From the Sector

STAMFORD, Conn. – At this year's Paris Airshow [Le Bourget, June 17-23] Hexcel will promote a range of carbon fibers and composite materials used to manufacture high-performance weight-saving structures in civil aircraft, engines, helicopters, and space applications.

Visitors to the Hexcel stand will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® carbon fiber reinforcements. HiTape® dry carbon reinforcements were developed for the automated lay-up of preforms and to complement a new generation of HiFlow™ resin systems, producing high-quality aerospace structures using the resin infusion process. The reinforcements incorporate a toughening veil to enhance mechanical properties and meet the structural requirements for aerospace parts. The I-Beam was manufactured using C-RTM (Compression Resin Transfer Molding) and was injected with Hexcel’s RTM6 resin in a process taking less than five minutes.

Hexcel honeycomb saves weight and enhances stiffness in composite structures, and the company provides a range of engineered core solutions that enable highly contoured parts with precision profiling to be produced to exact customer specifications. A sample part made from aluminum FlexCore® that is CNC machined on both sides and formed and stabilized with both peel ply and flyaway layers of stabilization will be on display.

Another honeycomb innovation is Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.
Another Hexcel technology to benefit aircraft engines is HexShield™ honeycomb which provides high-temperature resistance in nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential reuse of material after a fire.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

Another area of expertise that uses HexTow® carbon fiber is additive manufacturing, where Hexcel uses PEKK ultrahigh performance polymers and HexAM™ technology to manufacture carbon reinforced 3D printed parts. This innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Later this year Hexcel will open a joint research and development laboratory in Les Avenières (Isère), France with Arkema to develop carbon fiber-reinforced thermoplastic prepreg tapes for aerospace, space and defense applications. A spool of thermoplastic prepreg tape will be on display on Hexcel’s stand to showcase this cost-effective technology that enables lightweight parts to be produced in faster production cycles for future generations of aircraft.

Hexcel’s stand is located next to Hexcel’s official distributor for aerospace products, Groupe Gazechim Composites. In 2018, Hexcel and Gazechim formed a joint venture, HexCut Services, to provide aerospace and defense customers with customized kitting services that include Hexcel’s innovative carbon fiber prepreg, fabrics and adhesives. Pre-cut kits save customers time and investment, reduce inventory and minimize material losses through scrap reduction.

STITCH & TEX EXPO - AFRICA EDITION, renowned as “Africa’s No. 1 Trade Fair for textile industries”, is gathering Over 1,200 exhibitors from more than 40 countries; with almost 90% of the available space already booked. The trade fair will occupy a space of 50,000 m² of exhibition space, and more than 40,000 trade visitors, delegates and buyers from all over the African continent are expected to attend the event.

STITCH & TEX EXPO - AFRICA EDITION will feature the new concept of organizing two consecutive trade fairs; The first trade fair is dedicated to garment processing technologies including Sewing, Embroidery, Fabrics and their Accessories; While the second is dedicated to textile processing technologies including Weaving, Spinning, Knitting, and Dyeing Machinery, Technologies and Spare Parts; The two events are held under the giant brand STITCH & TEX EXPO - AFRICA EDITION; and will be held in the prestigious venue Cairo International Conventions and Exhibitions Center- Egypt during the period 27 February - 1 March 2020 and 5 - 8 March 2020 successively.

For eight days, the brightest minds of the textiles technologies business will meet in Cairo to demonstrate the latest industrial know-hows; discuss up-to-date tendencies and set the perception for the future. STITCH & TEX EXPO - AFRICA EDITION calls attention to its superior ranking not only through its prominence with the global industry but also by addressing the current challenges being the performance scale for the entire value chain of the African textile industries Bustling, energetic and wide-ranging, STITCH & TEX EXPO - AFRICA EDITION is a premium multi-format event with a distinct commercial and business identity; where cutting-edge technologies, products, services and turnkey solutions are provided by global strategic players and technology makers to serve the ever - growing evolving textile markets of Africa.

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

Parts prediction
In addition, the digital twin system provides information on the individual wear parts of a system, such as, for example, converters or gears. “Operators and mill managers are informed by Smart Check sensors when maintenance or the replacement of key components will be required, well ahead of time,” explains Monforts Vice President Klaus A. Heinrichs. “Direct access to the integrated Monforts webshop allows users to instantly order such parts when they are needed, virtually preventing machine downtime.” On request, Monforts can also virtually monitor machine performance and pro-actively alert customers to the need for preventative action. In such cases, however, data is only ever called from the cloud by Monforts when customers have given their full consent, in the interests of data security. Data from Smart Check, for example, can even be used to analyse a system’s energy requirements, allowing machine operation to be optimised by tailoring production runs to the peaks and troughs of electricity costs.

C.L.A.S.S ‘takes action’ and shares the very smartest textile and material innovations available globally today as part of a carefully curated space to be unveiled at the 10th anniversary of the Copenhagen Fashion Summit. This two-day event will take place from the 15th - 16th May at The Copenhagen Concert Hall.

With education right at the heart of this unique presentation, C.L.A.S.S will share valuable insights and physical examples of some of the most sustainably responsible innovations available on the market today, empowering the next generation of designers as well as those from leading design houses, with the chance to experience first-hand how they might work towards a circular design economy.

Located within the Design Studio area, key members of the C.L.A.S.S ACTIVATE team will be on hand to share valuable insights gleaned from over 12 years of research and development within this area helping to provide visitors including new designers, start-up’s, and established designers with everything needed to make ‘smart’ choices that work vertically through the supply chain from merchandising right through to consumer facing communication campaigns. From trends, new R&D concepts, and the latest buzzwords, C.L.A.S.S has it covered.

First showing of game-changing technology at a European tradeshow includes the recently launched Kornit Atlas, Kornit Avalanche Poly Pro and Kornit Presto
Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, has announced details of its corporate presence at Fespa 2019 which will take place in Munich, Germany, May 14-17.

Kornit’s exhibit will focus on the game-changing technology that was unveiled in the beginning of the year and will now be on display for the first time in a tradeshow in Europe: the Kornit Atlas and the Kornit Avalanche Poly Pro. The presence will be complemented by a Kornit Storm HD6, a direct-to-fabric sample area featuring prints from Kornit’s upcoming Presto system and an installation of Colorgate’s Textile Production Server for Kornit.

The Kornit Atlas is a heavy-duty system created for super-industrial garment decoration businesses. It is designed to deliver a typical annual production capacity of up to 350,000 impressions, optimizing production efficiency and cost of ownership. The Kornit Atlas is aimed at highly productive garment decorators, mid to large size screen printers and innovative businesses looking to combine state-of-the art technology with lowest cost of ownership, making it easier than ever to address the requirements of leading and mid-sized brands, as well as new generation digital brands. The Kornit Atlas uses water-based Kornit NeoPigmentTM Eco-Rapid Inks which are eco-friendly, GOTS approved and OEKOTX certified, and serve as the main driver of the retail quality prints.

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect program, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.

Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories.

RCE2 carpet weaving
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.

The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds.

The filling enters the machine smoothly via the latest IRO X3 winders, heavy duty filling brakes with multi lamellas, an active yarn recuperator and a high speed weft mixer, where again, all tensions are set electronically. Vandewiele’s servo-driven heddle frames (Smart Frames) are meanwhile already well proven in the industry.

TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.

All of this would be unnecessary, if it didn’t result in allowing manufacturers to make the highest quality carpets at the most economic prices ever, with savings on the highest-bulk pile yarns from the Vandewiele extrusion lines, reduced waste yarns in the creel and industrial production speeds that have never before been attained.

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

At home, at work, on the street, in the sky, on the water, even in space, technical textiles and nonwovens are swinging towards ever higher performances in amazing applications. Versatile and light, but sometimes stronger than metal, these materials of the future gain their superpowers from the interaction of precisely coordinated textile systems. At Techtextil in Frankfurt am Main from May 14 to 17, 2019 in Hall 3, B06, Oerlikon will be showing chemical fiber applications made of polyester, polypropylene and Co. and what they can do in these fields. However, these exhibits are only a communicative means to an end, as Oerlikon is primarily interested in placing the associated machinery and plant solutions at the centre of discussions with trade fair visitors.

More than two thirds of all technical innovations are directly or indirectly based on new materials, says the German Research Ministry. One could add: The key to a more advanced world, for technological products with amazing functions, breathtaking performance and greater environmental benefits, is also to improve the properties and processing of materials. This applies first and foremost to textiles. Probably no other fabric is so strong as a "team player" who draws its strength from its cohesion. A single polyester thread, for example, looks inconspicuous. Processed into a thigh-thick special weave, however, high-strength High Modulus/High Tenacity fibers anchor floating oil platforms in the deepest waters. These kilometer-long "Mooring Ropes" withstand a breaking load of well over 1,000 tons and perform their task better than steel. For decades, Oerlikon Barmag has been offering special solutions for the production of so-called industrial yarns (IDY) that are tailored to customers worldwide. "We will once again be presenting numerous innovations at this trade fair to inspire our customers," explains Dr.-Ing. Dipl.-Chem. Roy Dolmans, Technology Manager IDY and R&D Filament Processing.

China is the world’s undisputed front-runner in the global car market, leading the way in both production and sales. 2018 saw 27.8 million vehicles produced and domestic sales of 28.1 million, and while these numbers were down slightly year-on-year, the opportunities for global textile producers are still unrivalled given the overall size of the market. These opportunities can best be explored at this year’s biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil), which runs from 3 – 5 June in Shanghai.
While CINE features nonwovens & nonwoven products, machinery for nonwovens and raw materials & chemicals for nonwovens for a wide range of applications, it is the potential in the automotive sector that is generating a lot of talk before this June’s event. And considering only around 50% of demand for automotive textiles is met by domestic output, the opportunities for imports from overseas suppliers is high.

While new car sales in China dropped for the first time last year since 1992, production still reached 27.8 million vehicles, including 23.5 million passenger cars and 4.3 million commercial vehicles. Furthermore, strong growth is still evident in new energy vehicle (NEV) sales, as well as exports of all vehicle types. NEV production totalled 1.27 million units last year, a staggering 60% increase, while sales grew by nearly 62%. More e-vehicles are sold in China than rest of the world combined, while the government recently set a target of selling 7 million e-vehicles by 2025, ensuring growth in this sector will remain robust for some time. Exports of all vehicle types in 2018 did not grow as fast as NEVs, but the 1.04 million vehicles produced for overseas markets last year still represented growth of 16.8%.

Premium automotive industry buyers attend CINE
Given CINE’s strong reputation in the Chinese nonwovens sector, a number of leading automobile brands, and textile suppliers to these companies, source at the fair. Previous buyers have included Autoliv, Honeywell, Johnson Controls, Lear Corporation, Lydall, Toyota Boshoku, Volkswagen, Wangbo Co Ltd and more.

This edition, buyers such as these can source from a range of automotive nonwovens suppliers. This includes Shanghai Shenda, one of the country’s largest producer of automotive textiles, who will group together a number of automotive interior suppliers.

This year the fair will take place in a new venue, the Shanghai Convention & Exhibition Center of International Sourcing, located conveniently between Hongqiao airport and downtown Shanghai. Visitor registration for the fair is now open and can be accessed here: http://vis.eastfair.com/CINEPCEN/reg.aspx.

For Oerlikon Nonwoven, the IDEA, taking place between March 25 and 28 in Miami Beach, Florida USA, kicked off with the signing of a contract. The customer, a renowned European meltblown specialist, invested in a two-beam, stand-alone meltblown system from the Neumünster-based plant manufacturer in order to meet its strongly increasing demand. In the future, the system will be deployed to manufacture meltblown nonwovens for various application, especially from the filtration and wipes sector. The commercial production launch is scheduled for the first half of 2020. The market for meltblown nonwovens is expanding by an average of 6% per annum.