From the Sector

The next AACHEN-DRESDEN-DENKENDORF INTERNATIONAL TEXTILE CONFERENCE will take place on November 21/22 2024 in Stuttgart on site.  

You are invited to submit abstracts for oral or poster presentations related to the following topics:

• Textile Mechanical Engineering
• Biobased Fibers
• High Performance Fibers
• Fiber Composites and Lightweight Construction
• Circular Economy and Recycling
• Medicine and Health
• Functionalization and Finishing
• Transfer Session “From Idea to Practice”

 
Deadline abstract submission for oral presentations: April 30, 2024
Deadline abstract submission for poster presentations: September 30, 2024

Partner countries for 2024 are Belgium, Netherlands and Luxembourg.

Toros Greenhalgh becomes General Manager of the new KARL MAYER subsidiary in Türkiye

In October 2023, the KARL MAYER GROUP established its own site in Bursa, Türkiye, thus increasing its presence in one of its most important markets. KARL MAYER TURKEY will meet increasing customer demands for after-sales service, spare parts (Care Solutions), and academy, in the sectors of warp knitting and warp preparation, while KARL MAYER’s long-standing regional representative ERKO focuses on machine sales.

Toros Greenhalgh was appointed General Manager of KARL MAYER TURKEY on February 1st of this year. Holding a degree in mechanical engineering and materials science from the University of Birmingham, he comes with experience in the fields of industrial plant construction management, renewable energy technologies, and the distribution of medical devices. For the past seven years he has been active in the sector of textile machinery through ERKO with particular focus on KARL MAYER machine sales, service, and spare parts.

Together with the German circular knitting machine builder Mayer & Cie., Groz-Beckert has developed the optimized Relanit sinker SNK F over the past years. Independently of this, the development of the new LCmax™ energy-saving needles took place. The focus of both developments is on efficiency, energy savings and increased process reliability.

Groz-Beckert offers interested machine builders different cooperation options to jointly develop new products or optimize existing ones. The Groz-Beckert Technology and Development Center (TEZ) provides the appropriate framework for so-called co-development projects. At the ITMA in Milan in June 2023, Groz-Beckert presented some of the successful cooperations under the motto "Innovation through cooperation". Among them were two new developments realized with Mayer & Cie. Groz-Beckert presented the two new products for the first time in Asia at ITMA Asia in November 2023.

Optimized Relanit sinker SNK F
At the end of 2018, circular knitting machine manufacturer Mayer & Cie. approached Groz-Beckert with a request to jointly develop an improved and more efficient sinker for selected machines of their Relanit family that would run more smoothly and reliably in the needle tricks. The innovative sinker has an integral spring with a spring force that is adapted to the sinker thickness. Field tests were consistently successful and confirmed the functionality and advantages of the new sinker.

Thanks to their adapted spring, the newly developed SNK F Relanit sinkers are securely guided while they are running through the cam track, resulting in a quieter operation. This increases process reliability and ensures an improved loop structure. In addition, wear on the swivel butts of the sinkers is reduced. This increases service life and makes the process more sustainable and cost-efficient.

Higher energy efficiency thanks to LCmax™
The objective second recent cooperation with Mayer & Cie. was to develop a cost-effective energy-saving needle. After considering various variants, the common choice of Mayer & Cie. and Groz-Beckert was the LCmax™ knitting machine needle with innovative, wave-shaped shank geometry. The first prototypes were extensively tested on laboratory machines at Groz-Beckert's TEZ.

The wave-shaped shank of the LCmax™ needle ensures a smaller contact area of the needle in the needle trick. This results in less friction, which reduces machine temperature and enables energy savings of up to 20 percent compared to a standard needle. This saves costs and at the same time allows operation of the machine at the maximum possible speed.

In both projects, the cooperation between Mayer & Cie. and Groz-Beckert went far beyond mere product development. In addition to Applications Engineering and Construction, the companies' Sales and Purchasing departments were also involved in a close exchange.

TRÜTZSCHLER Spinning presents an innovation for the textile machinery market: the high-performance comber TCO 21XL with 12 combing heads. For many decades, eight combing heads has been considered state-of-the-art in the spinning industry. Now, Trützschler’s advanced technology and engineering proves that it is possible to build a heavy-duty comber that maximizes productivity by 50 % and saves space without compromising on quality.

They say two heads are better than one, so just imagine what 12 heads can do! That’s the simple but effective idea behind the TCO 21XL. Increasing the number of combing heads by 50 % makes it possible to increase productivity by 50 %, enabling rates of up to 150 kg/h. As a result, two TCO 21XL combers offer the same production capacity as three conventional combers. And that means companies that buy and operate two machines instead of three can achieve significant benefits in terms of their price-performance-ratio (cost/kg). The costs of running the machines are broken down into 12 instead of eight heads, making the machine more cost-effective over its entire operating life.

50 % higher productivity is great – and it can be even greater if the machine is operated with JUMBO cans. The can changer needs to keep up with the extra performance, and JUMBO cans can easily collect the additional output of the TCO 21XL because they feature a 1200 mm diameter. This makes it possible to minimize non-productive time when changing cans. Anybody who is planning a new spinning mill knows that every square meter of space adds to the overall costs. The new TCO 21XL comber offers huge benefits in this regard because 25 % less floor space is required to operate same number of combing heads. This reduces the initial building costs, while also decreasing operating costs related to lighting, air conditioning and other overheads.

The EU's planned ban on the entire group of per- and polyfluoroalkyl substances (PFAS) would endanger many industrial processes, states VDMA Textile Machinery. Textile manufacturing would be affected twice – by missing important chemicals for technical textile production and by the lack of indispensable textile machine components. The latter would affect the whole supply chain from textile machinery manufacturers and its suppliers to the textile industry in the EU.

Solid PFAS parts are widely used in textile machinery production, especially where extreme conditions prevail. Verena Thies, Managing Shareholder Thies GmbH & Co. KG, explains: “Our textile dyeing machines are world leaders and set standards in efficiency and sustainability. They work under pressure at temperatures of up to 140° C using highly acidic, highly basic and/or oxidative or even reductive chemicals. This is precisely why PFAS is needed, for example, in seals and rings, flaps as well as valves for a long-lasting and high-quality machine concept – because there are no alternatives with qualitatively equivalent properties. In addition, PTFE semi-finished products enable a sliding and gentle contact with the textile fabric in ecologically important techniques in the transformation of textile wet finishing."

PTFE and also FKM are fluoropolymers (fluoroplastics and fluoroelastomers), a group within the broad PFAS range of about 10,000 substances which would be banned for production, use and sale in the EU. They are high-tech materials, and as so-called "polymers of low concern" are not a danger to the environment, according to the OECD. Furthermore, these components are installed inside a machine and exchanged or disposed of properly. PFAS such as PTFE and FKM must be exempted from the ban, demands the VDMA in its position paper.

"In this way, the association also supports the approach taken in Great Britain. With the 10,000 substances, everything is lumped together, although the various PFAS groups are very different," warns Dr Sarah Brückner, Head of VDMA Environmental Affairs and Sustainability. "We should take our cue from the UK and look at the substance groups in a differentiated way."
Apart from several types of dyeing machines, PFAS components are indispensable in textile drying machines (e.g., conveyor dryers, tumblers and stenters) and damping machines. They are also used in fully automatic chemical dispensing systems and pressure vessels for thermochemical treatment of textile recycling material, heat recovery systems and wastewater treatment technology. This means that a lot of machines needed for a sustainable textile production would be affected by the PFAS ban.

VDMA Textile Machinery will take part in the ongoing EU public consultation. The association will describe indispensable key functionalities and conditions of use in the textile machinery sector as well as the consequences for the companies and the customers in the EU if the ban is imposed. The consultation ends on September 25, 2023, and VDMA urged its members affected by the planned restriction to participate in the consultation at an early stage. This is the only way to ensure that the broad scope of the mechanical and plant engineering sector is represented.

Candour Techtex, a Melegaon JR Group company, is satisfied with the latest coating and lamination line supplied by UK’s Amba Projex and has ordered a second, wider one to meet increasing demand.

Based in High Peak near Manchester, BTMA member Amba Projex has over 40 years’ experience in the design and manufacture of special purpose technical textile machines, with coating and laminating installations around the world.

Amba will be working closely with Candour over the next five years, to establish an Indian technical textiles powerhouse capitalising on the UK technology provider’s long experience in the field.

Formerly Chandni Textiles Engineering Industries, Candour Techtex of the Malegaon JR Group assumed its new name in 2022 to reflect its focus on a wide range of technical textiles at its new plant in Malegaon in the Nashik District of Maharashtra.

The company was founded in 1986 and at its existing plant in Ankleshwar, Gujarat, produces an annual 1.2 million metres of light velvet fabrics mainly for the domestic market for apparel and light home furnishings. In 2020 it also began operations at a plastic moulded components division in Gonde, Nashik, with a capacity of 4,500 tons per annum.

Blackout fabrics
In particular, the new Amba Projex system enables blackout fabrics to be produced efficiently and at scale.

Blackout fabrics are installed in rooms where complete light shielding is required, such as in public institutions like hospitals, and retirement homes, in hotels and conference rooms, and also in the home, especially in bedrooms.

They obtain their light impermeability by a special three-layer blackout coating which works on textiles of all colours. Only the middle layer of the three coatings needs to be black for obtaining the necessary light absorption. The fabrics are usually also treated for permanent flame-retardancy, and also with water or stain-repellent finishes. In addition to locking out light and providing maximum privacy, blackout curtains also help to insulate a home and reduce energy costs, in addition to protecting furniture and carpets from fading due to sunlight exposure.

The 11^th edition of India ITME 2022, a textile engineering and technology B2B Exhibition, was hosted in IEML, Greater Noida, U.P. under participation from 68 countries. It showcased more than 1600  Live machinery and unveiled 69 new products.

After a gap of six years, the event recorded a high flow of quality visitors - approx. 87,400 unique visitors - which included industry members, technocrats, academicians, students and government officials apart from the delegations from 13 countries lead by senior officials of respective country who are looking to engage with India as sourcing and trade partner for developing their textile industry.

The high-profile technology & engineering exhibition for textiles witnessed participation from leading Indian institutes for textile engineering such as VJTI Mumbai, DKTE Ichalkaranji where MOU’s were signed for knowledge exchange with Swiss Textile Machinery Association and Italian Textile Machinery Association, paving way for collaboration not only in business but also in technical education.

The six-day event carried forward its theme “Empowering Textile Through Technology” encouraging indigenously developed innovations and research by Indian companies.

The six-day event set the foundation for upgradation and modernization of the textile industry of India which is the 2nd largest employment generation sector after agriculture.

• Formula 1 cars will be cheaper in future

Carbon is the stuff Formula 1 cars are made of, at least the bodywork. But until now, carbon has been expensive. It can be produced more cheaply and efficiently if artificial intelligence monitors the production processes. A camera system combined with artificial intelligence automatically detects defects in the production of carbon fibres. This makes expensive manual inspection of the carbon fibres obsolete and the production price of the carbon fibre can be reduced in the long term.

For this idea, the young engineer Deniz Sinan Yesilyurt received the second prize of the "Digitalisation in Mechanical Engineering" Young Talent Award on 6 December.

Carbon fibres are sought after because of their good properties. They are very light - they weigh up to 50 percent less than aluminium. The combination of low weight and good mechanical properties offers many advantages. Especially in times of the energy transition, lightweight materials like carbon are more relevant than ever before. At the same time, carbon fibres are as resistant to external stresses as metals. However, achieving these good properties of carbon fibres is very complex.

Up to 300 individual fibre strands - bundles of individual fibres - have to be monitored simultaneously during production. If carbon fibres tear, it costs time and money to sort out the damaged fibres. This is just one example of various defects that can occur in the fibres during production.

Therefore, Deniz Sinan Yesilyurt attached a camera to the carbon fibre line that takes pictures of various fibre defects during production and collects them in a database. The artificial intelligence in the camera's information technology system evaluates the fibre defects by assigning the images to predefined reference defects. In doing so, it recognises various fibre defects with a classification accuracy of 99 per cent. The process can also be used in other areas that produce chemical fibres.

Deniz Sinan Yesilyurt received the prize from the German Engineering Federation (VDMA) in Frankfurt am Main, Germany. He is a Bachelor's graduate at the Institut für Textiltechnik (ITA) of RWTH Aachen University. The full title of his bachelor's thesis is: "Development of a Kl-supported process monitoring using machine learning to detect fibre damage in the stabilisation process". The VDMA awarded the prize to a total of four theses from different universities. The prize is awarded for outstanding theses and was offered in Germany, Austria and Switzerland.

BTMA member Sellers Textile Engineers is marking its 110th anniversary this year with the introduction of a new concept in carpet shearing, as the essential final step in ensuring tuft uniformity and ‘just new’ freshness in finished carpet rolls.

The company has for many years offered two options in the construction of its shearing cylinders – the first, namely the ‘strap-on’, incorporates spiral blades bolted to the cylinder body and the second, known as the ‘caulked-in’, includes spirals which are fixed very securely in a machined groove within the machine.

The new Sellers’ Hybrid Shearing Cylinder combines the benefits of both, resulting in an improved cut and finer finish, in addition to longer repeatable finishing and increased rigidity.

“The Hybrid Shearing Cylinder has all the advantages of the ‘strap-on’ spiral blade to provide a sharper and cleaner cut, along with enhanced rigidity which significantly lengthens the intervals between the necessary regrinding of the blade,” explains Sellers Director Neil Miller. “We currently have six Hybrid Shearing Cylinders operating in the field and the earliest, which has been installed in both No1 Head position, where the majority of the shearing operation and heaviest cut is performed, and also in No3 Head, where the sharper cutting angle has resulted in a much improved surface quality.”

Sellers shearing machines have led the field in carpet finishing for many decades, enabling the leading manufacturers to stay competitive by enabling the highest quality of finish to be achieved economically and efficiently.

The latest advanced features of these machines include a load cell tension control drive system, an automated touchscreen for easy operator control and fault diagnosis, an enhanced cleaning system including cylinder and blade separation and fully controllable pivoting beds. Further options include thickness monitoring, seam detection and metal detection systems.

“The Hybrid Shearing Cylinder will become standard on our latest machines and also be made available for retrofitting, to provide significant benefits to our existing users,” says Miller. “All of our equipment is designed, manufactured, assembled and tested at our plant in the UK, and as one of the few remaining European engineering companies to make all of our components in-house – with now over a century of accumulated know-how – flexibility in design allows our finishing solutions to be targeted to specific customers and their product requirements. Aligned to this is a lead in process control systems which ensure the accurate control, reliability and repeatability of the processing parameters on all of our machines.”

Sellers remains committed to providing complete finishing solutions for all carpet, tile and artificial grass products. Its range includes machines for tufted secondary backing, both conventional, powder and extrusion lamination, Wilton and Axminster products, artificial grass and foam lines, coating lines for bitumen, PVC, PU and other polymers, as well as shearing for all carpet products.

Ongoing developments on the company’s coating and drying lines have resulted in improved guiding and product tension control as well as dryer efficiency, reducing heat loss and optimising energy use. These include a re-design of the fan pressure boxes and impingement nozzles to increase airflow efficiency, modulating gas burners and introducing easy clean, accessible filters.

In addition, the proven dual zone system has been enhanced, giving a temperature differential of up to 80°C between top and bottom zones. Dryers can be heated by either gas or steam and operation and access have been simplified with controls via touchscreen and PLC.

An extensive range of ancillary equipment is available to provide maximum flexibility to cover product requirements, for both new processing lines and as upgrades to existing equipment.

“Carpet manufacturing is now based on well-established, tried and trusted processes and it’s rare for new innovations to be introduced into this sector,” says Jason Kent, CEO of the British Textile Machinery Association. “The new Sellers Hybrid Shearing Cylinder can provide a competitive edge for manufacturers which is currently being proven in the field. It’s one of a number of new innovations the company is planning to showcase at next year’s ITMA exhibition in Milan.”

• Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

• Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

However, these results do not cancel the obstacles that companies are still facing. Looking to the near future, expectations are for a rather uncertain outlook, as underscored by ACIMIT President Alessandro Zucchi: “2022 remains a year replete with unknown factors, starting with the Russian-Ukrainian conflict, along with the persistence of the pandemic, which seriously risk delaying expected growth consolidation for businesses in the sector. Difficulties in finding raw materials and components negatively affect the completion and fulfilment of orders processed as far back as 2021. To boot, rising energy costs and inflationary trends affecting numerous commodities are depressing overall business confidence. So the outlook for the sector is not so good.”
As such, the two cornerstones through which ACIMIT aims to support the Italian textile machinery sector are digitilization and sustainability.

4.0: The textile machinery sector looks to the future
The road to digital transformation has already led numerous manufacturers to completely rethink their production processes, rendering them more efficient and l ess expensive. The digital world is moving ahead at a decisive rate in the textile machinery sector, where the buzzwords are increasingly, for instance, the Internet of Things connecting to a company’s ecosystem, machine learning algorithms applied to production, predictive maintenance, and the integrated cloud management of various production departments. It is no coincidence that ACIMIT has focused decisively on its Digital Ready project, through which Italian textile machinery that adopt a common set of data are certified, with the aim of facilitating integration with the operating systems of client companies (ERP, MES, CRM, etc.).

A green soul
Combining production efficiency and respect for the environment: a challenge ACIMIT has made its own and which it promotes among its members through the Sustainable Technologies project. Launched by the association as early as 2011, the project highlights the commitment of Italian textile machinery manufacturers in the area of sustainability. At the heart of the project is the Green Label, a form of certification specifically for Italian textile machinery which highlights its energy and environmental performance. An all-Italian seal of approval developed in collaboration with RINA, an international certification body.
The assembly held on 1 July provided an opportunity to take stock of the Sustainable Technologies project, more specifically, with the presentation of the Rina Consulting survey on the Green Label’s evolution and impact in recent years.

The results have confirmed the initiative’s extreme validity. The technological advances implemented by the association’s machinery producers participating in the project have effectively translated into benefits in terms of environmental impact (reduction of CO₂ equivalent emissions for machinery), as well as economic advantages for machinery users.

With reference to the year 2021, a total of 204,598 tons of CO₂ emissions avoided on an annual basis have been quantified, thanks to the implementation of improvements on machinery. This is a truly significant reduction which, for the sake of comparison, corresponds to the carbon dioxide emissions generated by 36,864 automobiles travelling an average of 35,000 km a year. In terms of energy savings, the use of green labeled textile machinery has provided excellent performances in allowing for a reduction of up to 84% in consumption.

A round table discussion on the Green Label’s primary purpose
The environmental and economic impact generated in production processes for Italian textile machinery through the use of Green Label technologies was the focus of the round table which concluded the ACIMIT assembly.

Moderated by Aurora Magni (professor of the Industrial Systems Sustainability course at the LIUC School of Engineering), the debate involved Gianluca Brenna (Lipomo Printing House administrator and Vice President of the Italian Fashion System for Welfare), Pietro Pin (Benetton Group consultant and President of UNI for the textile-clothing area), Giorgio Ravasio (Italy Country Manager for Vivienne Westwood), as well as ACIMIT President Alessandro Zucchi.

Called on to compare common factors in their experiences relating to environmental transition processes for their respective companies, the participants were unanimous: the future of Italian textile machinery can no longer ignore advanced technology developments capable of offering sustainable solutions with a low environmental impact while also reducing production costs. This philosophy has by now been consolidated, and has proven to lead directly to a circular economy outlook.

The upcoming ITMA 2023 exhibition
Lastly, a word on ITMA 2023, the most important international exhibition for textile machinery, to be held in Italy from 8 to 14 June 2023 at Fiera-Milano Rho. Marking the 19th edition of ITMA, this trade fair is an essential event for the entire industry worldwide, providing a global showcase for numerous innovative operational solutions on display. A marketplace that offers participants extraordinary business opportunities. The participation of Italian companies is managed by ACIMIT.