From the Sector

March 2019: For decades, Schoeller Textil has been meticulous in observing its responsibility to humans and the environment. Developed and produced in Switzerland under the most stringent conditions, the high-tech textiles and textile technologies encompass a spirit of innovative and outstanding quality. With a focus on sustainability, the groundbreaking, ecological portfolio includes, among other things, genuine upcycled products with ECONYL®-Garn, 100 % recycled, recyclable wear2wear woven and knitted fabrics or bio technologies based on sustainable raw materials.

High-quality textiles have a long service life and can remain in use for longer. The fabric properties are further improved by smart textile technologies such as water- and dirt-repelling functions. This helps preserve the environment and cuts down on the use of resources. In its manufacturing, Schoeller Textil AG always considers the ecological compatibility of its products. Therefore, since 2001, production at the Swiss site has always complied with the stringent guidelines of the bluesign® system. By conviction, Schoeller devotes itself to sustainable climate protection and takes part in the Energy Agency of the Swiss Private Sector programme to actively reduce carbon emissions and optimise energy efficiency.

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

Throughout the 1960s and 70s, the company continued to further improve its technologies, but it was the introduction of the first THEN AIRFLOW system at ITMA 1983 in Milan which significantly boosted the company’s fortunes, representing a milestone in the development of dyeing machines.

Prior to this, the dyeing of just one kilo of fabric required around 150 litres of water and THEN’s AIRFLOW system, invented by engineer Wilhelm Christ and colleagues, drastically reduced the requirement to between just 35-40 litres. Instead of the traditional dye liquor used for hydraulic fabric transport it efficiently distributed much smaller amounts of dye liquor via aerosol. This technology has subsequently been further developed in successive machine models and has made an enormous impact on sustainable dyeing operations.

Now, as FONG’S EUROPE, the company continues to innovate, and at ITMA 2019 is showcasing the THEN SMARTFLOW TSF hydraulic high temperature dyeing machine, designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing.

The company has a number of patents pending on the innovative new features of this machine, including the SMARTFLOW’s fabric transport design. This is based on a smart, winchless fabric transport system which eliminates the need for a loading rope, and a circular plaiter with programmable rotation speeds which provides full filling of the drop zone.

Its newly-developed nozzles and reel-less transport, in combination with smart controlled circular plaiting and variable chamber adjustment, provide even fabric treatment without entanglements and the highest loading capacity with the lowest kier volume

“Further developments, including the new THEN AIRFLOW PLUS system with a round design are in the development pipeline and will once again result in further reductions in power consumption without sacrificing performance,” says FONG’s Europe Sales Director Richard Fander. “Similar innovations are being made to our hydraulic long shape machine, the THEN SUPRATEC LTM. The ability to transport fabrics with reduced tension and without the need for a transport winch which is being introduced on all of our recent machines will allow new fabrics to be created and further increase the efficiency of textile finishing.

Fong’s Europe will be at stand D101 in Hall 2 at ITMA 2019.

On March 7th, European Commissioner on the Internal Market, Industry, Entrepreneurship and Small and Medium-Sized Enterprises has been welcomed in Prato by the mayor Matteo Bittoni and by the Councilor for Productive Activities Daniela Toccafondi, together with the economic categories for a meeting organized by the Department of Economic Development with reference to the Fashion System.

By the end of the meeting, the only company visit planned has followed, and brought to the Manteco headquarter. Manteco is a firm leader in the production of wool and recycled fabrics since 1943.  Today led by Matteo and Marco Mantellassi, Manteco is able to value territory, sharing economy, sustainability, internationalization and the use of renewable energies – not only as an investment policy but also as a distinctive element for the identification of the company as an international reference point for the fashion textile sector.

The company visit was attended by European Commissioner Elzbieta Bienkowska, Justina Morek, member of the Commissioner's Cabinet, Beatrice Covassi, director of the Representation of the European Commission in Rome, Slawomir Tokarski, director for advanced and innovative manufacturing in the general direction of the internal market and European Commission industry, MEP Hon. Nicola Danti, dr. Alberto Biginelli, Councilor Daniela Toccafondi; The Mayor of Prato Matteo Bittoni, the Mayor of the Municipality of Montemurlo, Mauro Lorenzini.

The key topic of the meeting has been the circular economy  – that is to consider very close to Manteco – along with some others explored such as the value of Made in Italy, the importance of a responsible approach to reuse and the need for a traceability system. Noteworthy the visit to the Manteco Archive, during which the focus has been on raw materials, with reference to the tradition and experience that today are perfectly combined with the strong innovative drive and creativity. Upon request of the European Commissioner, the corporate approach with a view to circular economy, km0 production system and how it fits into the productive district were also dealt with.
 
«I visited a textile company that recycles or reuses waste materials to produce wool of the highest quality: this is an excellent example of circular economy. The circular economy is an extremely interesting subject everywhere in Europe, because we are leaders in sustainability, and we want our children and ourselves to be able to live in a country that is livable in the future, so that's why it is worthwhile to show stories in Europe of success like this, which is a good practice that we are putting into practice, starting with the big industries and the energy-intensive ones » - Elzbieta Bienkowska -

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

Gianluca Croci's priority will be to support Lectra's French customers in their transformation towards Industry 4.0
Lectra announces the appointment of Gianluca Croci as Managing Director, Lectra France. Based in Paris, Gianluca Croci reports to Fabio Canali, President, Southern Europe & North Africa.

Gianluca Croci has more than 20 years of experience in the fashion industry. He began his career in 1998 in the department store chain La Rinascente before joining the Giorgio Armani group in 2002, where he managed, from 2006 to 2015, the Belgian and French subsidiaries. Gianluca Croci later held management positions for major fashion and luxury brands, such as Roberto Cavalli and Marcolin, and was recently the Sales & Marketing Director for Technogym France, a designer of sports equipment.

Gianluca Croci will fulfil Lectra's promise to fashion companies in France: to facilitate the digitalization of their know-how in order to empower them to make a successful transition to Industry 4.0. This ambition is being realized by the 2018 launch of the revolutionary solution, Fashion On Demand by Lectra, which enables fashion companies to customize a garment or make it to measure. This end-to-end personalization offer—the first of its kind—complements a portfolio that is known to solve the pressing challenges confronting the fashion industry. The latest, Kubix Link, developed by Kubix Lab, a start-up acquired by Lectra in January 2018, is an innovative platform for managing product information.

"France is known worldwide for being a leader in fashion and technological innovation. It is a country where brands, retailers and manufacturers have already begun their transformation towards Industry 4.0. I am proud to support our customers’ pursuit of greater connectivity and collaboration in their operations, as well as in assisting them to make the shift to personalization," says Gianluca Croci.
Gianluca Croci and his teams are committed to providing their French customers with the high level of expertise and service that characterizes Lectra's value proposition.
Gianluca Croci's efforts are also tied to the dynamic activities of Lectra Southern Europe & North Africa. There are many synergies in the region’s fashion industry, ranging from the sharing of expertise between French and Italian companies to the integration into their ecosystem of the Moroccan and Tunisian subcontractors.

"Our regional organization enables us to be closer to our customers’ challenges and to provide them with the support they need to achieve their ongoing targets. Gianluca Croci will lead the French teams and contribute to the region's growth," says Fabio Canali. "His extensive experience with major Italian and French companies brings new energy to the development of Lectra France.”
Gianluca Croci is a graduate of the European Institute of Business Administration (INSEAD), Fontainebleau (France), and the Catholic University of the Sacred Heart, Milan (Italy).

Chomarat, a leader in technical textiles and composite reinforcements, is developing its Coatings & Films business at its French sites. The Group has just acquired an extruder and a graining line to increase its production capacities and develop new, more efficient solutions, particularly in the field of TPO (polyolefin thermoplastics). These two technological investments are part of the €35 million investment plan announced by the Group in mid-2017.

AN EXPANDED OFFER WITH THE NEW GRAINING LINE
The graining line gives texture to the coated textile and provides a differentiation of appearance or a functionalization, such as non-slip or durability. "We will use this new technology to broaden the scope of material we process (including the production of TPO sheets with or without backing), and to improve the perceived quality by a better grain definition," explains Philippe Chomarat, Director of the Coatings & Films business at Chomarat. This technological investment enables the Group to increase its production capacities and offer new solutions for the automotive and luxury bag markets.

INCREASING PERFORMANCE WITH THE NEW EXTRUDER
The new extruder increases the Chomarat production capacity for coated textiles and allows production in larger widths. The technology consumes less energy and emits very low level of VOCs, in line with the Group's sustainable approach. It also supplements existing solutions for developing biosourced coated fabrics. "This is a strategic investment for Chomarat, as in addition to PVC, we will be able to work with new materials such as TPO, TPU and new biosourced materials. We will offer innovative solutions for all our markets—pipes, luxury bag, automotive and protection," concludes Philippe Chomarat.

• Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
• Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
• UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

Using UltraBond manufacturers finally gain the potential to cost-efficiently produce 100% recyclable carpets. In addition to the general benefits of making recycled PP available for the plastics production chain and reduced waste generation, environmental advantages and financial savings arise from a total lack of water and less energy use. As a 100% dry process, thermal bonding uses no water and results in a total absence of waste water. There is also a reduction in the VOC level of the carpet. This all leads to a significant reduction in a needlepunch carpet’s ecological footprint.

The sustainability benefits are quantified through lifecycle analysis (LCA) of an exhibition carpet application – among the primary applications for needlepunch carpets. Evaluations show that the absence of water consumption directly translates into a large energy saving of 93% when using UltraBond compared to a latex bonding solution, and also a potential annual water saving of over 20 million litres for 100 million m2 of exhibition applications in the EU. Without the addition of any other bonding agent, CO2 emissions are reduced by 35% over the full production process.

Karena Cancilleri, Vice President Beaulieu Engineered Products, Beaulieu International Group, commented, “Recyclability and achieving a greener, more cost-effective production process without compromising on current performance levels are significant unsolved topics within today’s carpet industry. By eliminating the need for latex and chemical binders through UltraBond, we offer needlepunch manufacturers a breakthrough they have been looking for that boosts environmental and economic sustainability. We see textile flooring as just the beginning. Together with our customers, we look forward to exploring the potential of this unique thermal bonding fibre in other applications such as laminated nonwovens or as an alternative to dry powders.”

Discover more about UltraBond from the Beaulieu Fibres International team at Stand B56 Hall 11, Domotex 2019 in Hannover, Germany from January 11-14, 2019.

CHOMARAT, the specialist in composite & construction reinforcements and coated fabrics, has demonstrated the Group’s determination to pursue a sustainable process by earning environmental management (ISO 14001) and energy management (ISO 50001) certification for its French sites. “By obtaining both ISO 14001 and ISO 50001 certification, CHOMARAT now has a tested and standardized framework for developing an effective, sustainable environmental and energy management strategy,” says CHOMARAT Environment and Energy Manager Laurent VÉRITÉ.

Minimizing environmental impacts & optimizing energy use
ISO 50001 certification is validation of efficient energy management, with the bonus of lower energy consumption and the tools needed to address a warming climate. ISO 14001 certification is based on standards and requirements, and it constitutes an international benchmark for environmental management systems. “CHOMARAT is committed to a responsible and sustainable process for all of its activities in France. With ISO 14001 certification, the Group is incorporating environmental requirements into its management and production systems,” explains CHOMARAT France CEO Raphaël LAURENT.

Pursuing a long-term strategy
This twofold certification is in keeping with CHOMARAT’s long-term vision. “Our strategy is implemented through new investments and international development. But the Group is also actively involved in sustainable development and a sustainable innovation initiative,” explains Raphaël LAURENT. Measures that have been implemented include reducing the noise level, preventing pollution risks and improving waste management. Fluorescent lighting has been replaced by LEDs; new, more energy-efficient equipment has been installed; and the heating and air-conditioning ductwork has been insulated to reduce fuel-oil consumption.
“It is thanks to the combined efforts of all CHOMARAT’s teams that we were able to obtain these two certifications. For us, this is our first milestone towards a sustainable economy,” concludes Laurent VÉRITÉ.

Decline in revenue due to lower prices for standard viscose, less favorable currencies and lower production volume

• Pressure on prices for key raw materials remains high
• Positive impact due to focus on specialty fibers and further optimization of the product mix
• Expansion project in Mobile temporarily mothballed
• Acquisition of the remaining 30 percent of Lenzing (Nanjing) Fibers Co. Ltd.

The Lenzing Group recorded a solid business development in the first three quarters of 2018. The decline in revenue and earnings compared with the same period of the previous year was essentially based on a mix of lower prices for standard viscose, more unfavorable exchange rates and price increases for key raw materials. The Lenzing Group’s strategic orientation with a focus on specialty fibers had a positive impact in this environment.

Revenue decreased by 5.2 percent to EUR 1,636.2 mn over the comparative period of the previous year. Apart from the high starting base, this was primarily attributable to the expected challenging market environment for standard viscose, less favorable exchange rates and lower production volume. EBITDA (earnings before interest, tax, depreciation and amortization) recorded a decline by 26.8 percent to EUR 290.6 mn due to price increases for key raw materials and higher energy and dissolving wood pulp prices. The EBITDA margin dropped from 23 percent in the first three quarters of the previous year to 17.8 percent. EBIT (earnings before interest and tax) fell by 36.2 percent to EUR 190.3 mn, leading to a lower EBIT margin of 11.6 percent (01-09/2017: 17.3 percent). Net profit for the period dropped by 39 percent from EUR 219.3 mn in the previous year to EUR 133.8 mn. Earnings per share equaled EUR 5.06 (01-09/2017: EUR 8.12).

“The Lenzing Group is currently operating in a challenging environment. Against this background, we are satisfied with the solid business development and the corporate strategy sCore TEN has a positive impact. The new production line in Heiligenkreuz started up successfully and customers’ feedback has been positive,” says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “While many viscose producers are faced with a very tense profit situation, we are well positioned due to our specialty strategy and still expect a satisfactory full year”, Doboczky adds.

Key strategic measures were implemented during the first three quarters of 2018 in line with the sCore TEN strategy. The start-up of new capacities for lyocell fibers in Heiligenkreuz, the production start of LENZING™ ECOVERO™ fibers at the Nanjing site and the investment in another pilot line for TENCEL™ Luxe filaments are important steps to accomplish the goal of increasing the share of specialty fibers in total revenue.

Project in Mobile temporarily mothballed
Due to the decision to temporarily mothball the lyocell expansion project in Mobile, Alabama (USA), in view of the buoyant US labor market and trade tensions between the major trading blocks, the implementation of the expansion plan for specialty staple fibers will be slowed down. The Lenzing Group will put all its effort to readjust the execution of its growth plan to meet strong market demand for its lyocell fibers. This includes an increased focus on the lyocell expansion project in Prachinburi (Thailand).

Advancing forward solutions
Regarding the capacity expansion for specialty products such as TENCEL™ Luxe filaments and LENZING™ ECOVERO™ viscose fibers, Lenzing is still on track. After the introduction of TENCEL™ Luxe branded lyocell filament yarns in the previous year, Lenzing continues to drive innovations in the area of the value chain. In September, the company also announced the successful development of the LENZING™ Web Technology, a new technology platform focusing on sustainable nonwoven products, which will lead to new market opportunities for the industry. Following several years of research and development work and investments totaling EUR 26 mn, the pilot plant at the headquarters in Lenzing has been successfully put into operation.

Largest dissolving wood pulp line worldwide
At the end of June, the Lenzing Group and Duratex, the largest producer of industrialized wood panels of the southern hemisphere, announced that they had agreed on the terms and conditions to form a joint venture to investigate building the largest single line dissolving wood pulp plant in the state of Minas Gerais (Brazil). This decision supports the self-supply with dissolving wood pulp and the growth in specialty fibers. The joint venture is investigating the construction of a 450,000 t dissolving wood pulp plant, which is expected to become the largest and most competitive single line dissolving wood pulp plant in the world. The final investment decisionto build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

Acquisition of Chinese operation
At the beginning of November the takeover by the Lenzing Group of the remaining 30 percent of its Chinese subsidiary Lenzing (Nanjing) Fibers Co. Ltd. (LNF) from its state-owned joint venture partner NCFC was completed. After closing of the transaction, the Lenzing Group will hold 100 percent of LNF. The acquisition will have a negative impact on net profit of approx. EUR 21 mn for the fiscal year 2018. The purchase of the shares supports Lenzing’s strategic growth as a producer of specialty fibers from the renewable raw material wood in China and worldwide. It paves the way to setting up further production lines for specialty fibers. Lenzing wants to convert LNF into a specialty fibers hub over time.

Expansion of capacities
CAPEX (investments in intangible assets and property, plant and equipment) rose by 35.5 percent year-on-year to EUR 174.1 mn in the first three quarters of 2018. This is primarily attributable to capacity expansions in Heiligenkreuz and the expansion of the existing dissolving wood pulp plant in Lenzing as well as the investments made so far in Mobile.

Outlook
Demand development on the global fiber market remains positive. Lenzing expects wood-based cellulosic fibers to continue to grow at a higher rate than the overall fiber market. In a challenging market environment the Lenzing Group expects solid results for 2018, albeit lower than in the outstanding last two years.

For 2019, Lenzing expects standard viscose markets to remain under pressure because of an ongoing oversupply and very high raw material prices. Lenzing’s specialty fiber business is expected to continue the very positive development.

The above-mentioned development reassures the Lenzing Group in its chosen corporate strategy sCore TEN. Lenzing is very well positioned in this market environment and will continue its consistent focus on growth with specialty fibers.

Koch Membrane Systems (KMS), a global leader in the development and manufacture of membrane-based filtration technologies, announces the commissioning of a PURON® PLUS packaged MBR system in Saskatoon, a city within the province of Saskatchewan, Canada.

The PURON® PLUS system provides a compact and turnkey wastewater treatment solution that is fully automated and provides consistent high-quality effluent for safe discharge or reuse.
 
Due to Canada’s challenging climate and dispersed populations outside of city areas, simple and reliable decentralized treatment systems are often preferred to treat municipal wastewater streams. As a differentiated membrane and system provider, KMS has been selected for this project due to their ability to provide a comprehensive solution with market leading technology.
 
For this project, KMS partnered with Proteus Water Inc., a Canadian company focused on providing integrated wastewater treatment solutions for small communities.
 
“We decided to go with KMS modules due to their reliable, compact and efficient MBR solutions,” said Jason Tratch, president and CEO of Proteus Water. “Compact MBR systems are the only answer for the small municipalities in Canada, meeting the financial expectations as well as the technical challenges. The PURON® PLUS system featuring PULSION MBR membranes is here with a very promising solution due to its increased efficiency and its decreased footprint.”
 
Capable of treating an average design flow of approximately 100,000 gpd (375 m3/d) of municipal wastewater, the PURON® PLUS P-100 system selected for this project features KMS’ latest innovative and patented PULSION® MBR technology. The benefits of PULSION® MBR offer best in class reliability and productivity with the lowest energy consumption.
 
“The efficiency and the reliability of MBR systems has been proven in thousands of places all over the world and it will be the best applicable solution for the Canadian market,” said Jack Noble, general manager Water and Wastewater (EMEA) of Koch Membrane Systems.