From the Sector

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

Production units with latest joining technologies for the filtration industry

The core competence of PFAFF Industriesysteme und Maschinen GmbH is the joining of flexible materials. The company not only masters industrial sewing applications, but has also been an innovation leader in textile welding applications for decades. Depending on the material and customer requirements, customer solutions are implemented using the ULTRASONIC, HOT-AIR or HOT WEDGE welding methods. In addition to the classical industries such as 'clothing, shoes, home and car upholstery', the company has made a name for itself as a specialist supplier of production solutions for the filter industry. Whether it be filters for dry filtration (dust removal, air conditioning and ventilation technology) or for liquid filtration, such as pleating filters, tube filters, stocking filters, pocket filters, bag filters, etc., the articles must first be assembled. In close dialogue with the customer, PFAFF defines the right joining technology and implements this in the machine or production line.

With the brands PFAFF INDUSTRIAL and KSL, the company has the necessary experience in process engineering, electrical engineering, automation technology and robotics to meet customer requirements for reliable, partly fully automatic solutions. A fully automatic production line for the manufacture of filter bags (with longitudinal seams) for an Asian customer is currently being manufactured in Kaiserslautern/Germany. At the heart of the system are the exchangeable hot-wedge welding and 3-thread chainstitch sewing units. Depending on the application, these can be implemented in the manufacturing process in just a few minutes. The raw material is unrolled, precisely formed and quickly and reliably fed to the sewing or welding unit. After joining, the 'tubes' are cut (filter length selectable via display) and automatically ejected. Optionally, the parts can be labelled using a printer. Depending on the material, the plant reaches a production speed of 10m/min.

Paper Converting Machine Company (PCMC), part of the Barry-Wehmiller Converting Solutions Platform, is joining with RDP Marathon Inc. and IPT Digital, and expanding its offerings for customers to include digital printing technology.

RDP Marathon has delivered engineered machine solutions for a variety of printing and packaging markets for 30 years. Through a partnership with IPT Digital, RDP Marathon also provides systems that convert existing presses into high-speed digital printing platforms, broadening its capabilities and reach across multiple packaging markets. Adding this innovative technology to PCMC’s portfolio of solutions not only will accelerate the company’s growth in its current markets, but also support its expansion into new markets, particularly the folded carton business.

In addition to launching its new and expanded website, A. Monforts Textilmaschinen GmbH & Co. KG has issued two new publications celebrating the achievements of its major customers.

The first edition of Monforts World of European Textiles profiles a range of companies at the forefront of manufacturing in Europe serving a wide range of end-use markets – from high-end silk and polyamide fabrics for the luxury brands to nonwovens and technical textiles for digital printing, protective clothing, wallcoverings and more.

The seventh edition of Monforts World of Denim meanwhile charts the latest developments from the global market leaders in denim production. Monforts enjoys a global lead in the supply of finishing technology for the denim industry and is currently extremely busy responding to the interest shown at ITMA 2019 in its new CYD yarn dyeing system for this market.

Both publications are now available to download from the new website at: https://www.monforts.de/en/latest-news-media/downloads/

At Munich Fabric Start, TINTEX introduces a new holistic approach to creating textiles that is built on the company’s DNA since 1998 for market leading, natural based, smart and responsible innovation

TINTEX is a unique fabric expert in materials and processes, and is introducing new levels of service to the market. First with the new Colorau® Natural Dye commercial innovation, and secondly with the TINTEX E-Commerce service that connects creativity with easy, direct-to-designer product sourcing.

The third innovation expands the company vision and influence into garment production with the SMART WARDROBE CO.LAB, a new supply chain cooperation working with three leading Portuguese makers.

But first you come and enjoy the unique touch and feel of the latest TINTEX Naturally Advanced fabrics with on-trend innovations enhanced by the new non-salt Colorau® Natural Dye process. This award-winning coloration technology fuses science, and creative innovation as a responsible evolution of better products that can now supply batches over 20kg.

The new A/W 20/21 collection starts from the concept of “WEME”: a Naturally Advanced offer that represents a multifaceted world. WE and ME refers to more than just the individual, but also about community and a collective spirit that seeks to grow the intellectual and spiritual individual needs in a responsive and collective way. It is a nuanced platform to discover a range of unique developments that embody the TINTEX identity through responsible innovation and creativity. Smart ingredients and processes drive innovation enhanced by the TINTEX unique dyeing and finishing expertise.

• Simple and cost-effective printing of stainless steel metal parts
• Reduces dramatically the potential hazard of handling fine metallic powders when compared to SLM or Binder Jetting
• Specially designed for open FFF 3D printers
• BASF begins the commercialization of Ultrafuse 316L with iGo3D, Ultimaker, and MatterHackers

With Ultrafuse 316L, BASF 3D Printing Solutions launches an innovative metal- polymer composite for Fused Filament Fabrication (FFF) into the market. It enables the safe, simple, and cost-efficient production of fully metal parts for prototypes, metal tooling, and functional metal parts in the simplest 3D printing process. After the subsequent industry-standard debinding and sintering, the final 3D printed part is 316L stainless steel.

Swiss textile innovator HeiQ launches new fluorocarbon-free (PFC-free) products in their HeiQ Eco Dry product family for a full range of durable water repellence (DWR) technologies, for outdoor apparel to footwear and fashion. The newly introduced products are durable to dry cleaning.

Consumers of water repellent jackets, pants and footwear think it is important that products are made of environmentally-friendly materials and are PFC-free1. HeiQ Eco Dry is a family of innovative, eco-friendly and PFC-free water repellent textile technologies that provide protection against water and water-based stains. As of August 2018, HeiQ Eco Dry has a brand awareness of 8% in the US among water repellent gear consumers1. By adding new products to the range, HeiQ now has a broad range of DWR solutions for outdoor apparel, footwear and fashion markets.

• Undergarments, pajamas and bed linens tested for months
• Moisture management of fibers reduce sweating and hence itching
• Soft and smooth fibers lead to fewer skin injuries

The Lenzing Group has been providing both financial support and textiles made of its fibers to DEBRA Austria, the patient organization for “butterfly children”. The TENCEL™ branded lyocell and modal fibers which are being used are particularly soft and smooth and therefore very skin-friendly. In turn, they help to improve the quality of life for the “butterfly children”.

In recent months, several patients with the skin disorder Epidermolysis Bullosa (EB) have tested leggings, undergarments, pajamas, leggings, quilts and bed linens made of TENCEL™ fibers and have found them to be comfortable and skin-friendly. The skin of EB patients is fragile like the wings of a butterfly. For this reason, coarse fibers, scratching seams, buttons, zippers and fibers which hardly or do not at all absorb sweat frequently lead to additional blisters and sores and increased itching. In contrast, TENCEL™ fibers feature particularly good moisture management and thus support the nature temperature-regulating properties of the body.

Following significant investment in the R&D capabilities at its base in Ulricehamn, Sweden, IRO AB introduced a range of new Industry 4.0-ready weft yarn feeding and tension control innovations for weaving looms at the recent ITMA 2019 in Barcelona, Spain.

JEC Asia is the major, most insightful composites event in Asia-Pacific for products, solutions, net-working, and advanced industry thinking - 3 full days of Business, Innovation & Knowledge

JEC ASIA KEY FIGURES

• 7,000+ professional visits
• 245+ exhibiting companies from 49 countries
• 3 conference sessions
• 40+ International speakers
• 450+ business meetings
• Startup Booster competition
• Innovation awards and planet
• In parallel to eMove360° Asia

Paris - For its 12th edition and third time in Seoul, JEC Asia 2019 will gather companies from the entire composites value chain in Asia Pacific to present their latest capabilities and innovations to the composites community and the strategic end-user’s market including: Mobility, Aeronautics, Building & Construction. This year more than 245 exhibiting companies are expected with thousands of professionals from 49
countries to network, exchange ideas, explore new opportunities and strengthen their business partnerships.

Addressing the impact of composites in Mobility 4.0

During the press conference held in Seoul on July 9th to introduce JEC Asia 2019 and eMove Asia 360° main features, a roundtable gathering speakers, experts and academics from prestigious Korean research centers specialized in carbon and composites — along with Hyundai Motor and KCTech composites experts, eMove360°’s CEO & Publisher and Korean Electric Vehicle Association representatives — exchanged their views on the impact of composites in today's and tomorrow's mobility in the world with a focus on the Korean market. Discussions centered around the challenges raised by Mobility 4.0 (electric connected and autonomous vehicles) and how composites can offer highly adapted solutions for the new challenges faced by this sector, particularly in the context of the rising electrification of vehicles.

Hence, the 2019 edition of JEC Asia will welcome for the first time the eMove360° ASIA exhibition and conferences focusing on Trends in electric & autonomous mobility, Battery & Powertrain and Charging & Energy.

Celebrating Innovation and Knowledge

JEC Asia 2019 will also host the 2nd leg of the JEC Startup Booster competition, the leading startup competition in the world of composites will enable companies to find and assess innovations with a potential impact on their respective industry. The 10 finalists selected in the region by a prestigious jury, will pitch their project to win a chance to showcase their work at JEC World 2020 in Paris. The JEC Innovation Awards is a long-established and worldwide program with 3 simple goals: identify, promote and reward the most innovative composite solutions in the world. Over the past 15 years, the JEC Innovation Program has involved 1,800 companies worldwide; 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations. The award ceremony will take place on the second day of JEC Asia, on November 14th, 2019.

JEC Asia 2019 will also feature a fulfilling conference program with experts from the industry giving their insights on the latest developments in high-performance composite technologies and applications.

JEC Asia 2019 conferences main themes will focus on:

• International Carbon Festival Conference organized with our partner, KCTech.
• Automotive composite golden triangle: low CAPEX, low cost but high volume
• Automotive hybrid solutions: take the best of each material
• Aeronautics: faster processes and new materials
• Business opportunities (Raw materials, Process, Application, Countries, Region)
Finally, JEC Asia offers the opportunity to visit Composites sites. This year professionals will live a full experience of South Korea composites Industry visiting: Hanyang University, Kookmin University with Hankuk Carbon, Win & Win Co or Korean Carbon with KCTech in Jeonju.

See you @JEC Asia 2019 and eMove360° Asia, November 13 to 15,  Seoul Coex Convention and Exhibition Center