEA and proved to guarantee environmental benefits such as -16.5% of greenhouses gas emissions and -21% of overall consumption of energy resources. On top of that Velutine™ Evo means also -20.5% of electricity savings, -15.9% of steam production and -19.5% of water consumption.

The first Bemberg™ partner to present a commercial collection enriched by Velutine™ Evo is the Portuguese Matias & Araújo. With an innovative spirit, dynamism and a determined entrepreneurial spirit, the company is a leading knitwear producer for the textile industry.

Bemberg™ collaborated also with the premium brand CAALO that is making its mark in the outerwear market with its Sustainably produced Functional-Luxury proposal. For SS20, CAALO uses Bemberg™ lining because of the sustainability properties and it’s unique colour.

CAALO uses as much eco-friendly and sustainable materials as possible without compromising on design or quality. This Bemberg™ lining was a perfect fit. This versatile blazer features a removable hood, hidden welt pockets, button closure, and removable cargo pockets.

Anglo Recycling Technology is on course to deliver no less than a million of its special nonwoven mats for hydroponically growing herbs to a major customer in the Middle East this year. The Growfelt-branded products arose from the discovery back in the late 1990s by Anglo Recycling’s owner Simon Macaulay, that the Sussex-based retail supplier of salads, Van Heineken Brothers (now Vitacress), used nonwoven felts on which to grow its cress.

“I drove down to see the company’s production manager, Chris Moncrieff and discovered they were indeed growing cress on felts, but they were made from virgin materials and he liked the idea of maybe using a blend of virgin fiber offcuts of cotton, wool, and polypropylene,” he explains. “That’s how Growfelt was born. For the first six years, we supplied exclusively to Vitacress and in return, they helped us to bring our factory up to food-grade standard and to set in place a testing regime for Salmonella E-Coli coliforms and listeria.”

In recent years, however, Anglo Recycling, which is based in Whitworth, near Rochdale in the UK, has significantly broadened its customer base. It now offers a core of three growing media products to meet the differing needs of customers across Europe, the Middle East, and the Far East, whether for retail presentation and appearance or for water holding.

Technology transfer that is creating waves

For more than a decade now, the Manmade Fibers segment of the Swiss Oerlikon Group has been hosting a comprehensive technology symposium at the beginning of each year in the Indian region around Silvassa/Daman. Numerous Indian manmade fiber producers have settled in this area, around a four-hour drive north of Mumbai. Fed from Oerlikon polycondensation and extrusion systems, these companies manufacture polyester, nylon and polypropylene on large-scale installations with Oerlikon Barmag WINGS POY, WINGS FDY, IDY and DTY product lines and using Oerlikon Neumag’s staple fiber and BCF technologies. Reason enough for the Manmade Fibers segment’s experts to regularly provide their clientèle with detailed specialist presentations in India on the latest developments of the product and service portfolio.

And this was once again the case at the event held at the beginning of 2020, where around 450 managers and employees from local businesses took the opportunity to exchange ideas and information. For the third time in succession, Oerlikon also entered into dialog with the next generation of managers at major Indian polyester and nylon manufacturers in a separate event hosted in Mumbai beforehand. The technology symposium was again held – for the very first time – just a few days later and in a slightly modified form at a second venue: in Kolkata in West Bengal, a potential second future key location for manufacturing manmade fibers in India according to plans revealed by the Indian government. Here, the discussions held by the Oerlikon experts focused above all on the transfer of technologies for manufacturing polyester, nylon and polypropylene. Oerlikon is able to offer the entire process chain – from the melt to the textured yarn or the fibers and including the necessary semi- and fullyautomated logistics process – from a single source. This is of interest above all for potential new customers and investors in West Bengal and neighboring Bangladesh, as some do not have decades of expertise in manufacturing manmade fibers, as is the case for most companies in the region around Silvassa/Daman.

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

With his lecture “The HUGO BOSS sustainability programme ... and what our customer has to do with it” Andreas Streubig, Director of Global Sustainability at Hugo Boss AG, Metzingen, Germany, rolls up the textile value chain from a different angle, starting at the consumer level. As a representative of a premium brand for women's and men's clothing, Streubig discusses sustainability as a strategic element of the corporate strategy and provides information on how elements of the strategy are being implemented at Hugo Boss.

Rüdiger Senft, Head of Sustainability at Commerzbank, Frankfurt am Main, Germany, looks at the changing role of banks in financing the cotton market. In addition to a general introduction to the topic of sustainability and banking regulation, Senft's presentation deals with the financing of the cotton trade from a social and ecological point of view.
The opening session on 25 March is hosted by Bill Ballenden, founder and owner of Dragontree, Swindon, UK, an online auction platform for the cotton trade. As a former cotton manager for Louis Dreyfus in Europe and Asia, Bill Ballenden has many years of experience in the industry.

Cross-Cutting Issues: Digitalisation, Gender, Value Chains

The subsequent session in the conference programme with the headline “A Wider View” is devoted to currently defining trends and important cross-cutting issues in the industry. This goes far beyond classic cotton themes.

A lecture by Mark Messura, Senior Vice President, Global Supply Chain Marketing for Cotton Incorporated, Cary, North Carolina, deals with the role of cotton in an increasingly digitally controlled supply chain. Significant keywords here are faster delivery times, vertical integration, transparency and traceability.

The presentation by Roger Gilmartin, Managing Director of Tri-Blend Consulting, Charlotte, USA, entitled “The secret recipe for timely, cost-optimised and high-quality cotton clothing” promises exciting and enlightening insights. Tri-Blend Consulting conducts studies on the performance of different cotton varieties during the entire consumption process to the finished yarn and evaluates them from an economic point of view.

Amy Jackson, from the Better Cotton Initiative, London, UK, presents ICA Liverpool's “Women in Cotton” initiative. With this commitment, the initiative aims to increase the influence of women in the cotton industry and give them a stronger voice, for example by building networks in cooperation.

Navdeep Singh Sodhi, International Strategic Management Consultant at the Gherzi Textile Organisation, Switzerland, gives an insight into the current development of the value chain for cotton, textiles and clothing in Africa. Looking ahead to the coming decades, also in view of population growth, Africa is seen as having a high potential for building economic structures to improve income and prosperity.

Thomas Schneider, Professor at the University of Applied Sciences in Berlin and active in the field of production planning and control, textile materials and materials testing will host the session. A leading light in his field, Thomas Schneider has more than 30 years of experience in scientific and application-oriented research in the textile and fibre sector, including at the Fibre Institute Bremen e.V.

In the latest short film released on the Monforts YouTube Channel – captured at the recent Denim Première Vision show in London – some of the leading global manufacturers discuss their initiatives for more sustainable denim production.

Cone Denim, based in Greensboro, North Carolina, for example, can lay claim to having put in place its first environmental control measures back in the 1940s when the company first started recycling its water.

“It was a method of efficiency even back then, eighty years ago,” says Gabriel Magopat, of the company’s UK customer service centre, “but  producing high quality products is another method of being sustainable and of being efficient, and I think that’s what Cone stands for. We have an amazing history.”

Cone Denim is known for its signature S Gene® stretch denims which have traditionally incorporated polyester components to provide the stretch. It has now partnered with Intrinsic Advanced Materials of Gastonia, also in North Carolina, to introduce patent-pending CiCLO stretch polyester fibres into its denim collections. 

While still being synthetic based, CiCLO polyester is able to biodegrade in marine environments, wastewater treatment plants and landfill conditions, at rates similar to natural fibres like wool. 

This more sustainable solution for stretch is also being introduced to China for the first time by another leading denim supplier, Advance Denim.

“Advance Denim is spending its resources on being the most technologically advanced company in China, and also the most sustainable,” says Mark Ix, the company’s Director of Marketing. “We are investing heavily in our manufacturing to save both water and chemicals to create cleaner products.”

Monforts denim customer Berto is a family-owned company with its main denim mill in Bovolenta, a small rural town near to Padua in the north east of Italy, where respect for the environment has always been a must.

“The family has always been focused on respect for the environment,” says Berto’s Marketing Manager Francesca Palento. “In particular, we have a river next to the company from which we take our water for production and we then return it cleaner than it was before. We are also now producing GOTS and Global Recycling Standard jean produced with yarns made from our own internal waste production.”

Pakistan’s Soorty has recently received Cradle to Cradle Gold certification – the most stringent and exacting sustainable standard currently in existence – for its Pure D range of denims. These are produced using the company’s proprietary Zero Waste Water dyeing technology, in combination with the most advanced Monforts finishing machines. 

“Our very latest collection is called Climate Jeans, because every single product we now produce draws attention to the climate emergency we are living through right now,” says Eda Dikman, Soorty’s Marketing Communications Manager. “Sustainability is very important to us because we produce at scale and all of the actions we take reflect on the planet.”

Peruvian print business delivering DTG capabilities for prestigious apparel brands worldwide

Kornit Digital announced that Textil del Valle South America, a vertically integrated garment manufacturing company based in Peru, has chosen to implement Kornit’s digital direct-to-garment (DTG) printing technology at its 1.1 million-square-foot facility in Lima, Peru.

Textil del Valle services many of the world’s most prominent apparel brands, including global leaders in sports and athleisurewear.

“Kornit’s sustainable print technology provides the last piece of the puzzle, so we have the ‘full package’ for manufacturing the garment itself, imprinting it on demand based on the customer need, and shipping it ourselves, all from a single location,” said Juan Jose Cordova, General Manager at Textil del Valle. “Our market has been veering away from stocking shelves with inventory that may or may not sell, and the Kornit solution helps our business and customers eliminate that uncertainty and risk. We are the most sustainable textile plant in the world, and Kornit enables us to continue answering market demands in an efficient, responsible manner.”

“Authenticity wins: climbing business in a sustainable way” – the discussion targeted the importance of communication and transparency for today’s industry, promoting responsibility and innovation.

A selection of 26 fashion industry top players to discuss how digitalization is impacting companies’ value, one of the most important parameter to be considered when talking about business. This was the fifth edition of the CEO Roundtable, promoted by Fashion and eBusiness, which took place on November 7th at Palazzo Parigi, Milan.

The denim ingredient brand ISKO, always first in line when it comes to supporting the industry in the development of best practices, was among the event’s main partners. The company shared its long-standing and well-established commitment to Responsible Innovation™, taking part in a panel tackling new models to blend together authenticity and innovation and thus responsibly succeed in business.

Fashion Magazine CEO&Editor-in-chief Marc Sondermann hosted the discussion, which started at 9.20 a.m. and involved Elena Faleschini, ISKO Global Field Marketing Manager, along with Nicolas Bargi, Save the Duck Founder&CEO, Francesca Toninato, 7 For All Mankind CEO and Stefano Modellini, Diana E-commerce Corporation Founder&CEO.

Monforts will be part of the VDMA Textile Machinery Association’s forthcoming delegation to Pakistan which will take place from November 11th to 14th.

In total, 14 companies covering the entire textile chain are participating in the visit, which will showcase the benefits and technological innovations of German textile machinery at seminars held in both Karachi and Lahore.

A technical seminar in Karachi will be held at the Hotel Karachi Avari Towers on November 12th and a second in Lahore will be held on November 14th at the Hotel Avari Lahore Towers.

“The regions surrounding both of these cities have become major hubs for textile manufacturing, especially in areas such as home textiles and denim, where Monforts enjoys market-leading positions with its finishing systems,” says area sales manager Manfred Havenlith, who in addition to presenting at the seminars, will be holding meetings and networking with existing Monforts customers and potential new ones during the trip. “The Punjab region around Karachi, as Pakistan’s largest city, for example, is now dense with denim manufacturers, many of whom have already expressed keen interest in the new Monforts CYD continuous yarn dyeing system we introduced at ITMA 2019 in Barcelona in June.”