From the Sector

During the conference it was very interesting to see how the Chinese recycling industry in general and the Chinese polyester recycling industry in detail is on its way to digest the drastic measures of the Chinese government to ban the import of any plastic waste from January first, 2018 onward.

While Europe is struggling with individual measures such as the ban on drinking tubes, cotton swabs, balloons, plastic bags or disposable tableware, the Chinese leadership has created eight ministerial administrative units covering the entire complex of environmental protection, renewable energies, circular economy including recycling and climate protection. There is still a substantial gap to European environmental standards but Chinese velocity of progress is impressive in this field.

More than 360 delegates form China and oversees listened to the latest results in polyester recycling technology, production and market and exchanged their recent experiences. Especially the exhibition was core of social and technical networking.

Two contributions from governmental organizations and three from industry associations are underlining the high administrative attention of the recycling issue and loop economy in general.

STAMFORD, Conn. – At this year’s CAMX conference, taking place on September 24-26 in Anaheim, CA (Booth L42), Hexcel will promote its broad portfolio of composite innovations for aerospace and industrial applications.

On display at the Hexcel booth, visitors will see an integrated wing panel demonstrator made with HiMax™ non-crimp reinforcements that were specially developed to complement a new generation of infusion resin systems. Visitors will also see a wing box demonstrator made from HiTape® dry carbon reinforcements. Both parts were injected with Hexcel’s RTM6 infusion resin and incorporate a toughening veil to enhance mechanical properties to meet the structural requirements for aerospace parts.

With 50 years of experience and the most qualified carbon fiber positions on aerospace programs in the industry with its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing a new fiber to its portfolio. HexTow® HM54 combines high modulus and high tensile strength, which allows structural designers to achieve higher safety margins for both stiffness and strength-critical applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications, examples of golfing applications will be on display.

Additive manufacturing is on the forefront of innovation for composite technologies, and Hexcel is leading the way with its HexAM® additive manufacturing process. HexAM® additive manufacturing combines high performance PEKK thermoplastics with carbon fiber to produce flight-ready 3D printed HexPEKK® parts. HexPEKK® structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts in highly demanding aerospace, satellite and defense applications.

HexPly® M77 snap-cure prepregs are yet another example of Hexcel technology leading the way. HexPly® M77HF, the latest member of this quick-curing prepreg family, is revolutionizing the world of composites for high-performance sporting goods with its faster production times and excellent surface quality. It will be featured in the Hexcel booth in two products – a carbon fiber Goode water ski which is setting records in the competitive world with its precision and durability, and in a HED cycling wheel noted for its aerodynamics and light weight.

Among Hexcel’s latest technologies are the RF Interference Control materials made by ARC Technologies, a Hexcel company. A selection of these industry-leading custom RF / EMI and microwave absorbing composite materials for military, aerospace and industrial applications will be on display at the Hexcel booth.

HexForce® bias weave woven reinforcements are a patented solution to optimize material usage. These bias weave reinforcements are continuous rolls of carbon fiber fabric in which the warp and weft yarns are oriented on the bias at +/- 45° which can reduce prepreg waste up to 60%. Visitors at CAMX will be able to see this new woven reinforcement and learn more.

Heimtextil will launch the new 2020/2021 trend season with the general theme “WHERE I BELONG”. For the official Heimtextil Trend Preview, Stijlinstituut Amsterdam director Anne Marie Commandeur  introduced the new design themes. The presentation in the run-up to Heimtextil (7-10 January 2020) took place at the Textile Museum’s Textile Lab in Tilburg, the Netherlands on 11 September 2019 and was streamed worldwide.

This season, Stijlinstituut Amsterdam is responsible for the Trend Book content and Trend Space implementation at the upcoming international trade fair for home and contract textiles. Alongside Stijlinstituut Amsterdam, London-based studio FranklinTill and Danish agency SPOTT trends & business contributed to the 20/21 global forecast for perspective-related interior design. Together with the Heimtextil management team, these Trend Council participants gave insights into future styles during a workshop.

At the annual international Trend Council workshop, identity was an ever-present topic: part of a broader discussion on gender and cultural diversity, on tolerance and curiosity. Today, the self-identification process seems more complex than ever. Identities are now formed through experiences that take place simultaneously, on different levels. Locally, nationally, globally, both online and offline. Identity therefore can consist of many different layers. In fact, individuals can all have multilayered identities.

Heimtextil Trends 20/21 Overview:

MAXIMUM GLAM

Pleasure seekers revel in layering theatrical influences and glamorous showtime aesthetics, forging a fantastic marriage between the crafted and digitally rendered. Textiles show a ‘more is more’ attitude through a mash-up of glam, gradients and spectrums, fake fur, pile and fringe, jacquard weaves and fantastic prints. The flashy, kitsch colour range becomes brutally glam thanks to electric sheen, synthetic shimmer, digital glitch and artful blur. A riot of clashes and rebellion.

PURE SPIRITUAL

Idealists seek perfection and purity, restoring equilibrium by connecting with the uber-natural. They embrace technology for good while shifting between realism and mysticism in pursuit of a personal haven. To address a renewed bond with nature, organic matter, raw materials and pure textiles are selected which show nature’s traces, organic structures and irregularities. Shades are created from the earth and cultured by man. An elemental and pure range reflects the source of their existence.

ACTIVE URBAN

Urban dwellers confront the challenges of the fast paced, shape-shifting, man-made environment by searching for utilitarian, adaptable solutions. They value tech performance while making smart use of  available and renewable resources. Functionality is prioritised, while looking cool and working well remains key. Interior/sportswear hybrid textiles show smooth surfaces and a fun mash-up of graphic textures. The palette shows uniform blue, asphalt grey and caterpillar yellow.

HERITAGE LUX

Preservers of historic legacies treasure sensuousness alongside the uncanny, enlightenment together with darkness, for a whole new immersive experience. This new narrative translates to a love for luxury and splendour, decoration and embellishment. Finding beauty in history and nature through ornamental patterning and alluring surface enhancement. Reflecting on ancient history results in a palette featuring enigmatic blood red, sapphire and a lustrous mother-of-pearl.

MULTI-LOCAL

Hyper-locals go global, celebrating inclusivity over appropriation, honouring traditional craftsmanship and adjusting the world’s gaze to embrace exchange, creative integrity and diverse identities. Indigenous style meets global influences. This is a celebration of crafted and decorative pattern, from tribal and folkloric to geometric and abstract. Textile colours become part of a wider cultural narrative, linked to local community, cultural heritage and private identity.

You can find more Information here

At CAMX Expo, Chomarat is showcasing its range of carbon reinforcements, including live demos: a rocket fairing mold, a kayak paddle and a flat panel will be on display in the demonstration area of Composites One, a partner of Chomarat. The Chomarat carbon range is also available in the USA through Composites One’s distribution network.

DEMONSTRATING THE UNIQUE PROPERTIES OF CHOMARAT’S REINFORCEMENTS
For the rocket fairing mold, the kayak paddle and the flat panel applications, Chomarat’s C-WeaveTM carbon reinforcement offers a unique and excellent visual appearance and structural performance at the same time. “In addition to C-WeaveTM, the kayak paddle comprises another reinforcement: G-flowTM, the 2-in-1 reinforcement for infusion to strengthen the vacuum-flow,” explains Travis Irvin, Sales Manager and Closed Mould Process Expert at Chomarat.

Other live demos of skateboards will demonstrate the potential for high-volume production with RovicoreTM, the famous glass sandwich reinforcement created by Chomarat. ”RovicoreTM is always at the forefront of technology for LRTM process,” he adds.

Moreover, Chomarat is displaying a motorcycle helmet with exposed carbon and a very light kayak paddle, highlighting the properties of C-WeaveTM. A tennis racket using C-PLYTM will also be displayed at the show.

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”

15th China International Recycled Polyester Conference & Exhibition is to be held in China during 18-20 Sep 2019. The forum is jointly organized by Dr. Thiele Polyester Technology and China Chemical & Fiber Economic Information Network (CCFEI), and supported by Recycled Fiber Commission of China Chemical Fiber Association and China National Chemical Fiber Corp.

Having achieved successes during the past 14 years, our China International Recycled Polyester Conference has developed to be the largest international conference of recycled polyester industry in Asian-pacific region. The upcoming 15th China International Recycled Polyester Conference & Exhibition will again gather domestic and overseas raw material suppliers, recycled fiber (regular, hollow and filament) makers, machinery suppliers, downstream consumers, as well as related medium, industry associations and traders, to share valuable opinions of market status quo and perspective.

STAMFORD, Conn. – At this year's Paris Airshow [Le Bourget, June 17-23] Hexcel will promote a range of carbon fibers and composite materials used to manufacture high-performance weight-saving structures in civil aircraft, engines, helicopters, and space applications.

Visitors to the Hexcel stand will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® carbon fiber reinforcements. HiTape® dry carbon reinforcements were developed for the automated lay-up of preforms and to complement a new generation of HiFlow™ resin systems, producing high-quality aerospace structures using the resin infusion process. The reinforcements incorporate a toughening veil to enhance mechanical properties and meet the structural requirements for aerospace parts. The I-Beam was manufactured using C-RTM (Compression Resin Transfer Molding) and was injected with Hexcel’s RTM6 resin in a process taking less than five minutes.

Hexcel honeycomb saves weight and enhances stiffness in composite structures, and the company provides a range of engineered core solutions that enable highly contoured parts with precision profiling to be produced to exact customer specifications. A sample part made from aluminum FlexCore® that is CNC machined on both sides and formed and stabilized with both peel ply and flyaway layers of stabilization will be on display.

Another honeycomb innovation is Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.
Another Hexcel technology to benefit aircraft engines is HexShield™ honeycomb which provides high-temperature resistance in nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential reuse of material after a fire.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

Another area of expertise that uses HexTow® carbon fiber is additive manufacturing, where Hexcel uses PEKK ultrahigh performance polymers and HexAM™ technology to manufacture carbon reinforced 3D printed parts. This innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Later this year Hexcel will open a joint research and development laboratory in Les Avenières (Isère), France with Arkema to develop carbon fiber-reinforced thermoplastic prepreg tapes for aerospace, space and defense applications. A spool of thermoplastic prepreg tape will be on display on Hexcel’s stand to showcase this cost-effective technology that enables lightweight parts to be produced in faster production cycles for future generations of aircraft.

Hexcel’s stand is located next to Hexcel’s official distributor for aerospace products, Groupe Gazechim Composites. In 2018, Hexcel and Gazechim formed a joint venture, HexCut Services, to provide aerospace and defense customers with customized kitting services that include Hexcel’s innovative carbon fiber prepreg, fabrics and adhesives. Pre-cut kits save customers time and investment, reduce inventory and minimize material losses through scrap reduction.

Huntsman Textile Effects will be highlighting its HIGH IQ® intelligent effects and Durable Water Repellency technology at the upcoming OutDoor Retailer Summer 2019 show in Denver, Colorado.

As the industry leader in innovative and environmentally sustainable textile solutions, Huntsman Textile Effects offers mills and brands a comprehensive suite of intelligent effects through its HIGH IQ® performance assurance program. With a wealth of textile industry knowledge and experience, Huntsman Textile Effects helps mills around the world achieve greater productivity and efficiency.

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

Parts prediction
In addition, the digital twin system provides information on the individual wear parts of a system, such as, for example, converters or gears. “Operators and mill managers are informed by Smart Check sensors when maintenance or the replacement of key components will be required, well ahead of time,” explains Monforts Vice President Klaus A. Heinrichs. “Direct access to the integrated Monforts webshop allows users to instantly order such parts when they are needed, virtually preventing machine downtime.” On request, Monforts can also virtually monitor machine performance and pro-actively alert customers to the need for preventative action. In such cases, however, data is only ever called from the cloud by Monforts when customers have given their full consent, in the interests of data security. Data from Smart Check, for example, can even be used to analyse a system’s energy requirements, allowing machine operation to be optimised by tailoring production runs to the peaks and troughs of electricity costs.

Two successful events made in Bangladesh where fashion and innovation have, once more, come together to champion change and foster sustainability.

Bangladesh has a mission: to fetch its share in the global 130 billion dollars market of smart apparel by 2025. To reach this goal, the country aims to foster modern, innovative, technology-driven apparel manufacturing and to constantly engage in supply chain conversations.

A fitting stage for these conversations was the 2nd Bangladesh Fashionology Summit that took place on day 1 of the Bangladesh Denim Expo – held on 02-03 May 2019 at the International Convention City Bashundhara. This was a platform for thinkers, innovators, experts, educators to share innovative ideas on this edition’s main theme: “Digitalization – the Next Destination”. Sessions were provided to learn more on how innovation, specifically digitalization, fits in the world of the fashion industry.

Further to an increase in cost of production, the industry is even more compelled to focusing on finding added value for products. Here is where the smart clothing market comes in, an opportunity on which a thriving community of thinkers will commit to lead the “current-generation” garment production into the “next-generation” apparel manufacturing by using latest digital technology.

The Summit has also provided a Tech Innovation Zone (Tech Innovators: Trustrace, Shimmy Technologies, Infinited Fiber, Seachange Technologies, Reverse Resource) in collaboration with Fashion For Good, a platform for innovators to meet with the other components of the eco system, and an Exhibition Zone (Exhibitors: Pivot88, Lectra, Sindabad.com, Pacific Associates, Earlycavehuman, Foursource Group GmbH, A2i-Access to Information, GoBlu, Rudholm Group, QuizRR, BRAC, SNV, SR Asia, Swiss Contact) for companies to showcase their latest innovations, paying special attention to information sharing.