From the Sector

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel Neumarkt was one of eight industrial partners supporting the university team throughout the project, providing all carbon fiber prepreg materials used for the drone’s landing gear as well as the fuselage. The ultra-lightweight 32g landing gear was laid up and cured in the press, whereas the fuselage was autoclave cured by the student team using Hexcel HexPly M901 and HexPly M78.1 prepreg resin systems with a combination of woven and unidirectional carbon fiber reinforcements.

With the development of Unmanned Aerial Vehicles (UAV) as a key emerging market and innovation space in the transportation sector, Hexcel’s collaboration with the University of Applied Sciences Upper Austria team not only creates an important link with the next generation of lightweight composite engineers but also highlights the weight saving and structural benefits of Hexcel composite material solutions.

"The massive weight saving achieved with their updated version of the camera drone is a fantastic achievement by the student team," said Michael Rabl, Dean of FH Wels of the Upper Austria University of Applied Sciences. "The joint study not only illustrates the wide range of complex and innovative composite techniques present in the drone sector but also presents the opportunities that exist for further development in the wider Urban Air Mobility (UAM) and aerospace composites markets.”

Hexcel congratulates the project team which includes Lukas Weninger, Karl-Heinz Schneider, Jakob Schlosser, Matthias Thon, Marla Unter, and Simone Hartl on an exceptional piece of lightweight composite design and thanks them for showcasing the contribution of Hexcel materials with a presentation and drone flight. Johanna Arndt, research and technology group leader at Hexcel Neumarkt, said, “It was a great pleasure to work with the team who were very cooperative and self-motivated to succeed. Watching the drone just fly around the Neumarkt plant was just great.”

Hexcel manufactures a complete range of carbon fibers, dry carbon UD tapes, specialty reinforcements, prepregs, and honeycomb core materials, providing customized manufacturing options for new UAM applications that combine aerospace reliability with the high-rate production required. Hexcel composite materials are the ideal solution for the lightest and most efficient cost-competitive transportation vehicles of the future.

Wülfing GmbH is one of the oldest but also one of the most modern home textiles companies in Germany, with its main weaving and finishing operations located in Borken, North Rhine-Westphalia, and a further jacquard weaving mill in Steinfurt, as well as with a making up and packaging plant in the Czech Republic.

At its Borken plant, Wülfing has employed a Monforts sanforizing line since 2009 to guarantee the required dimensional stability and shrink-fastness of its high quality bed linen. With a working width of over three metres, the sanforizing process is a central pillar in the production of typical wide-width cotton fabrics for home textiles.

In 2017, the company was able to acquire a second Monforts sanforizing line from another company which, although built in 2005, had been virtually unused. It was overhauled and installed behind a Monforts equalizing frame of a similar age.

“Unfortunately, the two machines had to be operated separately via individual controls and did not represent an integrated unit,” says Schulte-Mesum. “This resulted in deficits in the desired productivity and in the control technology.”

Wülfing consulted with Monforts on a number of upgrade options and opted for a completely new joint control system to merge the two machines, as well as a new connecting inlet, a tensioning and damping field and a steaming unit.

“Monforts provided a fast and precise erection and commissioning of the technology in spite of the difficult pandemic circumstances,” says Schulte-Mesum. “The result has been an increase in production speeds by 20% and enhanced uniformity in fabric width through a much improved guidance system.

“We are also achieving energy savings as a result of the new control and drive technology and operation has been simplified and improved as a result of the unified control. We benefit from simplified access for maintenance work such as the grinding of the rubber blanket, but most of all we have greatly improved our flexibility and now have two almost identical Monforts sanforizing lines.”

Studio Seidensticker, eine neue Menswear orientierte Kollektion. Der kosmopolitische Look richtet sich an eine moderne, global vernetzte Community und schlägt die Brücke zwischen aktuellen Trends und dem Know-How eines Hemdenspezialisten. Der Fokus auf Style und Identität lässt klassische Kategorien, Trageanlässe und Gendernormen hinter sich. Dabei geht es nicht nur um ästhetische Codes sondern, auch um Toleranz, eine klare Haltung zu gesellschaftlichen Veränderungen und einen respektvolleren Umgang mit Ressourcen, der sich unreflektiertem Konsum entgegenstellt. Labeling, Bildsprache und das gesamte Branding verfolgen einen betont zeitgeistigen urbanen Ansatz. Alle Aspekte der Kollektion sind perfekt aufeinander abgestimmt und beliebig miteinander kombinierbar.

Weitere Informationen finden Sie hier.

Circular fashion and textile technology group Infinited Fiber Company has secured investments totaling 30 million euros in its latest financing round completed on June 30. The round also brought Infinited Fiber Company new investors, including sportswear company adidas, Invest FWD A/S, which is BESTSELLER’s investment arm for sustainable fashion, and investment company Security Trading Oy. Among the existing investors contributing to this round of financing were fashion retailer H&M Group, who was the lead investor, investment company Nidoco AB, and Sateri, the world’s largest viscose producer and a member of the RGE group of companies.

This securement of new funding follows Infinited Fiber Company’s April announcement of plans to build a flagship factory in Finland in response to the strong growth in demand from global fashion and textile brands for its regenerated textile fiber Infinna™. The factory, which will use household textile waste as raw material, is expected to be operational in 2024 and to have an annual production capacity of 30,000 metric tons. The new funding enables Infinited Fiber Company to carry out the work needed to prepare for the flagship factory investment and to increase production at its pilot facilities in the years leading to 2024.

“We are really happy to welcome our new investors and grateful for the continued support from our older investors,” said Infinited Fiber Company co-founder and CEO Petri Alava. “These new investments enable us to proceed at full speed with the pre-engineering, environmental permits, and the recruitment of the skilled professionals needed to take our flagship project forward. We can now also boost production at our pilot facilities so that we can better serve our existing customers and grow our customer-base in preparation for both our flagship factory and for the future licensees of our technology.”

H&M Group is one of Infinited Fiber Company’s earliest investors. They first invested in Infinited Fiber Company in 2019.

H&M Group has also signed a multiyear sales deal with Infinited Fiber Company to secure its access to agreed amounts of Infinna from the planned flagship factory.

New investor BESTSELLER has struck a similar sales deal with Infinited Fiber Company.

In addition to strong interest by global fashion leaders, the technology has significant promise for major textile fiber producers. Allen Zhang, President of Sateri, said: “Sateri is excited to continue to invest in and collaborate with Infinited Fiber Company as part of our long-term commitment towards closed-loop, circular and climate-positive cellulosic fibers. This financing round marks a major milestone for our collaboration in scaling up next-generation fiber solutions.”

Infinited Fiber Company’s flagship plant preparations are also proceeding on other fronts. Several Nordic and international investment banks have given Infinited Fiber Company proposals on the financing options for the investment.

Infinited Fiber Company’s technology turns cellulose-based raw materials, like cotton-rich textile waste, into Infinna, a unique, premium-quality regenerated textile fiber with the natural, soft look and feel of cotton. Infinna is biodegradable and contains no microplastics, and at the end of their life, garments made with it can be recycled in the same process together with other textile waste.

Sateri, one of the world’s largest viscose producers and a member of the RGE group of companies, continues its collaboration with Infinited Fiber Company, a textile fibre technology group based out of Finland, and participated in the company’s latest EUR30 million funding round completed on 30 June 2021. In addition to existing investors like Sateri, Infinited Fiber Company has attracted new investors including adidas and BESTSELLER.

This securement of new funding follows Infinited Fiber Company’s April announcement of plans to build a flagship factory in Finland in response to the strong growth in demand from global fashion and textile brands for its regenerated textile fibre Infinna™. The factory, which will use household textile waste as raw material, is expected to be operational in 2024 and to have an annual production capacity of 30,000 metric tons. The new funding enables Infinited Fiber Company to carry out the work needed to prepare for the flagship factory investment and to increase production at its pilot facilities in the years leading to 2024. The engineering progress supported by the additional funds also accelerates Infinited Fiber Company’s ongoing collaboration and potential technology licensing with Sateri.

Sateri strategically contributes to RGE’s commitment and strategic business direction. Sateri has developed and produced a diverse range of circular and sustainable products including Lyocell and FINEX™, which is made from recycled textile waste. The in-house R&D efforts and the investment in Infinited Fiber Company are part of RGE’s $200 million investment commitment to advance next-generation textile fibre innovation and technology.

Pulcra Chemicals, with headquarters in Geretsried (Germany) has announced its first acquisition in its history by acquiring fellow-industry player Devan.

Devan, with origins since 1977 and Belgian headquarters, is since 2013 owned by Pentahold (a Belgian private equity fund). Devan is known from its antimicrobial range BI-OME, its large sustainable track record with a.o. probiotics solutions, a wide range of recently introduced bio-based textile finishes and a long standing in Thermoregulation and Flame Retardants. Devan has offices in the UK, Portugal, the US and a team in Shanghai.

The acquisition price will not be disclosed.

Marabu is one of the first ink manufacturers to achieve climate neutrality. All Marabu Business Units will, where possible, make a specific contribution to achieve the 17 United Nations Sustainable Development Goals (SDGs) with PROJECT GREEN and therefore participate in the Green Deal.

"We are safeguarding the future of the next generations and are proud that we have managed to be a climate neutral company from July 2021 with the Tamm and Bietigheim sites. All our products, whether printing inks or creative colours, are climate neutral, too," explains York Boeder, CEO Executive Committee. "Our so-called PROJECT GREEN combines all measures that are taking us on our journey to climate neutrality. Climate protection is a particular concern for us, to which we have made a binding commitment within the scope of an extensive sustainability strategy. In accordance with our Marabu Green Deal, we avoid and reduce emissions wherever possible, e. g. by using green electricity, energy-saving schemes, mobility concepts or environmentally friendly materials. We offset all unavoidable CO2 emissions by supporting internationally certified climate protection projects. We are continually implementing measures to improve our carbon footprint and update them annually to make their success measurable. We have therefore set ourselves the active goal of reducing our CO2 emissions by another 25 % by 2030."

For decades, Marabu has invested in the research and development of safe production processes, environmentally friendly products, and clean technologies with the aim of preserving the natural environment. Marabu has worked with Climate Partner to analyse all the CO2 emissions from the sites in Tamm and Bietigheim and determine its carbon footprint. Including all product-related factors such as raw materials and logistics, Marabu currently generates approx. 18,500 tons of unavoidable CO2 emissions. This value is the positive result of a number of climate-friendly measures pursued by Marabu, such as the early switch to green electricity in 2007.

Marabu's main activities to avoid and reduce CO2 emissions:

• Energy - Switching to green electricity from hydropower
• Mobility - Migration of the company's vehicles to electric and hybrid cars as well as in e-charging stations
• Production - Use of renewable energies and resource-efficient production processes
• Raw materials - Replacing critical substances with environmentally friendly alternatives for new and existing products
• Transporting - Climate-neutral freight carriers and lower-emission transport methods like shipping or road transport replace air freight wherever possible
• Product technology - Modern, low-emission products

Gemeinsam mit Simon Kolar, Koch im Restaurant Landhof in Oftersheim, Botschafter des Institute of Culinary Art und Gründer der Bewegung Guerilla Chefs, hat der Kleinostheimer Workwear-Produzent Weitblick eine brandneue Kochjacke entwickelt.

Komfortabel im Schnitt, modern, schlicht und leicht auf der Haut – die neue Kochjacke hat nichts mehr mit der steifen, unbequemen Kochkleidung vergangener Tage gemeinsam. Senior Product Manager, Thomas Schmitt war es bei der Entwicklung besonders wichtig, jedes einzelne Detail konkret auf die Bedürfnisse eines Kochs abzustimmen. Mit dem eleganten Design eines Kochhemdes ist das neue Stück bestens geeignet für den absoluten Koch-Trend des Frontcookings. Verdeckte Knopfleisten, ein moderner Stehkragen, krempelbare Manschetten und die Zwei-Taschenlösung zum Verstauen von Küchen-Utensilien sowie dem Handy überzeugen ebenso wie die bequemen Bewegungsfalten am Rücken. “Zudem ist unsere neue Kochjacke mit den drei möglichen Personalisierungsbereichen hoch individualisierbar. Ein riesiger Vorteil, um das unternehmensinterne Branding perfekt sichtbar zu machen“, erläutert Thomas Schmitt. Hergestellt in den europäischen Betrieben und mit Fairtrade-Baumwolle, überzeugt die Kochjacke auch in Punkto Nachhaltigkeit und Qualitätsanspruch.

Schmitz Textiles wird umfassend restrukturiert. Eine Liquidation ist abgewendet – 106 Arbeitsplätze sind gerettet. Darauf haben sich der Betriebsrat und die Geschäftsführung beim Emsdettener Textilhersteller geeinigt. Die angestrebte Neuausrichtung sieht eine Konzentration auf die Produktion von Outdoor-Geweben vor.

Das Familienunternehmen wird unter demselben Namen und neuer Ausrichtung weitergeführt. Zukünftig konzentriert sich der Textilhersteller auf seine Kernkompetenz: die Herstellung von UV- und wetterbeständigen Polyester-Geweben. Entsprechend liegt der Fokus auf der Produktion von Markisen-, Zelt-, Maritim-, Verdeckstoffen. „Damit stellen wir Schmitz Textiles zukunftssicher auf, da wir in diesem Bereich einer der marktführenden Produzenten sind“, so Dan Schmitz, Geschäftsführer der Holdinggesellschaft Schmitz-Werke GmbH + Co. KG. „Das bedeutet im Klartext aber auch, dass wir uns von den Marken drapilux und mobiltex verabschieden.“

Aus für Indoor-Textilien
Bisher bot der Textilproduzent mit der bekannten Marke drapilux umfassende, intelligente textile Lösungen für den Innenbereich von Objekten an. Angesichts hoher Lohn- und Energiekosten sowie zunehmend strengerer Regularien kämpfte das Familienunternehmen jedoch seit Langem darum, sich am Markt zu behaupten und sich rentabel und zukunftsfähig aufzustellen. Nachdem mehrere Sanierungsversuche in den vergangenen Jahren nicht zum erhofften wirtschaftlichen Erfolg geführt hatten, geriet das Unternehmen 2020 durch die Corona-Pandemie weiter in eine wirtschaftliche Schieflage. „So schade es auch ist, sich von der Sparte Objekttextilien zu verabschieden – es ist im Sinne des Unternehmens und der Perspektive für die Beschäftigten am Standort Emsdetten die richtige Entscheidung“, führt Axel Pelzer, seit Februar 2021 Geschäftsführer bei Schmitz Textiles, aus.

106 Arbeitsplätze gerettet
Weitere Voraussetzung für die Neuausrichtung sind die Reduktion der Belegschaft und Entgeltkürzungen der verbleibenden Mitarbeitenden. Dafür einigten sich Betriebsrat und Geschäftsführung auf einen Sozialplan und einen Interessenausgleich. „Das ist ein hoher Preis für die meisten Beteiligten. Aber nur so konnten wir eine Liquidation abwenden“, sagt Axel Pelzer. Man habe im Vorfeld verschiedene Szenarien geprüft und die erzielte Einigung sei der einzige Weg, eine Zukunft für Schmitz Textiles zu ermöglichen. „Die Einigung ist ein großes Entgegenkommen von beiden Seiten. Dafür möchte ich mich bei beiden Parteien bedanken. Mit der Konzentration haben wir die Chance, das Unternehmen weiterzuführen und bieten 106 Kolleginnen und Kollegen, darunter vier Auszubildenden, eine Perspektive“, ergänzt Dan Schmitz.

Doch die Arbeit, Schmitz Textiles neu aufzustellen, beginne erst jetzt, gibt Dan Schmitz zu bedenken. In den kommenden Wochen wird der Textilhersteller intensiv an der Restrukturierung arbeiten. So werden beispielsweise Kostenparameter grundlegend neugeordnet. Hinzu kommen geplante Umbaumaßnahmen, die Anpassung der Prozesse und Systeme sowie eine Neuordnung der Räumlichkeiten auf dem Betriebsgelände. Gleichzeitig geht es darum, bestehende Kundenverträge zu bedienen und die Produktion aufrecht zu erhalten. „Auch in der Phase des Umbruchs können sich unsere Kunden auf uns verlassen“, resümiert Schmitz.

• Denim ingredient ISKO and Pakistan's largest vertically integrated denim company Soorty join forces

From competition to virtuous co-opetition: ISKO and Soorty announce the signing of a technology licensing agreement which sees the two companies working in partnership on the production of fabric and garment collections. The collaboration combines ISKO’s expertise in creating best-in-class, patented technologies with Soorty’s extensive vertical production network, which will be utilized to produce the collections. This collaboration opens the door to significant, new business opportunities for both companies and will enable them to meet customers’ needs on a greater scale.

Both players judge themselves at the forefront of sustainability, inclusivity, technology and education in the industry and are driven by a shared approach that prioritizes synergy, cross-fertilization, and a quest for constant improvement.

The first collaborative effort between the companies sees the launch of the ISKO Future Face™ by Soorty collection. Created using ISKO’s innovative ISKO Future Face™ technology, it is produced by Soorty specifically for the US market. ISKO Future Face™ is a patented woven fabric that looks like a knit. This fabric innovation combines a soft, silky finish with comfort, enhanced shape retention and a flattering drape, while maintaining all the properties of true denim.