From the Sector

Under vacuum, the new BB Engineering large-area filter produces a homogeneous, pure melt with a targeted IV setting for instance, for returning polyester production waste to the melt flow, but also for achieving a homogeneous viscosity in the case of virgin material.

BB Engineering has expanded its melt filter portfolio to include a patented large-area vacuum filter designed especially for processing polyester waste. The so-called Visco+ filter is already known as the key component of the BB Engineering VacuFil recycling system. Now, it is also available as a separate and easily-integratable upgrade component for existing systems. Within this context, the uses of the Visco+ are by no means limited to just decontamination. Here, the Visco+ offers the following solutions:

• IV homogenization: if an existing production system is struggling with IV fluctuations, the Visco+ is able to actively intervene and balance out any irregularities;
• IV increase: if the final viscosity is insufficient when processing recycled materials, the Visco+ can increase the IV without the negative impact of long residence times.

In this way, the Visco+ enables fast and flexibly-controllable viscosity build-up and reliable viscosity monitoring of the polyester melt using a to-date unique, patented process. Depending on the intended end use, the melt can be ad-justed to the further processing procedure in a targeted manner. The requi-site melt properties above all the intrinsic viscosity, but also the purity and homogeneity are achieved in a reliable and reproducible manner and can also be adjusted during ongoing operation.

As a melt filter, the Visco+ operates like a liquid-state polycondensation unit. A maintenance-intensive reactor or a deposit-prone stirring unit are not required. Moisture is removed from the PET in the filter, which – in conjunction with an adjustable residence time – results in the desired IV increase in the vacuum. This enables a controlled IV build-up of up to 30%. The intrinsic vis-cosity is the central quality figure in PET recycling and rPET processing. It determines the melt performance in the downstream production process and the properties of the end products. The intrinsic viscosity is continually moni-tored by means of an integrated viscosity measurement unit and reliably adjusted in the event of deviations (caused by disparate input qualities, for ex-ample). At the same time, the filter provides an enormous material surface compared to the volume and continuously renews this. To this end, contamination can be removed particularly effectively from the starting material by means of automatically-regulated high-performance vacuum (1-30 mbar).

The Visco+ is particularly suitable for recycling PET waste that is to be reused for high-end products.

Oerlikon signs agreement to acquire INglass, a global leader in high precision polymer flow control equipment, to accelerate expansion strategy in polymer processing market

• INglass and its HRSflow Division is a market leader spezialized in hot runner sytems
• Technology is highly complementary to Oerlikon’s existing capabilities in polymer flow control and will expand Oerlikon’s market access
• Acquisition accelerates Oerlikon’s strategy in diversifying its manmade fibers business to expand into the high-growth polymer processing solution market
• Oerlikon renames ‘Manmade Fibers’ Division to ‘Polymer Processing Solutions’
• Acquisition is expected to be completed in the second quarter of 2021

Oerlikon, a leading provider of surface engineering, polymer processing and additive manufacturing, announced today that it has signed an agreement to acquire Italy-headquartered INglass S.p.A. and its innovative hot runner systems technology operating under its market-leading HRSflow business.

The strategic acquisition is a significant step in expanding Oerlikon’s current manmade fibers business into the larger polymer processing market. The acquisition accelerates and enhances existing organic initiatives to diversify and strengthen the company’s core high-precision polymer flow control capabilities, products and services. The completion of the transaction is subject to customary regulatory approvals and is expected by the second quarter of 2021.

To reflect Oerlikon’s expansion into a larger high-growth market, the Manmade Fibers Division will be renamed as Polymer Processing Solutions Division. This division will have two business units: Flow Control Solutions and Manmade Fibers Solutions. The busines unit Flow Control Solutions will combine the expertise of Oerlikon Barmag’s existing gear metering pumps business line and INglass’ HRSflow operations. The business unit Manmade Fibers Solutions will continue to focus on growing the existing chemical fiber machinery and plant engineering business, offering plant solutions for the production of polyester, polypropylene and polyamide.

“Our new Polymer Processing Solutions Division and the acquisition of INglass S.p.A. and its HRSflow business are critical components of Oerlikon Group’s growth strategy. We are accelerating our efforts to drive sustainable organic and inorganic growth in all of our businesses. The acquisition enables new synergy opportunities between both Oerlikon divisions in specific end markets such as automotive. With INglass and its HRSflow operations, we acquire leading suppliers in their markets with proven success of their technologies and services,” said Dr. Roland Fischer, CEO Oerlikon Group.

“We firmly believe that within the Oerlikon Group we can further exploit the potential of our hot runner systems technology and, when combined with the capabilities of Oerlikon Barmag gear metering pumps and their melt distribution engineering competence, will position our business as one of the leading precision flow control specialists for multiple applications in a global growth market”, said Antonio Bortuzzo, CEO of INglass S.p.A.

New business unit offers great growth potential

The Oerlikon Barmag competence brand already offers high precision flow control related components, including a large selection of gear metering pumps for textile and non-textile markets. These highly efficient pumps are used in silicone casting, dynamic mixing and oil spraying for the chemical, paint, polymer processing and automotive industries. This double-digit million CHF business, which has grown in recent years, will be merged with INglass’ HRSflow hot runner technologies under the new business unit Flow Control Solutions. HRSflow’s excellent market access to many OEMs in and outside the automotive industry brings significant growth opportunities.

INglass is a leader in automotive and expanding in other sectors

INglass S.p.A. is an internationally operating successful company established in 1987. Its product portfolio includes hot runners as well as engineering and consultancy services for the advanced development of polymer processing products. INglass’ HRSflow hot runner systems are applied in multiple industries from automotive, consumer goods and household appliances to packaging, waste management, construction and transportation.

INglass is headquartered in San Polo di Piave, Italy, near Venice. 2020 revenues of INglass were approximately CHF 135 million and the acquisition is expected to be immediately accretive to Oerlikon’s margins and cash flows. INglass has more than 1 000 employees and 55 sites worldwide, including production plants in Italy, China and the US. Among these sites are INglass’ newly renovated headquarters and production at its primary location in San Polo di Piave near Venice, Italy. The investment modernized the facilities with automated production, underlining the company’s commitment to sustainability and the environment. The other two modern production sites are in Zhejiang (Hangzhou Province) in China and Michigan (Grand Rapids) in the USA.

Following the integration with Oerlikon Barmag’s gear metering pumps business of about 200 employees in Remscheid, Germany, the new Flow Control Solutions business unit will have round about 1 200 employees.

"We see great potential for growth in our new Flow Control Solutions business unit,” said Georg Stausberg, Polymer Processing Solutions Division CEO and Member of the Executive Committee of the Oerlikon Group. “The businesses form the two core growth pillars and benefit from each other in global market development, in modern and digitized production, and in customer services. We also see potential synergies in R&D by combining existing know-how in the field of polymer processing. New technological solutions between hot runner systems and gear metering pumps are conceivable. We also anticipate collaborating more closely with the Oerlikon Surface Solutions Division, particularly in future mobility applications and functional polymer component solutions for the automotive industry. All in all, we will offer our customers innovative and attractive solutions in the field of polymer processing and high precision flow control components.”

Next steps for further diversification of the division product portfolio are already ongoing

Combining the divisions plant engineering and process know how with expertise on high precision flow control components technologies has a significant impact on product quality in nearly all applications, which opens up a platform for further organic and inorganic growth. "We are closely observing the megatrends in the markets and developing new business models to match. In the area of sustainability, covering topics such as circular economy, the recycling of materials using mechanical and chemical recycling solutions, as well as the handling of new, more environmentally friendly and biodegradable materials, we are on the verge of a breakthrough. We are ready to actively participate in these growth areas,” added Georg Stausberg.

“In realigning the Polymer Processing Solutions Division, Oerlikon will continue to apply our successful recipe of a lean organizational structure to efficiently manage the business. This means clear processes, short decision-making paths and competent teams in a diverse and multicultural organization in which everyone can contribute innovatively to create customer value,” said Georg Stausberg.

From leaders to entrepreneurs, JEC COMPOSITES CONNECT is welcoming a lineup of special guests. As part of conferences, they will share their expertise, vision, and perspective in front of all the players in the composites industry.

AEROSPACE – Towards a More Sustainable Strategy, Tuesday, June 1st –  9am to 10:15am (CEST)
The aerospace industry is a major source of innovation and technological advancements that often originates inspiration across a wide variety of other industries. Nowadays, in a context where environmental constraints are becoming increasingly stringent especially when it comes to air mobility, OEMs are constantly in search of innovative answers and solutions that will allow them to create a ‘greener’ future. The need for light-weighting, reduced maintenance and waste, and repurposing aerospace-grade CFRP towards other applications are expected to drive demand and adoption of composites in aerospace applications.

Yannick Willemin, Head of Marketing & Business Development, 9TLabs, will chair this conference with Clémentine Gallet, CEO, Coriolis, Hervé Gilibert,CTO, ArianeGroup, Jean Botti, CEO, Voltaero and Scott Finn, Chief Consulting Engineer for Composites, GE Aviation.

AUTOMOTIVE – The Right Material at the Right Place, Tuesday, June 1st –  3 pm to 5:05 pm (CEST)
Among the many challenges facing the automotive industry, reducing vehicle mass and therefore emissions all while maintaining safety and cost-efficiency remain key. Lighter materials implying higher costs, they limit mass production. Therefore, a combination of materials, albeit hybrid solutions, would help solve this issue and are becoming increasingly attractive for manufacturers. This conference consists of industry presentations and a panel discussion involving major OEMs & Tier1s from all over the world. It covers the challenges & opportunities of using composites materials in the Automotive field.

Dale Brosius CFO, IACMI, will chair this conference with Alice Swallow, Senior Innovation Engineer, FORD MOTOR GROUP, Christophe Kühn, Senior Project Manager – Composites & Hybrid Components, VOLKSWAGEN, Dominik Klaiber, Doctoral Candidate Body Advanced Engineering, PORSCHE and Gerard LIRAUT, Expert Leader Polymers, GROUPE RENAULT – ALLIANCE RENAULT NISSAN MITSUBISHI.

International technology Group ANDRITZ has received an order from Amarande SAS to supply an elliptical cylinder pre-needler for their plant in Lussac les Châteaux, France. This machine will process shoddy and natural fibers for the production of heavy felts. Installation and start-up of the machine are scheduled for the second quarter of 2021. The new needlepunch production line with the high-performance ANDRITZ cylinder pre-needler will allow Amarande to offer high-quality products and thus open up new market opportunities.

ANDRITZ offers a complete range of elliptical cylinder pre-needlers serving different weights, widths, speeds and punching capacity. Over the years they have become a must for production of heavy products, special applications and also for demanding applications like automotive. They are a key success factor in enabling the subsequent needling machines to process heavy batts smoothly and control the progressive draft through the consolidation process.  

Established in 1990, Amarande is an important French producer of nonwovens, specialized in the production of felt and wadding from recycled textile and natural fibers (wool, cotton, hemp, flax, jute, etc.). The company operates in various markets such as furniture, green spaces, horticultural crops, and insulation.

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office. Stefaan Haspeslagh was newly elected to the Board of Directors for a one-year term of office.

Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2020, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

Outlook Updated
As already communicated at the Results Press Conference on March 9, 2021, Rieter expects the market recovery to continue in 2021. The company expects an order intake exceeding CHF 500 million in the first half of 2021. For the first half of 2021, Rieter still anticipates that sales will be below break-even point. For the full year 2021, Rieter expects an operating profit.

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

Fully on track strategically
The Managing Board of Lenzing AG presented the business development of the year 2020, a strategic outlook and sustainability strategy including the relevant roadmap to achieve climate targets to the participating shareholders. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions per ton of product by 50 percent by the year 2030. The goal is to operate in a climate-neutral manner by 2050.

The substantial investments made in Thailand and Brazil not only support Lenzing in its transformation to a supplier of environmentally compatible specialty fibers but also comprise an important milestone on this journey which sustainably increases the company’s enterprise value.

The implementation of these two key projects is proceeding ahead as planned in spite of the direct impacts of the coronavirus crisis. The pulp plant in Brazil is scheduled to be put into operation in the first half of 2022 and will significantly increase Lenzing’s own in-house supply of dissolving pulp. Production in Thailand is expected to commence towards the end of 2021, further raising the share of eco-friendly specialty fibers in the Lenzing product portfolio.

New appointments to the Supervisory Board
Dr. Veit Sorger retired from the Supervisory Board of Lenzing AG on his request effective at the end of the Annual General Meeting. Veit Sorger had been a Member of the Supervisory Board since 2004 (also serving as Deputy Chairman since 2011) and served on various Supervisory Board committees.

The Annual General Meeting elected Dr. Markus Fürst, Managing Director of B&C Industrieholding GmbH, and Thomas Cord Prinzhorn, MBA, CEO of Prinzhorn Holding GmbH, to serve on the Supervisory Board until the end of the Annual General Meeting resolving upon the discharge of the Supervisory Board members for the business year 2024.

After a turbulent year, it seems strange to be thinking about ‘after the pandemic’, but with millions of vaccinations underway, the light at the end of the tunnel is visible. As we turn the corner, choosing technology partners that understand how to proactively respond to changing market needs and support the evolving requirements of print businesses and end customers will be vital. The printers in Mimaki’s ‘100 series’ portfolio, which consists of the high quality, high productivity entry level roll-to-roll inkjet printers the UJV100-160 UV and the JV100-160 solvent, and the high performance textile printer, the TS100-1600, are a perfect reflection of the way technology requirements are adapting in line with the industry as we look to the future. To demonstrate this, we have identified three post-pandemic technology touchpoints that will help print businesses target success amid uncertainty.

• Productivity

The pandemic has served as a major catalyst for existing trends, and our growing appetite for everything on-demand has been given a huge COVID-related boost. For printers, a digital solution that offers premium productivity, quality and efficiency at an entry-level price point is sure to be an invaluable investment to meet evolving ‘on-demand demands’. Adding a digital production element to your business doesn’t need to be daunting, complicated or overpriced – the Mimaki ‘100 series’ truly lives up to the tagline ‘Expert Printing Made Easy’, offering an incredibly intuitive user experience for streamlined, ultra-efficient printing, high-quality output, and cost-effective implementation. The powerful and productive new textile printer in the ‘100 series’, the TS100-1600, is a shining example of equipment developed with the future of the market in mind – the textile industry is fast-paced and constantly innovating, and the printer you invest in needs to keep up with your creativity.

• Diversity

2021 is set to be a period of transition. While that will mean navigating uncertainty, the ‘glass half full’ approach is to view the year ahead in terms of opportunities such as expanding your business, exploring alternative revenue streams, and taking the plunge into new markets. In the past, it may have felt as if the barriers to entry when it came to looking beyond your core business were too great. However, in a post-pandemic world, we need to break some of those barriers down and demonstrate that success with digital print is within reach if you invest in the right equipment. With the ‘100 series’ portfolio, Mimaki is acknowledging what print service providers need from their technology partners – the UJV100-160 and the JV100-160 are suitable for a wide range of applications that will allow you to easily and affordably diversify your offering, and with the TS100-1600 textile printer, it has never been easier to target growth in the thriving textile sector, even in challenging times.

• Affordability

Affordability is one of the most significant barriers to entry into new markets. 2020 was a year of unprecedented economic challenges, so it’s more important than ever to be thinking about gaining a competitive edge, and the printers in the ‘100 series’ from Mimaki have been specifically formulated to help you ramp up productivity while keeping running costs low. Whether you want to take your first foray into digital print production, expand the services you offer or simply grow your customer base, cost can be a major sticking point, which is why supporting customers is Mimaki’s number one priority, designing the ‘100 series’ around your needs and continuing to listen to how those needs are developing. Making an investment in the JV100-160 in order to move into outdoor graphics; meeting demand for faster turnaround times by adding the instantly curable UJV100-160 to your production setup; or taking a leap into new revenue streams with the TS100-160 – it’s all ‘100’ percent accessible.

Devan, one of the leading companies in sustainable and functional textile finishes, has been working together with Jeanologia, a global leader in sustainable and efficient finishing technologies for textiles, to reduce further water consumption during the application of Devan’s awarded BI-OME® antimicrobial and R-Vital® skincare range.

With increased attention to climate change and limiting excess water consumption in textile production (whether denim or other textiles), Devan and Jeanologia worked together to evaluate the application of Devan finishes onto garments via the patented e-Flow technology.

e-Flow technology can accomplish a considerable number of finishing effects with the highest quality, a minimal amount of water and zero discharge. The technology uses micronization and nebulization to substitute traditional abrasion process and deliver performance chemistry using nano-bubbles instead of water. It reduces the cost of application, saves the amount of water used and ensures that the correct amount of chemistry stays in the garment and not in the water. e-Flow is the perfect fit for every industrial washing machine. This allows mills and brands to apply Devan’s technologies in a more sustainable way than using traditional application equipment, even for smaller production runs and direct onto garments.

“With the global textile production using 4% of the global freshwater withdrawal, here at Devan we are continuously working on more sustainable solutions”, says Dr. Vanessa Daelman, CTO at Devan. “Next to this, we of course highly value sustainable application methods from Jeanologia, like e-Flow, in order to reduce the excess water usage during textile application. We are delighted that we could work together with Jeanologia and establish that Devan technologies can be easily applied via these technologies onto garments or fabrics like denim and with full retention of functionality. This application method also allows post garment treatment of our finishes, for example an antimicrobial treatment onto already finished garments, which will be increasingly important in a more circular textile world where re-use plays an important role”, Dr. Daelman concludes.

The machines are quick and reliable, with very little downtime, which is massively important to me as a business owner.”

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced United Kingdom-based Kitlocker has implemented two Kornit Avalanche Poly Pro systems for efficient, retail-quality production of branded and customized apparel on demand.

Kitlocker operates within several sectors of the sports and leisurewear market, providing team gear for schools, football clubs, and other sporting organizations, managing e-commerce platforms on behalf of those organizations. Enabling their customers to embellish popular styles on demand, in any quantity, drove them to explore available technologies for speed and versatility, particularly regarding polyester apparel, a cornerstone of sportswear. Kornit’s Poly Pro system is the only single-step digital direct-to-garment (DTG) technology developed specifically for imprinting polyester and poly-blend materials, extending the company’s patented process for waste-free production with durability, precise graphic detail, and the broadest colour gamut to popular sports and athleisure apparel.

“The Kornit Avalanche Poly Pro allows for far superior quality of finish for embellishment compared to traditional print techniques,” says Mike Kent, Co-Owner of Kitlocker. “When we were shopping around for alternatives, it was obvious the sort of single pass, and its ability to print on polyester, was certainly market-leading—there was no alternative that could do that. The machines are quick and reliable, with very little downtime, which is massively important to me as a business owner.”

According to Kent, the technology has enabled Kitlocker to approach new markets that had always been off-limits previously, driving incremental business and building out new product ranges. The process lent itself to simple integration with their workflow and online design tools, empowering customers to visualize their own pieces and receive finished gear, with superior retail quality and precise logo colour matching, in mere days.

“The system allows us bigger print areas, more colours, and more elaborate designs, and our customers to uniquely embellish their garments on a wide range of products from different brands with lots of different kinds of creative outputs,” adds Kent.

“Our systems help brands like Kitlocker sync supply with demand, eliminating waste and making them more reactive to customer needs,” says Chris Govier, KDEU Managing Director. “Kornit Avalanche Poly Pro extends the efficiency, sustainability, quality, and logistical benefits of digitization to the booming sports and athleisure apparel market. Being able to give their customers the widest assortment of gear, customized in any quantity, on demand, is a winning game plan for Kitlocker.”