From the Sector

From mechanical engineering to the construction industry, from logistics to rescue technology – tensioning and clamping systems fulfil important tasks in a number of industries. The possible uses of technical textiles for industrial applications of this kind are manifold.

Patented and precisely configured
The ElasTool system from the elastics expert consists of a connection tool and a rubber rope connected to this tool via integrated locking elements. The stainless steel, aluminium or plastic connection tool and the rubber rope – with a thickness of between 12 and 38 mm – are each configured to fit precisely. The highlight of the patented connection solution: the more tensile force is exerted, the more the rope is jammed. Thanks to the locking system, ElasTool still provides a secure hold even when the diameter of the rubber rope narrows to up to 60 percent due to the tensile load. A crucial advantage over conventional end connections by pressing.

Economical and low maintenance
The system has further advantages: the textile solution runs quietly. Unlike clamping systems with steel cable springs, there is no creaking here. In addition, textiles, plastic and aluminium are particularly lightweight materials. ElasTool therefore saves energy. Another benefit: the connection system works without lubricating oil. While conventional tensioning and clamping solutions in industrial plants and products have to be oiled regularly, the JUMBO textile system works completely maintenance-free.

Versatile and easily interchangeable
Depending on the area of application of the ElasTool, the interchangeable head can be exchanged: Plastic hook instead of aluminium eyelet, stainless steel flange instead of aluminium hook – for example. The interchangeable head can be replaced effortlessly and without special tools.

"A lifting system in a high-bay warehouse, a trolley in a crane, damping for compressors or crash systems – these are just three of the many possible applications. We adapt the dimensions, material, force-stretch behaviour, flame retardancy – like all properties – specifically to the respective project," emphasises Carl Mrusek, Chief Sales Officer of JUMBO-Textil. "Thus, with ElasTool, we offer a safe load connection for a wide variety of applications in industry."

ElasTool from JUMBO-Textil

• Lightweight and flexible alternative to conventional tensioning and clamping systems
• Suitable even in small installation spaces
• With individual specifications and infinitely customisable dimensions
• Connection tool optionally made of plastic, aluminium or stainless steel
• Rubber rope in a thickness of 12 to 38 mm
• Rubber rope made of polyamide, polyester, recycled PES, polypropylene, aramid, Dyneema, monofilament, natural fibres
• Different interchangeable head shapes possible
• As an end connection or for coupling with other machine elements
• Tensile load up to 600 N, in individual cases more than this
• Individually configurable e.g. with hook, eyelet or flange

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Korean subsidiary SHIMA SEIKI KOREA INC., will participate in the Preview in SEOUL exhibition in Seoul, Republic of Korea this month (23rd - 25th of August 2023).

SHIMA SEIKI will show its SWG061N2 compact WHOLEGARMENT® knitting machine which can produce a wide range of WHOLEGARMENT® items in their entirety without the need for linking or sewing. The SWG-N2 series “Mini” range is suited to the production of small knit items and accessories such as gloves, socks, hats and scarves as well as cozies, shoe uppers, bags, card cases, glasses cases, smartphone covers and other personal items. The N.SVR093SP is a conventional shaped knitting machine featuring a loop presser bed that yields novel fabrics with special inlay patterns that are produced by inserting yarn into knit fabric in a weave fashion, offering new and exciting possibilities in hybrid knit-weave textiles. Both machines will be shown knitting such items as bags and sporting goods to demonstrate the capability of current knitting technology for producing non-apparel items.

SDS®-ONE APEX design system and APEXFiz® subscription-based design software will also be on display. Both support the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. Virtual samples can furthermore be used in e-commerce to gauge consumer demand before production begins. Feeding that information back to production and combined with on-demand WHOLEGARMENT® knitting technology, production can be adjusted to optimize inventory and minimize leftover waste. APEXFiz® thereby helps to realize sustainability and digitally transform the fashion supply chain.

Using recovered resin from discarded car bumpers, Autoneum’s sustainable Re-Liner technology transforms a previously unusable waste product into lightweight and durable wheelhouse outer liners. In addition to their high recycled content, the eco-friendly components require significantly less energy to produce than conventional alternatives. The innovation presents another important step towards a more sustainable circular economy and has now been nominated for the 2023 PACE Award.

Autoneum has been selected as one of the finalists for the 2023 Automotive News PACE Awards. Entering its 29th year, this prestigious award honors superior innovation, technological advancement and business performance among automotive suppliers.

Re-Liner is based on a core of polyolefins recovered from post-consumer bumpers and has a textile top layer made of fibers from recycled materials. “Autoneum has recognized the untapped potential of recovered resin from automotive bumper covers as a resource and is giving this former waste product a second life,” explained Dan Moler. “The core resin of Re-Liner is 100% automotive post-consumer recycled material, not just a filler or additive to a virgin material. Lightweight, durable, and sustainable wheelhouse outer liners based on this technology are expected to reduce waste generated by bumper covers by nearly one million kilograms in 2023.”

For more than a quarter century of a century, the PACE Award has honored innovations driven by automotive suppliers. The award is known in the global automotive industry for identifying and recognizing the latest game-changing innovation: from the plant floor to the product to the showroom. In 2000, Autoneum (then Rieter Automotive) already received a PACE Award for its Ultra-Light technology. In addition, two of the Company’s technologies have also been nominated as finalists in the past: Ultra-Silent in 2010 and Theta-Fiber in 2012.

Devan, part of Pulcra Chemicals, has announced its R-Vital NTL technology.

R-Vital NTL enables textile manufacturers to boost textiles with a versatile range of micro-encapsulated active ingredients. This functional finish provides added value for textiles and allows manufacturers to create products that differentiate them from competitors. Furthermore, the bio-based and biodegradable well-being technology achieves a durability of 50 washes.

The main concept behind micro-encapsulation is that active ingredients, present on textiles, are gradually released on the skin. When using the textiles or while wearing the clothing, the microcapsules burst by friction and release their assets. Since not all capsules break at the same time, a continuous and gradual release of the actives is obtained.

The natural range comprises five distinct products, each with specific attributes:

• Aloe vera: Known for its skin-smoothing and softening properties.
• Avocado seed oil: Known for its skin-moisturizing capabilities.
• CBD: Known for its relaxation properties.
• Multivitamin: A blend of provitamin D, vitamins C and E, and ginger.
• Vitamin E: Known to offer protection against free radicals and premature aging

adidas and Manchester United Football Club announce the extension of their partnership. Manchester United commenced a historic agreement with adidas at the start of the 2015/16 season, reuniting after 23 years.

The new deal increases the focus on the Manchester United women’s team since their reintroduction in 2018 – continuing Manchester United and adidas’ commitment to drive the women’s game forward.

Manchester United Chief Executive Officer, Richard Arnold said:  
“The relationship between Manchester United and adidas is one of the most iconic in world sport , forged through a shared commitment to style, flair and, most importantly, high performance.

“With its roots in the 1980s, our partnership has been reinvented over the past decade with some of the most innovative designs and technology in sportswear. We are now looking forward to refreshing this powerful partnership again through the remainder of this decade and into the 2030s.”  

Chief Executive Officer at adidas, Bjørn Gulden, said:  
“We are extremely proud to announce the extension of the contract with Manchester United. adidas and Manchester United are two of the most important brands in International Football and it is very natural for us to continue our cooperation. We will combine tradition and innovation to please both the players and the fans. 

Archroma, a global leader in specialty chemicals towards sustainable solutions, was highlighted for its advanced sustainable practices and innovation in Pakistan by the Swiss Embassy. Foreign Minister of Switzerland, Mr. Ignazio Cassis who was on an official state visit to Pakistan visited Archroma Center of Excellence at Karachi on 9 July 2023 along with high-level officials and three Members of Swiss Parliament.

Mr. Ignazio Cassis was greeted by Archroma employees at the Archroma Center of Excellence. He inaugurated the company’s "Wall of Pride", an impressive collection of recognitions, accolades and honors earned by Archroma in Pakistan since the company’s inception in October 2013.

Mr. Cassis visited the Research & Technology (R&T), Application, Analytical Laboratories & Training Academy spread on three floors at the Archroma Center of Excellence and saw the developmental work in progress. He was shown printing of multi-colored fabrics along with research based developmental analysis in the laboratories.

The globally acclaimed ‘Zero Liquid Discharge Sustainable Effluent Treatment Plant’ and the aniline-free* indigo produced at Jamshoro were the two of the main highlights showcased as best-in-class sustainable practices in the industry. Presentations and discussions were held on continued enhancement of these landmarks with the local industry.

• Sales up 1.9% year-on-year to €560.5 million with stable adjusted EBITDA of €88.0 million
• Strong business performance of the Graphite Solutions, Process Technology and Composite Solutions businesses
• Sales and earnings decline at Carbon Fibers due to weakness of wind market
• Impairment at Carbon Fibers of €44.7 million

Despite the increasingly difficult economic environment, SGL Carbon was able to increase sales in H1 2023 from €549.8 million in the previous year to €560.5 million. Adjusted EBITDA (EBITDApre) remained almost unchanged at €88.0 million (H1 2022: €87.9 million). The expected good business performance of the Graphite Solutions business unit and the better-than-expected sales and earnings development of Process Technology and Composite Solutions compensated the drop in demand in Carbon Fibers.

In particular, the Graphite Solutions (GS) business unit contributed to the stable development of the Company with a 15.3% increase in sales to €280.6 million (H1 2022: €243.4 million) and a 20.6% improvement in adjusted EBITDA to €65.1 million (H1 2022: €54.0 million). GS benefited especially from the high demand of the semiconductor industry. The semiconductor and LED market segment now accounts for around 45% of GS revenue (H1 2022: around 35%).

With a 30.9% increase in sales to €64.4 million (H1 2022: €49.2 million) and a significant rise in adjusted EBITDA from €4.1 million to €11.9 million, the business performance of Process Technology (PT) was significantly above the original planning. Composite Solutions (CS) also reported a higher-than-forecast sales increase of 14.4% to €79.6 million in H1 2023 (H1 2022: €69.6 million) and an improvement in adjusted EBITDA of 26.8% to €12.3 million (H1 2022: €9.7 million). By contrast, the business performance of the Carbon Fibers (CF) unit was not in line with expectations, with a 28.9% decline in sales to €125.1 million (H1 2022: €176.0 million) and a 78.4% drop in earnings to €6.1 million (H1 2022: €28.2 million).

An important market segment for the Carbon Fibers business unit is the wind industry. Demand for carbon fibers for the wind industry has declined sharply since the beginning of the year. According to current estimates, the expected recovery in demand in H2 2023 will not materialize. SGL Carbon expects customer demand from the wind industry to pick up in 2024.

As already announced in the ad hoc release of July 24, 2023, an impairment loss of €44.7 million was recognized on the assets of Carbon Fibers as of June 30, 2023.

Results situation
SGL Carbon's adjusted EBITDA (EBITDApre) remained almost stable in a half-year comparison at €88.0 million (H1 2022: €87.9 million). Due to the lack of demand from wind industry, CF's production capacity utilization decreased and idle capacity costs weighed on adjusted EBITDA. By contrast, higher margins from product mix and volume effects in the other three business units had a positive impact on adjusted EBITDA.

Non-recurring items and one-off effects not included in adjusted EBITDA totaled minus €46.9 million in the first half of 2023, of which €44.7 million resulted from an impairment loss in the CF business unit.

In addition to the above-mentioned effects and nearly unchanged depreciation and amortization of €29.1 million (H1 2022: €28.9 million), the decline in EBIT resulted in particular from the impairment loss already described (€44.7 million). After €69.6 million in H1 2022, EBIT amounted to €12.0 million in the reporting period.

Taking into account the slightly improved financial result of minus €15.8 million (H1 2022: minus €16.6 million), consolidated net income for the first six months of the current financial year amounted to minus €10.0 million, compared to €48.8 million in the first half of the previous year.

Net financial debt and equity
To complete its refinancing, SGL Carbon issued convertible bonds with a volume of €118.7 million in June 2023 and drew an existing term loan facility of €75 million in July 2023, which was used together with cash of the Company on July 28, 2023 to repay the corporate bond (outstanding as of June 30, 2023: €237.4 million). Accordingly, cash and cash equivalents increased to €310.5 million as of June 30, 2023 (€227.3 million as of December 31, 2022) and financial debt temporarily increased to €480.4 million (€398.1 million as of December 31, 2022). Net financial debt remained nearly unchanged at €169.9 million as of June 30, 2023 (Dec. 31, 2022: € 170.8 million).

Despite the impairment loss of €44.7 million in Carbon Fibers, shareholders' equity amounted to €565.2 million as of June 30, 2023, only slightly lower than at the end of 2022 (Dec. 31, 2022: €569.3 million). This corresponds to an equity ratio of 36.1% (Dec. 31, 2022: 38.5%).

PrimaLoft, Inc., a leader in advanced material technology, is expanding its  Active Insulation Range by adding four new Active Evolve styles, reaffirming its commitment to providing cutting-edge solutions that meet the evolving needs of consumers.

Originally launched in 2018, PrimaLoft Active Evolve is a line of insulating fabrics that is designed to evolve performance, design, and sustainability. Combining the lightweight warmth of insulation with the breathability of fabric, this technology is developed to perform in a wide range of activities, regardless of intensity or season. From pushing yourself during a cross country ski tour, to working up a sweat hiking to the next peak, PrimaLoft Active Evolve keeps you in your comfort zone – even when you’re pushing yourself out of it.

Several products in the Active Evolve line can be used as a next-to-skin fabric. This enables brands to forego liner fabrics, which means heat and moisture are more efficiently managed, breathability is supported, and user comfort is maintained. In addition to achieving optimal performance during aerobic activity, this yields a wider utility and year-round use, all while allowing brands to use less overall material when designing a garment, reducing footprint and waste.

PrimaLoft Active Evolve offers several advantages to designers. It enables them to utilize the full spectrum of color, incorporate unique patterns, and provides greater flexibility in fabric selection. Additionally, Active Evolve eliminates the need for quilting in the design process. Products within the Active Evolve line are made from up to 100% post-consumer recycled content, including three of the four new styles.

With more than a dozen brand adoptions thus far, PrimaLoft Active Evolve’s adaptability for the user, range of use across activities, and seasonal timing, is quickly making this one of the most versatile products in the PrimaLoft portfolio. For Fall/Winter 2023-2024, key partner brands beside Sitka and Löffler will include CP Company, Eddie Bauer, Endura, Martini Sportswear, OMM, Quiksilver, Ziener and more.

Riri, which became part of Oerlikon Group on March 1, presents its FW 24-25 collection, which embraces plastic and metal trends.

Metal Trends: GALACTIC SHINE, TEXTURIZED BLACK and AMBER GLAZE
As a result of joining the Oerlikon Group, specializing in surface engineering, polymer processing, and additive manufacturing, Riri is accelerating its transition to new processes related to surface treatments, particularly the PVD (Physical Vapour Deposition) technology, a physical process that significantly reduces impacts on the environment. PVD processes can be appreciated particularly on sliders and buttons where gold and shiny black finishes stand out. Silver textures, science fiction-inspired surfaces and shapes, and glossy, brushed finishes in shades of gray and very light gold: GALACTIC SHINE brings to earth a sidereal experience, witness from a journey where the atmosphere becomes rarefied and elegance takes shape among metalized leather tapes, gold PVD pullers, organic cotton, and gleaming inox. Black also shines in the TEXTURIZED BLACK selection, in tone-on-tone contrasts that create plays of light and shadow, thanks to metallic effects, glossy black PVD treatments, tapes and galvanic in shades of black. The atmosphere becomes warmer by varying on amber tones, the absolute protagonists of the AMBER GLAZE mood, which offers a different interpretation of elegance through bright amber tones, rose gold, diamond prints and geometric patterns.

Plastic Trends: GHOSTLY ICE and SPRAY VANISHED
GHOSTLY ICE features accessories that refer to the skiing theme, offering an algid beauty made up of transparent surfaces and icy effects, a theme in which the sustainability of mono-materials coexists with the elegance of the end result. The color inspirations are totally different, but sustainability and elegance remain unchanged in the SPRAY VANISHED zipper selection, in which vibrant multicolored effects communicate joy and vitality through iridescent PVD effects and the use of recycled materials, such as the polyamide of the patented B.Lock button.

According to preliminary figures for H1 2023, SGL Carbon's Group sales increased year-on-year from €549.8 million to €560.5 million, with EBITDApre¹ almost unchanged at €88.0 million (H1 2022: €87.9 million). The expected good business performance of the Business Unit Graphite Solutions and the better-than-expected sales and earnings development of the segments Process Technology and Composite Solutions compensated the drop in demand in the Business Unit Carbon Fibers.

Graphite Solutions (GS) increased sales by 15.3% year-on-year to €280.6 million and EBITDApre by 20.6% to €65.1 million. With a 30.9% rise in sales (€64.4 million) and a significant improvement in EBITDApre from €4.1 million to €11.9 million, the business performance of Process Technology (PT) was significantly ahead of the original budget. Composite Solutions (CS) also reported a higher-than-expected sales increase of 14.4% to €79.6 million in H1 2023 and an increase in EBITDApre of 26.8% to €12.3 million compared to H1 last year. By contrast, the business performance of the Carbon Fibers (CF) unit was not in line with expectations, with a 28.9% decline in sales to €125.1 million and an EBITDApre contribution of €6.1 million (-78.4% compared to the 1st half of the previous year).

An important market segment of the Carbon Fibers Business Unit is the wind industry. Demand for carbon fibers for the wind industry has declined sharply since the beginning of the year. According to current estimates, the expected recovery in demand in H2 2023 will not materialize for the time being. SGL Carbon expects customer demand from the wind industry to pick up in 2024.

Based on this, an impairment loss of between €40-50 million will be recognized on the assets of the Carbon Fibers Business Unit as of June 30, 2023. The impairment relates exclusively to Carbon Fibers, the operating business of the other Business Units is not affected.

SGL Carbon's equity ratio after the impairment as of June 30, 2023 is approximately 36% (December 31, 2022: 38.5%).

Further information on the first six months of fiscal year 2023 can be obtained from the half-year report, which will be published on August 3, 2023.

¹The definition of key figures used in this release is aligned to the Annual Report 2022.