From the Sector

• Monforts customer Kipaş has been selected as the sole denim manufacturing partner in the €6.7 million European Union-funded New Cotton Project, involving the brands adidas and H&M, working in a consortium with suppliers, innovators and research institutes.

Kipaş, based in Kahramanmaraş, Turkey, is currently installing its third Monforts Montex stenter along with a third Monfortex compressive shrinkage system in a combined configuration dedicated to denim production.

This follows the successful installation and commissioning of the second Montex and Monfortex lines at the Kahramanmaraş plant in 2018, which Kipaş Vice Chairman of the Board Ahmet Öksüz said had immediately exceeded expectations.

“We performed a very thorough technical investigation based on the latest Industry 4.0 analysis before the purchase, to determine what we needed, and the Monforts technology met all our requirements,” he said, in an interview with Textilegence magazine. “The Monfortex is equipped with a variety of features not found on classical shrinkage machines and the production can be monitored from beginning to end. It also exceeded our expectations in energy cost savings.”

Kipaş subsequently received a special certificate from Monforts in recognition of its exceptional utilisation of the technology to its full potential.

The latest Montex stenter now being installed at Kipaş is a 12-chamber unit with a working width of 2 metres featuring all of the latest automation features. The Monfortex unit, also with a working width of 2 metres, is in a ‘double rubber’ configuration, comprising two compressive shrinkage units and two felt calenders in line. This allows the heat setting of elastane fibres and the residual shrinkage of the denim to be carried out simultaneously, for a significant increase in production speeds.

“Around 90-95% of denim fabric production now contains elastane fibres and the Monforts system has allowed us to simultaneously increase our production and quality in this respect,” Mr Öksüz said.

Regenerated cotton
For the next three years within the New Cotton Project, Kipaş will manufacture denim fabrics based on the cellulose-based fibres of Infinited Fiber Company of Finland, made from post-consumer textile waste that has been collected, sorted and regenerated.

The patented technology of Infinited, which is leading the consortium of 12 companies, turns cellulose-rich textile waste into fibres that look and feel like cotton.

“We are very excited and proud to lead this project which is breaking new ground when it comes to making circularity in the textile industry a reality,” said Infinited co-founder and CEO Petri Alava. “The enthusiasm and commitment with which the entire consortium has come together to work towards a cleaner, more sustainable future for fashion is truly inspiring.”

Take-back programmes
Adidas and H&M will establish take-back programmes to collect the clothing that is produced, to determine the next phase in their lifecycle. Clothing that can no longer be worn will be returned to Infinited, for regeneration into new fibres, further contributing to a circular economy in which textiles never go to waste, but instead are reused, recycled or turned into new garments.

The aim is to prove that circular, sustainable fashion can be achieved today, and to act as an inspiration and stepping stone to further, even bigger circular initiatives by the industry going forward.

The EU has identified the high potential for circularity within the textile industry, while simultaneously highlighting the urgent need for the development of technologies to produce and design sustainable and circular bio-based materials. Making sustainable products commonplace, reducing waste and leading global efforts on circularity are outlined in the European Commission’s Circular Economy Action Plan.

Fashion brands produce nearly twice as many clothes today as they did 20 years ago and demand is expected to continue growing. At the same time, the equivalent of one garbage truck of textiles is landfilled or burned every second. Most of the textile industry’s environmental problems relate to the raw materials used by the industry – cotton, fossil-based fibres such as polyester, and viscose as the most common man-made cellulosic fibre, are all associated with serious environmental concerns.

The Swiss Technology Award announced the 2020 prizes, and among all the notable finalist innovations of the year, HeiQ was bestowed the highest honor as First Prize Winner for its breakthrough antiviral textile technology HeiQ Viroblock.

Developed in record time and launched after the Swiss authorities announced the lockdown in March 2020, HeiQ Viroblock has had a major impact on the global textile industry and is being unprecedently adopted by mills around the world.

The technology that makes HeiQ Viroblock a unique innovation
What exemplifies HeiQ Viroblock is its ability to turn any fabric antiviral. It’s among the first textile technologies in the world to be proven effective against SARS-CoV-2 (COVID-19). HeiQ Viroblock consists of a combination of HeiQ’s patent-pending vesicle and silver technologies. The two mechanisms of attack result in an over 99.9% destruction of viruses in 5 minutes that is unrivaled in the industry. HeiQ Viroblock is a unique patent-pending formulation of 72% bio-based ingredients, made with 100% cosmetic-grade materials from the International Nomenclature of Cosmetic Ingredients list. HeiQ Viroblock is also a shining example of Swiss cooperation between academics and the industry. The silver technology was developed at ETHZ (Eidgenössische Technische Hochschule Zürich), the vesicle technology at EPFL (École polytechnique fédérale de Lausanne), and the production was scaled up at FHNW (Fachhochschule Nordwestschweiz).

HeiQ Viroblock has demonstrated unparalleled speed from laboratory to consumer
HeiQ launched the new antiviral textile technology HeiQ Viroblock on March 16, 2020 – two hours after Switzerland declared a state of emergency. This was made possible with the indispensable support of Swiss research Partner FHNW and the EPFL which helped accelerate product validation. The fast scale-up of production was enabled by the FHNW School of Life Sciences with their new Process Technology Center (PTC) by special permit. With its agile operations and global footprint, HeiQ also brought HeiQ Viroblock face masks and other PPE (personal protection equipment) to different corners of the world where are needed. Now, Swiss consumers can also acquire HeiQ Viroblock enhanced face masks online.

Reacting to the news of HeiQ Viroblock winning this year’s Swiss Tech Award, Co-founder and CEO Carlo Centonze says: “I am both amazed and honored that HeiQ has won this award a second time in just ten years, and from among some incredible tech innovation finalists. It confirms our resolve to push the boundaries and push innovations to help the world with its most pressing and imminent problems. This award is recognition for our company and team that have spared no efforts to develop and launch HeiQ Viroblock at such speed and make a valuable contribution to the global pandemic efforts. We remain true to our mission: enhancing the everyday lives of people with smart and efficient textile effects.”

• An introspective and emotional journey of transformation
• The global leading jersey manufacturer launches a brand-new collection deliberately “raw”, a back to matter, materials and origins as individuals that are able to change and evolve.
   

Another big step of TINTEX Naturally Advanced Evolution

TINTEX has over time established itself as a global leader in smart innovation with its high quality, natural based responsible jersey fabrics using the latest and best sustainable high-tech dyeing and finishing processes, implementing expertly controlled processing to drive material innovation and manufacture a full range of natural based smart materials, optimizing superior and responsible fashion solutions.

The new collection confirms the Naturally Advanced Evolution vision as the right approach:  to work together in a deeper way - textile producers and fashion brands - to develop solutions, innovations with a strong environment-driven approach and cutting-edge technology able to offer contemporary consumer a brand new smart and performing choice.  As result, Raw is a true Naturally Advanced Evolution of the modern human being, explaining a story with no more genders and races, just focused on contemporary values.

The concept behind the AW 21/22 Raw Collection is turning back to nature and to our origins, a journey through emotional, spiritual and physical changes. Thinking about what’s happening around us as planet and individuals in an era of unpredictable challenges, we need to be creative reinventing us every day in different ways, aware of a new society and way of consuming where environment and human needs count.  A unique collection with three different approaches to mix together through a colour palette that goes from raw, dirty beige to a warm pinkish red and a false black-bluish gray.

fluidity, human, natural reconnection. An introspective journey where it’s all about ourselves and who we are. Through light and translucent fabrics, touches of peach and waxes in warm reds and burgundy, we find delicate, natural and extra light fabrics that flow on the skin to symbolically represent the inner fight from who we are and who we want to be. Organic cotton and Tencel™ Modal Micro processed in a special way, are at the center of this stage.
 
raw beauty, reuse, less is more. With this line, the company gives new life to existing articles, showing all the beauty of the raw material and the transformation they went through. This re-transformation of materials reflects the inner transformation; reborn of human beings, of time, of challenges through a new perspective where we reinvent ourselves, home, habits and planet. Our capability, skills to give new life to things it is not something we forgot through time. Organic cotton, Tencel™ Modal Micro, European hemp, Q-Nova® recycled polyamide and ROICA™ EF premium sustainable recycled stretch fiber are the materials boosting th experience.
 
timeless, versatile utility, urban. In a history of deep blues, with clean and dense touches, we come to acceptance, to a future where we relearn to live with what we already had. Organic cotton, Tencel™ Modal Micro and Texloop™ guarantee timeless performed articles, where the high-performance pairs to sustainable process especially at yarn level.

Freedom for ourselves, comfort, flexibility, movement are the concepts the company explores looking not only to sportswear market, but to all the markets where the most comfortable yet performing and responsible materials - from recycled synthetics to organic cotton - are the “right value choice”.

The Bavarian viscose speciality fibres manufacturer Kelheim Fibres has partnered with the European Technology Platform for the Future of Textiles and Clothing (ETP) in two strategic programs: “Bio- Based Fibres” and “Circular Economy”.

Against the backdrop of the increasingly important sustainability debate, fundamental changes inside the textile supply chain are taking place. The two three-year ETP programmes “Bio-Based Fibres” and “Circular Economy” are a clear response to this. The goal is to bring key players from industry and science together to develop a long-term strategy to actively shape the sustainable realignment of the European textile industry.

“We have been manufacturing bio-based fibres for almost 85 years – these fibres are made from the renewable material wood and they are fully biodegradable at the end of their product lifecycle. As an alternative to crude-oil based materials, these fibres are becoming increasingly popular in various applications. Part of the reason for this is the fact that we can functionalize our speciality fibres during the production process and give them the exact properties that are required for different end uses. In terms of performance, they can keep up with synthetic materials”, explains Dr. Marina Crnoja-Cosic, head of New Business Development at Kelheim Fibres.

But Kelheim’s sustainability criteria also include the full life cycle of their products: When a textile, after its use, can become the raw material for new fibres and new products, for Crnoja-Cosic that is a huge advantage in terms of sustainability. “We want the best possible result – bio-based fibres AND circular economy are the way to get there.”

In a roundtable discussion during the recent Innovate Textiles & Apparel (ITA) textile machinery exhibition, imogo Founding Partner Per Stenflo and representatives from a number of like-minded European companies discussed the opportunities for new spray application technologies for the dyeing and finishing sector.

These technologies can achieve tremendous savings for manufacturers compared to traditional water-intensive processes it was explained at the event, held online from October 15-30th.

Pioneer
imogo – one of the latest companies to join TMAS, the Swedish Textile Machinery Association – is one of the key pioneers in this area with its Dye-Max system. Dye-Max spray dyeing technology can slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. This is due to the extremely low liquor ratio of 0.3-0.8 litres per kilo of fabric and at the same time, considerably fewer auxiliary chemicals are required to start with.

Obstacles
Such technologies, however, face a number of obstacles to adoption and during the ITA discussion it was agreed that 2020 has not provided the ideal climate for adventurous investors. “The textile industry is quite conservative and is definitely in survival mode at the moment and it is not the time to be a visionary,” said Stenflo. “Day to day business is about staying alive – that’s the reality for many of our customers.” Nevertheless, all of the panellists agreed that sustainable production will remain top of the agenda for the textile industry in the longer term and spray technologies for dyeing and finishing processes will be a part of it.

“Any investment in something new is a risk of course, and we have to be able to explain and convince manufacturers that there’s a good return on investment, not only in respect of sustainability, but in terms of making good business sense,” said Stenflo. “Here we could use the help of the brands of course, in putting pressure on their suppliers to be more sustainable. Governments also have a role to play, in providing incentives for producers to move in the sustainable direction. Sustainability alone will never cut it, there has to be a business case, or it won’t happen.”

Marketing
The marketing of sustainable new fibers is comparatively easy for the brands compared to explaining the difficult textile processes and the chemistries involved in fabric and garment production, he added.

“These fibers, however, currently go through all the same dirty processes that we need to get away from, so it must happen,” he said. “In developing our technologies, it has been important for us to avoid disrupting existing supply chains, stick with using off-the-shelf chemistries and dyes, and involve the dye manufacturers who are an essential part in how operations are driven today. “In fact, collaboration across the entire textile supply chain – from the brands right back to the new technology developers – is essential in moving the sustainability agenda forward.

Business models
“We are also looking into new business models in terms of how to reduce or lower the thresholds for investment and minimise the risk for the manufacturers who are looking to be the innovators,” he concluded. Also taking part in the ITA roundtable discussion were Simon Kew (Alchemie Technology, UK), Christian Schumacher (StepChange Innovations, Germany) Tobias Schurr (Weko, Germany), Rainer Tüxen (RotaSpray, Germany) and Felmke Zijilstra (DyeCoo, Netherlands).

European innovations
“It’s fantastic that all of this innovation is taking place in Europe based on established know-how and forward thinking,” said TMAS Secretary General Therese Premler-Andersson.

“Spray application technologies are a perfect illustration of how new digital technologies can lead to more sustainable production, in this case by replacing water-intensive processes with the highly precise and controlled application of dyes and chemistries as vapour.
“There was a major project by the Swedish research organisation Mistra Future Fashion recently, involving many brand and academic institute partners. The project’s Fiber Bible 1 and 2 reports conclude that it’s very difficult to make assumptions that one fiber is better than another, because it’s so much about how fabrics and garments are being produced from them. The study also found that 55% of the chemicals used in a garment comes from the dyeing. This is where a number of TMAS companies can make a difference.
“An organic or recycled cotton t-shirt is not automatically more sustainable than a conventional cotton t-shirt, or even one made from synthetics – the alternative fibers are a good start but you have to consider the entire life cycle of a garment, and that includes the smart technologies in textiles production.
“TMAS members – backed by Swedish brands and advanced research institutes – are playing an active part in pushing forward new concepts that will work, and I have no doubt that digitalisation now goes hand in hand with sustainability for the textile industry’s future.”          

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

*Please see attached document for more information.

• Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced that, for the first time, Dyneema® Composite Fabrics are used by Moncler in the Fall/Winter 2020 Grenoble collection, which fuses form and function into high performance skiwear.

Moncler Grenoble is born of a passion for research and implements cutting-edge technology to push the limits of its potential. The design team identified Dyneema® as an innovative fabric it could use to push the level of its performance to the next peak, incorporating the material into the new collection as a departure from the conventional use of cotton and polyester.

Sandro Mandrino, the Head of Design for Moncler Grenoble, was the first designer of the luxury fashion brand to incorporate Dyneema® into one of his creations through the Moncler Genius project. The Moncler Genius project advocates radical co-creation where multiple designers create their own signature collections in collaboration with the house. Together, these collections translate into one vision of the future and, as one of the nine designers, Mandrino’s interpretation of the future of fashion features Dyneema® Composite Fabric.

Using variations of the fabric in both white and black allowed Mandrino to bring his vision to life by merging skiwear, space suits and technology all in one. “ 3 Moncler Grenoble is first and foremost about performance,” states Mandrino, who integrated constructive solutions with fabric technology to develop a line that was meant to perform both on and off the ski slopes.

Dyneema®, the world’s strongest and lightest fiber, is 15 times stronger than steel yet light enough to float on water. The unmatched performance and protection of products made with Dyneema® have made it the material of choice in critical applications where failure is not an option for more than 30 years. In fabric form, Dyneema® is available in composites, denim, knits, wovens and hybrids for composite reinforcements. And because Dyneema® fabrics are made using Dyneema® fiber, they intrinsically provide high strength, low weight, waterproof and breathable properties – allowing designers to fuse the technical performance of ultra-light products with aesthetic design that doesn’t sacrifice strength or durability.

The Moncler team used the Grenoble collection as an opportunity to experiment and further understand the nature and behavior of Dyneema® fabrics, while simultaneously incorporating material performance with practical design. “Future collections will focus on expanding to new designs and fabric options in collaboration with DSM,” adds Mandrino.

“We are very excited to be working with the Moncler team to launch a collection of wonderful garments that allow people to explore the outdoors more safely and for longer periods of time,” states Marcio Manique, Global Business Director, Consumer & Professional Protection, DSM Protective Materials. “We look forward to further supporting Moncler as they develop innovative, high-tech garments that are also sustainably sourced through the introduction of bio-based Dyneema® fabrics.”

In line with DSM’s commitment to protect people and the environment they live in, the world’s first-ever bio-based ultra-high molecular weight polyethylene fiber was introduced in May 2020. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE. DSM and Moncler’s continued partnership will not only provide high performance, light weight garments for outdoor enthusiasts but also environmentally sustainable alternatives that contribute to a more circular economy.

• Lakmé Fashion Week 2020
• Bemberg™ fibers empower “Tattva”
• Hemang Agrawal's new craft-tech collection

Smart tech fibers, contemporary style and heritage. Past, present and future are intertwined in the new ‘Tattva’ collection by famous Indian designer Hemang Agrawal who has teamed up with Bemberg™ by Asahi Kasei, the Japanese yarn manufacturer leading in both high-performative innovation and sustainability. The collection comprises textiles entirely conceived and created by the designer. A new chapter for Bemberg™ glamorous uniqueness for high-end fashion, first Japanese reality that participated at Lakmé Fashion Week 2020, the biggest fashion event in India.

Made from the smart-tech transformation of cotton linters pre-consumer materials and converted through a traceable and transparent closed loop process, Bemberg™ fibers add responsible values to the collection, matching perfectly the vision and the ethic of Hemang Agrawal, a designer with more than one eye on sustainability, innovation and deep knowledge and respect for traditional Indian crafts and culture.

Tattva debuted at the Lakmé Fashion Week 2020 and comprises 40 exquisite pieces for men and women, all inspired by the 12 Tattva – the natural elements bringing harmony in the universe, according to the Indian scriptures and tradition. Motifs representing these elements, including quirky versions of moon-phases, tigers, human mind & DaVinci’s Vitruvian man were woven into the glittering fabrics. The collection was crafted harnessing the skills of Indian handlooms artisans in the designer’s hometown Benares (Varanasi).

Tattva featured Bemberg™ brocades as the predominant textile, along with plain Bemberg™ fabrics and a few blends. The result is a magnificent touch, fabrics are distinctively smooth like silk, second skin-like, shining, and bright. On top of that, Bemberg™ yarns add a new dimension in terms of sustainability and comfort by boosting antistatic and breathable performances, amazing precious touch while being also biodegradable and compostable.

“We are so happy that we participated in LFW and collaborated with Hemang Agrawal.” Says Mr. Hideto Tanimoto, General Manager, Bemberg™ Sales and Marketing Department. “The collection has come out really wonderful and has brought out the properties of Bemberg yarn such as noble sheen, smooth and soft touch, bright colour, supple drape amazingly. I strongly believe that the collection made significant impact on the sustainable fashion scene in India. We are expecting that the collection will be successful commercially and will help the local craftsman from Varanasi.”

The collection blends crafts and technology, Indian tradition and Japanese innovation, sustainability and high-end style. Designer Hemang Agrawal says, “The dexterity which the weavers in Benares have acquired, finds few parallels in the world. Although predominantly a silk-weaving centre, many master-weavers in the city are highly skilful in handling different yarn types. Japan, on the other hand, is well-known for its advanced technologies as well as its approach towards environment and sustainability as a country. Both these facts are well-reflected in the Bemberg™ Yarn”

“During our R&D, we found that the yarn, which is available in various counts and deniers is highly adaptable. The lustre, hand-feel, strength and colour depth are very well-suited for premium textiles, which come out of our looms. For the collection ‘Tattva,’ our endeavour has been to merge the skill-set of Benares weavers with qualities of the Bemberg™ yarn, to create textiles and apparel, which transcend the boundaries of what is termed as traditional Benarasi."

With the Tattva collection Hemang Agrawal and Bemberg™ by Asahi Kasei show a new way of making fashion: merging craft & tech, cutting-edge materials and deeply rooted traditions. A stunning collection marking the rise of craft-tech, a trend going beyond the dichotomy of ancient and new, injecting the human-based into the high-tech and a futuristic imprint into heritage. Like the 12 Tattva, a new harmony takes shape, intertwined into exquisitely stylish garments.

• New level of transparency in the textile industry
• Building on several successful pilot projects with TextileGenesis™, the digital platform for the traceability across the textile supply chain has now been introduced.

The Lenzing Group, a leading company in the area of wood-based specialty fibers, celebrates another milestone on the way to making the textile and apparel industry more sustainable and transparent. Since 2019, Lenzing has been using the blockchain technology powered by the Hong Kong start-up TextileGenesis™ to ensure the traceability of textiles from fiber to production and distribution. After several successful pilot projects, the digital platform was launched on 5 November for TENCEL™ and LENZING™ ECOVERO™ branded fibers. The platform provides customers and partners as well as consumers with an overview across the entire textile supply chain.

With the COVID-19 pandemic, more changes have been brought to the already transforming fashion and textile industries. To date, supply chain traceability has become a top priority for apparel and home brands. With the blockchain-enabled supply chain traceability platform powered by TextileGenesis™, Lenzing supports the entire supply chain in meeting the increasing demand for transparency and sustainability.

Phased onboarding and new digital certificates

A follow-up of a 12-month pilot program and field trials with four leading sustainable brands (H&M, ArmedAngels, Mara Hoffman and Chicks) and supply chain players from 10 countries in three regions, the global roll-out of Lenzing’s blockchain-enabled supply chain traceability platform will be conducted in phases. During the first phase, Lenzing’s supply chain partners based in South Asia (India, Bangladesh, Pakistan and Sri Lanka) will complete the onboarding process within Q4 2020. An estimated 300+ supply chain partners in China and Turkey will also join the program in Q1 2021. It is estimated that by Q2 2021,  most eligible Lenzing supply chain partners will be onboarded into the platform, ensuring full supply chain traceability.

One of the core components of the platform powered by TextileGenesis™ is integration with the Lenzing EBranding fabric certification system, which allows brands and retailers not only to access the full supply chain traceability for TENCELTM and LENZINGTM ECOVEROTM branded fibers but also to view the results of forensic (physical) verification of fabric samples via the digitally signed Lenzing E-Branding fabric certificates. “

Over the past year, during the pilot program and field trials we have been receiving very positive feedback from brands and supply chain partners. Our brand partners have also been encouraging us to accelerate the global roll-out for traceability of Lenzing fibers. With this new system and the integration with Lenzing E-Branding fabric certificates, the entire Lenzing ecosystem will create an unprecedented level of transparency. This will provide consumers with the most sustainable and climate-friendly clothing and home textile products that are made of TENCEL™ or LENZING™ ECOVERO™ branded fibers”, says Robert van de Kerkhof, Chief Commercial Officer and Member of the Board at Lenzing.

“With increasing compliance and reputational risks, CEOs and Boards of top 100 fashion brands have committed to using 100% sustainable and traceable fibers over the next 5 years, with transparency being a core part of business priorities. Sustainability and traceability are two sides of the same coin, and it’s great to see Lenzing paving the way for the entire fashion industry to follow. Our supply chain traceability platform will create digital accounting for Lenzing’s innovative and sustainable fibers across the entire supply chain using Fibercoins™ traceability technology”, says Amit Gautam, Chief Executive Officer and Founder of TextileGenesis™.

Fibercoin™ technology to ensure traceability across supply chain

Through using the innovative Fibercoin™ technology of the TextileGenesis™ platform, Lenzing and other brand
partners are now able to issue digital tokens (blockchain assets) in direct proportion to the physical shipments of TENCEL™ and LENZING™ ECOVERO™ branded fibers. These digital tokens provide a unique “fingerprint” and authentication mechanism, preventing adulteration, providing a more secure, trustworthy, digital chain-of custody across the entire textile supply chain, and most importantly, ensuring the materials are sustainably produced.

• Technology webtalk on sustainable denim production

The next VDMA technology webtalk is scheduled for 12th November 2020 (2 pm - 4 pm CET). The topic will be “Sustainable denim production: latest finishing technologies”.

The presenters and their topics at a glance:

Volker Kunzmann, FONG’S EUROPE, will present highly efficient and innovative wet finishing solutions for denim by combining modular systems adapted to the product and customer’s and local specifications.

Hans Wroblowski, A. Monforts Textilmaschinen, will speak about advanced denim finishing technologies with a focus on ecological and economical energy consumption. Furthermore, a new yarn dyeing process will be presented.

Dr. Jürgen Thoms, PLEVA, will present online measuring and control devices for sustainable and cost-effective denim finishing. Latest technologies in straightening, preskewing, moisture management and quality reporting are shown.

After the presentations, the three experts will be available to answer the participants' questions. Free registration is still possible.