From the Sector

Reset
1545 results
(c) ZAMG/Niedermoser
Scientists ascending to the research station in the Hohe Tauern National Park
01.02.2022

Plastic snowfall in the Alps - New Empa Study about nanoplastic in the environment

In a new study, Empa researcher Dominik Brunner, together with colleagues from Utrecht University and the Austrian Central Institute for Meteorology and Geophysics, is investigating how much plastic is trickling down on us from the atmosphere. According to the study, some nanoplastics travel over 2000 kilometers through the air. According to the figures from the measurements about 43 trillion miniature plastic particles land in Switzerland every year. Researchers still disagree on the exact number. But according to estimates from the study, it could be as much as 3,000 tonnes of nanoplastics that cover Switzerland every year, from the remote Alps to the urban lowlands. These estimates are very high compared to other studies, and more research is needed to verify these numbers

The study is uncharted scientific territory because the spread of nanoplastics through the air is still largely unexplored.

In a new study, Empa researcher Dominik Brunner, together with colleagues from Utrecht University and the Austrian Central Institute for Meteorology and Geophysics, is investigating how much plastic is trickling down on us from the atmosphere. According to the study, some nanoplastics travel over 2000 kilometers through the air. According to the figures from the measurements about 43 trillion miniature plastic particles land in Switzerland every year. Researchers still disagree on the exact number. But according to estimates from the study, it could be as much as 3,000 tonnes of nanoplastics that cover Switzerland every year, from the remote Alps to the urban lowlands. These estimates are very high compared to other studies, and more research is needed to verify these numbers

The study is uncharted scientific territory because the spread of nanoplastics through the air is still largely unexplored.

The scientists studied a small area at an altitude of 3106 meters at the top of the mountain "Hoher Sonnenblick" in the "Hohe Tauern" National Park in Austria.
Every day, and in all weather conditions, scientists removed a part of the top layer of snow around a marker at 8 AM and carefully stored it. Contamination of the samples by nanoplastics in the air or on the scientists' clothes was a particular challenge. In the laboratory, the researchers sometimes had to remain motionless when a colleague handled an open sample.

The origin of the tiny particles was traced with the help of European wind and weather data. The researchers could show that the greatest emission of nanoplastics into the atmosphere occurs in densely populated, urban areas. About 30% of the nanoplastic particles measured on the mountain top originate from a radius of 200 kilometers, mainly from cities. However, plastics from the world's oceans apparently also get into the air via the spray of the waves. Around 10% of the particles measured in the study were blown onto the mountain by wind and weather over 2000 kilometers – some of them from the Atlantic.

It is estimated that more than 8300 million tonnes of plastic have been produced worldwide to date, about 60% of which is now waste. This waste erodes through weathering effects and mechanical abrasion from macro- to micro- and nanoparticles. But discarded plastic is far from the only source. Everyday use of plastic products such as packaging and clothing releases nanoplastics. Particles in this size range are so light that their movement in the air can best be compared to gases.

Besides plastics, there are all kinds of other tiny particles. From Sahara sand to brake pads, the world is buzzing through the air as abrasion. It is as yet unclear whether this kind of air pollution poses a potential health threat to humans. Nanoparticles, unlike microparticles, do not just end up in the stomach. They are sucked deep into the lungs through respiration, where their size may allow them to cross the cell-blood barrier and enter the human bloodstream. Whether this is harmful or even dangerous, however, remains to be researched.

Source:

Empa, Noé Waldmann

01.02.2022

EURATEX: High energy costs undermine crucial transformation of the textile and clothing industry

The current energy crisis is impacting on the competitiveness of the European textile and clothing industry. Because there are limited alternatives to the use of gas in different parts of the production process, production costs increase sharply. EURATEX asks the European Commission and Member States to urgently support the industry to avoid company closures. At the same time, we need a long term vision to move towards climate neutrality, while keeping the T&C industry internationally competitive.

EURATEX presented ten key requirements to Kadri Simson, European Commissioner for Energy, to develop such a vision:

The current energy crisis is impacting on the competitiveness of the European textile and clothing industry. Because there are limited alternatives to the use of gas in different parts of the production process, production costs increase sharply. EURATEX asks the European Commission and Member States to urgently support the industry to avoid company closures. At the same time, we need a long term vision to move towards climate neutrality, while keeping the T&C industry internationally competitive.

EURATEX presented ten key requirements to Kadri Simson, European Commissioner for Energy, to develop such a vision:

  1. The apparel and textile industry needs a safe supply with sufficient green energy (electricity and gas) at internationally competitive prices.
  2. The transformation of industry requires access to very significant amounts of renewable energy at competitive costs. Additional investments in infrastructure will also be needed to guarantee access to new renewable energy supplies.
  3. Until a global (or at least G 20 level) carbon price or other means for a global level playing field in climate protection are implemented, competitive prices for green energy must be granted at European or national levels (e.g. CCfDs, reduction on levies, targeted subsidies).
  4. As the European textile and clothing sector faces global competition mainly form countries/regions with less stringent climate ambitions, it is of utmost importance that the European textile and clothing companies are prevented form direct and indirect carbon leakage.
  5. EU-policy should support solutions, e.g. through targeted subsidies (for hydrogen, energy grids, R&D, technology roadmap studies etc.).
  6. A dedicated approach for SMEs might be appropriate as SMEs do not have the skills/know-how to further improve their energy efficiency and/or becoming carbon neutral.
  7. CAPEX and OPEX support will be necessary for breakthrough technologies, like hydrogen.
  8. The Fit-for-55-Package must support the European Textile and Clothing industry in decarbonization and carbon neutrality. The EU must therefore advocate a global level playing field more than before. The primary goal must be to establish an internationally uniform, binding CO2 pricing, preferably in the form of a standard at G-7 / G-20 level.
  9. EU-policy must not hinder solutions, e.g. we need reasonable state aid rules (compensating the gap between national energy or climate levies and a globally competitive energy price should not be seen as a subsidy).
  10. The European Textile and Clothing industry has made use of economically viable potentials to continuously improve energy efficiency over many years and decades. The obligation to implement further measures must be taken considering investment cycles that are in line with practice. Attention must be paid to the proportionality of costs without weakening the competitive position in the EU internal market or with competitors outside the EU.

Please see the attached position paper for more information.

Source:

EURATEX

(c) Hologenix
01.02.2022

Hologenix: Pure White Celliant wins ISPO Textrends Award

Hologenix® is pleased to announce that its newest innovation – pure white CELLIANT® – is a Top Ten winner in the Fibers & Insulation Category of ISPO Textrends Fall/Winter 2023/24. Twice a year, ISPO recognizes innovative fabrics and components that are used to manufacture sports apparel. It’s no surprise that this innovation, whereby CELLIANT infrared technology can be embedded in fibers and for those fibers to be pure white, has achieved this honor. Pure white expands the potential applications of CELLIANT to crisp white performance and athleisure apparel, athletic uniforms and jerseys, towels, bedding, baby clothes, medical apparel and more, while maintaining its well-known wellness benefits. Pure white is the foundation that makes delicate pastel fabrics, as well as any color, possible.

Hologenix® is pleased to announce that its newest innovation – pure white CELLIANT® – is a Top Ten winner in the Fibers & Insulation Category of ISPO Textrends Fall/Winter 2023/24. Twice a year, ISPO recognizes innovative fabrics and components that are used to manufacture sports apparel. It’s no surprise that this innovation, whereby CELLIANT infrared technology can be embedded in fibers and for those fibers to be pure white, has achieved this honor. Pure white expands the potential applications of CELLIANT to crisp white performance and athleisure apparel, athletic uniforms and jerseys, towels, bedding, baby clothes, medical apparel and more, while maintaining its well-known wellness benefits. Pure white is the foundation that makes delicate pastel fabrics, as well as any color, possible.

Pure white CELLIANT still captures and converts body heat into infrared energy, increasing local circulation, aiding in temperature regulation and promoting stronger performance, faster recovery and better sleep. Pure white CELLIANT is also still made from ethically sourced minerals from the earth and is available in nylon, polyester and recycled polyester fibers, while retaining the natural characteristics of the polymer.

This award follows on the heels of the 2022/23 ISPO Textrends Awards finalist selection of CELLIANT viscose in the Fibers and Insulations category, which features CELLIANT embedded into plant-based fibers.  “We are honored to achieve this recognition from ISPO for our pure white CELLIANT,” said Courtney OKeefe, Chief Supply Chain Officer for Hologenix. “This new formulation took years of work to achieve and is a testament to the dedication and talent of our global research team. We are also very proud to be able to state that we now have two ISPO-recognized fibers.”

More information:
Hologenix Celliant Sportswear Fibers
Source:

Hologenix, LLC / Sarah P. Fletcher Communications 

(c) Archroma
01.02.2022

Archroma launches a new vegan textile softener

Archroma announced the launch of EARTH SOFT, a new softening system for textile and fashion applications, based on Archroma's latest innovation, a vegan silicone softener, Siligen® EH1, with 35% plant-based active content.

Siligen® EH1 is the latest addition in the plant-based innovations developed by Archroma in recent years, such as EarthColors® dyes and Appretan® NTR binders, as alternatives offered to manufacturers and brands looking to reduce the use of fossil fuel based ingredients without compromising performance.

The range has been developed in line with the principles of “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. More than 35% of the Siligen® EH1 softener's active content is based on plant-based, renewable raw materials. In addition, the product features ultralow cyclic siloxanes (D4, D5, D6) which are classified by the European Chemicals Agency as “Substances of Very High Concern” due to their very persistent and bioaccumulative properties.

Archroma announced the launch of EARTH SOFT, a new softening system for textile and fashion applications, based on Archroma's latest innovation, a vegan silicone softener, Siligen® EH1, with 35% plant-based active content.

Siligen® EH1 is the latest addition in the plant-based innovations developed by Archroma in recent years, such as EarthColors® dyes and Appretan® NTR binders, as alternatives offered to manufacturers and brands looking to reduce the use of fossil fuel based ingredients without compromising performance.

The range has been developed in line with the principles of “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. More than 35% of the Siligen® EH1 softener's active content is based on plant-based, renewable raw materials. In addition, the product features ultralow cyclic siloxanes (D4, D5, D6) which are classified by the European Chemicals Agency as “Substances of Very High Concern” due to their very persistent and bioaccumulative properties.

Siligen® EH1 is ideally suited for shirts, underwear, sportswear, towels, bed sheets, etc. as it provides an excellent wearing comfort by supporting a good moisture transportation and delivering a smooth and soft touch.

The new softener, and the EARTH SOFT system which also includes a Hydroperm® wicking agent to boost hydrophilic properties on synthetic and blended fibers, can be applied on all natural and synthetic textile fibers.

Siligen® EH1 is suitable for both woven and knitted articles. It can be applied by padding process, as well as by exhaust process as it shows a very good shear stability and a low foaming profile. It can be used on white articles and those treated with optical brighteners, as it doesn’t cause thermomigration nor phenolic yellowing.

Paul Cowell, Head of Competence Centers for Brand & Performance Textile Specialties at Archroma, comments: “The new EARTH SOFT system based on Siligen® EH1 softener adds to our growing portfolio of innovations based on natural and renewable plant-based resources. This new breakthrough innovation by Archroma helps us and our partners in the textile and fashion industry to minimize our dependence on petroleum fossil fuel products.”

Source:

Archroma

31.01.2022

NCTO: Coalition are urging Support for De Minimis Provision in House America COMPETES Act

A broad coalition of industry and labor groups has sent a letter to House and Senate leadership urging support for the Import Security and Fairness Act (included in the broader House America COMPETES Act), which aims to stop China from exploiting the de minimis threshold that allows imports valued under $800 to come into the United States without paying duties and taxes, bypassing U.S. Customs inspections and providing a backdoor to Chinese goods produced with forced labor.

The coalition sent the letter to Senate Majority Leader Charles Schumer (D-NY), Senate Minority Leader Mitch McConnell (R-KY), Speaker of the House Nancy Pelosi (D-CA) and House Minority Leader Kevin McCarthy (R-CA), urging the leaders to strongly support and prioritize the provision in the underlying China bill.

The letter was signed by the following organizations:

A broad coalition of industry and labor groups has sent a letter to House and Senate leadership urging support for the Import Security and Fairness Act (included in the broader House America COMPETES Act), which aims to stop China from exploiting the de minimis threshold that allows imports valued under $800 to come into the United States without paying duties and taxes, bypassing U.S. Customs inspections and providing a backdoor to Chinese goods produced with forced labor.

The coalition sent the letter to Senate Majority Leader Charles Schumer (D-NY), Senate Minority Leader Mitch McConnell (R-KY), Speaker of the House Nancy Pelosi (D-CA) and House Minority Leader Kevin McCarthy (R-CA), urging the leaders to strongly support and prioritize the provision in the underlying China bill.

The letter was signed by the following organizations:

  • AFL-CIO
  • Alliance for American Manufacturing
  • Coalition for a Prosperous America
  • International Brotherhood of Teamsters
  • Narrow Fabrics Institute
  • National Council of Textile Organizations
  • Service Employees International Union
  • U.S. Footwear Manufacturers Association
  • U.S. Industrial Fabrics Institute
  • United Steelworkers
  • Workers United/SEIU

See the full letter here.

More information:
NCTO U.S. textile industry Import
Source:

NCTO

(c) adidas
28.01.2022

adidas and IVY PARK announce IVY HEART, a capsule collection

adidas and IVY PARK CEO Beyoncé announce IVY HEART, a new capsule collection inspired by love , just in time for Valentine’s Day, from the ongoing adidas x IVY PARK creative partnership.

As with previous adidas x IVY PARK offerings, this latest collection features distinct looks with inclusive and in gender-neutral sizing in fashion styles, performance gear, footwear, and accessories. The line is available online at adidas.com on February 9th and February 10th in selection stores globally.

adidas and IVY PARK CEO Beyoncé announce IVY HEART, a new capsule collection inspired by love , just in time for Valentine’s Day, from the ongoing adidas x IVY PARK creative partnership.

As with previous adidas x IVY PARK offerings, this latest collection features distinct looks with inclusive and in gender-neutral sizing in fashion styles, performance gear, footwear, and accessories. The line is available online at adidas.com on February 9th and February 10th in selection stores globally.

The Campaign
The campaign focuses on the guiding thematic color behind the collection. In the Western world, red is commonly associated with love , romance and sensuality. While in the East, red is attributed to good fortune and joy. Wherever you are, it’s clear that this color represents positivity. The concept is centered around bringing people together from all different backgrounds through this one color that’s sentimental to so many. This theme is illustrated through enhanced lighting, bold yet minimal production design, elevated styling and most importantly the international cast. Cultural cues from specific iconography and symbols are explored in visual motifs with sensitivity and intention. IVY PARK pays homage to various cultures inspired by this color, incorporating red through a futuristic yet authentic lens.

The Collection
No matter how you define it, love - most importantly love of one’s self - is at the core of IVY PARK ’s newest drop. Bold and sexy looks are an integral part of IVY HEART, which is aptly decked out in a spectrum of vibrant reds, playful pinks, and nuanced neutrals. In colors that include Candy Paint (Shock Pink), Lipstick Smudge (Red), Raspberry Beret (Power Red), Red, Red Whine (Cherry Wood) and Cheeks (Off-White), the line is punctuated by tactile materials like velour, ribbed knit, and faux latex.  IVY PARK ’s latest collaboration with adidas is further complemented by performance fabrics and graphic prints, allowing ample designs to mix-and-match from work out to night out.

The capsule collection’s design touchpoints are rooted in Beyoncé’s love of athleticism and fashion, merged with adidas’ performance and innovation. The references culminate in a collection of silhouettes that are sporty, stylish, and above all, unique. Conceived around three pillars of foundation, active, and fashion, IVY PARK ’s latest collection is highlighted by the Velour Dress and Tracksuit, Faux Latex Puffer, Pique Jumpsuit and Sequin Duster. Accessories include a 5-Panel Hat, a clutch and a Heart-Lip Belt Bag.

Footwear consists of both on-the-court and off-duty models.  The range is highlighted by a new iteration of the classic Stan Smith sneaker in Cheeks (Off-White), with a rubber dipped midsole.  Additionally, the collection introduces a new silhouette, the IVP Superstar Plim, a mule style shoe inspired by the iconic adidas Superstar in Cheeks (Off-White).  The line also features a new colorway of the IVP Savage sneaker in Cheeks (Off-White), a IVP swim slide in Lipstick Smudge (Red) and the Ultra boost in Candy Paint (Shock Pink).

More information:
adidas clothing footwear Sportswear
Source:

adidas

28.01.2022

Jamé: A fluid-wear collection made with Bemberg™ by Asahi Kasei

Jamé’s concept.   
Jamé is inspired by the ancient Pay-Jamé: a piece of clothing that a woman or a man used to wear for fluid wellbeing 24/7 regardless of the activity, or the location, or duration time it is needed for. It’s a comfy refined outfit to make people feel free.

Jamè’s values.
Jamé is designed and made in Italy, digitally printed and created to deliver wellness, style, and 24/7 comfort.  
Jamé’s fabric of choice is Bemberg™, a textile that gives Jamé the highest contemporary qualities: Jamé garments are cool in summer, warm in winter, perfect all year round, fashionable, trendy and versatile. The ideal companion for everyday activities, Jamé is perfect for both indoors and outdoors, the perfect outfit for every occasion, day or night.

Jamé’s concept.   
Jamé is inspired by the ancient Pay-Jamé: a piece of clothing that a woman or a man used to wear for fluid wellbeing 24/7 regardless of the activity, or the location, or duration time it is needed for. It’s a comfy refined outfit to make people feel free.

Jamè’s values.
Jamé is designed and made in Italy, digitally printed and created to deliver wellness, style, and 24/7 comfort.  
Jamé’s fabric of choice is Bemberg™, a textile that gives Jamé the highest contemporary qualities: Jamé garments are cool in summer, warm in winter, perfect all year round, fashionable, trendy and versatile. The ideal companion for everyday activities, Jamé is perfect for both indoors and outdoors, the perfect outfit for every occasion, day or night.

Environmental responsibility.
Every Jamé clothing is 100% recyclable and manufactured following a very contemporary and responsible made-to-order business model. The latest and greatest digital print technology assures us to avoid waste and over-production.
This means endless customization possibilities, creating a long lasting, high-quality product.

Styling.
Thanks to the expertise and knowledge of its founders Patrizia Marforio and Niccolò Zucchi Frua, Jamé’s vision is deeply rooted in the Italian design and textile tradition.
Jamé's historic archive - made up of more than 17.000 different textures from the 1920s to present day - seamlessly translating into the widest and deepest pattern choice in this one-of-a-kind collection.

Jamé’s fabric of choice:
Bemberg™ is the name of a technologically advanced fiber produced by Asahi Kasei. Bemberg™ is based on regenerated cellulose fiber made from the smart tech transformation of cotton linters.
As a pre-consumer material obtained from the manufacturing process of cotton seeds oil that is converted into fiber through a traceable and transparent closed loop process, Bemberg™ DNA is deeply based on a circular economy approach.
Bemberg™ is gentle on the skin, with amazing touch and exceptional moisture management properties: it quickly absorbs and releases moisture through very small waterways, keeping the wearer cool, fresh, and comfortable at any time of the year.

(c) „adVANture“ von - Nadine Tobias, Lara Marschall, 3. Semester Bachelor Transportation Interior Design, Hochschule Reutlingen
Dieses Semester online: die Werkschau der Studierenden des Studiengangs Transportation Interior Design
28.01.2022

Hochschule Reutlingen: Future Mobility Werkschau Winter 2022

Studierende des Studiengangs Transportation Interior Design der Hochschule Reutlingen haben sich ein Semester lang intensiv in Präsenz und mit digitalen Arbeits- und Kollaborationsmethoden mit Fragen zukünftiger Mobilität beschäftigt. Ihre Ergebnisse zum Thema „open space - der Camper der Zukunft“ präsentieren die Studierenden nun live online.

Camping boomt – der Urlaub mit dem Camper ist in und verspricht auch in Pandemiezeiten Flexibilität, Freiheit und Unabhängigkeit. Laut Caravaning Industrie Verband (CIVD) hat sich die Zahl der Neuzulassungen in den vergangen vier Jahren mehr als verdoppelt. Camper sind begehrte Fahrzeuge für unbeschwerte Urlaube. Rein in den Camper und einfach mal schnell aus dem Alltag entfliehen? Das Prinzip ist, nicht erst seit knapp 80.000 Neuzulassungen im Jahr 2021 (CIVD), bekannt und bewährt.

Studierende des Studiengangs Transportation Interior Design haben sich im Wintersemester 2021/2022 im Kooperationsprojekt „open space“ mit der Firma Rocket Camper aus Remshalden intensiv mit neuen, innovativen Nutzungsmöglichkeiten und Konzepten für Wohnmobile und Camper auseinandergesetzt.

Studierende des Studiengangs Transportation Interior Design der Hochschule Reutlingen haben sich ein Semester lang intensiv in Präsenz und mit digitalen Arbeits- und Kollaborationsmethoden mit Fragen zukünftiger Mobilität beschäftigt. Ihre Ergebnisse zum Thema „open space - der Camper der Zukunft“ präsentieren die Studierenden nun live online.

Camping boomt – der Urlaub mit dem Camper ist in und verspricht auch in Pandemiezeiten Flexibilität, Freiheit und Unabhängigkeit. Laut Caravaning Industrie Verband (CIVD) hat sich die Zahl der Neuzulassungen in den vergangen vier Jahren mehr als verdoppelt. Camper sind begehrte Fahrzeuge für unbeschwerte Urlaube. Rein in den Camper und einfach mal schnell aus dem Alltag entfliehen? Das Prinzip ist, nicht erst seit knapp 80.000 Neuzulassungen im Jahr 2021 (CIVD), bekannt und bewährt.

Studierende des Studiengangs Transportation Interior Design haben sich im Wintersemester 2021/2022 im Kooperationsprojekt „open space“ mit der Firma Rocket Camper aus Remshalden intensiv mit neuen, innovativen Nutzungsmöglichkeiten und Konzepten für Wohnmobile und Camper auseinandergesetzt.

Im Mittelpunkt stand dabei die Frage, wie clevere Verwandlungslösungen Räume vergrößern, individuell erlebbar machen und das Alltags- oder Urlaubsleben bereichern und erleichtern können. Gefragt waren Ideen zur Raum-Erweiterung und Strukturierung unter Einsatz von smarten Oberflächen. Basierend auf Analysen aktueller Lifestyle Szenarien ging es für die Studierenden vor allem um die Fragestellung, welche neuen Aufgaben ein solch innovativer Camper übernehmen und damit einen Mehrwert für seinen Nutzer bieten kann.

Ein Camper als mitwachsendes Raumwunder für Patchworkfamilien? Ein Camper mit individuellen Möglichkeiten für Hundebesitzer? Ein Camper als Arbeitsplatz? Ein Camper, der Stress reduziert und das Leben bereichert? Wie kann die Umgebung nach drinnen geholt werden? Smarte Oberflächen, die beim Fokussieren helfen und welches Thema spielt dabei das autonome Fahrzeug?

Die Ergebnisse der Studierenden werden am 04.02.22 online auf der Live-Online-Werkschau und Online-Ausstellung präsentiert. Mehr Informationen finden Sie hier.

Source:

Hochschule Reutlingen

27.01.2022

Radici Yarn certified to ISO 50001 Energy Management Systems

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

The energy issue has always been a priority for Radici Yarn, whose products serve numerous sectors, including automotive, clothing and furnishings.

"Already at the beginning of the 1990s, Radici Yarn started investing in cogeneration, the simultaneous production of electricity and steam,” pointed out Laura Ravasio, energy manager of Radici Yarn SpA. “We have recently started up an advanced trigeneration plant – a highly efficient system that produces not only electricity and steam, but also chilled water for our production processes. One of the first results recorded in 2021 was a 30% reduction in water consumption. Thus, ISO 50001 certification seemed like the next logical step to take in formalizing a long-term approach to energy.”

The ISO 50001 certification, which is voluntary and valid for a period of three years, was added to the ISO 14001 Environmental and ISO 9001 Quality Management system certifications previously achieved by Radici Yarn.

Source:

RadiciGroup

27.01.2022

OCA, GOTS and Textile Exchange expand GM Cotton Testing Lab Initiative

Global Organic Textile Standard (GOTS), the Organic Cotton Accelerator (OCA) and Textile Exchange are delighted to announce the renewal of the global ISO IWA 32:2019 proficiency test for a second year in a row, under technical support from Wageningen Food Safety Research.

The initiative aims to provide the sector with an up-to-date overview of global laboratories that can currently conduct GMO testing as per the ISO IWA 32:2019 protocol – a common language among laboratories worldwide to screen for the potential presence of genetically modified (GM) cotton along the organic cotton value chain.

Global Organic Textile Standard (GOTS), the Organic Cotton Accelerator (OCA) and Textile Exchange are delighted to announce the renewal of the global ISO IWA 32:2019 proficiency test for a second year in a row, under technical support from Wageningen Food Safety Research.

The initiative aims to provide the sector with an up-to-date overview of global laboratories that can currently conduct GMO testing as per the ISO IWA 32:2019 protocol – a common language among laboratories worldwide to screen for the potential presence of genetically modified (GM) cotton along the organic cotton value chain.

The joint project involving three global NGOs in the textile sector, announces that it has reached a new milestone with an expanded list of twenty-one laboratories from Europe, Asia and North America who have successfully passed a new round of the proficiency test in 2021.

As qualitative GM cotton screening using the ISO IWA 32:2019 protocol is mandatory within the GOTS and OCS (Organic Content Standard) supply chain and OCA’s Farm programme, the expanded list will provide many stakeholders in Organic Cotton with the clarity they need for taking all reasonable precautions to prevent GM cotton in their organic cotton produce while supporting the rapid sector growth seen globally.

The updated overview of the laboratories that successfully passed the proficiency test in 2021 has now been jointly published by GOTS, OCA and Textile Exchange.

The initiative now in its second year, will drive greater transparency along the organic cotton supply chain in a move that the partners hope will become a fixed bi-annual initiative stemming from the positive feedback from the initial launch in 2020.

(c) Sappi Europe
27.01.2022

Sappi: Expanded production options for Fusion Topliner

Sappi, a leading provider of sustainable woodfibre-based packaging materials, is expanding production of its successful Fusion Topliner grade to its flagship mill in Gratkorn, Austria. The Fusion Topliner – a white virgin fibre liner for high-quality corrugated packaging – will also continue to be manufactured at Sappi’s Ehingen mill in Germany. With this project, Sappi isn’t just expanding its production capacity in the corrugated board business. By offering the same product quality from both mills, Sappi is bringing production closer to its customers – to guarantee a sustainable and short supply chain in the heart of Europe.

Sappi, a leading provider of sustainable woodfibre-based packaging materials, is expanding production of its successful Fusion Topliner grade to its flagship mill in Gratkorn, Austria. The Fusion Topliner – a white virgin fibre liner for high-quality corrugated packaging – will also continue to be manufactured at Sappi’s Ehingen mill in Germany. With this project, Sappi isn’t just expanding its production capacity in the corrugated board business. By offering the same product quality from both mills, Sappi is bringing production closer to its customers – to guarantee a sustainable and short supply chain in the heart of Europe.

  • Sappi’s Fusion Topliner virgin fibre liner strengthens brand image and impact, and demand continues to grow
  • Capacities are now being expanded through significant investment at Gratkorn mill, Austria
  • Volumes will be enlarged in the next months to ensure reliable customer supply

Just a decade ago, there were only two options on the market for coated white corrugated liners: either kraft liner made from high-quality raw materials and with a very low recycled content, or test liner, which consists almost exclusively of recycled paper. As an alternative, Sappi developed its Fusion Topliner, now the most widely used corrugated liner made from pure virgin fibre. It is recommended for applications such as premium quality consumer goods packaging and POS displays – where high visual impact and differentiation are key. The product also stands out with exceptional strength and versatility.

Sappi’s Fusion Topliner has been successful on the market for many years. Demand for the product has continued to grow, due to its exceptional characteristics for print quality and finishing. Production is now being expanded from the German mill in Ehingen to include Sappi’s flagship mill in Gratkorn. The available capacities are now being expanded to include the production of Fusion Topliner in addition to existing graphic papers. Volume availability will be increased month by month to support the expected growth of our customers, and to satisfy large requirements in the corrugated board business.

Source:

Sappi Europe / Ruess Group

(c) Hohenstein
27.01.2022

Hohenstein tests and certifies FFP respiratory masks

The textile service provider Hohenstein has successfully extended its accreditations as a testing laboratory and certification body to include FFP (Filtering Face Pieces) respiratory masks in accordance with DIN EN 149, thus completing its portfolio in the textile mask sector. The necessary functional and safety tests on community masks, medical masks and FFP respiratory masks contribute to consumer safety. In addition, Hohenstein has not only been a member of the German Mask Association since September 2021, which pools the expertise of all mask manufacturers and suppliers in Germany, but also supports the Quality Working Group with its expertise in the field of textile protective clothing.

The textile service provider Hohenstein has successfully extended its accreditations as a testing laboratory and certification body to include FFP (Filtering Face Pieces) respiratory masks in accordance with DIN EN 149, thus completing its portfolio in the textile mask sector. The necessary functional and safety tests on community masks, medical masks and FFP respiratory masks contribute to consumer safety. In addition, Hohenstein has not only been a member of the German Mask Association since September 2021, which pools the expertise of all mask manufacturers and suppliers in Germany, but also supports the Quality Working Group with its expertise in the field of textile protective clothing.

Filtering Face Pieces are primarily used for the self-protection of the wearer and are intended to protect from harmful aerosols, particles and droplets. There are different protection levels for FFP respiratory masks (FFP 1-3), depending on how well they retain liquid and solid particles. In occupational safety, they are part of personal protective equipment (PPE) and fall under category III. Their protective function is specified throughout Europe by the DIN EN 149:2009-08 standard, which requires laboratory tests and practical performance tests with test persons. The Hohenstein testing laboratory carries out reliable proof of the safety of FFP respiratory masks in several test steps:

  • Through visual inspection, the Hohenstein experts assess the correct labelling, the comprehensibility of the enclosed instructions for using the masks, as well as the functionality and packaging.   
  • Laboratory tests can determine, among other things, breathing resistance, filter medium transmittance and inward leakage. The practical performance of FFP respiratory masks is assessed through realistic tests with test persons.
  • Test persons can also be employed to assess other parameters such as skin tolerance, field of vision or headgear comfort.
  • Optional tests, such as testing FFP respiratory masks for harmful substances, complete the safety verification.

Since the beginning of the pandemic, a particularly large number of FFP respiratory masks with doubtful and even false labelling have been in circulation, so reliable and neutral testing and certification of these products is essential. Hohenstein, with its many years of extensive experience in the testing and certification of personal protective equipment, thus offers the ideal service for customers who value testing quality "Made in Germany".

As a testing laboratory for medical devices, Hohenstein also offers testing of medical face masks for their bacterial filtering performance, differential pressure as an indicator of breathing activity, microbiological purity and cytotoxicity, among others. Medical face masks fall under the Medical Devices Regulation 2017/745 and fulfil the requirements according to EN 14683. The testing service provider Hohenstein has already taken a big step towards safety and functionality with the introduction of its quality label for Tested Community Masks in June 2020 and also tests according to the first European Guideline for Everyday Masks, the CEN Workshop Agreement (CWA) 17553:2020.

Source:

Hohenstein

(c) EREMA Group GmbH
26.01.2022

EREMA: From reserve site to production plant in just a few months

Just under a year ago, the EREMA Group started to repurpose the premises of Gruber & Kaja in St. Marien, which they took over as a reserve site in January 2021. In the meantime, a lot is going on there.

"When this site came up for sale, it only took us a few days to decide to buy the 40,000m² plot, including the workshop hall, which has an area of 15,000m²," says Manfred Hackl, CEO of EREMA Group GmbH. Around EUR 20 million was invested in the purchase, as the site offered the opportunity to increase production capacity by 60 percent in the immediate vicinity of the company headquarters in Ansfelden.

The fact that this site is now already being used so intensively was not envisaged at the time, because at the end of 2020 the company was just completing the expansion to their headquarters in Ansfelden, involving an investment of around EUR 17 million. 20 new jobs have already been created as a result, with a further 30 to follow in the next few months. By the time the new site is completed, the total number of new jobs will be up to 150.

Just under a year ago, the EREMA Group started to repurpose the premises of Gruber & Kaja in St. Marien, which they took over as a reserve site in January 2021. In the meantime, a lot is going on there.

"When this site came up for sale, it only took us a few days to decide to buy the 40,000m² plot, including the workshop hall, which has an area of 15,000m²," says Manfred Hackl, CEO of EREMA Group GmbH. Around EUR 20 million was invested in the purchase, as the site offered the opportunity to increase production capacity by 60 percent in the immediate vicinity of the company headquarters in Ansfelden.

The fact that this site is now already being used so intensively was not envisaged at the time, because at the end of 2020 the company was just completing the expansion to their headquarters in Ansfelden, involving an investment of around EUR 17 million. 20 new jobs have already been created as a result, with a further 30 to follow in the next few months. By the time the new site is completed, the total number of new jobs will be up to 150.

This development is due to the high demand for the EREMA Group's plastics recycling technologies and the trend towards ever-larger recycling plants. "Just in December, we delivered a VACUREMA® system to Brazil that will produce up to 40,000 metric tonnes of recycled PET (rPET) per year. That is equivalent to recycling around 1.1 billion 1.5-litre PET bottles. This site provides the perfect conditions for building this scale of machine," says Hackl.

Markus Achleitner, Upper Austria's Minister for the Economy, was also impressed by this development during his visit to St. Marien. "There is hardly any other region in the world that focuses as closely on materials expertise and the circular economy as in Upper Austria. We want to fully exploit this potential with our #upperVISION2030 business and research strategy. EREMA is an important driver in this industry. It makes me all the more pleased that the company owners have once again confirmed their commitment to Upper Austria as a business location, to the circular economy and to the employees by developing this site," says Achleitner. "This investment is an important positive signal for the entire region of Upper Austria location, especially in the current challenging times, and all the more so for creating 150 jobs," he emphasises.

New site milestones
Since January 2021, part of the existing office and hall space at Kunststoffstraße 1, as the site's address is now called, has been occupied by companies and departments of the EREMA Group. UMAC GmbH, a subsidiary specialising in servicing and trading previously owned recycling machines, which was severely short of space at its main location in Styria, moved its entire production and administration to St. Marien. Large areas of hall storage space were adapted for both UMAC and EREMA GmbH. The paint shop was also relocated from Ansfelden to St. Marien, and another hall was equipped for building large-scale VACUREMA® systems - these are systems used all over the world to recycle PET bottles. Production in this workshop is now being ramped up step by step.
Space that is not being used in St. Marien over the medium-term will be rented out. An industry-related firm has already moved in, and another 300 m² of office space is currently still available.

More information:
EREMA plastics Recycling
Source:

EREMA Group GmbH

(c) SHIMA SEIKI MFG., LTD
25.01.2022

SHIMA SEIKI to exhibit at Pitti Filati with flat knitting machine

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

The N.SVR®123SP computerized knitting machine features a special loop presser bed, capable of producing hybrid inlay fabrics with both knit and weave characteristics. Demand for such novel fabrics are very high across a wide range of applications, from fashion apparel to sportswear, innerwear, outerwear, uniforms and other functional clothing, as well as home furnishing and technical textiles. Shown in 18G at the SHIMA SEIKI booth, N.SVR®123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible. An SVR®123SP machine in 14G with i-Plating option will also be on display at the booth of yarn spinner IAFIL S.p.A. as well.

APEXFiz™ is subscription-based design software that maintains the proven functions that have made SHIMA SEIKI’s SDS®-ONE APEX series design systems so popular with fashion designers. Installed on personal computers, those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

APEXFiz™ along with SHIMA SEIKI’s yarnbank™ digital yarn web platform are featured at a special section launched at the previous session of Pitti Filati no. 89 called Pitti Studios. Pitti Studios is a content production service that yarn companies exhibiting at Pitti Filati can use for their own promotion. Yarn companies provide a piece of yarn, which is digitized on yarnbank™ and used to simulate photorealistic fabric on APEXFiz™. This is then processed by a creative studio specializing in digital content to provide static and animated 3D virtual representations. The process shows how to use the latest DX tools to provide accurate representation of a finished garment without having to produce any fabric, converting the conventionally wasteful process of sample-making into a sustainable one.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio.

Source:

SHIMA SEIKI MFG., LTD

(c) Epson
SureColor SC-R5000L
25.01.2022

Epson: SureColor Großformatdrucker erhalten Buyers Lab 2022 Awards

Drei Epson Großformatdrucker sind mit den Buyers Lab (BLI) 2022 Wide Format Pick Awards ausgezeichnet worden. Mit den Auszeichnungen von Keypoint Intelligence, einem weltweit führenden unabhängigen Anbieter von Testdienstleistungen, werden Produkte gewürdigt, die in den letzten 24 Monaten vorgestellt wurden und seitdem in den Testlaboren am besten abgeschnitten haben.

Die drei Ehrungen gehen an:

Drei Epson Großformatdrucker sind mit den Buyers Lab (BLI) 2022 Wide Format Pick Awards ausgezeichnet worden. Mit den Auszeichnungen von Keypoint Intelligence, einem weltweit führenden unabhängigen Anbieter von Testdienstleistungen, werden Produkte gewürdigt, die in den letzten 24 Monaten vorgestellt wurden und seitdem in den Testlaboren am besten abgeschnitten haben.

Die drei Ehrungen gehen an:

  • Epson SureColor SC-S60600L
    Epson 54"/64" Eco-Solvent/Latex Drucker für hohe Produktionsleistung
  • Epson SureColor SC-S80600L
    Epson 54"/64" Eco-Solvent/Latex Drucker mit ausnehmend weitem Farbraum
  • Epson SureColor R5000-Serie
    Epson 54"/64" Eco-Solvent/Latex 54"/64" Drucker

David Sweetnam, Direktor für Forschung und Labordienstleistungen EU/Asien bei Keypoint Intelligence, sagt: „Aufgrund der Pandemie umfassen diese Auszeichnungen getestete Produkte, die in den letzten zwei Jahren auf den Markt gebracht wurden, wobei mehrere Anbieter zum ersten Mal teilnahmen. Die Konkurrenz war groß, aber am Ende hat Epson in drei unserer Wide Format Signage Pick-Kategorien gewonnen. Diese drei Geräte haben eine beeindruckende Produktivität und ein sehr benutzerfreundliches Design, gepaart mit der besten Ausgabequalität ihrer Klasse. Die neuen Epson Tintendrucker mit Resin-Tinte zielen dabei auf den Latex-Tintenmarkt ab, während die beiden anderen Gewinner mit dem neuen Epson Edge-RIP und besonders großvolumigen Tintentanks ausgestattet sind. Damit gewannen sie wie schon zuvor ihre mit Patronen arbeitenden Geschwister im Jahr 2018 die BLI-Awards."

More information:
Epson Digitaldruck Awards
Source:

Epson Deutschland GmbH

24.01.2022

JEC World 2022 postponed

After thorough consultation with the exhibitors and partners of the event, JEC Group has decided to postpone the 2022 edition of JEC World. The world’s leading composites event will now take place from May 3rd to 5th, 2022, at the same venue Paris Nord Villepinte, as well as online via the JEC World Connect digital platform.

JEC World gathers the whole value chain of the composite materials industry in Paris, France every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

After thorough consultation with the exhibitors and partners of the event, JEC Group has decided to postpone the 2022 edition of JEC World. The world’s leading composites event will now take place from May 3rd to 5th, 2022, at the same venue Paris Nord Villepinte, as well as online via the JEC World Connect digital platform.

JEC World gathers the whole value chain of the composite materials industry in Paris, France every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

“We are fully dedicated to supporting the composites industry and to fostering its development via our events and media activities. Exhibitors and partners are strongly supporting JEC World, their leading event and want to meet in person in 2022 to activate business, share knowledge and highlight innovations. Postponing from March to May is a way to offer improved conditions to satisfy the industry requirements for such a trade fair as JEC World”, says Eric Pierrejean, CEO of JEC Group.

The JEC World team has decided to postpone the event after conducting a survey of its exhibitors and partners, confirming that a large majority is in favour of the new dates in May. As already planned, for three days, the event will offer for the first time a digital platform, JEC World Connect, in parallel to the in-person event in Paris for an augmented digital experience. Even after the show, via the JEC Web TV, unique content will be available to extend the reach of the event.

“Our main concern is to create the best possible conditions for our participants for successful networking, inspiration and business success. With a postponement of eight weeks we can enable this and offer to the industry the event it deserves. Taking the decision now, after consultation of all exhibitors, was necessary to give them planning and preparation visibility,” adds Thomas Lepretre, VP Events, Sales and Operations.

Source:

JEC Group

24.01.2022

Sateri completes Higg Facility Social and Labour Module Assessment

All of Sateri’s five viscose mills in China have undergone independent evaluation of their social and labour practices, having completed the Higg Facility Social and Labour Module (FSLM) audit and achieved a consistent high score of above 80%.

A member of the RGE group of companies, Sateri is also one of the world’s first viscose producers to have completed the Higg Facility Environmental Module (FEM) assessment, with the similar verified high score of over 80% for all its viscose mills.

Developed by the Sustainable Apparel Coalition, a global, multi-stakeholder non-profit alliance for the fashion industry, the Higg Index is a suite of tools that enables brands, retailers and facilities of all sizes to accurately measure and score a company or product’s sustainability performance.

The FSLM tool of the Higg Index holistically assesses working conditions of the mills, including fair wages and compensation, health & safety, respectful treatment of employees etc; while the FEM tool focuses more on environmental performance, including energy consumption, greenhouse gas missions, water use, chemical and waste management.

All of Sateri’s five viscose mills in China have undergone independent evaluation of their social and labour practices, having completed the Higg Facility Social and Labour Module (FSLM) audit and achieved a consistent high score of above 80%.

A member of the RGE group of companies, Sateri is also one of the world’s first viscose producers to have completed the Higg Facility Environmental Module (FEM) assessment, with the similar verified high score of over 80% for all its viscose mills.

Developed by the Sustainable Apparel Coalition, a global, multi-stakeholder non-profit alliance for the fashion industry, the Higg Index is a suite of tools that enables brands, retailers and facilities of all sizes to accurately measure and score a company or product’s sustainability performance.

The FSLM tool of the Higg Index holistically assesses working conditions of the mills, including fair wages and compensation, health & safety, respectful treatment of employees etc; while the FEM tool focuses more on environmental performance, including energy consumption, greenhouse gas missions, water use, chemical and waste management.

Source:

Sateri

Photo: ANDRITZ
24.01.2022

ANDRITZ to supply a spunlace line to Texygen Textile

International technology group ANDRITZ has received an order from the Uzbek cotton spinning specialist Texygen Textile LLC to supply a complete neXline spunlace line. Start-up is scheduled for the first quarter of 2023.

This will be the first spunlace line ever installed in Uzbekistan. The equipment will process high-quality cotton fibers in a fully integrated production line, from bleaching to winding. With this new line, Texygen Textile LLC will be able to produce top-class spunlace wipes made of 100% cotton, thus opening up new market opportunities.

The ANDRITZ equipment will minimize fiber loss and enable Texygen to produce a high-end spunlace fabric that will allow the company to serve the international medical industry with spunlace wipes.

Established in 2010, Texygen is a frontrunner in the Uzbekistan textile industry, especially in cotton spinning. The company has its headquarters in Tashkent, Uzbekistan.

International technology group ANDRITZ has received an order from the Uzbek cotton spinning specialist Texygen Textile LLC to supply a complete neXline spunlace line. Start-up is scheduled for the first quarter of 2023.

This will be the first spunlace line ever installed in Uzbekistan. The equipment will process high-quality cotton fibers in a fully integrated production line, from bleaching to winding. With this new line, Texygen Textile LLC will be able to produce top-class spunlace wipes made of 100% cotton, thus opening up new market opportunities.

The ANDRITZ equipment will minimize fiber loss and enable Texygen to produce a high-end spunlace fabric that will allow the company to serve the international medical industry with spunlace wipes.

Established in 2010, Texygen is a frontrunner in the Uzbekistan textile industry, especially in cotton spinning. The company has its headquarters in Tashkent, Uzbekistan.

More information:
Andritz spunlace line cotton Fibers
Source:

ANDRITZ AG

21.01.2022

Die Highlights der Frankfurt Fashion Week im Januar 2022

Vom 17. bis 21. Januar 2022 bot die Frankfurt Fashion Week Branchenführer*innen, Modeschöpfer*innen und allen Fashioninteressierten eine Plattform zur Inspiration und zum Austausch – an ausgewählten Orten in der Stadt und digital im FFW Studio.

„Zu den Highlights gehörten die Neonyt Installation, die Frankfurt Stage Fashion Show des Fashion Council Germany, spannende Talkrunden des Neonyt-Konferenzformats Fashionsustain, vielfältige Official Side Events und die Eventreihe von AAAREA, dem Festival zur Frankfurt Fashion Week,“ so Frankfurts Oberbürgermeister Feldmann in einem Statement. „Am heutigen Freitag endete nun die Frankfurt Fashion Week und wir blicken auf inspirierende Modenschauen, Stadtteilaktionen und spannende Ausstellungen zurück. Wir konnten erfahren, welch großes Potenzial in unserer Stadt und ihrer Kreativ- und Designszene stecken. Im Sommer werden wir dann verstärkt auch den internationalen Vertreter*innen aus Industrie, Handel und Design in unserer Heimatstadt eine neue Plattform bieten.“

Vom 17. bis 21. Januar 2022 bot die Frankfurt Fashion Week Branchenführer*innen, Modeschöpfer*innen und allen Fashioninteressierten eine Plattform zur Inspiration und zum Austausch – an ausgewählten Orten in der Stadt und digital im FFW Studio.

„Zu den Highlights gehörten die Neonyt Installation, die Frankfurt Stage Fashion Show des Fashion Council Germany, spannende Talkrunden des Neonyt-Konferenzformats Fashionsustain, vielfältige Official Side Events und die Eventreihe von AAAREA, dem Festival zur Frankfurt Fashion Week,“ so Frankfurts Oberbürgermeister Feldmann in einem Statement. „Am heutigen Freitag endete nun die Frankfurt Fashion Week und wir blicken auf inspirierende Modenschauen, Stadtteilaktionen und spannende Ausstellungen zurück. Wir konnten erfahren, welch großes Potenzial in unserer Stadt und ihrer Kreativ- und Designszene stecken. Im Sommer werden wir dann verstärkt auch den internationalen Vertreter*innen aus Industrie, Handel und Design in unserer Heimatstadt eine neue Plattform bieten.“

„Trotz massiver pandemiebedingter Einschränkungen konnten wir der Branche bei einer Vielzahl an Events erste Inspirationen und Impulse liefern. Nach der langen Pause waren der Austausch und das Get-together dringend nötig, wenngleich wir leider nur einen Bruchteil dessen verwirklichen konnten, was unser Konzept vorsieht. Wir starten mit voller Energie in die neue Saison und freuen uns gemeinsam auf die Juli-Ausgabe mit den Premieren der großen internationalen Tradeshows in Frankfurt“, sagt Olaf Schmidt, Vice President Textiles & Textile Technologies der Messe Frankfurt.

Klarer Fokus auf Nachhaltigkeit
Stylisch kuratierte Fashion-Statements mit klarem Fokus auf Nachhaltigkeit: Bei der Neonyt Installation trafen Independent- und Newcomer-Labels auf etablierte Marken. Diese Multi-Brand-Looks wurden künstlerisch-innovativ in Szene gesetzt. Die daran anschließende Show von Susumu Ai, veranstaltet vom Fashion Council Germany, unterstrich eindrücklich, dass nachhaltige Mode auf die internationalen Runways gehört. Auch die hybrid ausgerichtete Konferenz Fashionsustain thematisierte den wichtigen Transformationsprozess der Textil- und Modebranche. Hochkarätige Speaker*innen teilten Insights mit einem internationalen Publikum und führenden Branchenvertreter*innen rund um die Themen Attitude-Behaviour-Gap, Konsument*innenverhalten, unternehmerische Sorgfaltspflicht und Nachhaltigkeit am Point-of-Sale.

Erfolgreiche Premiere von AAAREA
AAAREA, das Festival zur Frankfurt Fashion Week, hat Mode für Fashion-Fans im Stadtgebiet erlebbar gemacht. „Das Festival war das erste seiner Art, das wir parallel zur Frankfurt Fashion Week realisiert haben. Mit dieser Premiere sind wir sehr gut in die Event-Reihe gestartet“, stellt Claus Fischer, einer der drei Geschäftsführer von AAAREA, fest. Auch im kommenden Juli wird AAAREA wieder wichtiger Bestandteil der Frankfurt Fashion Week sein – dann mit deutlich mehr Präsenz-Formaten.

Ausblick: Neue Saison, neue Formate
Vom 4. bis 8. Juli 2022 wird Frankfurt am Main in voller Bandbreite zur Bühne für die internationale Fashionbranche. Dabei feiern zwei brandneue Formate ihre Premiere: Die Val:ue wird die neue Homebase für Quality- und Lifestyle-Fashion im Mainstream-Bereich, veranstaltet von der Messe Frankfurt. The Ground, organisiert von der Premium Group, komplettiert das Programm als Fashion-Festival für eine purpose-orientierte Generation. Dabei richtet die Frankfurt Fashion Week im Juli 2022 wieder verstärkt den Fokus auf Nachhaltigkeit. Neben der Neonyt, der Community-Plattform für Mode, Nachhaltigkeit und Innovationen, sind hierzu weitere Event-Formate in Planung, unter anderem eine Fortsetzung der erfolgreichen Konferenz „The New European Bauhaus – Werkstatt der Zukunft“, organisiert vom Fashion Council Germany in Kooperation mit der Frankfurt Fashion Week. Auch in Zusammenarbeit mit dem Conscious Fashion & Lifestyle Network und dem United Nations Office for Partnerships werden weitere Formate realisiert.

Source:

Messe Frankfurt GmbH

(c) Sitip
21.01.2022

Sitip presents COSMOPOLITAN Fashion-tech fabrics at Milano Unica

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

Source:

Sitip / Valeria Rastrelli