From the Sector

• Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

Amongst them are TMAS members of the ACG Group, who quickly established a dedicated new nonwovens fabric converting and single-use garment making-up plant to supply to the Swedish health authorities. From a standing start in March, this is now producing 1.8 million square metres of converted fabric and turning it into 692,000 finished medical garments each month.

“In 2020 so far, we have seen new value chains being created and a certain amount of permanent reshoring is now inevitable,” says Premler-Andersson. “This is being backed by the new funding announced in the European Union’s Next Generation EU plan, with €750 billion marked for helping industry recover. As the European Commission President Ursula von der Leyen has stressed, “green and digital” transitions hold the key to Europe’s future prosperity and resilience, and TMAS members have new solutions to assist in both areas.”

Remote working

Automated solutions have opened up many possibilities for remote working during the pandemic. Texo AB, for example, the specialist in wide-width weaving looms for the paper industry, was able to successfully complete the build and delivery of a major multi-container order between April and May.

“Our new Remote Guidance software now makes it possible for us to carry out some of the commissioning and troubleshooting of such new lines remotely, which has been helpful” says Texo AB President Anders Svensson.

Svegea of Sweden, which has spent the past few months developing its new CR-210 fabric relaxation machine for knitted fabrics, has also successfully set up and installed a number of machines remotely, which the company has never attempted before.

“The pandemic has definitely led to some inventive solutions for us and with international travel currently not possible, we are finding better methods of digital communication and collaboration all the time,” says Svegea managing director Hakan Steene.

Eric Norling, Vice President of the Precision Application business of Baldwin Technology, believes the pandemic may have a more permanent impact on global travel.

“We have now proven that e-meetings and virtual collaboration tools are effective,” he says. “Baldwin implemented a home office work regime from April with only production personnel and R&D researchers at the workplace. These past few months have shown that we can be just as effective and do not need to travel for physical meetings to the same extent that was previously thought to be necessary.”

Pär Hedman, Sales and Marketing Manager for IRO AB, however, believes such advances can only go so far at the moment.

“Video conferences have taken a big leap forward, especially in development projects, and this method of communication is here to stay, but it will never completely replace personal meetings,” he says. “And textile fabrics need to be touched, examined and accepted by the senses, which is impossible to do via digital media today. The coming haptic internet, however, may well even change that too.”

Social distancing

The many garment factories now equipped with Eton Systems UPS work stations – designed to save considerable costs through automation – have meanwhile benefited from the unintentional social distancing they automatically provide compared to factories with conventional banks of sewing machines.

“These companies have been able to continue operating throughout the pandemic due to the spaced nature of our automated plant configurations,” says Eton Systems Business Development Manager Roger Ryrlén. “The UPS system has been established for some time, but planned spacing has proved an accidental plus for our customers – with improved productivity.”

“Innovations from TMAS member companies have been coming thick and fast recently due to their advanced know-how in automation concepts,” Premler-Andersson concludes.  “If anything, the restrictions imposed by the Covid-19 pandemic have only accelerated these initiatives by obliging our members to take new approaches.”

• Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
• With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

• ISKO and Bluesign announce their partnership for the creation of a cleaner, safer, and transparent world of denim. ISKO just released its landmark
• Sustainability Report, setting the target of achieving bluesign® APPROVED accreditation by the end of 2020.

Denim is a timeless staple in wardrobes around the world. ISKO, the leading denim ingredient brand, and Bluesign, the architects of a sustainable and responsible textile supply chain, are joining forces in a partnership. Alliances like this are the source of effective improvements.

ISKO has a long-standing commitment to ensure the integrity of its ingredients and the traceability of the fibers and materials used in its denim apparel. By releasing the Sustainability Report, ISKO again demonstrates its commitment to creating and designing denim apparel that has a positive connection with the planet. In this report, a primary target of ISKO is to achieve bluesign® APPROVED accreditation for its denim textiles, attaining the strictest industry standard for consumers and environment alike.

With the goal of completing this process by the end of 2020, the company has already performed bluesign® COMPANY ASSESSMENT at an above-average level. This shows how ISKO anticipates changes rather than simply reacting to legal or stakeholder requirements, pursuing an approach that has a huge potential and includes several actions for further improvements. Through this partnership, ISKO and Bluesign continue the movement of the textile and fashion industry into a future that pays more attention to people and the environment, because only when both are considered can the industry truly make a positive long-lasting impact.

“ISKO, as the soul of jeans, has a vision for denim that is creative in design and innovative in the use of technologies. These distinct qualities in combination with a determined commitment to a sustainable supply chain makes ISKO a true leader in the textile industry. We look forward to the next impactful steps we will take together.” Jill Dumain, CEO, bluesign technologies. “As the leader of this industry, we feel it is our responsibility to be and act as a force for good. We have always prioritized transparency and accountability, highly valuing every improvement that can be achieved by sharing values and goals through partnerships. This one makes us particularly proud, as it raises the bar of our efforts and challenges us to maintain our improvement efforts.” Ebru Ozkucuk Guler, Senior Sustainability & CSR Executive.

• HeiQ Viroblock by CHT provides effective antiviral treatment on different fabrics
• No infective viruses left after 30 minutes
• For a wide range of protective textile applications

CHT is cooperating with HeiQ by implementing the HeiQ Viroblock by CHT in the textile industry, globally. HeiQ Viroblock by CHT is among the first textile technologies in the world to be proven effective against SARS-CoV-2 in the laboratory.

HeiQ Viroblock by CHT is a textile treatment for industrial use, designed to provide textiles with antiviral and antibacterial properties. The combination of silver antimicrobial technology and vesicle technology rapidly destroy enveloped viruses including coronaviruses. It has previously been tested against coronavirus 229E, another strain of virus in the Coronavirus family.

The latest testing with SARS-CoV-2 virus was conducted by researchers at the Doherty Institute, a joint venture between the University of Melbourne and The Royal Melbourne Hospital, an internationally renowned institution combining research, teaching, public health and reference laboratory services, diagnostic services and clinical care into infectious diseases and immunity. The research project involved a disinfection test protocol that simulated the real-life interaction of small aerosol droplets contaminating clothing. A known concentration of SARS-CoV-2 virus was contacted with the sample fabric for 30 minutes followed by measurement of remaining infectious SARS-CoV-2 viruses. The fabric sample treated with HeiQ Viroblock by CHT had no infective viruses left after 30 minutes. The result indicated a SARS-CoV-2 virus reduction of 99.99% relative to the inoculum control.

Masks yes, but with comfort, safety and also style: Cifra, Iluna Group, Rosti and Sitip launch masks with a fashion touch with the premium stretch fiber ROICA™
 
Big companies are updating their productions with high-performance and high technical characteristics masks, result of their historical experience and thanks to an exceptional partner in common: the premium stretch fiber ROICA™ by Asahi Kasei. And the solidarity race continues to donate them to hospitals and to the Red Cross
 
Forced to keep most of the face covered and often for a long time during the day, solutions that are above all performing and comfortable become increasingly necessary.

And solutions that are also a manifestation of our personality, which remains hidden and entrusted to the mere expression of the eyes. Walking on the streets we sometimes even don’t even recognize each other, since we are so hidden; and the desire to minimize the situation often takes over, together with that desire to make us recognizable, to possess and express an identity anyway. For fans of escaping homologation (now more than ever mandatory and for this reason even more difficult) “rescue comes” - and this is the case to say it - from illuminated companies who have thought about creative solutions for those with masks has to do all day, at home, at work, during sports and in leisure time. To feel more comfortable, there are many proposals: more “street style” for sports addicted and young people - inside and outside -, more elegant and sophisticated for women.

Textiles companies have joined the fight against Covid-19 engaging a strong and decisive personal and productive battle, which has seen many of them transform and convert their production units for the production of masks and gowns intended for medical personnel and the community.

Some of the most established excellences of the textile sector as Cifra, Iluna Group, Rosti and Sitip have made use of the precious collaboration of ROICA™, the premium stretch fiber by Asahi Kasei. ROICA™ is the innovative and smart premium ingredient chosen by these companies to guarantee even more comfort, thanks to an exceptional top-level component that gives elasticity for perfect adherence to the skin. Each of the companies then declined its production according to its specificity. And this is their important contribution.

Cifra presents the eco-sustainable version of the mask, the ECO-MASK™, which combines the high performance of Cifra knitting technology with the sustainability of the materials used. The 100% regenerated yarns create a 100% sustainable mask with 83% ECONYL and 17% ROICA™ V550 elastomer, the stretch fiber certified Cradle to Cradle Gold Health Level which allows excellent and lasting printability, as well as advantages regarding the circular economy as it does not release harmful substances into the test environment according to the Hohenstein Environmental Compatibility certification.

Iluna Group, European leader in the production of lace, has recently donated 400 protective “smart”  made with ROICA™ EF, the world first GRS - Global Recycled Standard – certified elastomer and which uses 58% of pre-consumer recycled content, mixed with Q-NOVA® by Fulgar. Multi-use, washable, bacteriostatic, breathable and water-repellent prevention masks gave to San Gerardo Hospital in Monza to answer to the Call to action launched on March 19th by the green journalist Diana De Marsanich, with the responsible and innovative materials expert Giusy Bettoni of C.L.A.S.S. Eco Hub, the fashion designer Marina Spadafora of Fashion Revolution Italia and the entrepreneur Simona Roveda of LifeGate. Iluna Group also announces the launch of the website dedicated to the direct sale of the different kind of masks all made with three layers, antibacterial and anti-drip treatment and washable up to 10 times. Iluna Group has also created the “smart” masks made with ROICA™ EF, the world first GRS - Global Recycled Standard – certified elastomer and which uses 58% of pre-consumer recycled content, mixed with Q-NOVA® by Fulgar.

In addition to the “smart” masks, available for women, men and children, Iluna Group has created two special versions of Lace Masks, covered with refined lace. One embroidered on a cotton base and one with soft microfiber.

Rosti, historic knitwear factory based in Brembate specialized in the design and production of cycling clothing with the best technical fabrics and the most advanced technologies, has put its experience at the service of the production of protective masks washable up to 20 times, made with Sitip fabric and with the anti-drop treatment Ecoacquazero®. Fascinating and protective like a second skin, the masks are sold in a pack of 10 pieces with captivating, colorful, geometric and original graphics, designed for every personality.

Rosti masks contain the premium stretch fiber ROICA™ Resistance, a family of premium stretch yarn with particular performances of resistance and durability.

The two brands have been working together to develop unique concepts for FW2019 and SS2020 collection, starting from premium ISKO™ denim.

Each garment is sartorially and carefully thought out to result in a beautiful product that is respectful of people and the planet.Excellence is in the detail and DW knows it well. The Italian brand always focused on quality standards and craftmanship to develope its collections.
From fabrics to stitching to accessories, every small element is carefully envisioned and developed to create garments are safe for the planet and its people. With cutting-edge technologies and forefront treatments being part of the process, the partnership with ISKO, one of the leading denim ingredient brands, came naturally – the next step forward in a journey toward distinction.

Being the first mill in the world to be awarded both Nordic Swan Ecolabel and EU Ecolabel, the company provided responsible solutions to better define DW’s vision. Combined with the brand’s tradition and expertise, the fabrics developed by ISKO the denim pieces are unite responsibility and quality, according to the mill’s Responsible Innovation™ approach.
The result is the five pockets Milano model and the American pocket Enea pant, both available in different washes and colors.

Modernized press eases digital printing conversion, signals new era for PCMC and RDP Marathon

Paper Converting Machine Company (PCMC)—part of the Barry-Wehmiller Converting Solutions Platform announced the recent installation of the new Signature Series (380V-s) wide-web, high-speed offset  press at J.J. Collins Printers in Charleston, Illinois.
The 380V-s is the first in the series that is replacing the 380V press series, long highly regarded by printers in the longrun documents and high-end promotional graphics markets. The new design incorporates the latest in internet connectivity and touchscreen technology, and allows for easy integration with full or hybrid digital printing.
Designed by RDP Marathon, a recent acquisition of PCMC, the 380V-s represents PCMC’s expansion into providing equipment and services to the offset printing industry. Backed by PCMC’s global sales, manufacturing and service support, RDP Marathon will continue to maintain a sharp  focus on innovation. J.J. Collins Printers—already using an RDP Marathon model 260P blanket-to-blanket, heat-set press for its high-end commercial products—has been providing innovative print solutions  since 1878. Its commitment to using state-of-theart pre-press, press and bindery equipment has ensured the company's position as a leader in the print manufacturing industry.
In addition to the 380V-s, PCMC continues to develop new technologies and applications for a variety of print markets.

• Launched by SCOTT Sports Racing Team with Sitip, Rosti and ROICA™ by Asahi Kasei

The collection was designed starting from the needs of the athletes with the aim to offer them the best solution in terms of style and ergonomics, high performance, easy maintenance and perfect fit being also sustainable.

Ispo 2020 saw the celebration of the partnership started last year between Scott Racing Team, Rosti, Sitip and ROICA™ by Asahi Kasei for the supply of the team riders’ uniforms. Rosti worked on style and packaging, Sitip on technical fabrics ‘BE-HOT - Heat Generating fabrics’, while ROICA™ provided its premium stretch ingredient. The collaboration carries an interesting news: uniforms are not just highly performing but also, and above all, sustainable.

Sitip created the Native fabric entirely made with recycled yarns and featuring the premium high performing  ROICA™ EF elastomer. The yarn is certified GRS - Global Recycled Standard certification (and also provides special dyeability) with Rosti’s design and high care garment manufacturing.

The main rider of Scott Racing Team Italy, the young and award-winning champion Juri Ragnoli, the “end user” of the uniforms, explaines the requirements that garments should possess in order to meet the sporting challenges that await athletes: breathability, comfort on the skin, performance, durability of the shape and maintenance of the characteristics throughout the course of use of the garment. When asked about the arrival of a new sustainable uniform, the champion said that “it’s right and important to take this direction, which perfectly meets the team’s values, as love for nature and respect for the environment. It will be nice to wear something that follows exactly what you believe in”.

Energiapura – Production of reusable, customised protective masks that are also fashion accessories

• The Italian company, a specialist manufacturer of functional sportswear, conducted research and began producing masks in response to the COVID-19 crisis
• Using Mimaki sublimation printers, the masks can be customised, getting away from their connotation with hospitals and transforming them into a fashion accessory

From functional sportswear to combatting the spread of the Coronavirus: Energiapura, an Italian company has developed a mask that meets the Class I medical device requirements. The EP PA 2020 (Energiapura Pure Air) facial device, optimised for air filtering and breathability, provides protection while working, and can be reused. But Energiapura has gone even further, branding and customising the masks with sublimation printing.
The EP PA 2020 mask, compliant with 93/42 EEC Medical Devices – Class I washable, meets the essential requirements of UNI EN 14683:2019. Having redirected the manufacturing process, Energiapura is now stepping up production levels to meet the rising demand from hospitals, pharmacies, chemists, companies and consumers.

Pure Air, Energiapura’s mask
The EP PA 2020 is based on a functional concept: protection, breathability and reusability are the main principles. EP PA 2020 is made up of three layers of fabric: the first, the outer layer, is DWR-treated polyester, the second is TNT polyester, providing a filtering function, and the third, which comes into contact with the face, is polyester containing special fibres, such as coolmax and carbon.  Therefore it can be reused via normal washing and steam ironing, which also sterilises it.
The CEO of Enegiapura, Alberto Olivietto explains the idea of the customisation of the mask: “We wanted to disassociate our masks from the hospital image. By decorating them with company branding and designs provided by customers.” This is where the Mimaki JV300 wide-format printer comes in.

The Perlon®-Group is supporting the procurement measures of the volunteer fire service in the Darmstadt-Dieburg district by donating 2400 KN 95 protective masks. This protective equipment will be put to good use by the force covering 23 towns and communities in the area.

The masks offer protection for fire brigade personnel and ensure that the firemen and women can carry out their duties safely and that they also protect the inhabitants in the district and everybody else in the area who may be involved in a rescue, from a potential contamination of the Corona virus.