From the Sector

• Gorilla Protect is a new company formed in May this year to promote the Catus face mask – a major leap forward in the effectiveness of personal protection products that are available to consumers in the fight against Covid-19.
• Behind Catus and the new company is Nova Textil, the established fabric finishing company based in Grefrath, Germany, and now run by father and son team Rainer and Oliver Hurtz.

Single stenter

Rainer Hurtz founded Nova Textil with a single Monforts Montex stenter and just five employees in 1999 and has steered its constant development and growth over the past twenty years.

“Our initial focus was on the coating of mainly glass fibre fabrics, awnings and sun protection products for outdoor furnishings,” he said. “We had a great customer who was providing us with so many orders that by 2005 we took the decision to order a second Montex stenter, in a special configuration. This also allowed us to enter the market for blackout and digital printing fabrics. We’ve had a great ongoing relationship with Monforts from the beginning.”

A third Montex stenter line was installed at the company’s Grefrath plant in 2015, by which time the company had grown to 40 people and a major new market had opened up in the supply of fabrics for promotional materials at exhibitions and trade shows.

“We had a fantastic two years in 2018 and 2019 and everything was going great for the first three months of this year, but in April it all came crashing down,” said Oliver Hurtz. “Coronavirus put an end to trade shows in 2020, which had a very serious impact on our business.”

At the same time, however, the company was exploring the potential of a new biocidal product from one of its chemicals suppliers which has both antiviral and antimicrobial properties.

Filtration

“We had already been producing coated fabrics for hot gas filtration and realised that in combination with this new microporous coating we had the basis for a very effective single-layer face mask,” Rainer said. “Achieving this with a single layer product rather than the usual three has resulted in a significant advance in comfort for the wearer and because the mask is able to disinfect itself and helps regulate humidity, it can be worn a number of times without needing to be washed, for greater convenience. It only needs to be washed when it gets dirty and can also be washed up to twenty times without losing its properties, which has to be preferable to single-use disposables.”

Catus face masks are based on 100% woven cotton and the active ingredients in the finish are a reaction mass of titanium dioxide and silver chloride certified to ISO 20743 for their antibacterial effect, and to ISO 18184 for their antiviral effect.

They are proven to  eliminate over  99.99% of the human coronavirus 229 E, with the multiplication of microorganisms such as germs and bacteria prevented by the biostatic action of silver salts and viruses destroyed by oxygen-releasing substances and a mechanism that attacks their fatty envelope. The virus membrane loses its cholesterol content and the virus is inactivated.

Colours

Gorilla Protect next plans to make the masks available in four colours – black, Bordeaux, olive and grey – and is also working on colour branding and printing labels.

“It’s not possible to print on the surface of the mask after it has been coated, but its is possible for volume orders to be printed before the treatment,” Oliver Hurtz said.

“Face masks are going to become an established part of life in the West like they are in Asia and need to be as comfortable and convenient as possible for the wearer,” his father concluded. “With these things in mind, we believe Catus is a significant step forward.”

The 26th edition of Intertextile Shanghai Home Textiles concluded on 26 August, following a successful three-day run at the National Exhibition and Convention Center (Shanghai). It was Messe Frankfurt’s first event to take place in Shanghai in 2020 following disruptions from the pandemic. Amid the challenges presented by the pandemic, this year’s fair provided a vital opportunity for the international home and contract textile industries to source and reconnect through virtual and in-person meetings. Offering a comprehensive range of home and commercial textile products, the fair welcomed over 600 exhibitors and attracted more than 25,000 trade buyers.

Speaking as the fair concluded, Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “Intertextile has always been dedicated to providing an ideal platform for the international home textile industry and we are delighted to continue to do so during these unprecedented, challenging times. In view of the current global travel restrictions, this year’s fair offered a series of digital tools in addition to the traditional exhibition, allowing the fair to reach as wide an audience as possible. We are glad that this new format was highly recognised by the participating exhibitors and buyers alike.”

“Whilst economic activity in China is progressively recovering and domestic consumption continues to grow, the country’s exports are taking longer to rebound,” Ms Wen added. “One of the main objectives of this year’s fair was to connect domestic and international suppliers and buyers who are eager to make personal contacts and get back to business. As evidenced by feedback from numerous exhibitors and visitors, the fair has been able to help and support the industry’s recovery, so we are delighted with the results.”

Online business matching platform connected worldwide companies
 
In view of the current international travel restrictions, this year’s fair launched a brand new online business matching platform, which connected around 200 buyers from over 50 countries and regions to 60 exhibitors. The platform introduced multiple new functions, such as live-stream product presentations and a real-time chat platform to better facilitate business exchanges between suppliers and buyers from around the world. One exhibitor participating in the platform was Suzhou Roufang Textile Technology Co Ltd. “Yesterday we had a live-stream product presentation, which attracted around 200 buyers. The online platform is useful for us as we could showcase our new products and design concepts to overseas buyers, and let them know that we are still here to serve them,” the company’s Business Manager Ms Yu Qian Ru explained.

Mr Azam Osman, Manager of the Factory Depot (Pty) Ltd from South Africa expressed his satisfaction about the online platform: “I am glad that the fair provided the online business matching service where I have seen a lot of quality furniture and decorative fabric exhibitors. I’m interested in connecting with them.” Another buyer, Ms Elena Freyuk from Ziptown Trading Inc. said: "I am pleased that the fair offered both live-stream and video recording product presentations as I was unable to watch the live presentation due to time difference. The services were very thoughtful!”

A source of inspiration for the industry
 
To ensure fairgoers can discover the latest design and industry trends and insights, this year’s fringe programme presented a series of high quality events, covering the industry’s hottest topics. Some of the highlights included the 2021 Intertextile Trend Forum, which was led by Shen Lei, the Chinese representative of the Intertextile International Lifestyle Trend Committee. The forum brought together five prominent Chinese designers including Ben Chen, Ben Wu, Meng Ye, Paul Pang and Xie Ke, who presented an in-depth interpretation of the theme of 2021 Intertextile Trends, “BOUND”. Other events included Ride the Storm – Home Textile Digital Printing Forum, Tmall Seminar on industry digitalisation, Furniture & Home Textile Direct Negotiation Event and more.

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

• Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
• With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

• Live Event Series Launched to Connect with Customers and Drive New Opportunities After COVID-19

Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, has announced it will host a three-part virtual event series – Mimaki Live Series – to support customers looking for inspiration and advice on how to maintain or revive business after the COVID-19 crisis.

Building on the success of Mimaki’s Virtual Print Festival in March and April this year, Mimaki has created an exciting and insightful three-day programme for three market-focused virtual events:

• Event I – Sign Graphics – 30th June 2020
• Event II – Textiles – 14th July 2020
• Event III – Industrial Printing - 27th August 2020

Each event will provide a platform for Mimaki representatives, customers, and suppliers to discuss the impact the COVID-19 crisis has had on their business and the wider industry, as well as share their experiences, challenges, and success stories.

The Mimaki Live events will feature a host of engaging panel discussions, opinion polls, live chats and Q&As, all designed to prompt important, topical discussions and share information and advice across the print community.  

To register for the Mimaki Live event series, please visit www.mimakieurope.com/mimaki-live-event.

Modernized press eases digital printing conversion, signals new era for PCMC and RDP Marathon

Paper Converting Machine Company (PCMC)—part of the Barry-Wehmiller Converting Solutions Platform announced the recent installation of the new Signature Series (380V-s) wide-web, high-speed offset  press at J.J. Collins Printers in Charleston, Illinois.
The 380V-s is the first in the series that is replacing the 380V press series, long highly regarded by printers in the longrun documents and high-end promotional graphics markets. The new design incorporates the latest in internet connectivity and touchscreen technology, and allows for easy integration with full or hybrid digital printing.
Designed by RDP Marathon, a recent acquisition of PCMC, the 380V-s represents PCMC’s expansion into providing equipment and services to the offset printing industry. Backed by PCMC’s global sales, manufacturing and service support, RDP Marathon will continue to maintain a sharp  focus on innovation. J.J. Collins Printers—already using an RDP Marathon model 260P blanket-to-blanket, heat-set press for its high-end commercial products—has been providing innovative print solutions  since 1878. Its commitment to using state-of-theart pre-press, press and bindery equipment has ensured the company's position as a leader in the print manufacturing industry.
In addition to the 380V-s, PCMC continues to develop new technologies and applications for a variety of print markets.

Strategic Cooperation in Advanced Materials and Composite Machine Technologies between REACH Group/China and AMAC/Germany

A close cooperation, especially in difficult times like the Covid-19 crisis, is more and more important for sustainable success. Today, Reach Group/China and AMAC/Germany signed a cooperation agreement to
strengthen their business between China and Europe in the field of advanced materials and composite machine technologies.

Reach Group, based in Shanghai is a comprehensive group company present in the composite industry since 1996. AMAC is an expert advisor and business enabler in composite solutions based in Aachen, Germany.
Now the companies want to cooperate in the field of materials on Thermoplastic composites, bio-based materials, materials for additive manufacturing, additives for high performance and in the field of composite machine technologies on tape placement solutions, continuous lamination machines, 3D-printing as well as on advanced automated thermoset processing.

The cooperation will be presented at the next China Composite Expo on September 2-4, 2020 in Shanghai.

Join this webinar session with Kornit CEO Ronen Samuel and CMO Omer Kulka that will take place on Monday, 23rd March 2020 at 2:00 PM CET. To learn more about what the Softener is, how it works, and why it presents a great many opportunities for making the fashion industry more eco-friendly, more reactive to emerging demands, and more conducive to efficient and versatile business models.

We'll be presenting you with:

• our new NeoPigment™ Robusto Softener solution for Presto, the company’s system for digital, pigment-based roll-to-roll direct-to-fabric decoration. Kornit’s pigment-based print process can help companies achieve their sustainability goals. Traditional rotary reactive ink six-color printers use 60-80 liters of water per linear meter, and digital reactive ink for fashion designs use 14-40 liters; Kornit’s award-winning* NeoPigment™ Robusto ink set, which is both GOTS and ECO PASSPORT by OEKO-TEX® certified, is waterless.
• the Presto - Kornit’s Presto solution eliminates the need for pre- and post-treatment of fabric and allows for high-quality printing on an extraordinarily broad variety of fabric types and applications.

Please register for our webinar Here 

Captivating colours, optimum cost efficiency and a sustainable value chain: these are some of the typical features of Sappi’s Inkjet and Dye Sublimation Papers. The global manufacturer will showcase its diverse, high-quality product ranges at FESPA Madrid, in hall 3, stand D30.

• Transjet Drive dye sublimation paper tailored to industrial printing machines with a glue-belt system
• Scrolljet, a large inkjet paper, with impressively razor-sharp lines
• Digitally printed corrugated board with Fusion Topliner for consumer goods packing and displays

Eye-catching posters, textiles with excellent prints and labels that stand out clearly, this is how brand owners, advertising companies and retailers draw attention to themselves and their products. The comprehensive range of Sappi’s Dye Sublimation Papers, Inkjet Papers and Silicone Base Papers form the perfect basis for impressive brand communication. Customers and potential customers can come and convince themselves at this year’s FESPA event in Madrid, which takes place from 24 to 27 March.

Paper with impressive sustainable qualities
At its large exhibition stand in the Digital Printing hall, Sappi will showcase its Transjet range, which represents highest quality and optimal cost efficiency, offering also environmental advantages, such as low ink consumption and low transfer times. Minimal shrinkage of high elastic textiles is one of the key features of the Sportsline tacky grades. The special Transjet Drive, its extremely smooth backside and fast ink drying on the printable side, allow more efficient production on high-speed printers with glue belt systems. Sappi stands for much more than just the highest paper quality. Professional support through a special team of technical application engineers, Digital Solutions assist customers from their initial product idea to final production ensuring impressive results.

Differentiation through precision and sharpness
With its range of Inkjet papers, Sappi will demonstrate its considerable expertise in large format digital printing in Madrid. At the heart of the exhibition presentation is Scrolljet, a multi-layered coated paper for a wide range of outdoor applications, such as city light and mega light scrolling systems. DT-Plot and Swiss Matt are the best choice for graphic drawings and poster printing due to their exceptional colour results and the high precision and sharpness of the print.

Everything from a single, innovative source
When it comes to making classic packaging, shelf-ready packaging and POS displays stand out from the rest, marketing managers, brand owners and designers can always count on Fusion Topliner with its high degree of whiteness. As the topliner reproduces colours brilliantly and can be processed excellently, products made with this clearly stand out and attract attention. The product range presented by the paper and paperboard specialist is topped off by Silicone Base Papers for self-adhesive applications such as car wrapping, outdoor advertising and office supplies. This makes Sappi a versatile, long-term partner on which customers can rely. Sappi’s paper and paperboard thus go far beyond FESPA 2020: “Where colour comes alive.”

     Experienced people-centric leader to strengthen product and service capabilities

The leadership team of Baldwin Technology Company Inc. has appointed Joe Kline as its new President and CEO, effective January 17, 2020. Baldwin is a leading global manufacturer of innovative process-automation technology for the printing, packaging and converting industries. Acting CEO Kyle Chapman will continue as Baldwin’s Chairman, and devote greater focus to BW Forsyth Partners’ rapidly expanding portfolio. In 2012, Forsyth acquired thenpublic Baldwin and took it private.

Prior to joining Baldwin, Kline served as the president of a division in Eaton’s electrical sector. In addition, his previous experience includes commercial leadership roles at Eaton, Duke Manufacturing and Emerson. He holds a bachelor’s degree in electrical engineering from Ohio University and a Master of Business Administration in international business from Saint Louis University.

Kline’s appointment follows the 2019 appointments of four Baldwin business segment presidents: Rich Bennett at AMS Spectral UV, Tomas Anderbjer at Baldwin Precision Applications, Vince Balistrieri at Baldwin Vision Systems, and Matt Shishikura at Baldwin Japan.