From the Sector

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

China is the world's largest producer and exporter of nonwoven fabrics, as well as having the largest consumer market for products made from nonwovens, making the upcoming biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil) the place to be for industry players from 3 – 5 June. This year’s event will relocate to a different venue, the Shanghai Convention & Exhibition Center of International Sourcing, located conveniently between Hongqiao airport and downtown Shanghai.

“The nonwovens market has been one of the fastest growing sectors of the Chinese textile industry over the last decade, and we expect this to continue in the coming years,” Wendy Wen, Senior General Manager of the fair’s co-organiser, Messe Frankfurt (HK) Ltd, commented. “The demographic changes, evolution of the manufacturing sector and greater awareness of environmental protection that have driven growth in China, among other factors, are also evident in a number of markets in the region, particularly Southeast Asia, so we anticipate production growth will remain strong to meet export demand, even if the Chinese economy slows further.”

Reports by the China Nonwovens & Industrial Textiles Association (CNITA), the Freedonia Group and Smithers Pira support this. Nonwovens output in China grew year-on-year by 9.67% for the first 11 months of 2018, exceeding the corresponding figure for 2017 of 8.71%, while demand for nonwovens is predicted to reach 4.9 million metric tons in 2022, a 6.9% per year increase over this period.

Turning to the region, in 2015 Asia occupied 43.1% of the global nonwovens market – with China alone accounting for more than half of the share – with this figure expected to increase to 47.1% in 2020. The Freedonia report also notes that healthy growth in markets nearby to China such as India, Indonesia, Malaysia, the Philippines and Vietnam will also fuel nonwovens output in the country to meet export demand.

Globally, nonwovens demand is expected to increase 4.4% per year to 12.2 million metric tons in 2022, with developing regions being the main driver of this, in particular within Asia-Pacific. In the PP nonwovens sector, output is predicted to nearly double between 2013 and 2020, with the major drivers of this growth being baby diaper, adult incontinence and feminine hygiene products. In the durable nonwovens sector, annual growth of 6 to 7% for the period 2017 – 2023 is also anticipated for filtration, engineering construction and packaging uses.

Belgian firm to highlight health & wellness solutions at the Heimtextil show in Frankfurt
Devan Chemicals NV, the Ronse-based developer of finishing technologies for textiles, plans to showcase some of its latest health and wellness solutions at the upcoming Heimtextil trade show in Frankfurt, Germany. Heimtextil, the world’s largest international trade fair for home and contract textiles, takes place this Jan. 8-11 at the Messe Frankfurt, where Devan will occupy Booth B28 in Hall 11.0. Millions of people suffer from insomnia, insufficient sleep or other sleep disorders. Revitalising the body through sleep is vital for all. To help, Devan has now added cannabidiol, or CBD, to its R-Vital™ sleep-promoting range of microencapsulated active ingredients that enhance textiles with anti-oxidative effects. This rich CBD tincture or extract has a balancing effect that helps facilitate a good night’s sleep.

As the tradition goes, twice a year the functional fabric fair Performance Days selects the most innovative fabrics, accessories and finishes for their Performance Forum. This year, two functional finishes from textile innovator Devan Chemicals (Moov&Cool® & R-Vital™) were chosen. R-Vital™ was awarded with the ‘100% Jury Like’ stamp, meaning all the members of the Jury selected the sample, a recognition only granted to a handful of the 1400 applications.

R-Vital™ – ‘100% Jury Like’
R-Vital™ is a range of microencapsulated active ingredients that boost textiles with anti-oxidative effects. The microcapsules, attached to the fibre, deliver antioxidants to the body upon friction. The ‘100% Jury Like’ sample is treated with a well-chosen blend of Ubiquinol (Q10), Sea kelp and Thyme oil, which enhances recovery after sports performances. As R-Vital™ is also suitable for other market segments, such as bedding textiles, Devan enables its customers to compose their own blend, allowing them to create truly unique products and hence properties.
Marleen Van der Auwera, BU Manager Health & Wellness is happy to see that R-Vital™ is getting some more attention. “When the technology was first launched about a year ago, we noticed people had some difficulties understanding the concept because it was so revolutionary to them”, she says. “But this recognition really indicates more and more people are seeing its potential.”

Moov&Cool®
Moov&Cool® is a patented polymer technology, providing a cool comfort feel through a combination of durable heat absorption capacity and a unique, balanced moisture transfer system. By lowering the body core temperature, the finishing treatment helps professional athletes to take their performance to the next level. Furthermore, the technology is also designed to enhance comfort during physical activities of recreational athletes.
Moov&Cool® was first launched at Performance Days in April and will be presented in full detail at the upcoming edition, which will take place on November 28^th & 29^th in Munich, Germany.

Following the success of Trevira GmbH’s joint booth concept at Heimtextil 2018, the company will be expanding its plans next year. At the 2019 Heimtextil, due to take place from 8-11 January in Frankfurt, Trevira be presenting a new joint booth. At over 2000 msq, the new booth in Hall 4.2 will be significantly larger, up from 1300 msq in 2018, and next year will also see an increase in the number of major customers joining Trevira at Heimtextil, from 16 this year to 22 in 2019.

Trevira has expanded its fair booth concept for 2019. Together with 22 of its biggest customers, the manufacturer of high-quality, flame retardant polyester fibres will tell the story of the entire textile value chain. Starting with the basics - fibre production and yarn manufacture – the exhibition will then move on to show the colouring, weaving and warp and weft knitting stages, eventually taking the visitor right up to the textile editing. Meanwhile, Trevira’s customers will reveal their Trevira CS collections for home and contract textiles at individual stands, demonstrating their contribution to the value chain. Visitors will catch a glimpse of the complex and complicated world of textiles manufacturing, while also gaining an insight into how polyester fibres are transformed into attractive, functional fabrics conveying true visual and sensory appeal along with authentic value.

Trevira GmbH’s CEO, Klaus Holz said: “The overwhelmingly positive market response to our joint booth at Heimtextil 2018 showed us that we are moving in the right direction, and we will continue to build on this concept in 2019, working together with an even larger group of Trevira CS customers to create a shared exhibition space displaying the entire textile value chain.”

• For the first time @Interfilière New York edition, the award winning Interfeel’Award Sustainability ILUNA Group with ROICA™ by Asahi Kasei
• Interfilière New York, 17th–18th October 2018, booth 113

In line with the powerful global trend towards smarter fashion solutions, Iluna Group launches its Embroidery Division. Specialists in lace since 1985, the new Embroidery Division offers a complete and innovative product match in line with the modern expectations of brands and retailers. Staying true to Iluna’s DNA, the introduction of emb roidery and guipure are all produced with only recycled materials.

In addition to the launch of the Embroidery Division, this season novelties include:

1. Since  September  2018,  Iluna  Group’s  products with the right percentage of transformed content are GRS (Global Recycled Standard) certified.

2. Of  major  interest  today,  the  launch  of eco - velvet lace  entirely made  of  sustainable  materials  including ROICA Eco - Smart™  Family, Tencel™ Lyocell and  Q - Nova® .

3. Within  the Black  Label  collection,  the  Ultralight series  is  enriched  with  new  multicolor geometric  and floral galloons and allovers: here Iluna changes the color of  the  thread  not  only  in  the background,  but  also  in  the design,  the  same  article  reinvents  itself  in a  variety  of great visual impact.

4. Green   Label   collection, the   Iluna   dedicated range featuring a new responsible approach in respect of the  planet  and  people, able  to deliver  innovation,  beauty and quality, at 360°. In addition to the all over, jacquard, double jacquard and mesh offer, the line is also featuring new stretch Galloon laces fully made with GRS certified recycled materials,  including  the  stretch  thanks  to the introduction of the  unique ROICA™ sustainable yarn part of the ROICA Eco - Smart™ Family.

5. ILUNA has  strategically  included  in  all  their  stretch  laces  only ROICA Eco- Smart™  Family of sustainable yarns since some time.

6. ILUNA can also boast its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification  that  clarifies  and  communicates  the  company’s  sustainable  production  commitment. In
addition to this, all products are Oeko - Tex 100 certified.

7. ILUNA has  created  the  new e- shop offering  its  exclusive  materials  to  smaller companies   looking   for   added   values   as: creativity,   innovation,   made   in   Italy   and responsibility.

8. The  whole  collection  is  also  visible online at  its  web  site,  previous  registration, and   orders   can   be   done   directly   online always aiming to customers care.

Nevertheless, for ILUNA smart innovation is not   just   a   project even,   its   space at Interfilière will  be  the stage  where visitors will have  the  opportunity  to  discover the new  collection and to also  to experience and  touch latest boundaries  of  lace smart innovations.

Today ILUNA represents the largest European lace producer, and thanks to its journey toward the most contemporary  way  to  innovate  that  includes  responsibility,  has  also  become  a  reference  point  in  the
international market for a lace offer that is beautiful, innovative and responsible at the same time.  An  alchemy  of  design  and  sustainable  innovation, the  only  eco-fashion  line  that  includes  lace  and stockings,  capable  of  combining  ethics  and  high  quality  standards  with  a  fashion  image  of  bright  and deep colors.

• September 19, 20, and 21, 2018
• This September visit Première Vision’s Smart Square for a great opportunity to meet and greet ROICA™ experts to discuss responsible innovation and well-being.

ROICA™ experts showcase the world-first ROICA™ Eco Smart family that offers 2 responsible made yarns: a GRS (Global Recycled Standard) version 3 certified yarn and the world’s first yarn awarded Cradle2Cradle Material Health Gold Level Certificate and Hohenstein Environment compatibility certification.

On display in the Smart Square, a 800-sq. m. area dedicated to shed light on a new generation of values combining creativity, innovation and sustainability, is a  unique  range of ROICA™ Eco-Smart family based fabrics, the world's first responsibly made premium stretch fibers creating ROICA™ smart yarns that offer sustainable solutions with impressive certifications:

• Global Recycled Standard (GRS) certified by Textile Exchange - ROICA™ constructed with more than 50% pre-consumer recycled content.
• Cradle to Cradle Certified™ Gold Level for Material Health product and ingredients - ROICA™ yarn evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

ROICA™ experts empower attendees with knowledge, and inspire creativity as they demonstrate ROICA™ Eco-Smart family functionality. Engage the experts in the Smart Square, ask questions and learn about the company’s ongoing commitment to responsible innovation. At the corporate level, ROICA™ has achieved the following certifications: Oeko Tex 100, ISO 14001:2004, ISO 9001:2008. Moreover, ROICA™ mills in Germay achieved the certification of ISO 50001:2001.

ROICA™ partners exhibiting at Première Vision Paris presenting ROICA™ Eco-Smart family:

• Fukui Warp Knitting CO.,LTD  (JP) Hall 6 booth H15
• Iluna Group S.p.A (IT) Hall 5 booth N14 P13
• Jackytex (IT) Hall 5 booth M24 N23
• Lanificio Europa (IT) Hall 6 stand D12, F49
• Maglificio Ripa S.p.A. (IT) Hall 5 booth 5P29
• M.I.T.I. Spa (IT) Hall 6 booth G19
• Penn Textile Solutions GmbH / Penn Italia (DE/IT) booth 6G17
• Sofileta (FR) Hall 6 booth H18 6J13
• TINTEX Textiles (PT) Hall 5 booth N56

Additional ROICA™ partners at Première Vision also exhibiting a wide-range of other ROICA™ specialties:

• Eusebio (IT) Hall 5 booth 5P34 5R15
• Kurabo Industries LTD (JP) Hall 6 booth C20 D21

Lastly, on Friday 21st September 2018, at 1.30 pm, you are invited to join Dr. Stephan Hütte at Première Vision Smart Square as he facilitates an open discussion with exhibitors and introduces the audience to ROICA™ Eco-Smart family. Dr. Hütte will discuss ROICA™ textile innovations for contemporary consumer within the fashion, lingerie and activewear markets.

Recognizing Asahi Kasei for spearheading the premium stretch market, the Dorbinbirn-GFC Global Fiber Congress has invited Dr. Stephan Hütte, Development Manager ROICA™ Fibers at Asahi Kasei to present ROICA™ Eco-Smart family at this year’s congress. The Europe-centered innovation platform for the fiber industry is a distinguished idea and network generator hosting top-ranking international experts in fiber innovations. The event includes 700 participants from 30 nations and will take place September 12th through the 14th in Austria.

Last but not least, at Première Vision ROICA™ is proud to welcome Shinichiro Haga, Senior Executive Manager - ROICA™ Division. The company also announces an internal appointment: Mr. Hiroaki Shinohe elected as Chief Marketing Officer for European market.

The Autumn Edition of Intertextile Shanghai Home Textiles will open today, returning as a major event for big-name players in the domestic and international home textile industry. Covering six halls, it will accommodate around 1,040 suppliers from around 30 countries & regions. With 40,000 visitors expected to attend, including import & export corporations, wholesalers, distributors, chain stores and home product manufacturers, the fair is anticipated to be an ideal platform for suppliers to introduce new products to the market.

Suppliers set to seize market shares in China’s revitalised home textile market
China’s home textile market has been growing steadily, with both domestic and overseas suppliers determined to take advantage of Intertextile Shanghai as a platform to gain market share. This year, premium editors from China, including Beijing Xinyada, Beijing Euroart, Jasonite, SATI and Hangzhou Antex, will be showcasing their high-end collections while international contract business suppliers, such as JAB Anstoetz and Morphrow, are also present to cater to the growing demand for their quality products.
In addition to a majority of local brands and four domestic pavilions from Shaoxing, Tongxiang, Haining and Yuhang regions, there will also be international country & region pavilions from Belgium, India, Pakistan, Taiwan and Turkey, showcasing their specialised products.

Around 1,040 exhibitors covering every home textile sourcing need
Growing middle and upper classes in China have seen consumers’ buying trends expand to buying combinations of items with particular design trends. Matching this trend, a number of whole home exhibitors that provide one-stop services, from selecting home textile products to giving home decoration ideas, have been reaping the benefits in recent editions of Intertextile Shanghai Home Textiles – and 2018 is set to continue reflecting this trend.

Around 1,040 exhibitors at Intertextile Shanghai Home Textiles will showcase a wide variety of home textile products, including bedding, bath, table & kitchen, curtains & upholstery, textile designs & technology, whole home, sun protection, wall coverings and carpets & rugs. This diverse range of offerings establishes the reason why Intertextile Shanghai attracts genuine, high-quality buyers – across the spectrum, there’s something for every buyer at this fair.  

Fringe programme events to provide insight and inspiration
Intertextile Shanghai Home Textiles aims to provide inspiration for the next season at the same time as providing a platform for business interactions. At this edition’s fringe programme, key events include the InterDesign – Trend Area, displaying three key trend themes for A/W19 in collaboration with the international trendsetter NellyRodiTM Agency. Trend tours and forums will also take place, giving visitors the opportunity to learn and discuss lifestyle trends with designers and trend experts.

At Contract Business 360o, the fair will feature a showcase area at hall 5.1 displaying quality contract upholstery from leading exhibitors, and seminars on current design and market insights of the contract business sector. Catering to popular demand is the return of the Digital Printing Micro Factory, demonstrating a complete production process onsite, alongside forums on the benefits of digital printing & latest production technics. The Andrew Martin International Interior Design Summit will see a forum of experts share their design insights in the new information era, whilst the 2018 Home Furnishing Crossover Exhibition will demonstrate design talent and creativity of interior designers, and present new home living styles.

The show will be held from 27 – 30 August in the National Exhibition and Convention Center in Shanghai. Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

Asia’s largest biennial event for the entire technical textiles and nonwovens sector will feature some of the industry’s biggest overseas machinery brands. Held on the earlier date of 4 – 6 September this year, the fair will feature an expected 500-plus total exhibitors from around 20 countries & regions.

As the world’s largest producer of technical textiles and nonwovens, China’s demand for production machinery is insatiable. As such, this September’s Cinte Techtextil China has attracted some of the world’s leading machinery brands, particularly in the nonwovens and sewing machinery sectors, ensuring a wide range of sourcing options for both domestic and international buyers.

Overseas producers respond to strong Chinese demand
As the Chinese domestic and export markets’ demand for quality technical textiles and nonwovens products continues to increase, overseas machinery brands continue to enter the country, using Cinte Techtextil China as their starting-out platform. ANDRITZ Nonwoven is just one of those who see the growing potential. “Chinese nonwovens manufacturers are increasingly requiring higher capacities and top-class quality for their nonwovens products for local and export markets,” Mr Laurent Jallat explained. “China is the biggest market in terms of installed capacity, and shows quite promising potential for the future. In the past years, we’ve seen rapid growth in products such as disposable face masks.” ANDRITZ responds to this demand with their neXline spunlace eXcelle line which features state-of-the-art TT card web forming and JetlaceEssentiel hydro entanglement units for high capacity and speed.

The DiloGroup also report an increase in demand for their products in China. “China is one of our biggest markets,” explains Mr Dominik Foshag. “We have procured huge orders from China, as Chinese customers are considering German technology more frequently nowadays. The visitor quality of Cinte Techtextil has been very good in this past, and we think this year’s fair will be also successful as we know many of our customers are going to visit.”

Oerlikon will introduce its spunbond technology to the Chinese market this year, and is expecting to conclude initial contracts at the fair due to increased demand for overseas products. “The Chinese market for nonwovens products is by far the largest and fastest growing national market. Chinese manufacturers are no longer satisfied with lower product quality, but want to exceed Western quality levels, for example. The products must now meet stricter customer requirements and legal standards, some of which are significantly higher than other international standards,” Ms Lena Kachelmaier said.

Truetzschler Nonwovens has also noticed this trend. Ms Jutta Stehr commented: “In the last two or three years, China became one of the pacemakers in the field of nonwovens used in beauty, skin care and hygiene applications. Asian markets have set new standards concerning quality in nonwovens. For instance, making disposable wipes from cotton fibres is a trend originating in Asia. The luxurious feeling of cotton combined with the requirement for eco-friendly products will further drive demand in China and elsewhere. Accordingly, Truetzschler Nonwovens anticipates more inquiries at Cinte Techtextil for its proven carding and spunlacing solutions for cotton nonwovens.”

Weaving machine supplier Itema has also noticed strong demand in China for products made in Italy. “Generally speaking, and especially for technical fabrics, imported machinery is highly evaluated and appreciated by Chinese customers. In recent years, Itema experienced significant growth in the sale of its Made-in-Italy weaving machines in China, and in other APAC countries. Imported machines are synonymous with quality and reliability, and we believe this positive trend will be constant in the future,” Mr Matteo De Micheli outlined.

Weaving machinery exhibitor highlights

• ANDRITZ Nonwoven: their specialty is technologies for drylaid, wetlaid, spunbond, spunlace, needlepunch and textile calendering. At Cinte Techtextil, they will highlight their aXcess product portfolio, which has been especially designed for medium-capacity production. ANDRITZ has developed this range to fit the demands of producers with medium-capacity requirements, particularly in emerging markets. It includes lines and individual machines for needlepunch, spunlace, wetlaid and calendering processes.
• Autefa Solutions: visitors to their booth will experience the company’s expertise as a full line supplier for carded- crosslapped needlepunch lines, aerodynamic web forming technology, spunlace and thermobonding lines. Their nonwovens lines meet customers’ requirements for quality web formation, bonding, active weight regulation and minimal maintenance.
• DILO Systems: a leader in the field of staple fibre nonwoven production lines, DiloGroup will present their latest developments at the fair, including staple fibre production lines, card feeding and cards and crosslappers & needlelooms.
• Oerlikon: they will showcase spunbond solution lines for the production of polypropylene geotextiles. According to the company, spunbond geotextile applications are on the rise as the market is increasingly demanding more efficient processes and products, which means the product requirements are often the same or greater, but with a lower raw material input. Spunbonds are progressively replacing classical carded nonwovens due to their technical and commercial benefits.
• Truetzschler Nonwovens: concentrating on solutions for producing a broad range of hygiene nonwovens including wipes at the fair, they will focus on thermobonding & spunlacing processes and the respective machinery, from fibre preparation down to winding.

Sewing machinery exhibitor highlights

• Itema: making their debut at Cinte Techtextil, they are a leading supplier of weaving machines for technical fabrics production. According to the company, they are the only weaving machine producer to offer technical textile manufacturers the top three technologies for weft insertion: Rapier, Projectile and Airjet.
• Picanol: they use their leading position as producers of weaving machines for other textile products to expand into machines for woven technical textiles by investing heavily in state-of-the-art technology, as well through the modular design of their machine platforms which allow them to serve different industry sectors effectively.
• Lindauer Dornier: featuring in the German Pavilion this edition, they offer a number of weaving machine varieties including rapier, air-jet, open reed weave (ORW) and more. Their rapier weaving machines have set the technological standard in the high quality wool textiles market for decades, and this quality will be on display at their booth with the DORNIER P1 rapier weaving machine.

Domestic brands to watch out for

In addition to these leading overseas brands, a strong line-up of Chinese machinery producers will also feature at the fair, including Changshu Weicheng Non-Woven Equipment and Shijiazhuang Textile Machinery.

The conference will focus on areas of high impact and growth potential, for example smart and intelligent textile coatings and laminates, digital printing and coatings, substrates and coated nonwovens.
Now in its 27th year, this will be the 19th in this established conference series which has become one of the most important meeting places for the global textiles coating and laminating industry.  Previously attending companies can be found on the conference website, where other details can also be located.

CALL FOR PAPERS
The core of the conference programme will be presentations by invited experts, but in order to give an opportunity for anyone with exciting and relevant ideas to present to a high-level international audience, a call for papers is being issued for contributions in the following areas, with emphasis on work that will impact the industry, now and in the future.  Suggested topics include the following:

• new developments in machinery and techniques such as bonding systems, developments in polymers, surface modifications, techniques for extreme properties etc.
• smart textile coatings and laminates
• technology for growth, eg nanotechnology, antimicrobial/antibacterial, green technology, developments in self-decontaminating etc.
• growth markets and applications such as solar/thermal, fuel cells, composites, medical/biotechnology, extreme materials etc.
• environmental issues
• disruptive technology - new developments that will potentially change the industry, such as digital printing, graphene and nanotechnology in membranes, and alternatives for PVC etc.