From the Sector

Since 2018 the CHT Group has broken new ground in communication with BeSoEFFECTIVE. Complex chemical interrelations are translated into simple and hardly technical words in combination with stylistically clear pictures.

The Best Solutions ”BeSo“ were specifically tailored to the communication with the target group of textile brands and retailers and do therefore not only appeal classic B2B clients but are also visible and comprehensible for end consumers of textile goods. The agency RTS Rieger Team from Leinfelden-Echterdingen that had already supported the new brand identity of the CHT Group in 2017 assisted CHT again in developing and creating the BeSoEFFECTIVE concept. One year after its publication, the communication concept has now achieved great success. BeSoEffective was honoured with the GWA Effie Award 2019 in bronze in Frankfurt am Main on 14th November.

Since 1981 the Effie has been awarded for efficiency in marketing communication by the Gesamtverband Kommunikationsagenturen GWA (general association of communication agencies). It’s not exclusively the convincing look or content of campaigns that is honoured by the jury of experts with the GWA Effie Award but it’s rather the proven success and efficiency of such ideas and campaigns. By using the BeSoEFFECTIVE communication the CHT Group has so far increased the brands’ & retailers’ demand for innovative effects by about 30 %.

with CHT products are put in a nutshell by BeSoEFFECTIVE. The brand promise BeSo (”Best Solution“) is supplemented by an effect name deriving from the corresponding functionality – BeSoCOOL, BeSoFRESH or BeSoSMOOTH. Thus, each effect of the portfolio is given a uniform yet individual branding and a clear structure. The functionality of each effect is supplemented by pronounced and symbolic pictures which visually stress the benefits.

Eric Knehr, Head of Brand & Retail Service of the CHT Group states: “To us its of utmost importance to speak our target group’s language. Therefore, our BeSoEFFECTIVE campaign focuses on a clear communication with unique pictures and a uniform effect branding. Our customers’ positive reactions and this award prove, that our strong concept optimally supports our daily work as well as market and customer demands. However, it also puts the excellent performance of our innovative and sustainable effects into the right light."

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation is pleased to invite you to meet us at DyStar’s Booth H11 of Hall C1, Performance Days at Munich from 13 to 14 November.

Bernhard Knoche, Global Head of Brand & Retailer Management said, “This is our second time at the event, and we are elated to have five of our new developments chosen by the Jury of PERFORMANCE FORUM to be displayed on the Wall Special. Learn and find out how DyStar’s products can help you shape a more sustainable manufacturing journey with us.”

Manufacturers, Brands and Retailers will see intangible benefits from the five winning concepts featured on the Wall Special, namely DyStar CADIRA® Reactive, DYCON® HF on TENOWA® 1, DYCON HF on TENOWA 12, DYCON HF on TEXLENE®, DYCON HF on CERAMICA® GREEN.

DyStar’s Cadira Reactive is a resource saving module which was first launched in 2016. The Cadira concept supports in reduction of water, waste, and energy consumption. And as another sustainable solution offering the DYCON HF series, being the most cost efficient and resource saving continuous process for cellulosics and blends with PES, PA and PU fibres.

The two-day trade fair for the functional fabrics industry highlights a wide range of solutions for Manufacturers, Brands and Retailers globally. At DyStar’s booth, we welcome you to discuss opportunities for collaborations that will help to make the industry cleaner.

As of October 1st, 2019, the Netherlands-based global market leading manufacturer of advanced automation equipment and solutions for composites, Airborne, strengthens its activities particularly in German speaking countries, the so-called D-A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC. The Dutch company is looking for specialised partnerships to develop and deepen its international business opportunities in the aerospace and automotive markets.

Airborne’s focus is on high-end composite components, at high production rates at radically low conversion costs. Airborne is building up a suite of automated solutions for the manufacturing of composites with the aim to radically reduce costs and touch labour, minimize the footprint and use of material, and improve the time to market for their clients. The company offers i.a. solutions in automated honeycomb potting, automated kitting and automated lamination of thermosets and thermoplastics. In order to develop new business opportunities in the D-A-CH region for the end-markets aerospace and automotive, Airborne is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Dr. Effing, CEO of AMAC GmbH confirms: "As a first step for the establishment of Airborne on the German market, we just signed their membership at AZL in Aachen which will help to connect with over 80 companies and latest research developments. In the framework of theirstrategy to strengthen the supply to the aircraft sector, Airborne will also exhibit at the Aircraft Interiors Expo in Hamburg from March 31st to April 2nd 2020.”

Fortum, together with the sustainable fibre technology company Spinnova have today introduced the first prototype product born out of their joint development of using wheat straw in the production of highly sustainable textile fibre.

Fortum and Spinnova are showcasing the world’s first clothing made from agricultural waste, namely wheat straw, at the Textile Exchange Sustainability Conference in Vancouver, during 15-17 October. The showpieces include a knitted t-shirt, as well as a jacket and skirt made of a woven fabric on organic cotton warp.

The prototype material is unique also due to its extremely low environmental impact from raw material extraction, processing and manufacture, verified by life-cycle analysis (LCA).

“We are very excited to present this revolutionary textile. Today, wheat straw is mostly discarded or even burned in the fields. As it can now be used in numerous textile applications, this opens up huge possibilities globally. This cooperation is a tangible step towards Fortum’s strategy to build options for significant new businesses that improve resource efficiency and provide smart solutions for a cleaner world. We would like to invite more key industry players to join us in this journey,” says Heli Antila, VP, Biobased solutions at Fortum.

“We are all very proud of this amazing collaborative accomplishment! This was a very fast journey from the first trials to real, appealing fabric materials. This shows that wheat straw-based fibre is well on its way to being a drop-in product of the most sustainable kind,” says Spinnova’s CEO Janne Poranen.

On-demand production a focal point of Industry 4.0 demonstrations at CISMA, Asia’s major garment and textile technology exhibition
Lectra unveiled its flagship Industry 4.0 solutions for Asia—Fashion On Demand by Lectra and Furniture On Demand by Lectra—as well as the new VectorAutomotive iP9 fabric-cutting solution for automotive seating and interiors this week, at the 2019 edition of the China International Sewing Machinery and Accessories (CISMA) exhibition in Shanghai.

Under the banner “Lectra 4.0: Digitalizing and Connecting Your Value Chain”, Lectra asserted its leadership as the trusted advisor to fashion, furniture and automotive companies undertaking digital transformation. Smart, connected supply chains are at the core of the fourth industrial revolution. In all industries using textiles, the intelligent factory requires a high degree of flexibility, maximum efficiency and optimal planning processes for a variety of production types, from mass production to on-demand production. These requirements are paramount to the future success of companies competing for business on Asian markets.

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

The machines’ reliably low energy consumption is an important characteristic for decision-makers to take into account. Achieved by means of an optimised spindle drive as well as a great variety of spindle and feeding sizes for all kinds of applications, it is the main element in the equation of production costs.

Power consumption and costs are closely related, with energy efficiency positively influencing the return on investment, since it is daily challenge to process the maximum feeding weight while keeping electricity usage at a comfortable level.

The machine’s short set-up times, fast air threading and easy handling were key considerations with regard to optimising ergonomics.

COBRA International is collaborating with HG Robotics, a leading drone manufacturer that specializes in unmanned aerial vehicles (UAVs) for the agricultural market, on a composite fuselage cover for the cutting-edge Tiger Drones.

Undertaking a full range of services with HG Robotics and having been involved from the outset: from the design and engineering through to the prototyping of the composite drone fuselage cover, COBRA has now delivered nearly 100 sets and will produce approximately 500 units throughout 2019.

The multi-rotor Tiger Drones typically carry spraying equipment and can also carry high definition cameras that provide a wide range of field information. Farmers can measure land profiles, identify any problem plants or areas and manage their cultivation in the most efficient way. The 420 mm square shaped fuselage cover protects the drone’s electronic controls and forms an aerodynamic fairing between the central fuselage and the craft’s 4 rotor arms.
 
The COBRA Design and Development team selected a composite laminate of glass fibre reinforcements for the cover – which don’t interfere with GPS signals used by the drone - and combined these with epoxy laminating resins in a hand laminated, vacuum bag consolidated production process.

COBRA also designed all of the mould tools for the project. The 2-piece aluminium mould was produced by one of COBRA’s long-term tooling partners. This metallic tooling provides an excellent surface finish to the part with absolutely minimal trimming and finishing required.   Moulded parts can go swiftly through a painting and clear coating process before final inspection and delivery to the client.

Danu Chotikapanich, CEO of COBRA International comments: “Our collaboration with HG Robotics is going well, and we are hoping to collaborate further with them on other multi-rotor and fixed wing VTOL (vertical take-off and landing) drone models in the future. These are COBRA’s first parts for the agricultural industry, and they provide an exciting vision as to just a few of the possibilities for lightweight composites in this area and also in the wider commercial UAV market as a whole.”

It’s well-known that the astonishing success of China’s economy over the past decade has sent wages soaring and made it difficult for the country’s textile manufacturers to find and retain trained machine operators, while operating in a highly competitive market where optimised production and full resource efficiency are of paramount importance.

In direct response to this situation, A. Monforts Textilmaschinen GmbH & Co. KG has introduced a range of new Industry 4.0 technologies aimed at simplifying machine operation while providing easy access to all data and instant or remote assistance.

At the forthcoming Shanghaitex 2019 textile machinery exhibition, which takes place from November 25-28 in Shanghai, Monforts specialists will be at stand A10 in Hall W and look forward to discussing the company’s latest developments in this area with valued Chinese customers.

They include the latest Qualitex full touch panel control system, with its digital twinning capability and Smart Check and Smart Support apps, reinforced by the comprehensive Monforts Smart Sensor machine monitoring programme.

In a strongly declining market, Autoneum increased revenue in local currencies by 1.9% in the first six months of 2019 thanks to numerous model ramp-ups. At CHF 1 156.1 million, revenue in Swiss francs reached the previous year’s level (CHF 1 159.4 million). All four Business Groups outperformed the market. The turnaround program in North America is showing progress, but the persisting operational inefficiencies at two US plants continue to impact the profitability of the entire Group, as already communicated. Accordingly, EBIT fell to CHF 16.4 million in the first semester, while the anticipated negative net result totaled CHF –6.0 million.

The weak global macroeconomic environment, ongoing trade disputes and the resulting uncertainty among car manufacturers and consumers led to a further sharp decline in global light vehicle production in the first half of 2019. In this difficult market environment, Autoneum was able to increase its revenue by 1.9% in local currencies in the first six months compared to the prior-year period, particularly thanks to numerous model ramp-ups. At CHF 1 156.1 million, revenue in Swiss francs reached the prior-year’s level (CHF 1 159.4 million). While the number of vehicles produced in all regions declined, Business Groups (BG) North America, Asia and SAMEA (South America, Middle East and Africa) grew and outperformed the respective market developments, two of them significantly. Only at Business Group Europe did the sharp drop in production volumes among vehicle manufacturers result in fewer call-offs and lower year-on-year revenue.

• For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

The innovation was developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Helizarin® LTC New is a binder designed for low temperature curing or no curing. This allows to reduce the fixation temperature and time compared to conventional pigment printing processes. In addition, manufacturers will not experience the change of shades that sometimes occur with high temperature processes.

When using Helizarin® LTC New, textile manufacturers can therefore improve the productivity of their printing process and reduce their energy consumption.

Helizarin® LTC New is also a welcome solution for textile manufacturers who do not have curing equipment, since it offers similar to better fastness than commodity binders that have been treated through a full process, and excellent fastness on synthetic fibers such as polyester and polyamide.

When it comes to the final result on the fabric, Helizarin® LTC New allows the creation of soft and durable prints for premium quality articles.

The new product will be the core of Archroma's Cool Print, a complete formaldehyde-free* system that keeps printed textiles soft and durable, and the planet cooler.

The system, which combines Helizarin® LTC New with Luprintol® softening and fixing auxiliaries and Printofix® pigment preparations, allows manufacturers to realize potential savings of up to 30% in processing time, 45% in energy consumption and 44% CO2 emissions – compared to benchmark pigment printing.

Helizarin® LTC New, as well as the Cool Print system, is formaldehyde free* and registered under REACH. It can be used in line with the ZDHC & bluesign® requirements, is compliant with the Oeko-Tex Std 100 Class 1 standard for baby wear, and with the MRSL of the most major brands.

“Helizarin® LTC New was developed by Archroma’s R&D team together with experts at our Global Competence Center for Printing, based in Barcelona, Spain”, says Joaquin Femat, Head of Business Development for Printing, Brand & Performance Textile Specialties, at Archroma. “As The Archroma Way is based on Safe, Efficient and Enhanced as its three pillars, we designed an innovation that offers our customers a balanced combination of resource optimization, safe handling, and controlled effluent. Because it’s our nature!”