From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
591 results
Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft (c) Hexcel Corporation
30.04.2020

Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

HexPly M79 prepregs can be cured at temperatures as low as 70˚C for eight hours or 80˚C for four hours, reducing tooling costs and increasing build rates. When combined with Hexcel’s innovative air venting Grid Technology, HexPly M79 UD carbon tapes can also be laminated with reduced debulking steps to produce void contents <1% irrespective of laminate thickness. With consistently low void contents and improved mechanical properties, designers and engineers are able to further optimize highly loaded composite aerostructures.

As more and more of its composite aircraft parts are transferred to prepreg technology, Flight Design is seeing the benefits of its switch to HexPly M79. Lay-up is cleaner and more precise, low temperature oven curing is quick and energy efficient, and the manufacturing process consistently outputs exceptionally high-quality laminates and components. The long-term strategy is to integrate HexPly M79 across the range, with Hexcel materials lightening the ultralight aircraft at Flight Design even further.

“The materials and technology package from Hexcel and Lange + Ritter has been a big success for us at Flight Design,” comments Daniel Gunther, Managing Director at Flight Design. “When we took the decision to switch to prepreg, we looked at many options but only Hexcel and Lange + Ritter could offer us low temperature out-of-autoclave (OOA) curing, globally respected material quality and the customer service levels we were searching for.”

Flight Design selects Hexcel’s HexPly® M79 Carbon Fiber Prepregs for Ultralight Aircraft (c) Hexcel Corporation
More information:
Aircraft Composites Hexcel’s HexPly® Flight Design
Source:

Hexcel Corporation

print close
more
24.04.2020

Lenzing AG and Palmers Textil AG found Hygiene Austria LP GmbH

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

The demand for high-quality MNS and respiratory masks for medical personnel is increasing rapidly, and there is real competition on the international market for these products. In order to sustainably secure domestic supply now and in the future and to strengthen the business location, the two companies Lenzing AG and Palmers Textil AG have now set a milestone with their own competence center for hygiene based in Austria.

Hygiene Austria LP GmbH thus makes a significant contribution to combating the Covid-19 pandemic and ensures the long-term supply of these critical goods in Austria in high quality.

More information:
Lenzing AG Palmers Textil AG face masks corona virus
Source:

Lenzing AG

print close
more
Logo oerlikon
Oerlikon blickt positiv in die Zukunft
23.04.2020

Oerlikon Manmade Fibers segment looking positively towards the future during the coronavirus pandemic

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Going against the flow
The Segment CEO, Georg Stausberg explains the reason: “Long before the coronavirus situation developed, the major manmade fiber manufacturers in China had decided to reverse-integrate their production chains to include petrochemicals in order to expand their portfolios with targeted investments, to reduce their dependence on a ,single product’, to optimize their costs and ultimately to acquire greater control over margins in a global volume business”.
Similar processes and decisions – albeit not on the same scale as in China – have also
been detected at the large manmade fiber manufacturers in India and Turkey. Even though businesses in India and Turkey are presently still temporarily severely impacted by the coronavirus situation, their long-term commitment cannot however be questioned, as the company-internally-agreed plans will be systematically implemented moving forward.

Long-term investments of global market players
All this has recently resulted in increased demand for spinning and texturing systems – just like those supplied by total solutions provider Oerlikon Manmade Fibers with its
Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven product brands.
“The investments in petrochemical systems are based on long-term strategic considerations and are resulting – even during the coronavirus pandemic – neither in short- and medium-term economic dips, nor in changed customer behavior. (...)”, states Segment-CEO Georg Stausberg.
As a result of Oerlikon Manmade Fibers delving into the digital age years ago, the segment has experienced the intensive and short-term benefit from all the measures, in part also in its processing of customer projects.

More information:
Oerlikon Coronavirus Chemiefasern Petrochemie
Source:

Marketing, Corporate Communications
& Public Affairs

print close
more
16.04.2020

Rieter Annual General Meeting 2020

  • All motions approved
  • Dividend of CHF 4.50 agreed
  • COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

  • All motions approved
  • Dividend of CHF 4.50 agreed
  • COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Michael Pieper, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office.
Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, the financial statements and the consolidated financial statements for 2019, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

COVID-19
At present, it is not possible to predict how the global COVID-19 pandemic will affect Rieter’s sales and earnings in the first and second half of 2020, and thus also for 2020 as a whole.

Rieter therefore refrains from providing an outlook for financial year 2020 and will issue the relevant information as part of the semi-annual report on July 16, 2020.
The company has taken the necessary measures to protect employees and to meet commitments to customers as far as possible.

Thanks to long-standing customer relationships, a focus on innovation, global positioning and the company’s financial stability, Rieter will successfully overcome the challenges.

More information:
Rieter Rieter Holding Ltd.
Source:

Rieter Management AG

print close
more
Beaulieu International Group and Greencare (c) Beaulieu International Group
Beaulieu International Group and Greencare
16.04.2020

Tessutica produces furniture upholstery from recycled marine waste

Beaulieu International Group (B.I.G.)’s Tessutica business is proud to announce a new product line in upholstery. Greencare fabrics are created from pellets that come from marine plastic waste. The fabrics themselves can then be 100% recycled into pellets again.

The new Greencare collection is made with 100% recycled and recyclable upholstery fabrics and is certified with the the Global Recycle Standard (GRS) label. The company used recycled yarns from regular post-consumer PET bottles from the oceans, landfills and upcycled cotton from garments.
For this, Tessutica partnered with the Seaqual project, which brings plastic waste back into the manufacturing chain. Through the recycling process there is no usage of new petroleum which decresases the CO₂  emissions significantly compared to the use of virgin polyester.

With growing demands for sustainability within the business world as well as from end-consumers, Tessutica felt it was the right choice to offer a product line that comes with a full guarantee of environmental consciousness.

 

Beaulieu International Group (B.I.G.)’s Tessutica business is proud to announce a new product line in upholstery. Greencare fabrics are created from pellets that come from marine plastic waste. The fabrics themselves can then be 100% recycled into pellets again.

The new Greencare collection is made with 100% recycled and recyclable upholstery fabrics and is certified with the the Global Recycle Standard (GRS) label. The company used recycled yarns from regular post-consumer PET bottles from the oceans, landfills and upcycled cotton from garments.
For this, Tessutica partnered with the Seaqual project, which brings plastic waste back into the manufacturing chain. Through the recycling process there is no usage of new petroleum which decresases the CO₂  emissions significantly compared to the use of virgin polyester.

With growing demands for sustainability within the business world as well as from end-consumers, Tessutica felt it was the right choice to offer a product line that comes with a full guarantee of environmental consciousness.

 

Beaulieu International Group
More information:
Sustainability Recycling Beaulieu International Group
Source:

EMG

print close
more
(c) GKD – GEBR. KUFFERATH AG
15.04.2020

GKD: Ofenbänder aus Glashybridgewebe für die Vliesproduktion

Für anspruchsvolle Thermobondingprozesse präsentiert GKD – Gebr. Kufferath AG (GKD) Glashybrid-Gewebebänder von hoher Prozessperformance und Produktqualität. Anwender wählen verstärkt den zunächst als magnetisches Oberband in Doppelbandtrocknern eingesetzten Bandtyp auch als Unterband. Die vollständig mit PFA beschichtete Konstruktion aus Glaslitzen in Laufrichtung und Metalldrähten im Schuss verhindert Anhaftungen. Dadurch sinken Reinigungsintervalle und Stillstände deutlich, während Fertigungsgeschwindigkeit und Standzeiten herkömmliche Maßstäbe übertreffen.

Mit einem Gewicht von nur 1,8 Kilogramm pro Quadratmeter ist die neuartige Bandkonstruktion, so GKD, ein energieeffizientes Leichtgewicht im Trocknerbetrieb. Zugleich steigere die Werkstoffkombination aus Metall und Glasfasern durch eine hochbeständige PFA-Beschichtung deutlich die Prozesseffizienz. Sie schütze– auch beim Einsatz von BiCo-Fasern – Drähte und Kreuzungspunkte von Kette und Schuss zuverlässig vor Anhaftungen.

Für anspruchsvolle Thermobondingprozesse präsentiert GKD – Gebr. Kufferath AG (GKD) Glashybrid-Gewebebänder von hoher Prozessperformance und Produktqualität. Anwender wählen verstärkt den zunächst als magnetisches Oberband in Doppelbandtrocknern eingesetzten Bandtyp auch als Unterband. Die vollständig mit PFA beschichtete Konstruktion aus Glaslitzen in Laufrichtung und Metalldrähten im Schuss verhindert Anhaftungen. Dadurch sinken Reinigungsintervalle und Stillstände deutlich, während Fertigungsgeschwindigkeit und Standzeiten herkömmliche Maßstäbe übertreffen.

Mit einem Gewicht von nur 1,8 Kilogramm pro Quadratmeter ist die neuartige Bandkonstruktion, so GKD, ein energieeffizientes Leichtgewicht im Trocknerbetrieb. Zugleich steigere die Werkstoffkombination aus Metall und Glasfasern durch eine hochbeständige PFA-Beschichtung deutlich die Prozesseffizienz. Sie schütze– auch beim Einsatz von BiCo-Fasern – Drähte und Kreuzungspunkte von Kette und Schuss zuverlässig vor Anhaftungen.

Weder Fasern noch Binder setzen sich in den Glasfaserlitzen oder zwischen den Drähten ab. Einen zentralen Beitrag zur Optimierung von Prozess- und Produktqualität leistet die hohe Querstabilität dieses Bandtyps: Auch bei großen Arbeitsbreiten oder starken Schrumpfkräften des Produktes überzeugt die einlagige Konstruktion durch exzellente Laufeigenschaften. Im Oberband gewährleisten über 0,8 Millimeter dicke, magnetische Schussdrähte aus Stahl durch die absolute Planlage des Bandes eine exakte Kalibrierung und Kompression. Beim Einsatz als Unterband sichert ein Schussdraht aus Edelstahl analoge Querstabilität. So erhalten auch hochvoluminöse und stark verdichtete Produkte über die gesamte Breite eine konstante Dicke und Dichte mit geringsten Toleranzen.

(c) GKD – GEBR. KUFFERATH AG
More information:
GKD GKD, Vliesstoffe, technische Textilien
Source:

impetus.PR

print close
more
25.03.2020

autoneum: Annual General Meeting: waiver of dividend for 2019 financial year

All proposals submitted by the Board of Directors were approved at the Annual General Meeting of Autoneum Holding Ltd. In view of the net loss in the 2019 financial year, a dis-tinct majority of shareholders agreed to the proposal to forgo a dividend payment.

In consideration of COVID-19 Ordinance 2 of the Federal Council, no shareholders were admitted to physically attend the Annual General Meeting on site. The Company therefore requested the shareholders in advance to transfer their votes to the independent voting proxy. He represented 59.8% of the total 4 672 363 shares issued.

All proposals submitted by the Board of Directors were approved at the Annual General Meeting of Autoneum Holding Ltd. In view of the net loss in the 2019 financial year, a dis-tinct majority of shareholders agreed to the proposal to forgo a dividend payment.

In consideration of COVID-19 Ordinance 2 of the Federal Council, no shareholders were admitted to physically attend the Annual General Meeting on site. The Company therefore requested the shareholders in advance to transfer their votes to the independent voting proxy. He represented 59.8% of the total 4 672 363 shares issued.

The shareholders approved the 2019 Annual Report including the consolidated and annual finan-cial statements. Given the significant net loss in the 2019 financial year shareholders approved the proposal submitted by the Board of Directors to forgo a dividend. Hans-Peter Schwald, Chairman of the Board of Directors, stressed: “Autoneum aims to distribute at least 30% of net profit attributable to Autoneum shareholders as dividends. Unfortunately, Autoneum did not generate a profit in 2019, mainly due to impairments. This development is unacceptable for both, the Group Executive Board and the Board of Directors, and together with the employees we are doing every-thing possible to get back on the road to success. Nevertheless, the Board of Directors and the Group Management will continue to adhere to their long-standing dividend policy and thus ensure that shareholders participate appropriately in the Company's success.”


Chairman Hans-Peter Schwald and the other members of the Board of Directors, Rainer Schmückle, Norbert Indlekofer, Michael Pieper, This E. Schneider, Peter Spuhler and Ferdinand Stutz, were confirmed in office. This E. Schneider, Hans-Peter Schwald and Ferdinand Stutz were also re-elected to the Compensation Committee. In addition, a large majority of the shareholders of Autoneum Holding Ltd gave formal discharge to all members of the Board of Directors and the Group Executive Board.

The consultative vote on the 2019 remuneration report was approved by 89.2%. The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2021 financial year as well as the other proposals were also approved by a large majority.

 

More information:
Autoneum
Source:

Autoneum Management AG

print close
more
Even more efficient and economical – the modified RoTac³ is part of the BCF S8’s standard scope of delivery (c) Oerlikon Neumag
Even more efficient and economical – the modified RoTac³ is part of the BCF S8’s standard scope of delivery
20.03.2020

Oerlikon Neumag: RoTac³ tangling unit with comprehensive modifications

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Stable and efficient yarn production is hugely important to yarn manufacturers. Not only does the evenness of the tangling knots make the investment interesting, so too does the energy efficiency of the RoTac3. The tangling unit requires up to 50 percent less energy for generating compressed air. Against the background of rising energy prices, this represents an excellent prerequisite for optimizing production costs.

Oerlikon Neumag has been able to secure various retrofit contracts since the launch of the RoTac3 in 2015. And new systems are predominantly equipped with RoTac³. The RoTac³ is included in the standard scope of delivery for the newer BCF S8 system. The tangling unit is available as an option both for the single-end Sytec One system and the three - end S+ and it can also be retrofitted on request.

More information:
Oerlikon Neumag Manmade Fibers segment
Source:

Oerlikon Neumag 

print close
more
Oerlikon logo (c) Oerlikon
Oerlikon logo
17.03.2020

Oerlikon wins three large manmade fibers orders in China

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

The systems business in China remains largely unchanged despite the short-term interruption caused by the coronavirus epidemic following the Chinese New Year celebrations. Long-term project planning for major customers in the manmade fibers industry has resulted in new major orders being placed with Oerlikon Barmag. One of the three new orders, valued at more than CHF300million (EUR282million), is the largest order ever received by Oerlikon Barmag, based in Remscheid, Germany.

The comprehensive manmade fibers technology solutions by Oerlikon are used along the entire value chain in polyester yarn manufacturing and contain cutting-edge automation and digitalization technologies. Oerlikon’s innovative technologies will enable the three Chinese companies to increase their production capacities for polyester yarn and to remain competitive. Oerlikon Barmag will provide the entire system for WINGS POY and WINGS FDY, as well as the texturing machines from the eFK product family in phases over a period of slightly over two years.


 

More information:
Oerlikon Manmade Fibers Manmade Fibers segment
Source:

Oerlikon

print close
more
(c) ISKO
article as PDF
12.03.2020

ISKO shared R-TWOTM, its 100% responsible platform, at Drapers Sustainable Fashion Forum

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Stemming from the mill’s holistic vision, R-TWOTM represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its environmental performance. With the goal to create fabrics that can provide both quality and responsibility, ISKO has developed this platform, which deals with the most critical issue that apparel supply chains are currently faced with: using more than what actually needed.

More information:
Isko Drapers Sustainable Fashion Forum
Source:

ISKO

print close
more
perPETual und Polygenta produzieren rPET FDY auf WINGS von Oerlikon Barmag (c) Oerlikkon
perPETual und Polygenta produzieren rPET FDY auf WINGS von Oerlikon Barmag
article as PDF
12.03.2020

perPETual and Polygenta manufacture using Oerlikon's WINGS

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

As one of the world’s first companies, Polygenta has, since 2014, been producing 100% recycled POY and DTY from post-consumer PET using the patented chemical recycling process developed by perPETual Global Technologies. perPETual’s process reduces CO2 impact by more than 66% compared to virgin PET. The yarn is spun using Oerlikon Barmag systems and equipment. As a result, Polygenta is able to produce a wide range of DTY and FDY yarns that comply with the Global Recycled Standard (GRS).

More information:
Oerlikon
Source:

Oerlikon

print close
more
Compact II (c) Owl Media
Compact II
03.03.2020

Eltex of Sweden AB reports success with its Eye Compact II yarn

A close eye on quality with the Eye Compact II

Eltex of Sweden AB, a member of TMAS, the Swedish textile machinery association, reports solid success with its Eye Compact II yarn monitoring system for carpet tufting machines, since its launch at ITMA 2019 in Barcelona last June.

The sensor units of the Eye Compact II,Brian Hicks, Eltex CEO explains, have been successfully miniaturised to approximately a third of the size of those with the established Compact system, allowing them to be mounted on the very latest high speed tufting machines that are graphics driven, with limited space at the puller rollers.

Early stage prevention
Unlike the sensor systems that are employed at later positions on tufting machines – in order to detect faults in the formed fabric – Eye Compact II technology is about prevention at an earlier stage, through the detection of missing yarns.

A close eye on quality with the Eye Compact II

Eltex of Sweden AB, a member of TMAS, the Swedish textile machinery association, reports solid success with its Eye Compact II yarn monitoring system for carpet tufting machines, since its launch at ITMA 2019 in Barcelona last June.

The sensor units of the Eye Compact II,Brian Hicks, Eltex CEO explains, have been successfully miniaturised to approximately a third of the size of those with the established Compact system, allowing them to be mounted on the very latest high speed tufting machines that are graphics driven, with limited space at the puller rollers.

Early stage prevention
Unlike the sensor systems that are employed at later positions on tufting machines – in order to detect faults in the formed fabric – Eye Compact II technology is about prevention at an earlier stage, through the detection of missing yarns.

Critically, the sensors need to be installed after the last puller roller and before the tufting needles, because otherwise the roller could still be feeding yarns that will not been successfully taken by the needles. This is only possible with the extremely slim Eye Compact II units, which can also be positioned either above or below the rollers.

Guarantee
Another benefit is that the sensors can be arranged more closely together, with each of them monitoring 16 yarn positions, and their robustness ensures that once fitted, there is little the technicians or operators need to do.

Automatic
The Eye Compact II system easily learns pattern changes and displays the number of yarns involved to the operator for confirmation, and different parameters for different yarns groups can also even be set if required. With its research and development work primarily carried out at its headquarters in Osby, Sweden, and North American sales and service operated from its subsidiary in South Carolina, the manufacturing plant of Eltex has been located at Templemore in Ireland since 1976, providing significant advantages in terms of high flexibility and logistical services to customers on both sides of the Atlantic.

 

More information:
Eltex of Sweden AB TMAS
Source:

Owl Media

print close
more
New pilot line prioritizing collaborative product development (c) Beaulieu International Group
New pilot line prioritizing collaborative product development
26.02.2020

Beaulieu Fibres International at INDEX™20

Beaulieu Fibres International prioritizes collaborative product development & sustainable long-term partnerships

  • Up & running: pilot line & new fibre line in Italy, BICO capacity for industrial fibres in Belgium
  • Introducing new Meraspring for soft cushioned hygiene nonwovens
  • Extended fibre range for filtration applications
  • Stand 1340, INDEX™20, 31st March – 3rd April, Palexpo, Geneva

Beaulieu Fibres International, the leading European polyolefin and BICO fibre supplier, will announce at INDEX™20 completion of its pilot line in Terni, Italy, the start-up of the state-of-the-art multifunctional production line in Terni, and the new BICO line in Belgium. The company invites the Nonwoven sectors to join efforts in accelerating the development of innovative and sustainable solutions for a rapidly changing global market (Stand 1340).

Beaulieu Fibres International prioritizes collaborative product development & sustainable long-term partnerships

  • Up & running: pilot line & new fibre line in Italy, BICO capacity for industrial fibres in Belgium
  • Introducing new Meraspring for soft cushioned hygiene nonwovens
  • Extended fibre range for filtration applications
  • Stand 1340, INDEX™20, 31st March – 3rd April, Palexpo, Geneva

Beaulieu Fibres International, the leading European polyolefin and BICO fibre supplier, will announce at INDEX™20 completion of its pilot line in Terni, Italy, the start-up of the state-of-the-art multifunctional production line in Terni, and the new BICO line in Belgium. The company invites the Nonwoven sectors to join efforts in accelerating the development of innovative and sustainable solutions for a rapidly changing global market (Stand 1340).

New products are also on their way to show. For nonwoven converters serving the hygiene segment, Beaulieu Fibres International will unveil Meraspring to the European market at INDEX™20. The BICO-fibres are made with polyethylene (PE) in the sheath and polyethylene terephthalate (PET) in the core, and are the latest addition to the hygiene portfolio.

More information:
INDEX Beaulieu Fibres International
Source:

EMG for Beaulieu International Group

print close
more
Hexcel at JEC World 2020
Hexcel at JEC World 2020
article as PDF
25.02.2020

Hexcel at JEC World 2020

Hexcel’s Leading Position in Aerospace and Automotive Makes Hexcel a Trusted Partner for Urban Air Mobility

At this year’s JEC World in Paris on March 3-5, Hexcel will highlight the growing need for innovations in composite materials to support the emerging Urban Air Mobility (UAM) market.

Urban air mobility – urban transportation systems that move people by air or enable cargo deliveries – is the next big transportation innovation. Similar to taxis or ride sharing today, UAM will help remove congestion from our streets and provide a convenient, rapid method for travel in urban centers as well as in remote areas.

Advanced composite materials will be at the heart of UAM vehicles by providing lightweight, efficient, reliable, and cost-competitive options for manufacturing. “Materials have been a key driver of efficiency for aircraft today, and they will be even more important for the emerging UAM marketplace,” said Imad Atallah, Director of Strategic Marketing for Aerospace and Urban Air Mobility at Hexcel.

Hexcel’s Leading Position in Aerospace and Automotive Makes Hexcel a Trusted Partner for Urban Air Mobility

At this year’s JEC World in Paris on March 3-5, Hexcel will highlight the growing need for innovations in composite materials to support the emerging Urban Air Mobility (UAM) market.

Urban air mobility – urban transportation systems that move people by air or enable cargo deliveries – is the next big transportation innovation. Similar to taxis or ride sharing today, UAM will help remove congestion from our streets and provide a convenient, rapid method for travel in urban centers as well as in remote areas.

Advanced composite materials will be at the heart of UAM vehicles by providing lightweight, efficient, reliable, and cost-competitive options for manufacturing. “Materials have been a key driver of efficiency for aircraft today, and they will be even more important for the emerging UAM marketplace,” said Imad Atallah, Director of Strategic Marketing for Aerospace and Urban Air Mobility at Hexcel.

Already, Hexcel is a leader in advanced composite materials for the aerospace market and is a key supplier of composite materials to the automotive industry. So, the company is well positioned to offer solutions to meet the critical needs of high-rate and quick-part manufacturing cycles, in addition to low-cost needs for this space. Hexcel’s materials solutions approach for UAM is to make it greener and more sustainable, safer, more comfortable, and more affordable.

Hexcel’s broad range of carbon fiber and HexPly® prepreg solutions, including snap cure thermosets and thermoplastics, coupled with the most qualified positions on aerospace programs in the industry make the company a trusted partner for UAM. In addition to offering composite materials from carbon fibers, prepregs, honeycomb and reinforcements, Hexcel’s best-performing market solution in noise absorption on aircraft jet engines, Acousti-Cap®, provides a strong position of innovation to solve one of the most critical problems in the UAM space – community noise. “We are applying our technologies to the unique needs of urban air mobility vehicles,” Atallah said.

Hexcel’s ability to bring materials technology from the aerospace and automotive industries represents a unique strength in solving the critical challenges of UAM, especially around high-rate manufacturing, low-cost materials, light weighting, and noise. “Both thermoplastics and quick-cure thermoset materials are expected to have applications on UAM vehicles,” Atallah said. Furthermore, Hexcel’s broad product portfolio including unsized carbon fiber has proven to be the most compatible with thermoplastic resins from a consolidation perspective.

More information:
Hexcel JEC World
Source:

AGENCE APOCOPE

print close
more
Stephan Sielaff and Christian Skilich appointed to the Management Board of the Lenzing Group
Stephan Sielaff and Christian Skilich appointed to the Management Board of the Lenzing Group
article as PDF
21.02.2020

Stephan Sielaff and Christian Skilich appointed to the Management Board of the Lenzing Group

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Stephan Sielaff is a chemical engineer who gained experience in the chemical industry in the years 1993 to 2014, holding various management positions for Unilever and Symrise. Since 2014, he has worked for the Swiss specialty chemicals company Archroma, an important supplier of the textile and paper industry, as a Member of the Board of Directors and Chief Operating Officer (COO).He has been responsible for forming the integrated operational structure and the strategic development of the company.

Christian Skilich, who will assume management responsibility for the new Pulp and Wood Raw Materials Division in the Lenzing Group, boasts outstanding expertise in the field of paper and pulp technology. With a Master of Science in Paper Technology and Engineering & Economics, he first held various positions in the paper, packaging and glass industries. Since 2004, he has worked in a broad range of management areas on behalf of the internationally operating Mondi Group. Christian Skilich most recently served as Chief Operating Officer on Mondi’s Board of Directors, overseeing projects in the USA and Europe.

More information:
Lenzing AG
Source:

Lenzing AG

print close
more
Oerlikon Nonwoven at the INDEX in Geneva (c) Oerlikon
Oerlikon Nonwoven at the INDEX in Geneva
article as PDF
21.02.2020

Oerlikon Nonwoven at the INDEX in Geneva

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the manufacture of hygiene nonwovens, Oerlikon Nonwoven offers its new QSR (Quality Sized Right) systems. Here, the benefits of the Chinese machine construction partner’s nonwoven formation are integrated into the complete solution. The advantage for nonwovens producers: highly competitive solutions at attractive prices with comparably low investment.

Cost-efficiently manufacturing meltblown nonwovens
New, unique and highly sophisticated filter media can be easily and efficiently manufactured thanks to Oerlikon Nonwoven’s optimized meltblown technology. Whether as a stand-alone system with one or several positions, as ‘plug & produce’ installations for already existing systems or in conjunction with other technologies: the Oerlikon Nonwoven meltblown process already enables the cost-efficient manufacture of meltblown nonwovens with the quality requirements of tomorrow. Ever more producers are choosing the meanwhile extensively tried-and-tested and consistently further-developed Oerlikon Nonwoven meltblown solutions.

Airlaid technology for the nonwovens of tomorrow
Pulp or cellulose fibers as raw material for manufacturing nonwovens are currently virtually unrivaled with regards to sustainability and environmental compatibility. The Oerlikon Nonwoven airlaid process is the ideal solution for processing this raw material into high-end products for a wide range of applications. Today, there is huge demand for manufacturing solutions for high-quality, lightweight airlaid nonwovens with economically attractive production speeds and system throughputs. In this area, the patented Oerlikon Nonwoven formation process – which also permits the homogeneous mixing of the most diverse raw materials, while simultaneously guaranteeing superb evenness and homogeneous fiber laying – is setting standards even for nonwovens with low running meter weights. And the benefits of this technology are also increasingly gaining significance in sustainable recycling applications.

P&G patented PHANTOM technology from Teknoweb Materials
Also being showcased at the trade fair stand is the P&G patented PHANTOM technology from Teknoweb Materials, Oerlikon Nonwoven’s strategic partner for hygiene products and wipes. The PHANTOM technology is released to Teknoweb Materials by P&G in worldwide exclusive license. The PHANTOM technology is the superior dry laid alternative technology for manufacturing wet wipes from pulp and polymer fibers, for example. Compared to conventional, known processes, this technology offers superior performances with cost advantage in much more eco-friendly products. Dispensing with hydroentanglement renders subsequent drying of the material redundant. Targeted process management allows the optimal setting of the relevant product parameters such as softness, tenacity, dirt absorption and liquid absorption.

Oerlikon Nonwoven at the INDEX in Geneva (c) Oerlikon
More information:
Oerlikon
Source:

Oerlikon

print close
more
Automatisierte Qualitätskontrolle in der Produktion von Gasdiffusionsschichten für Brennstoffzellen bei der SGL Carbon in Meitingen (c) SGL Carbon
Automatisierte Qualitätskontrolle in der Produktion von Gasdiffusionsschichten für Brennstoffzellen bei der SGL Carbon in Meitingen
07.02.2020

SGL Carbon awarded by Hyundai as Supplier of the Year 2019

Automatized quality control of gas diffusion layers for fuel cells at SGL Carbon in Meitingen

  • One of only two awarded overseas suppliers
  • Long-term cooperation for a substantial production ramp-up

Mid of January SGL Carbon received the “Supplier of the Year 2019” award for excellence in quality management and contributions to strengthen the overall competitiveness of Hyundai Motor Group related to the manufacturing and supply of fuel cell components. The award is being granted by the Korean automaker once a year, evaluating several hundreds of suppliers from across the world in different categories. This time only two overseas suppliers have been awarded.

SGL Carbon and the Hyundai Motor Group have been cooperating on fuel cell technology for almost 20 years. Last year, the two companies agreed on an early extension to the existing supply agreement for SIGRACET® gas diffusion layers for the NEXO fuel cell car, encompassing a new long-term cooperation including a substantial ramp-up of the current production and supply volumes.

Automatized quality control of gas diffusion layers for fuel cells at SGL Carbon in Meitingen

  • One of only two awarded overseas suppliers
  • Long-term cooperation for a substantial production ramp-up

Mid of January SGL Carbon received the “Supplier of the Year 2019” award for excellence in quality management and contributions to strengthen the overall competitiveness of Hyundai Motor Group related to the manufacturing and supply of fuel cell components. The award is being granted by the Korean automaker once a year, evaluating several hundreds of suppliers from across the world in different categories. This time only two overseas suppliers have been awarded.

SGL Carbon and the Hyundai Motor Group have been cooperating on fuel cell technology for almost 20 years. Last year, the two companies agreed on an early extension to the existing supply agreement for SIGRACET® gas diffusion layers for the NEXO fuel cell car, encompassing a new long-term cooperation including a substantial ramp-up of the current production and supply volumes.

Hyundai-Auszeichnung „Supplier of the Year 2019“ für herausragendes Qualitätsmanagement (c) SGL Carbon
More information:
SGL Carbon Hyundai
Source:

SGL Carbon

print close
more
HANRO 201 Balanceshirt (c) Jersey manufacturer TINTEX
HANRO 201 Balanceshirt
06.02.2020

TINTEX @ PREMIÈRE VISION PRESENTS NATURALLY ADVANCED EVOLUTION

THE S/S 2021 SMART COLLECTION AND STRATEGY: “TEAMING UP IS THE RESPONSIBLE WAY FORWARD”
At Première Vision in Paris, February 11th – 13th Jersey manufacturer TINTEX presents its S/S 2021 collection and a new strategic approach to make the world a better place, a garment at a time in  Hall 5 Booth R50/S43, and Hall 3 Smart Creation Booth S7. “That’s why we decided to update our statement-motto in Naturally Advanced Evolution: a promise and an invitation to work together to develop further collections combining an environment-driven approach with cutting-edge technology.” Says Ricardo Silva, Head of Operations of TINTEX.

THE S/S 2021 SMART COLLECTION AND STRATEGY: “TEAMING UP IS THE RESPONSIBLE WAY FORWARD”
At Première Vision in Paris, February 11th – 13th Jersey manufacturer TINTEX presents its S/S 2021 collection and a new strategic approach to make the world a better place, a garment at a time in  Hall 5 Booth R50/S43, and Hall 3 Smart Creation Booth S7. “That’s why we decided to update our statement-motto in Naturally Advanced Evolution: a promise and an invitation to work together to develop further collections combining an environment-driven approach with cutting-edge technology.” Says Ricardo Silva, Head of Operations of TINTEX.

“Textile producers and fashion brands should develop their partnership in a much more collaborative way.” Say Says Ricardo Silva, Head of Operations of TINTEX. In a move towards his partners, the company has re-organised its products collection into 4 distinct categories and further evolved its production process in order to guarantee the highest quality and performance of its fabrics and, at the same time, to become more competitive and to allow its clients to orientate better and easily find the most suitable and practical solution. COLLECTION focuses on seasonal proposals while EXPRESSIONS includes a range for all-year-round collections.

THE SS 2021 COLLECTION is imbued with sustainability, innovation and a collaborative attitude. The new range comprises 24 new references built focusing on responsible materials – including recycled or recyclable (100% same raw material), tactile finishes and active performances with smart and cutting-edge technical background. “The main area we developed for the S/S 2021 collection was carefully selected starting from the inputs we had from our partners during some of the most successful collaborations in the past 2 years,” adds Ana Eusebio, designer.

And just to keep the conversation about sharing innovation at best, TINTEX is officially shading the light on its Coating Unit that, thanks to continuous investments, will be able to deliver Naturally Advance Solutions in terms of finishings, not just for TINTEX but also for woven producers that are aligned with the corporate commitment. Come to discover TINTEX portfolio of smartly developed coatings at its booth at Smart Creation, hall 3.

 

Outlier Fit Shoot Fall 2019 (c) Jersey manufacturer TINTEX
More information:
TINTEX Première Vision Paris
Source:

GB Network

print close
more
(c) Trevira GmbH
30.01.2020

Trevira at Heimtextil 2020

The Trevira CS joint booth at Heimtextil 2020 was once again a success.

Trevira looks back on a successful trade fair appearance at Heimtexil 2020. The concept of a joint booth together with customers along with the presentation of product innovations and a special exhibition dedicated to the contract sector has once again proved its worth. Trevira hosted 31 co-exhibitors thus increasing the number of participants again compared to last year. Members of the entire textile value chain were present at the Trevira stand: from the fibre production and yarn manufacture, to the colouring, weaving and warp and weft knitting stages, to the textile editor.

Klaus Holz, CEO Trevira GmbH: „We are pleased about the very positive feedback we got on our joint booth at Heimtextil 2020 from our customers and the visitors to our stand. It shows that our concept is successful and that the booth works well as a market place for Trevira CS.”

The Trevira CS joint booth at Heimtextil 2020 was once again a success.

Trevira looks back on a successful trade fair appearance at Heimtexil 2020. The concept of a joint booth together with customers along with the presentation of product innovations and a special exhibition dedicated to the contract sector has once again proved its worth. Trevira hosted 31 co-exhibitors thus increasing the number of participants again compared to last year. Members of the entire textile value chain were present at the Trevira stand: from the fibre production and yarn manufacture, to the colouring, weaving and warp and weft knitting stages, to the textile editor.

Klaus Holz, CEO Trevira GmbH: „We are pleased about the very positive feedback we got on our joint booth at Heimtextil 2020 from our customers and the visitors to our stand. It shows that our concept is successful and that the booth works well as a market place for Trevira CS.”

Product novelties were presented in an Innovation Park. Under the headline “Recycling at Trevira” the fibre producer presented its sustainable product range and diversified approaches to recycling: flame retardant fibres are produced from residual materials, which are reprocessed in an agglomeration plant. The recyclates are then deployed in the spinning facility to make new, high-quality products consisting of 100 % pre-consumer recycled material. Recycled, flame retardant filaments are produced from PET bottles and have a recycled content of 50 %. Standard polyester spun-dyed filament yarns are also available in a recycled version. Produced from PET bottles these yarns have a recycled content of 100 %.

In order to produce flame retardant fabrics which are also high-performing  in outdoor applications, Trevira now offers six more colours in addition to the existing colour range of 24 UV-stable, spun-dyed filament yarns. Trevira had been awarded the „Brandenburger Innovationspreis Kunststoffe und Chemie 2019“ for this innovation.

Cationic dyeable fibres and filament yarns enhance the Trevira portfolio of flame retardant specialties. They are used to create melange designs in fabrics, which still represents a strong trend in the home textile sector.

To meet the ever more complex demands of the market for more flexibility in design and additional functions as well as for sustainable products Trevira has introduced an enhanced Trevira CS branding concept, consisting of the three brands Trevira CS, Trevira CS flex und Trevira CS eco. Assigned according to product features, all of them stand for tested safety.

(c) Trevira GmbH (c) Trevira GmbH (c) Trevira GmbH (c) Trevira GmbH (c) Trevira GmbH (c) Trevira GmbH (c) Trevira GmbH
More information:
Trevira Heimtexti 2020
Source:

Trevira GmbH

print close
more
The BCF S8 sets new standards with regards to color separation. (c) Oerlikon Manmade Fibers
The BCF S8 sets new standards with regards to color separation.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Focuses on Carpet yarns

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

 

More information:
Oerlikon Manmade Fibers Egy Stitch & Tex
Source:

Oerlikon Manmade Fibers

print close
more