From the Sector

Reset
1525 results
Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG

Bemberg™ Natural Stretch linings by Gianni Crespi Foderami : “the preciousfabric that naturally stretches without tricks” (c) Bemberg™
Bemberg™ Natural Stretch by Gianni Crespi Foderami s.r.l
27.07.2020

Bemberg™ Natural Stretch linings by Gianni Crespi Foderami

  • “the preciousfabric that naturally stretches without tricks”

Bemberg™ Natural Stretch, the ground-breakingprecious fabric by Gianni Crespi Foderami s.r.l. is the 100% sustainable lining fabric created from a cutting-edge highly engineered process Specialized  in  the  creation  of linings for high quality menswear,   womenswear   and childrenwear,  Gianni  Crespi Foderami  s.r.l.has  teamed  up with Bemberg™, the Japanese brand of regenerated cellulose fibers by leading    materials manufacturer  Asahi  Kasei, to develop a precious 100% Bemberg™ lining with outstanding stretch performance  woven in its DNA.

  • “the preciousfabric that naturally stretches without tricks”

Bemberg™ Natural Stretch, the ground-breakingprecious fabric by Gianni Crespi Foderami s.r.l. is the 100% sustainable lining fabric created from a cutting-edge highly engineered process Specialized  in  the  creation  of linings for high quality menswear,   womenswear   and childrenwear,  Gianni  Crespi Foderami  s.r.l.has  teamed  up with Bemberg™, the Japanese brand of regenerated cellulose fibers by leading    materials manufacturer  Asahi  Kasei, to develop a precious 100% Bemberg™ lining with outstanding stretch performance  woven in its DNA.

Bemberg™ Natural    Stretch was   achieved   thanks   to the leading  Italian  manufacturer’s ability  to  vertically  set  up,  control,  engineer  and  design  a  whole  integrated  production process, ranging from sectional warping the shipment service.Bemberg™  Natural  Stretch  achieve  maximum  flexibility,  resistance,  and  comfort  without the use of elastomers and polyesters. How? The secret is in the process indeed.Elasticity is achieved thanks to a complex way of yarn twisting, weaving, and finishing.Bemberg™  yarns  are  smart,  responsible  and  high-tech.  Made  from  a  cotton  linter  bio-utility material,  the  natural  derived  source  does  not  deplete  forestry  resources. 

The company’s matchless, high-tech natural fibers are characterized by a unique touch and feel as well as unique performances such as moisture control and is antistatic.Bemberg™Natural Stretch: a smart solution for contemporary living.

Source:

GB Network

Oerlikon Barmag: Largest single industrial yarn order (c) Oerlikon Barmag
And the new Oerlikon Barmag systems at Fujian Billion will also be used to manufacture yarns for the automotive sector.
23.07.2020

Oerlikon Barmag: Largest single industrial yarn order

  • Textile yarn manufacturer Fujian Billion kicks off industrial yarn production

Remscheid – from the end of this year, the southern Chinese yarn manufacturer Fujian Billion Polymerization Technology Industrial Co., Ltd. will be producing industrial yarns using systems supplied by Oerlikon Barmag. With this, the company – considered to be the largest polyester yarn manufacturer in southern China – is now also entering the industrial yarn market.

With 124 positions and a capacity of around 250,000 tons per annum, this project is the largest single industrial yarn order placed with Oerlikon Barmag to date. And with this order, the southern Chinese yarn manufacturer instantly positions itself as one of the ten largest Chinese industrial yarn producers. “The systems at Fujian Billion come with our latest draw unit design, which has been optimized for use with Oerlikon Barmag automation solutions”, comments Roy Dolmans, Head of Development for the Industrial Yarn Process. As a result, the newcomer in the industrial yarn sector is now superbly equipped for the future.

  • Textile yarn manufacturer Fujian Billion kicks off industrial yarn production

Remscheid – from the end of this year, the southern Chinese yarn manufacturer Fujian Billion Polymerization Technology Industrial Co., Ltd. will be producing industrial yarns using systems supplied by Oerlikon Barmag. With this, the company – considered to be the largest polyester yarn manufacturer in southern China – is now also entering the industrial yarn market.

With 124 positions and a capacity of around 250,000 tons per annum, this project is the largest single industrial yarn order placed with Oerlikon Barmag to date. And with this order, the southern Chinese yarn manufacturer instantly positions itself as one of the ten largest Chinese industrial yarn producers. “The systems at Fujian Billion come with our latest draw unit design, which has been optimized for use with Oerlikon Barmag automation solutions”, comments Roy Dolmans, Head of Development for the Industrial Yarn Process. As a result, the newcomer in the industrial yarn sector is now superbly equipped for the future.

The well-known company – located in the Chinese Fujian Province – will be predominantly manufacturing high-tenacity (HT) and low-shrinkage (LS) yarns from the end of this year. These sophisticated yarns are deployed both in the automotive, geotextiles and safety sectors (HT yarns) and in the manufacture of coated industrial textiles such as truck tarpaulins and tents (LS yarns).

Founded in Jinjiang, Quanzhou, in 2003, Fujian Billion Polymerization Technology Industrial Co., Ltd. is one of the top 500 privately-owned enterprises in China. Annually, the yarn manufacturer produces around 2.8 million tons of filament yarn and ethylene-propylene side-by-side (ES) fibers.

21.07.2020

ITM 2021: Accelerating the Textile Sector that Has Become Stationary Due to Pandemic

The ITM 2021 Exhibition, which is postponed to 22-26 June 2021 due to the coronavirus pandemic outbreak, will direct the world and Turkish textile industry, which will demonstrate a vigorous comeback in the post-pandemic period.

The ITM Exhibition, which was planned to be held between 2-6 June this year, was postponed to 22-26 June 2021 due to the troublesome Coronavirus pandemic. Participating companies in countries that had to interrupt their production, especially Italy, France, Spain, Germany and China, which were most affected by the virus, welcomed the postponement of the ITM Exhibition. The countries, holding similar opinions that it is not possible to save from the pandemic without effective drug treatment or vaccine against coronavirus, started normalization process by increasing their protective measures while fighting against the pandemic.

The ITM 2021 Exhibition, which is postponed to 22-26 June 2021 due to the coronavirus pandemic outbreak, will direct the world and Turkish textile industry, which will demonstrate a vigorous comeback in the post-pandemic period.

The ITM Exhibition, which was planned to be held between 2-6 June this year, was postponed to 22-26 June 2021 due to the troublesome Coronavirus pandemic. Participating companies in countries that had to interrupt their production, especially Italy, France, Spain, Germany and China, which were most affected by the virus, welcomed the postponement of the ITM Exhibition. The countries, holding similar opinions that it is not possible to save from the pandemic without effective drug treatment or vaccine against coronavirus, started normalization process by increasing their protective measures while fighting against the pandemic.

More information:
ITM textile machinery fair
Source:

ITM

Hygiene Austria LP GmbH is prepared with an online shop for the reintroduction of the mask requirement (c) Lenzing AG
Hygiene Austria LP GmbH Logo
21.07.2020

Hygiene Austria LP GmbH is prepared with an online shop for the reintroduction of the mask requirement

  • With shop.hygiene-austria.at, quick access to MNS, FFP2 and child masks “made in Austria” is guaranteed.

Wiener Neudorf – Hygiene Austria LP GmbH has become known for its locally produced mouth-nose protective masks, FFP2 and children's masks during the COVID-19 crisis. The company is now well prepared for the reintroduction of the mask requirement. “Especially in times of a pandemic, it is important to us at Hygiene Austria to make a contribution to the security of Austrian supply”, said Stephan Trubrich, Managing Director of Hygiene Austria LP GmbH, confidently.

All interested parties who want to prepare for their purchases in the supermarkets or their visit to public facilities but also for their holiday trips can now purchase masks of different types at the following website: https://shop.hygiene-austria.at.

  • With shop.hygiene-austria.at, quick access to MNS, FFP2 and child masks “made in Austria” is guaranteed.

Wiener Neudorf – Hygiene Austria LP GmbH has become known for its locally produced mouth-nose protective masks, FFP2 and children's masks during the COVID-19 crisis. The company is now well prepared for the reintroduction of the mask requirement. “Especially in times of a pandemic, it is important to us at Hygiene Austria to make a contribution to the security of Austrian supply”, said Stephan Trubrich, Managing Director of Hygiene Austria LP GmbH, confidently.

All interested parties who want to prepare for their purchases in the supermarkets or their visit to public facilities but also for their holiday trips can now purchase masks of different types at the following website: https://shop.hygiene-austria.at.

Source:

Lenzing Aktiengesellschaft

AFFIX Labs launches world’s first long-lasting surface treatment to kill the coronavirus © 2020 AFFIX Labs
Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact. Si-Quat by AFFIX Labs can be implemented onto any surface.
20.07.2020

AFFIX Labs launches world’s first long-lasting surface treatment to kill the coronavirus

  • Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
     

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

  • Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
     

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

“Tragedies have unfolded across the globe, affecting different countries at varying degrees. The second waves of COVID-19 are just appearing on the horizon. This long-lasting surface treatment is a viable, accessible solution across cultures. By killing the COVID-19 pathogen on surfaces before it can infect people, the Si-Quat solution is a game changer. It can provide increased security and peace of mind to your communities, as well as your customers,” says Tom Sam, CEO of AFFIX Labs.

Si-Quat has been tested to kill 99.99% of microbes within minutes, while still being fully safe to touch. Proven to be effective for about a month on frequently touched surfaces, it is the longest lasting anti-viral surface treatment available to reduce the spread of the novel coronavirus. The product is non-corrosive, free from silver salts and heavy metal nanoparticles, and perfectly safe to touch.

Several major agencies around the globe have already accepted quaternary ammonium, the main ingredient in the surface coating, to be an effective surface treatment against the novel coronavirus, including the World Health Organization (WHO), the US Environmental Protection Agency, the American Chemistry Council (ACC) and the European Chemical Agency (ECHA).

Si-Quat was invented in January 2020 by the AFFIX Labs’ Repeltec development team to specifically help combat the COVID-19 outbreak. The product is based on the trusted and safe disinfectant quaternary ammonium, which is chemically bound to align silane quaternary ammonium molecules (silane quats) in a highly effective manner. Positively charged nitrogen particles then actively attract viruses and bacteria, penetrating the membranes and killing them within minutes.

Rigorous testing has shown Si-Quat to adhere to almost any surface, performing as the most durable surface treatment commercially available. Due to its incredibly strong layer, the solution only wears down on surfaces after thousands of touches or multiple cleaning cycles. This means that on heavily used surfaces, such as door handles and counters, Si-Quat will be effective for about a month. On rarely touched surfaces like walls, it has the potential to protect for years. Since the product is incredibly easy to apply, technicians require minimal training and only basic protection. They simply have to brush or spray Si-Quat onto the surface and allow it to dry for 6 hours.

“Other sanitising solutions require reapplication to every surface several times daily, interrupting business operations. This results in additional costs and disruptions at a time when many companies are already struggling,” Sam explains. “By combining proven efficacy, safety and long durability, Si-Quat is emerging as an important weapon in the battle against the spread of COVID-19.”

AFFIX Labs has begun to roll out the distribution of Si-Quat across the globe, with new regions being serviced every week. It is currently looking for distribution partners in local markets.

The project leading to the development of Si-Quat included funding from the European Institute of Innovation and Technology, a body of the European Union, under the Horizon 2020 Framework for Research and Innovation.

20.07.2020

Lenzing once again gold status in the sustainability rating of EcoVadis

For the third time in a row, the Lenzing Group was awarded gold status in the EcoVadis CSR rating. The assessment is further evidence that the company is one of the top performers in the field of sustainability worldwide.

Lenzing is thus one of the leading two percent of all assessed companies in its industry.
The assessment covers the four most important CSR (Corporate Social Responsibility) practices:

  • environment
  • fair working conditions and human rights
  • ethics and sustainable procurement

“This award makes us very proud and encourages us to continue on our path to becoming a provider of environmentally friendly specialty fibers. At Lenzing, we look beyond fibers and take responsibility for our children and grandchildren by
standing up resolutely against the shortcomings of our time. This attitude is part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and society”, says Stefan Doboczky, CEO of the Lenzing Group.

For the third time in a row, the Lenzing Group was awarded gold status in the EcoVadis CSR rating. The assessment is further evidence that the company is one of the top performers in the field of sustainability worldwide.

Lenzing is thus one of the leading two percent of all assessed companies in its industry.
The assessment covers the four most important CSR (Corporate Social Responsibility) practices:

  • environment
  • fair working conditions and human rights
  • ethics and sustainable procurement

“This award makes us very proud and encourages us to continue on our path to becoming a provider of environmentally friendly specialty fibers. At Lenzing, we look beyond fibers and take responsibility for our children and grandchildren by
standing up resolutely against the shortcomings of our time. This attitude is part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and society”, says Stefan Doboczky, CEO of the Lenzing Group.

Lenzing’s ambitious climate target represents an important component of the company’s strategy and the responsibility towards future generations. In the 2019 financial year, Lenzing became the world’s first producer of wood-based cellulosic fibers to strategically commit to a climate-neutral production. This vision is to be put into practice by 2050. By 2030, the company aims to achieve an interim goal of reducing emissions by 50 percent per ton of product compared to 2017.

In 2019, Lenzing was once again rated number one in the world in the “Hot Button Report” of the Canadian NGO Canopy, another highly regarded ranking. In this ranking, Canopy grades the world’s 32 largest producers of wood-based fibers with respect to their success in achieving sustainable wood and pulp sourcing.

 

U.S. Cotton Trust Protocol (c) U.S. Cotton Trust Protocol
15.07.2020

U.S. Cotton Trust Protocol: new traceability tool for US cotton

Starting midth of July, brands and retailers can join the U.S. Cotton Trust Protocol, a new system for responsibly grown cotton that will provide annual data for six areas of sustainability in line with the UN Sustainability Goals. This year-on-year data available for the first time will allow brands and retailers to better measure progress towards meeting sustainability commitments.

The Trust Protocol underpins and verifies sustainability progress through sophisticated data collection and independent third-party verification. By working with Field to Market: The Alliance for Sustainable Agriculture and Control Union Certifications North America, the Trust Protocol enables brands and retailers to better track the cotton entering their supply chain. Brands who become members of the Trust Protocol will have access to aggregate year-over-year data on water use, greenhouse gas emissions, energy use, soil carbon and land use efficiency.

The Trust Protocol is a complement to existing sustainability programs and is designed from the ground up to fit the unique cotton mass-growing environment of the United States.

Starting midth of July, brands and retailers can join the U.S. Cotton Trust Protocol, a new system for responsibly grown cotton that will provide annual data for six areas of sustainability in line with the UN Sustainability Goals. This year-on-year data available for the first time will allow brands and retailers to better measure progress towards meeting sustainability commitments.

The Trust Protocol underpins and verifies sustainability progress through sophisticated data collection and independent third-party verification. By working with Field to Market: The Alliance for Sustainable Agriculture and Control Union Certifications North America, the Trust Protocol enables brands and retailers to better track the cotton entering their supply chain. Brands who become members of the Trust Protocol will have access to aggregate year-over-year data on water use, greenhouse gas emissions, energy use, soil carbon and land use efficiency.

The Trust Protocol is a complement to existing sustainability programs and is designed from the ground up to fit the unique cotton mass-growing environment of the United States.

Last month the Trust Protocol was added to Textile Exchange’s list of 36 preferred fibres and materials that more than 170 participating brands and retailers can select from as part of Textile Exchange’s Material Change Index programme.

More information:
cotton supply chain traceability
Source:

Hill+Knowlton Strategies GmbH

Oerlikon Nonwoven meltblown technology meanwhile in demand across the globe (c) Oerlikon
Daniel Günther (2nd from left), Schleswig-Holstein’s Minister President, together with Rainer Straub, Head of Oerlikon Nonwoven, Matthias Pilz, Head of Oerlikon Neumag, and Matthias Wäsch, Chairman of the Works Council, at the tour of the Neumünster site where the Oerlikon Nonwoven meltblown technology – currently in huge demand across the globe – is manufactured.
08.07.2020

Oerlikon Nonwoven meltblown technology meanwhile in demand across the globe

  • Schleswig-Holstein Minister President visits Neumünster, Germany


Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at the Oerlikon Nonwoven business unit of the Swiss Oerlikon Group. From the manufacturing site in Neumünster, Germany, the high-tech meltblown systems – with their patented ecuTE+ nonwovens electro-charging technology – are meanwhile be exported all over the world. For the very first time, a contract has now been signed with a business in Australia. Today, Schleswig-Holstein’s Minister President Daniel Günther was won over on site by the technology of a ‘global player’. Rainer Straub, Head of Oerlikon Nonwoven, was thrilled, stating: “The machines and systems for manufacturing manmade fiber and nonwovens solutions from Neumünster enjoy an outstanding reputation throughout the world. It is especially in this crisis that the technology from Schleswig-Holstein has proven itself to be absolutely world-class.”

  • Schleswig-Holstein Minister President visits Neumünster, Germany


Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at the Oerlikon Nonwoven business unit of the Swiss Oerlikon Group. From the manufacturing site in Neumünster, Germany, the high-tech meltblown systems – with their patented ecuTE+ nonwovens electro-charging technology – are meanwhile be exported all over the world. For the very first time, a contract has now been signed with a business in Australia. Today, Schleswig-Holstein’s Minister President Daniel Günther was won over on site by the technology of a ‘global player’. Rainer Straub, Head of Oerlikon Nonwoven, was thrilled, stating: “The machines and systems for manufacturing manmade fiber and nonwovens solutions from Neumünster enjoy an outstanding reputation throughout the world. It is especially in this crisis that the technology from Schleswig-Holstein has proven itself to be absolutely world-class.”

In addition to a tour of the meltblown system and its assembly and production facilities, the visit by Minister President Daniel Günther had one purpose above all: the dialog between politicians and business. Rainer Straub, Head of Oerlikon Nonwoven, and Matthias Pilz, Head of Oerlikon Neumag, jointly expressed their thanks for the support that Oerlikon has repeatedly had the fortune to experience over the past months and years in Schleswig-Holstein and looked to the future full of hope. “As a result of our additional investment at the site here in Neumünster – be this in our new technology center that will be completed by the end of this year or in our new logistics center that is already operating – we, as one of the region’s largest employers, are continuing to move forward, supported by a State Government that is also focusing on both promoting industry and business and on advancing an efficient training and educational system, as innovation is only possible with outstanding engineers”, stated Matthias Pilz. And Rainer Straub directed his appeal specifically at the Minister President: “Treat education and training as a priority. Ultimately, they will secure the future of Schleswig-Holstein as a center of excellence and manufacturing!”

Five-million-euro digitalization program

Daniel Günther, the incumbent Minister President of Schleswig-Holstein since 2017, immediately responded, making reference to one of the Federal State’s current training initiatives: “The State Government is supporting higher education institutions and students in the present coronavirus crisis. With a five-million-euro digitalization program, we are investing on the long-term digitalization of our higher education institutions. With this, we are overall creating a future for young people, particularly also for those who could very well go on to invent the next generation of manmade fiber systems.” And the Minister President was just as impressed by the willingness and readiness with which Oerlikon has been providing high-level support since the beginning of the COVID-19 pandemic to master the present challenges as he was with the company’s meltblown technology itself. Rainer Straub explained: “When, at the beginning of the pandemic in February, demand for protective face masks increased rapidly, we at Oerlikon Nonwoven responded immediately. We ramped up all the available production capacities here in Neumünster in order to quickly manufacture nonwovens for producing face masks using our laboratory systems. As a result, we have been able to make a small, regional contribution to covering demand. In parallel, we have pulled out all the stops in order to systematically further expand our skills as machine and system builders so as to cater to the initially expected, and now also continuing, global demand for meltblown systems as quickly as possible.”

Leading meltblown technology

The Oerlikon Nonwoven meltblown technology – with which nonwovens for protective masks can also be manufactured, among other things – is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from plastic fibers. The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon Nonwoven systems. “Ever more manufacturers in the most diverse countries are hoping to become independent of imports. Therefore, what we are experiencing in Germany is also happening in both industrialized and emerging countries throughout the world”, commented Rainer Straub. In addition to China, Turkey, the United Kingdom, South Korea, Austria and numerous countries in both North and South America, Australia and not least Germany will for the first time also be among the countries to which Oerlikon Nonwoven will be delivering machines and equipment before the end of 2021.

TMAS members ready to support digital textile transformations, post Covid-19 (c) TMAS
TMAS Secretary General Therese Premler-Andersson.
08.07.2020

TMAS members ready to support digital textile transformations, post Covid-19

  • Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

  • Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

Amongst them are TMAS members of the ACG Group, who quickly established a dedicated new nonwovens fabric converting and single-use garment making-up plant to supply to the Swedish health authorities. From a standing start in March, this is now producing 1.8 million square metres of converted fabric and turning it into 692,000 finished medical garments each month.

“In 2020 so far, we have seen new value chains being created and a certain amount of permanent reshoring is now inevitable,” says Premler-Andersson. “This is being backed by the new funding announced in the European Union’s Next Generation EU plan, with €750 billion marked for helping industry recover. As the European Commission President Ursula von der Leyen has stressed, “green and digital” transitions hold the key to Europe’s future prosperity and resilience, and TMAS members have new solutions to assist in both areas.”

Remote working

Automated solutions have opened up many possibilities for remote working during the pandemic. Texo AB, for example, the specialist in wide-width weaving looms for the paper industry, was able to successfully complete the build and delivery of a major multi-container order between April and May.

“Our new Remote Guidance software now makes it possible for us to carry out some of the commissioning and troubleshooting of such new lines remotely, which has been helpful” says Texo AB President Anders Svensson.

Svegea of Sweden, which has spent the past few months developing its new CR-210 fabric relaxation machine for knitted fabrics, has also successfully set up and installed a number of machines remotely, which the company has never attempted before.

“The pandemic has definitely led to some inventive solutions for us and with international travel currently not possible, we are finding better methods of digital communication and collaboration all the time,” says Svegea managing director Hakan Steene.

Eric Norling, Vice President of the Precision Application business of Baldwin Technology, believes the pandemic may have a more permanent impact on global travel.

“We have now proven that e-meetings and virtual collaboration tools are effective,” he says. “Baldwin implemented a home office work regime from April with only production personnel and R&D researchers at the workplace. These past few months have shown that we can be just as effective and do not need to travel for physical meetings to the same extent that was previously thought to be necessary.”

Pär Hedman, Sales and Marketing Manager for IRO AB, however, believes such advances can only go so far at the moment.

“Video conferences have taken a big leap forward, especially in development projects, and this method of communication is here to stay, but it will never completely replace personal meetings,” he says. “And textile fabrics need to be touched, examined and accepted by the senses, which is impossible to do via digital media today. The coming haptic internet, however, may well even change that too.”

Social distancing

The many garment factories now equipped with Eton Systems UPS work stations – designed to save considerable costs through automation – have meanwhile benefited from the unintentional social distancing they automatically provide compared to factories with conventional banks of sewing machines.

“These companies have been able to continue operating throughout the pandemic due to the spaced nature of our automated plant configurations,” says Eton Systems Business Development Manager Roger Ryrlén. “The UPS system has been established for some time, but planned spacing has proved an accidental plus for our customers – with improved productivity.”

“Innovations from TMAS member companies have been coming thick and fast recently due to their advanced know-how in automation concepts,” Premler-Andersson concludes.  “If anything, the restrictions imposed by the Covid-19 pandemic have only accelerated these initiatives by obliging our members to take new approaches.”

First Oerlikon Nonwoven meltblown technology plant sold to Australia (c) Oerlikon Nonwowen
In times of Corona: Online contract signing between Oerlikon Nonwoven and OZ Health Plus for the new order of an Oerlikon Nonwoven meltblown line for Australia.
07.07.2020

First Oerlikon Nonwoven meltblown technology plant sold to Australia

  • Australian production of medical masks to commence from April 2021 with Oerlikon Nonwoven meltblown technology

Neumünster/Germany, Brisbane/Queensland/Australia – Queensland company OZ Health Plus will establish Australia’s first manufacturing plant to make the critical fine plastic material used in most protective face masks. OZ Health Plus has purchased a plant of the Swiss-based technology company Oerlikon to establish a Queensland-based production plant for spun-bond and meltblown nonwovens. These fabrics are essential for Australia’s face mask manufac-turers, who currently produce about 500 million medical and industrial masks per year. However the fabrics have to be imported from overseas and access to these materials has been severely disrupted during the COVID-19 pandemic.

  • Australian production of medical masks to commence from April 2021 with Oerlikon Nonwoven meltblown technology

Neumünster/Germany, Brisbane/Queensland/Australia – Queensland company OZ Health Plus will establish Australia’s first manufacturing plant to make the critical fine plastic material used in most protective face masks. OZ Health Plus has purchased a plant of the Swiss-based technology company Oerlikon to establish a Queensland-based production plant for spun-bond and meltblown nonwovens. These fabrics are essential for Australia’s face mask manufac-turers, who currently produce about 500 million medical and industrial masks per year. However the fabrics have to be imported from overseas and access to these materials has been severely disrupted during the COVID-19 pandemic.

Oerlikon’s German-based business unit Oerlikon Nonwoven has now executed legal and commercial arrangements to supply the specialised machinery which can manufacture the nonwoven material lo-cally. The same machinery is used to make almost all face masks material manufactured in Europe. The world-leading Oerlikon Nonwoven meltblown plant will commence operations in April next year, with a second stage planned for late 2021.

The Oerlikon Nonwoven plant can produce meltblown fabrics for 500 million masks per year, along with other medical and non-medical grade products, filtration products, sanitary items, antiseptic wipes and more. Rainer Straub, Head of Oerlikon Nonwoven said: “We are very proud that we can now for the first time supply our Oerlikon Nonwoven meltblown technology to Australia. Due to the short delivery time, we hope to make our contribution to the Australian population and their safe sup-ply of high-quality protective masks as soon as possible.”

Queensland company secures manufacturing plant for the only Australian production of critical face mask material

OZ Health Plus director Darren Fooks said: “Australia has access to raw polypropylene feedstock but lacks the plant to convert that raw material to specialised spunbond and meltblown fabrics. These fabrics are essential for local mask manufacturing. The Australian-based Oerlikon Nonwoven plant will fill the production chain gap for Australia by producing the fabrics we need for mask production and many other products – it will reduce Australia’s protective mask supply chain from thousands of kilo-metres, to tens of kilometres.”

“Our decision in favor of Oerlikon Nonwoven was a given once we had analyzed the material samples. It was a matter of course for us that the Business Unit of the Oerlikon Manmade Fibers segment could supply high-quality machines and systems”, added Darren Fooks.

OZ Health Plus’ new facilities will take up 15,000 m2 of manufacturing space and will employ 100 full-time roles once the second stage of the project is complete. OZ Health Plus continues to work with both Queensland and Federal Government stakeholders and values their support in bringing this vital capability to Queensland.

Leading meltblown technology

Oerlikon Nonwoven meltblown technology, which can also be used to produce nonwovens for protec-tive masks, is recognized in the market as the technically most efficient method of producing high-separation filter media from plastic fibers. Most of the protective mask capacities available in Europe to date are produced on Oerlikon Nonwoven equipment.

Source:

Andre Wissenberg
Marketing, Corporate Communications & Public Affairs

07.07.2020

Sustainable fashion: How are the leaders in fast fashion doing? Post-COVID-19 survey

  • 10% of their offer is eco-responsible.
  • Sustainable cotton is a priority for retailers for the coming years.
  • Sustainable garments cheaper than standard garments.

Brands are prepared for the new health protection rules and have reopened their stores. But aside from the direct impact of the COVID-19 epidemic, is the fashion market ready to respond to customers’ desire to act by changing their spending habits?

Based on analyses by Retviews, a recently acquired startup, Lectra has produced a survey of sustainable fashion among the leading fast fashion brands*.

The COVID-19 crisis has given many people the desire to live more meaningfully and to act more responsibly. The crisis period could be seen as the catalyst that forces the fashion industry to change the way it designs, produces and distributes its products. Since, for consumers, buying is a way of expressing a commitment and affirming their values, brands have an incentive to change their offer in preparation for the future, by taking a more eco-responsible, authentic and transparent approach.

  • 10% of their offer is eco-responsible.
  • Sustainable cotton is a priority for retailers for the coming years.
  • Sustainable garments cheaper than standard garments.

Brands are prepared for the new health protection rules and have reopened their stores. But aside from the direct impact of the COVID-19 epidemic, is the fashion market ready to respond to customers’ desire to act by changing their spending habits?

Based on analyses by Retviews, a recently acquired startup, Lectra has produced a survey of sustainable fashion among the leading fast fashion brands*.

The COVID-19 crisis has given many people the desire to live more meaningfully and to act more responsibly. The crisis period could be seen as the catalyst that forces the fashion industry to change the way it designs, produces and distributes its products. Since, for consumers, buying is a way of expressing a commitment and affirming their values, brands have an incentive to change their offer in preparation for the future, by taking a more eco-responsible, authentic and transparent approach.

While these factors were apparent before the pandemic, they have now become the key to interacting with consumers wanting a more responsible offer. The era of the consumer activist, long heralded without actually becoming a reality, is now here, and brands must adapt in response.

*Please read the attached document for more information

More information:
Lectra, PLM Covid-19 Retviews
Source:

Lectra Headquarters / Press Department

Digitak services always in fashion with Mimaki sublimation and direct printing (c) Mimaki
Filippo Taccani, founder and owner at Digitak, in the company’s production department, surrounded by an arsenal of Mimaki’s printing solutions.
01.07.2020

Digitak services always in fashion with Mimaki sublimation and direct printing

  • Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
  • With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

  • Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
  • With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

 

Source:

Mimaki Europe B.V.

Sateri Joins Fashion Industry Charter for Climate Action, Pledges Ambitious Climate Change Goals and Steps Up Industry Engagements (c) Sateri
01.07.2020

Sateri Joins Fashion Industry Charter for Climate Action, Pledges Ambitious Climate Change Goals and Steps Up Industry Engagements

Shanghai - Sateri has signed the Fashion Industry Charter for Climate Action, becoming the first viscose producer in China to support this global fashion agenda. An initiative convened by the United Nations Framework Convention on Climate Change (UNFCCC), this charter calls on the fashion industry to support the goals of the Paris Agreement in limiting global temperature rise to well below two degrees Celsius above pre-industrial levels, by achieving 30 per cent aggregate reduction in greenhouse gas (GHG) emissions by 2030, including the supply chain.

Niclas Svenningsen, Manager of Global Climate Action, UNFCCC, said, “UNFCCC is excited to have Sateri joining the Fashion Industry Charter on Climate Action and committing towards global climate action as the first Chinese viscose producer to do so. We hope that it will inspire more textile companies from China to join and take action.”

Shanghai - Sateri has signed the Fashion Industry Charter for Climate Action, becoming the first viscose producer in China to support this global fashion agenda. An initiative convened by the United Nations Framework Convention on Climate Change (UNFCCC), this charter calls on the fashion industry to support the goals of the Paris Agreement in limiting global temperature rise to well below two degrees Celsius above pre-industrial levels, by achieving 30 per cent aggregate reduction in greenhouse gas (GHG) emissions by 2030, including the supply chain.

Niclas Svenningsen, Manager of Global Climate Action, UNFCCC, said, “UNFCCC is excited to have Sateri joining the Fashion Industry Charter on Climate Action and committing towards global climate action as the first Chinese viscose producer to do so. We hope that it will inspire more textile companies from China to join and take action.”

As a signatory of the Charter, Sateri looks forward to participating in relevant Working Groups which bring together stakeholders and experts in the fashion and textile sectors. In recent months, Sateri has joined several other leading industry multi-stakeholder associations. These include the Sustainable Apparel Coalition (SAC), China Association of Circular Economy (CACE), and the European Disposables and Nonwovens Association (EDANA).

Allen Zhang, President of Sateri, said, “Sateri is committed to growing our business as sustainably as we can. Our adoption of the Fashion Charter goals is a bold leap but we believe that pushing the boundaries is necessary. We are also stepping up on our engagement with industry partners to be part of the collective action to accelerate efforts against climate change.  As we formulate Sateri Vision 2030 for a sustainable business, carbon reduction will be one of our key focus areas”.

In addition to stepping up greenhouse gas emission reductions in its own operations, the company will continue to support decarbonisation efforts of the downstream textile value chain. Late last year, in collaboration with the China National Textile and Apparel Council (CNTAC), a Climate Leadership Whitepaper was published. The paper analysed how innovation in Sateri’s EcoCosy® fibre products help reduce carbon emission during yarn and fabric manufacturing stages, and also proposed next steps in achieving industry-wide emission reduction goals.   

Sateri attained an ‘A-‘ score in CDP (formerly Carbon Disclosure Project) for Climate Change in 2019;  a score which is higher than the ‘C’ average globally, in Asia, as well as in the Textiles and Fabric Goods sector. 

Monforts denim mills move hemp into the mainstream © Cone Denim
Cone Denim Sweet Leaf jeans.
30.06.2020

Monforts denim mills move hemp into the mainstream

  • There is an urban legend that hemp canvas was used to make the very first pair of Levi’s jeans.
  • While this is a myth that originated in the counterculture of the 1960s, hemp is without doubt the fibre of the moment for the denim industry.

At the second Kingpins24 virtual denim show that was broadcast from New York on June 23rd and 24th, the sustainable benefits of hemp fibre were referenced by many Monforts customers who are now including it in their collections, including AGI Denim, Artistic Milliners, Black Peony, Calik, Cone Denim, Naveena Denim Mills (NDM) and Orta.

“Hemp is an easy to grow fibre which requires no irrigation, no fertilizers, no herbicides and no chemicals,” says Allan Little, Director of Product Development for Cone Denim, which has recently launched its Sweet Leaf collection featuring the fibre. “Significantly, it also uses fifty per cent or even less water than cotton in cultivation.”

It can also bring some new aesthetics to denim too, he adds.

  • There is an urban legend that hemp canvas was used to make the very first pair of Levi’s jeans.
  • While this is a myth that originated in the counterculture of the 1960s, hemp is without doubt the fibre of the moment for the denim industry.

At the second Kingpins24 virtual denim show that was broadcast from New York on June 23rd and 24th, the sustainable benefits of hemp fibre were referenced by many Monforts customers who are now including it in their collections, including AGI Denim, Artistic Milliners, Black Peony, Calik, Cone Denim, Naveena Denim Mills (NDM) and Orta.

“Hemp is an easy to grow fibre which requires no irrigation, no fertilizers, no herbicides and no chemicals,” says Allan Little, Director of Product Development for Cone Denim, which has recently launched its Sweet Leaf collection featuring the fibre. “Significantly, it also uses fifty per cent or even less water than cotton in cultivation.”

It can also bring some new aesthetics to denim too, he adds.

“Hemp has a unique colour and adds a different cast to our indigo, the drape and texture of the fabrics is different and it even adds  a bit of a unique hand, so combined with its sustainable credentials we are proud to be bringing the Sweet Leaf collection to the market.”

US supply chain

Cone is currently sourcing its hemp from France, but with much of its manufacturing now in Mexico – and with the introduction of the US Farm Bill in 2018 which has legalised the growing of legal hemp – is exploring the possibility of investing in the US supply chain.

“With US hemp we’re really at the R&D phase,” Little emphasises. “It’s a unique crop, so coming up with the right stalk to provide the right fibre is challenging. We’ve experimented with different types of seed and various methods of decortication.”

Decortication, he explains, is the mechanical removal of the outside layer of the hemp stalk to useable fibre on the inside. A second process, cottonization, is necessary to make the fibre suitable for spinning, because compared to cotton, hemp is longer, stiffer, and less flexible.

100% success

At the end of 2019, Naveena (NDM), headquartered in Karachi, introduced fabrics featuring up to 51% hemp content in blends with Tencel and recycled polyester and this year has developed the first 100% hemp denims.

“The response to the fabrics we showed last year was incredible and we were looking forward to the response to this latest development – which everyone was asking for – at the Kingpins show in Amsterdam, which unfortunately was unable to go ahead,” says NDM’s Director of Marketing Rashid Iqbal. “We produced initial samples in an undyed state because we were not sure how the wet spun yarn would react in the dyeing, but I’m happy to say we have had success in this respect and are now able to provide one hundred per cent indigo dyed hemp denim.”

Environmental benefits

“Differentiation is the key in the highly-competitive denim industry and we have assisted our customers with trials and optimised processing parameters for a range of different fibres, including hemp, both at our Advanced Technology Centre in Germany and at their own mills around the world,” says Hans Wroblowski, Monforts Head of Denim. “Given the environmental benefits of hemp, and the liberalisation of its cultivation in many parts of the world, the interest in it now comes as no surprise. We have the technologies and know-how to help our customers to fully maximise their hemp denims at all post-weaving stages of production.”

Monforts has a dominant position in the field of denim finishing with its well proven Montex stenters. It has been enjoying further recent success with its Eco Line concept based on two key technology advances – the Eco Applicator and the Thermo Stretch.

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing.

The CYD system also integrates new functions and processes into the weaving preparation processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre.

Oerlikon Barmag systems convince with product diversity (c) Oerlikon
From super-low-shrinkage (SLS) through to high-tenacity (HT): depending on the configuration, Oerlikon Barmag systems are suitable for manufacturing industrial yarns with the most diverse properties.
25.06.2020

Oerlikon Barmag systems convince with product diversity

  • Industrial yarn: Capacity expansion in the high-end sector

Remscheid – the Chinese industrial yarn manufacturer Zhejiang Kingsway High-Tech Fiber Co., Ltd. is expanding its production capacities by a further 40,000 tons per annum with 5 Oerlikon Barmag lines. Kingsway is already successfully manufacturing special high-quality yarns, exclusively deploying Oerlikon Barmag industrial yarn systems.

The 21 new spinning positions will be used to manufacture a broad product range: in addition to super-low-shrinkage (SLS) and high-tenacity (HT) yarn, the business also plans to produce automotive yarns for seat belts and airbags. This flexibility is made possible as a result of the Oerlikon Barmag systems’ configuration. The new systems are expected to commence manufacturing next year.

Industrial yarns for greater safety

  • Industrial yarn: Capacity expansion in the high-end sector

Remscheid – the Chinese industrial yarn manufacturer Zhejiang Kingsway High-Tech Fiber Co., Ltd. is expanding its production capacities by a further 40,000 tons per annum with 5 Oerlikon Barmag lines. Kingsway is already successfully manufacturing special high-quality yarns, exclusively deploying Oerlikon Barmag industrial yarn systems.

The 21 new spinning positions will be used to manufacture a broad product range: in addition to super-low-shrinkage (SLS) and high-tenacity (HT) yarn, the business also plans to produce automotive yarns for seat belts and airbags. This flexibility is made possible as a result of the Oerlikon Barmag systems’ configuration. The new systems are expected to commence manufacturing next year.

Industrial yarns for greater safety

As a quality-conscious industrial yarn producer, Kingsway has been manufacturing its sophisticated, high-end yarns on Oerlikon Barmag filament yarn systems since 2015. Alex Yang Yu Long, CEO of Kingsway, is proud of relying on engineering artistry from Remscheid: “As expected, the yarns are first-class in terms of quality. Our products are used in safety equipment, sometimes in situations where lives depend on them. Therefore, there can be no compromises. To this end, we select our partners with the utmost care."

More information:
Oerlikon yarn industrial yarns
Source:

Oerlikon Manmade Fibers

24.06.2020

VPK Group invests in FlexoCleanerBrush™ from Baldwin Technology

  • New system automatically cleans corrugated printing plates in less than four minutes

Baldwin Technology Company Inc. has announced that corrugated packaging market leader VPK Group has recently installed a FlexoCleanerBrush. This new system—which automatically cleans and dries corrugated printing plates in less than four minutes—has been added to VPK’s advanced 2.1-meter-wide six-color Göpfert Ovation High Board Line flexographic printer at the company’s new high-bay factory in Halden, Norway.

  • New system automatically cleans corrugated printing plates in less than four minutes

Baldwin Technology Company Inc. has announced that corrugated packaging market leader VPK Group has recently installed a FlexoCleanerBrush. This new system—which automatically cleans and dries corrugated printing plates in less than four minutes—has been added to VPK’s advanced 2.1-meter-wide six-color Göpfert Ovation High Board Line flexographic printer at the company’s new high-bay factory in Halden, Norway.

With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of approximately five percent detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife. Cleaning cycles can be controlled through the FlexoCleanerBrush’s operator panel or the integrated Göpfert human-machine interface. Besides offering efficient cleaning during runs and fast end-of-job cleaning, the FlexoCleanerBrush system also enables operators to remove dry plates from the machine without the potential risk of plates sticking together once they are placed back in the plate-racking system. This helps to ensure increased board throughput, less downtime and a safer working environment by eliminating operators’ contact with nip points, moving parts and chemicals.

Source:

Baldwin Technology Company Inc.

Finally: the fast-acting, all-in-one, highly durable antibacterial and antiviral solution for textiles: RUCO®-BAC AGP. (c) RUDOLF GmbH
24.06.2020

Finally: the fast-acting, all-in-one, highly durable antibacterial and antiviral solution for textiles: RUCO®-BAC AGP.

  • RUDOLF GROUP is thrilled to unveil the perfected antiviral features embedded in RUCO®-BAC AGP, the Company’s flagship antimicrobial product for textile applications.

As a consequence of COVID-19 global pandemic the demand for chemical auxiliaries with antimicrobial effect has boomed. RUDOLF GROUP invested important resources in the meticulous assessment of a new antiviral feature which is now added to one of their leading technologies .

Such an effort returned the surprisingly fast and most comprehensive antibacterial and antiviral textile finishing on the market: RUCO®-BAC AGP.

History has led to great vision and innovation

The powerful antimicrobial effectiveness of RUCO®-BAC AGP is rooted in the extraordinary properties of silver, whose antimicrobial magic is lost in the mists of time. Already known by the ancient Romans, Greeks and Egyptians, water and milk were preserved by using silver coins through the early modern age.

  • RUDOLF GROUP is thrilled to unveil the perfected antiviral features embedded in RUCO®-BAC AGP, the Company’s flagship antimicrobial product for textile applications.

As a consequence of COVID-19 global pandemic the demand for chemical auxiliaries with antimicrobial effect has boomed. RUDOLF GROUP invested important resources in the meticulous assessment of a new antiviral feature which is now added to one of their leading technologies .

Such an effort returned the surprisingly fast and most comprehensive antibacterial and antiviral textile finishing on the market: RUCO®-BAC AGP.

History has led to great vision and innovation

The powerful antimicrobial effectiveness of RUCO®-BAC AGP is rooted in the extraordinary properties of silver, whose antimicrobial magic is lost in the mists of time. Already known by the ancient Romans, Greeks and Egyptians, water and milk were preserved by using silver coins through the early modern age.

R&D at RUDOLF GROUP has mounted silver on highly sophisticated, functional and registered microstructures that strengthen and amplify the qualities of this noble metal.

RUDOLF’s proprietary microstructures are the responsible hidden secret and key technical breakthrough behind both efficacy and durability of RUCO®-BAC AGP. This innovation is now the preferred solution to help reducing proliferation and cross-contamination of bacteria and enveloped-virus on textiles.

One gram of microstructures has the astonishing superficial area of about 60 m². The advantage of a much higher surface is that the consumption of resources and dosages can be minimized by the factor 100 and that makes RUCO®-BAC AGP a highly conscious choice.

“Due to the microstructures, a virtually infinite protective shield is created in the textile from which highly effective positive silver ions are set free in small, exactly dosed quantities” says Dr. Dirk Sielemann, R&D Director at Rudolf Group.

Taking performance to the next level

RUCO-BAC AGP effectively protects any textile against bacteria (harmful and odour-causing) and its superior antiviral performance on textiles has been independently demonstrated by applying the most modern testing methods. Assessments were carried out on enveloped Coronaviridae families known to cause a broad spectrum of animal and human diseases.

The microstructures in RUCO®-BAC AGP trigger their powerful antibacterial and antiviral effects based on 3 distinctive inhibiting mechanisms:
1.    Blocking of oxygen-transporting enzymes therefore leading to impaired growth;
2.    Crushing of disulfide bonds and therefore structure of sulphur-containing proteins.
3.    Possible interference with Bacteria and virus surface protein in the membrane.

RUCO®-BAC AGP is intended for the protection of the treated textiles and the microstructures of RUCO®-BAC AGP were studied thinking of performance and safety. It is suitable for next-to-skin applications and cytotoxicity tests show that RUCO®-BAC AGP has no influence on the natural microflora of the skin. Furthermore, because of the adhesion mechanism of its microstructures, RUCO®-BAC AGP is only active in/on the textile and it is non-migrating. 

“This year 202o is being highly emotional and it’s leading to the widespread introduction of antimicrobials on textile and to a myriad of vague, misleading or unsubstantiated marketing claims”, states Dr. Gunther Duschek, Managing Director at RUDOLF GROUP. He concludes “As a highly responsible company, we move cautiously and stand for technologies and practices that are effective, truthful and limit the exposure of apparel manufacturers, retailers and buyers to any risk”.

Source:

EFFE-BI SRL PR & COMMUNICATION

23.06.2020

Mimaki startet Live-Veranstaltungsreihe (Juni, Juli, August)

  • Kommunikation mit Kunden und Förderung neuer Geschäftsmöglichkeiten nach der COVID-19-Krise

Mimaki Europe, ein führender Hersteller von Tintenstrahldruckern und Schneidesystemen, hat die Ausrichtung einer dreiteiligen virtuellen Veranstaltungsreihe – „Mimaki Live Series“ – bekannt gegeben. Mit diesen Veranstaltungen möchte das Unternehmen Kunden unterstützen, die nach Inspirationen und Ratschlägen zur Wiederbelebung ihres Geschäfts nach der COVID-19-Krise suchen.

Aufbauend auf dem Erfolg seines „Virtual Print Festival“ im März und April dieses Jahres hat Mimaki ein Programm für drei marktorientierte virtuelle Veranstaltungen zusammengestellt:

  • Kommunikation mit Kunden und Förderung neuer Geschäftsmöglichkeiten nach der COVID-19-Krise

Mimaki Europe, ein führender Hersteller von Tintenstrahldruckern und Schneidesystemen, hat die Ausrichtung einer dreiteiligen virtuellen Veranstaltungsreihe – „Mimaki Live Series“ – bekannt gegeben. Mit diesen Veranstaltungen möchte das Unternehmen Kunden unterstützen, die nach Inspirationen und Ratschlägen zur Wiederbelebung ihres Geschäfts nach der COVID-19-Krise suchen.

Aufbauend auf dem Erfolg seines „Virtual Print Festival“ im März und April dieses Jahres hat Mimaki ein Programm für drei marktorientierte virtuelle Veranstaltungen zusammengestellt:

  • 1. Veranstaltung: Werbetechnik (Sign Graphics) – 30. Juni 2020
  • 2. Veranstaltung: Textildruck (Textiles) – 14. Juli 2020
  • 3. Veranstaltung: Industriedruck (Industrial Printing) – 27. August 2020

Jede Veranstaltung wird Vertretern von Mimaki, Kunden und Anbietern eine Plattform für Gespräche über die Auswirkungen der COVID-19-Krise auf das Geschäft ihres Unternehmens und der Branche insgesamt sowie für den Austausch von Erfahrungen, Herausforderungen und Erfolgsgeschichten geben. Die Veranstaltungen finden auf Englisch statt.

Auf dem Programm der Mimaki Live-Veranstaltungen stehen Podiumsdiskussionen, Meinungsbefragungen, Live-Chats sowie Frage-und-Antwort-Runden, die zu intensiven Gesprächen über aktuelle Themen anregen und den Austausch von Informationen und Ratschlägen innerhalb der Print-Community fördern sollen.

„Diese noch nie dagewesene Zeit hat die Art unserer Geschäftstätigkeit verändert, möglicherweise sogar auf lange Sicht“, erklärt Danna Drion, Senior Marketing Manager bei Mimaki Europe. „Als Industrie müssen wir jetzt unbedingt neue Wege zur Kommunikation und Netzwerkpflege finden. Dafür bieten virtuelle Veranstaltungen, wie die Mimaki Live Series, eine gute Gelegenheit. Wir freuen uns auf den intensiven Dialog mit unseren Kunden und Partnern und auf anregende, wichtige Gespräche über die Zukunft unserer Industrie.“

Auf www.mimakieurope.com/mimaki-live-event kann man sich für die Mimaki Live-Veranstaltungsreihe anmelden.

More information:
Mimaki
Source:

Mimaki

18.06.2020

Archroma announces a new collaboration with Esprit

  • Esprit selects EarthColors® by Archroma for its newest ‘I AM SUSTAINABLE’ capsule collection

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced a new collaboration with Esprit, the global fashion clothing brand, who selected the EarthColors® range for its ‘I AM SUSTAINABLE’ capsule collection.

Esprit creates laid-back, high-quality essentials that reflect its core values of sustainability, equality and freedom of choice. The brand developed its first eco-conscious collection made of 100% organic cotton, back in the early 90’s.

Archroma’s EarthColors® range came to public attention for being the Gold Winner of the OutDoor Industry Award 2017, Sustainable Innovations category.

The range is regularly featured by brands such as Kathmandu, G-Star and Ternua, who are willing to explore truly innovative and authentic color options for more eco-conscious casual wear collections.
Archroma’s EarthColors® is a line of patented plant-based dyes, sourced from up to 100 percent renewable resources.

  • Esprit selects EarthColors® by Archroma for its newest ‘I AM SUSTAINABLE’ capsule collection

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced a new collaboration with Esprit, the global fashion clothing brand, who selected the EarthColors® range for its ‘I AM SUSTAINABLE’ capsule collection.

Esprit creates laid-back, high-quality essentials that reflect its core values of sustainability, equality and freedom of choice. The brand developed its first eco-conscious collection made of 100% organic cotton, back in the early 90’s.

Archroma’s EarthColors® range came to public attention for being the Gold Winner of the OutDoor Industry Award 2017, Sustainable Innovations category.

The range is regularly featured by brands such as Kathmandu, G-Star and Ternua, who are willing to explore truly innovative and authentic color options for more eco-conscious casual wear collections.
Archroma’s EarthColors® is a line of patented plant-based dyes, sourced from up to 100 percent renewable resources.

Archroma developed EarthColors® using non-edible waste products, from agriculture and herbal industries, to replace petroleum derived raw materials; which are the conventional raw materials used to synthesize dyes currently. This gives brands an alternative when looking for more natural ways of dyeing garments.
The collection is available online: www.esprit.eu/earthcolors.

Source:

Archroma