From the Sector

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Jeanologia, a world leader in sustainable and efficient technology development, joined forces to launch an eco-advanced alternative to the denim fabric washing process, including in some cases the mercerization, one of the most water-intensive and pollutant processes of denim fabric finishing.

It all starts with the spinning step where the cotton is turned into yarn. The second step is a pretreatment that will prepare the yarn for the dyeing step. The dyed yarn then goes through the sizing process, which is a treatment preparing it for weaving. At this stage, we have obtained a denim fabric that will go through a few more steps. First, the fabric may undergo a washing treatment or, in some cases, mercerizing treatment which consists of treating it with caustic soda in order to obtain a more lustrous, flat and less reddish blue and black denim.

In both traditional ways to clean the fabric, washing or mercerizing, multiple highly water intensive washings are required in order to restore optimal fabric pH and remove unfixed dyestuff and any undesired deposits or impurities from the fabric. One of such impurities released in the washing process is aniline, a substance that is classified as a category 2 carcinogen and considered toxic to aquatic life.

That is why Archroma and Jeanologia decided to team up and develop an alternative to the traditional fabric cleaning process and its subsequent water-intensive and water-polluting washings.

• The breakthrough alternative to the fabric cleaning concept presented by Jeanologia and Archroma combines the use of the aniline-free* PURE INDIGO ICON dyeing system of Archroma, and the water-free** and chemical-free “G2 Dynamic“ finishing technology of Jeanologia.
• The Archroma/Jeanologia solution allows to create aniline-free* denim, and improve the final aspect of the fabric through a fully chemical-free and almost water-free** cleaning alternative treatment.
• The Archroma/Jeanologia solution can also be used with additional Archroma coloration systems such as INDIGO REFLECTION or PURE UNDERTONES.

Umberto Devita, Business Development Manager at Archroma’s Competence Center for Denim & Casual Wear, who was the project leader for this new development, comments: “At Archroma, we strive to develop solutions in line with our principles of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it’s our nature”. It was therefore very inspiring to work with a partner who shares the same values of developing efficient new processes to bring all know-how to our customers to maximize value – for denim that looks as good as the good it creates.”

For Jean-Pierre Inchauspe, Business Director of G2 Dynamic at Jeanologia, “this association is another step to change traditional, more polluting and water consuming processes in the textile industry for new ones using technology, improving, and boosting subsequent production stages up to the finishing of the garment, making them more efficient and allowing companies to be more competitive, increase productivity and offer a product that is completely sustainable with high quality.”

US Vice President Kamala Harris announced significant multimillion-dollar investments by Parkdale Mills and six other companies today, as part of the Administration’s Call to Action to the private sector to promote economic opportunity in the region, as her office works to address the root causes of migration.

Vice President Harris, who is overseeing diplomatic efforts with El Salvador, Guatemala, Honduras, and Mexico, announced several private sector commitments to strengthen economic opportunities in the Northern Triangle and made remarks at a White House roundtable, which included Anderson Warlick, Chairman and CEO of Parkdale Mills. The textile and apparel co-production chain is one of the most essential supply chains for employment and economic development in both the United States and the Northern Triangle region, currently supporting over 1 million jobs in the United States and the Central American region. The Dominican Republic-Central America Free Trade Agreement (CAFTA-DR) and its strong rules of origin are the primary reasons this co-production chain exists, which is seeing significant growth this year.

North Carolina-headquartered Parkdale Mills, one of the largest manufacturers of spun yarn and cotton consumer products in the world, will make a multimillion-dollar investment in a new yarn spinning facility in Honduras and make an additional substantial investment to support existing operations in Hillsville, Virginia. This investment will help customers shift 1 million pounds of yarn per week away from supply chains in Asia and China and enhance U.S. and CAFTA-DR co-production resilience and increase regional product offerings. Parkdale’s announced investment will create hundreds of jobs in Honduras and further support hundreds of employees in Parkdale’s Hillsville operations.  

Recently, administration officials from the U.S. Trade Representative’s office and the Vice President’s office met with the U.S. textile industry to reaffirm the importance of rules of origin in nearshoring production chains, helping address labor and environmental challenges and mitigating supply chain risk.

“I would like to sincerely thank Vice President Harris for making this announcement and leading the effort with private industry to create more economic opportunities in northern Central America and the United States,” said Anderson Warlick, Chairman and CEO of Parkdale Mills. “Parkdale’s investments will support good paying jobs in the United States and in the Central American region and significantly increase our extensive product offering and capacity, including the production of sustainable specialty yarns.

Parkdale sees an enormous opportunity for brands and retailers to re-shore and nearshore production supply chains and double the size of U.S.-CAFTA-DR trade, because of the rules of origin in our trade agreement and a shift in sourcing by brands and retailers mitigating their supply chain sourcing risks.  We are excited about what this opportunity means for jobs in the U.S. and the region for this critical production chain and couldn’t be more thrilled to be part of this effort.  We look forward to working with the Vice President and her team on strengthening the textile and apparel production chains in the U.S. and region.”

National Council of Textile Organizations (NCTO) President and CEO Kim Glas, said, “This is an exciting and important announcement by Parkdale and Vice President Harris. Our industry has invested billions of dollars in the U.S. and in the region as a result of the investment-based rules of origin in the CAFTA-DR agreement, which ensures the job benefits of the agreement are reserved for the parties to the agreement.  Additional substantial announcements on further investment in textile and apparel production are expected soon.

As brands and retailers are seeking more environmentally sustainable, vertically integrated, transparent, and quick turnaround supply chains, our collective industries stand ready to work with companies that are seeking to mitigate sourcing strategies as Asian supply chains have faced enormous production constraints.  Further verticalization in the industry, like Parkdale’s announcement today, allows broader product diversification and grows jobs across the textile and apparel production chain.

We are thrilled with today’s announcement because it is a win-win for American and Central American workers and our environment and a huge opportunity to further recalibrate supply chains out of China and Asia. This valuable co-production chain between the U.S. and the CAFTA-DR region accounts for $12 billion in two-way trade and billions of dollars of investment. Significant growth is occurring in our sector and is expected to continue as supply chains continue to recalibrate.  We are delighted about this today’s announcement and appreciate the Administration’s strong support.”

Global energy consumption reached a record high in 2019, following a 40-year trend for rapidly increasing energy demand that was only halted by the Coronavirus pandemic. It’s estimated that more than 80 % of this energy is still generated from fossil fuels that produce CO2 emissions and contribute to climate change. Renewable energy offers a solution to this problem, but saving energy whenever possible is an even more effective approach. That are the motives for Trützschler to develop the intelligent card TC 19i, which sets a new benchmark for energy-efficient carding.

The intelligent Trützschler card TC 19i features the unique T-GO gap optimizer, which continuously and automatically monitors and adjusts the carding gap to an ideal position during production. Innovative drive- and air technology further reduce energy consumption of the TC 19i.

The most energy-intensive elements in a carding machine are the drive, the dust suction process and the compressed air system. Permanent suction is needed to remove dust and cotton waste in key places. Smart optimization of these areas has made the intelligent card TC 19i a benchmark for energy efficiency in carding because it uses less electricity, lower suction pressure and less compressed air than other machines, while providing the highest production rates currently available on the market.

In a head-to-head comparison between the TC 19i and a high-performance card from a competitor, the TC 19i consumed at least 10 % less energy per kilogram of material produced when manufacturing rotor yarn from a cotton and cotton waste mix. The compared energy values included electric power consumption and energy required for suction and compressed air and were measured in both cards at the same production of 180 kg/h. A 10 % reduction in energy per kilogram of sliver produced, as proven here by TC 19i, can have a significant impact on a spinning mill’s profitability; annual savings worth a five-digit sum are frequently possible, depending on factors such as the output of the mill. The customer trial also showed TC 19i’s excellent reliability at the customer’s usual production rate of 180 kg/h, and even demonstrated stable performance at 300 kg/h in the same application. Because the TC 19i with T-GO gap optimizer realizes maximum production rates at no compromise in quality, manufacturers can reduce their energy demand and investment costs drastically: Less machines are needed to achieve the desired output, and energy consumption per production is reduced.

This improvement was made possible by a long and sometimes challenging innovation process involving mathematical models of air flows, as well as flow simulations and prototypes. By combining the final flowoptimized parts in the TC 19i, Trützschler’s experts have developed a card that operates with suction pressure of just -740 Pa and with an air requirement of only 4200 m³/h. This translates into 40 % less energy demand for air technology compared to the latest high-performance competitor model.

• FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
• Completes HPR Award status for B.I.G. YARNS’ European production facilities
• Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

Emmanuel Colchen, General Manager B.I.G. YARNS, comments: “Achieving the prestigious HPR Award recognizes the commitment of the teams at B.I.G. YARNS and the wider Beaulieu International Group to proactive risk management and contingency planning to ensure the safety and protection of our workplaces. Safeguarding property is a key element in enabling us to provide business continuity for our customers in demanding sectors like automotive, commercial contract and residential flooring.”

B.I.G. YARNS’ Komen production facility is the fifth plant at B.I.G. to receive HPR status - the highest level a plant can achieve for fire risk prevention and protection.

The Yarns division of Beaulieu International Group achieved HPR status for its other European site in Comines, France, in 2017.

• Long-term partnership between the Austrian textile producer FEINJERSEY and the German textile machinery manufacturer BRÜCKNER

The Feinjersey Group is an internationally operating textile company and supplies the "global players" of the textile industry worldwide. The value chain of the company, which is based in Götzis, Austria, ranges from yarn processing to the finished product.

As a fully integrated production company, the internationally active textile company Feinjersey attaches great importance to a high quality standard and guarantees care at every step in the process chain. With approx. 250 employees and annual sales of around 45 million euros, the company knits, dyes and finishes top-quality knitted fabrics as well as elastic woven fabrics for a wide range of applications.

Products are made for the fashion, sports, workwear and technical textiles sectors. Among other things, fabrics for the automotive industry, laminating backings and coating substrate for artificial leather or foils, construction textiles or fabrics for medical technology are all produced.

The Austrian textile manufacturer has been certified with the Bluesign textile seal and ensures efficient use of resources with modern machinery. Water and energy consumption as well as pollutant emissions are to be reduced to a minimum.

In textile finishing in particular, the focus is on minimising energy consumption as this process is the most energy-intensive in the entire process chain. Feinjersey uses its own photovoltaic system for this purpose, as well as the heat recovery and exhaust air purification systems on the stenter frames. By using the waste heat from production, the company's buildings are heated. All six stenter frames at Feinjersey are made by BRÜCKNER and produce with three-stage heat recovery and exhaust air purification systems.

The latest BRÜCKNER line has a working width of 4.20 m and is mainly used for the finishing of high-ly elastic and extremely sensitive knitted fabric. In order to avoid yellowing on the fabric, the stenter is equipped with an indirect gas heating system. The knitting oil vapours coming from the fabric during the heat-setting process are extracted from the dryer and cleaned in a BRÜCK-NER ECO-AIR exhaust air cleaning system before being extracted to atmosphere. The complete exhaust air treat-ment on the newest stenter is carried out by a multistage BRÜCKNER ECO-HEAT and ECO-AIR system.

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

• Xinfengming Group invests in innovative staple fiber technology from Oerlikon Neumag

Neumuenster/Shanghai – In the context of the ITMA ASIA + CITME currently taking place in Shanghai, Oerlikon has now announced that it has concluded the largest staple fiber plant order in the history of Oerlikon Neumag with the major Chinese group Xinfengming in the run-up to the trade fair. This involves eight complete staple fiber lines with a total of 320 spinning positions for the production of synthetic staple fibers. Oerlikon will not only supply the technology, but will also take over the engineering of the lines. Delivery is scheduled for 2022.

With a total capacity of 1,800 t/d, the project is Oerlikon Neumag's largest staple fiber plant order to date. The eight two-step lines will produce cotton-type staple fibers in a titer range of 1.0 - 1.4 denier. With this investment, the Xinfengming Group is expanding its product portfolio. As one of the world's leading FDY and POY polyester filament yarn producers, the Chinese company has relied on Oerlikon Barmag technologies for decades and now also on those of Oerlikon Neumag.