From the Sector

Finishing machinery specialist Monforts will exhibit at the upcoming Febratex textile machinery exhibition taking place in Blumenau, Brazil, from August 20-23, along with Uniferro, its new regional partner.

This new alliance follows the retirement of Herbert Erdmann of the service agency Euro Texteis, who has worked with Monforts over more than 30 years to secure a leading position in the region for Montex stenter dryers, Thermex dyeing ranges and associated finishing technology.

With offices in Sao Paulo and Ceara and sub-agents across Brazil, Uniferro has been active in the textile industry for over 50 years.

coaTTex
At Febratex, Monforts will introduce its latest coaTTex coating unit exclusively dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coater is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and black-out coating.

Denim hub
Brazil remains a buoyant hub for textile manufacturing with a particular stength in the denim dyeing and finishing sector and many Monforts Thermex hotflue dyeing systems are already operational in the region, reaping the benefits of the Econtrol® process.

Econtrol® is a continuous process for the dyeing of woven cotton and cellulosic fabrics, especially denim, in which reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes.

“Differentiation is the key in the highly-competitive denim fabrics industry, whether through the successful incorporation of new fibres, accommodating new fabric constructions or exploring the many options for how to treat them at the finishing stage, to gain a market advantage,” says says Monforts Regional Sales Manager Achim Gesser. “Our lines allow users to be extremely versatile and respond quickly to market demand, while also allowing very short production runs.”

Because finishing is a particularly energy-intensive part of the textile production chain, it is exactly where convincing results can be achieved, he adds, and Monforts has developed a wide range of energy-saving. These included a range of heat recovery systems, such as the Universal Energy Tower and the ECO Booster. Both can also be retrofitted to existing ranges to make production more resource-efficient and economical, yet without having to invest in a new machine.

“Energy costs tend to be high in Brazil and can account for up to 70% of production costs for our customers, so there is great demand for ways of saving money,” says Gesser. “Cutting energy usage also helps in terms of global warming and reducing carbon footprint, of course, so these latest technologies are a win-win for fabric finishers. As we look forward to a promising partnership with Uniferro in Brazil, we would like to extend our thanks and best wishes for the future to Herbert Erdmann for his hard work over the years.”

Carrington Textiles announces the release of their first sustainability report, highlighting some of Carrington Textiles’ significant achievements in environmentally responsible activities.

The report, presented by RTS Textiles group, Carrington Textiles’ parent company, outlines various aspects, including their organisation’s structure, sustainability approach, social performance and future targets.

Key highlights include an investment of over €16.7 million across sites to enhance environmental performance through the purchase of equipment, such as a Combined Heat and Power (CHP) unit, biomass boilers and solar panels.

Additionally, the report sheds light on threir carbon roadmap, covering emissions under scopes 1, 2, and 3.

John Vareldzis, RTS Textiles CEO, commented: “This year, we are publishing our first sustainability report to reflect the increasing importance of sustainability in everything that we do. We understand that this is a long-term journey, and publishing this report, with clear targets and performance metrics, is just one step along that journey. It will help us create transparency and accountability throughout our operations, which, in turn, will push us further along that path.”

CARBIOS and Zhink Group, specializing in two global industries, PET and textiles, announce the signing of a joint Letter of Intent to build a biorecycling plant in China using CARBIOS’ revolutionary enzymatic depolymerization technology to serve the global market. This agreement officializes collaboration towards a long-term partnership in view of a first licensing contract to build a plant with a minimum annual processing capacity of 50k tons of prepared PET waste and would contribute to accelerating a circular economy for plastic and textiles. China is a key market for CARBIOS, and this agreement would establish a presence in this dominant market.

With 67 million tons of PET produced annually, representing 61% of global production^[1], China is the world's largest PET producer. With regional and global demand for recycled PET growing, China also has the potential to take the lead in recycled PET (r-PET) production. In 2021, 58% of the world’s r-PET was consumed in Asia (with 38% in China^[2]) underscoring this region’s importance both as a major producer and consumer.

Furthermore, China is a key transformer of PET into resins and fibers used in numerous applications in the packaging and textile industries.  Most notably, China is the primary country for transforming PET into fiber, representing 78% of all PET fiber transformation in the world^[3].

For Zhink, the strategic focus is on the development of two global industries, PET and textiles, and to be a leader with sustainable competitiveness. Zhink is a major actor within the PET market with an annual production of 3 million tons of PET, serving domestic and global markets. CARBIOS has developed a enzymatic depolymerization technology that enables efficient and solvent-free recycling of PET plastic and textile waste into virgin-like products. The initial agreement between the two groups would allow Zhink to increase its recycled PET capacities and meet its sustainable competitiveness objectives by offering r-PET from enzymatic recycling: a circular recycling solution that can process all types of PET waste including hard-to-recycle waste (such as opaque and colored bottles, multilayer food trays and textile waste) while reducing CO2 emissions by 57%^[4] compared with virgin PET production. For CARBIOS, this agreement marks a significant step in the deployment of its technology worldwide and roll-out of its licensing model to achieve its ambition to become a leading technology provider in the recycling of PET by 2035. This Asia-based plant under license by Zhink would come in addition to the world’s first industrial-scale enzymatic PET recycling plant which is currently under construction in Longlaville, France.

^[1] HIS Markit 2021, Market Research Future 2021
^[2] HIS Markit 2021, Market Research Future 2021
^[3] HIS Markit 2021, Market Research Future 2021
^[4] Database ecoinvent 3.8; French scenario, taking into account the detour of 50% of PET waste from conventional end-of-life. Virgin PET: 2.53 kg CO2/kg (cradle to gate)

International technology group ANDRITZ has received an order from Sioen Technical Felts to supply a complete needlepunch line for its production plant in Liège, Belgium. The new line will enable Sioen to produce heavy fabrics in a single step.

Sioen’s Liège plant specializes in the production of technical fabrics used mainly in industrial applications such as pipe lining (CIPP), acoustics, and filtration. The ANDRITZ equipment will allow the customer to produce fabrics of more than 3,500 gsm in a single step, using different types of fibers (recycled PET, OxPan, bicomponent,…) and finenesses. Normally two or three layers have to be needled off-line in a second step to achieve such a fabric weight.

The single-step process results in a higher quality end product by minimizing the risk of delamination, i.e. the separation of layers during use. It also increases productivity by reducing the need for fabric handling.

The ANDRITZ DF-4 needleloom, which can operate in double and single stroke modus, gives Sioen high flexibility to process fabrics with different mechanical charasteristics. Operators can easily switch modes via the remote-control touch screen. The line will be equipped with ANDRITZ’s latest fabric weight profiling technology, ProWin™, to ensure maximum weight evenness.

Start-up of the new needlepunch line is scheduled for Q1 2025.

The Lectra Group company announced a new collaboration between TextileGenesis, the textile traceability platform and the Forest Stewardship Council (FSC®). It will enable the implementation, via the TextileGenesis platform, of new solutions to ensure the traceability of cellulose fibers from responsibly managed forests.

In fashion, many textiles such as viscose, lyocell and modal use man-made cellulose fibers. These fibers are themselves made from wood pulp, the production of which can contribute to deforestation.

Founded in 1994, the Forest Stewardship Council (FSC®) is an international NGO whose mission is to promote responsible forest management worldwide. In particular, the organization offers certification for products and raw materials which have been obtained from wood grown in responsibly managed forests, and comes from supply chains where social rights of workers, communities and indigenous peoples have been safeguarded.

Amit Gautam, founder and CEO of TextileGenesis, explains: "We've already been working with Man Made Cellulosic Fiber Producers for several years to facilitate, thanks to our blockchain-inspired technology, the traceability of fibers manufactured by the most virtuous producers, and we've integrated their analysis criteria into our platform. By also becoming an FSC® partner today, we're taking things a step further. This new collaboration will support companies in the traceability of FSC certified fibers and support the administration and data management of FSC Chain of Custody certification. All players in the value chain will benefit from increased transparency and much more reliable upstream data. Fashion brands will be able to demonstrate much more easily that their garments use textiles made from responsibly sourced man-made cellulose fibers."

Fabian Farkas, FSC International Chief Commercial Director, adds: “We are seeing a rapid increase in interest in FSC certification from the textile industry, marking a very positive trend. Through this collaboration with TextileGenesis, we aim to simplify the administrative part of FSC certification for companies within the textile supply chain by automating many required data processes. Our goal is to empower brands to identify opportunities for seamless progress in meeting their FSC procurement policies.”

Following the signature in October 2023 of a memorandum of understanding with the International Cotton Association (ICA) and the launch last January of two consortiums with footwear and leather players, and more recently the announcement of its partnership with the Aid by Trade Foundation (AbTF), the initiator of The Good Cashmere Standard® (GCS), TextileGenesis confirms, with this new collaboration with the FSC®, its central place in the ecosystem of players mobilizing for more sustainable and responsible fashion.

Tintoria Finissaggio 2000 is one of the most important Italian companies in the textile finishing sector. Founded in 1973 in Masserano in the textile district of Biella, the company offers the complete range of dyeing of all types of fibres, finishing, digital printing, lamination and membrane lining. These processes are used to give fabrics certain properties, such as colour, pattern, softness, shine or waterproofness.

At Tintoria Finissaggio 2000, customers benefit from the fact that all processes are handled under one roof, from design support to the finishing of fabrics, combining decades of experience with the new possibilities of lamination and digital printing. The dyeing plant in Masserano is a state-of-the-art facility that fulfils the strictest environmental standards. In general, Tintoria Finissaggio 2000 continuously invests in state-of-the-art technologies and production facilities in order to achieve high-quality results while ensuring sustainable production processes.

Tintoria Finissagio 2000 also focused on innovation when equipping a new stenter frame. The company opted for the latest development from German machine manufacturer Mahlo GmbH + Co. KG: the Orthopac RXVMC-20 automatic straightening system. The new straightening concept is specially designed for processing textiles with high distortion dynamics, i.e. textiles with highly variable distortion. Two individually controlled and driven straightening modules with a total of three bow and four skew rollers ensure that bow and skew distortions are corrected in small steps. The control concept is also new. A scanner group at the infeed of the straightener detects distortions even before they reach the correction rollers. This means that the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outfeed also recognises any residual distortion, which is then corrected on the second straightening module.

Breaking new ground in plastics recycling means assessing the value chain from end to end. The big opportunities for the future are in fine-tuning the individual process steps; from the collection of recyclable materials to the recycling process and the end product. This is where the cooperation of Lindner and the EREMA Group comes in, officially launched following the 50/50 founding of the holding BLUEONE Solutions in August 2023 to which shares of Lindner Washtech were contributed. The expertise of EREMA, a manufacturer of extruders and filtration solutions for plastics recycling and the largest company within the EREMA Group, has now been combined with the expert know-how from Lindner Washtech, a leading provider of all-in-one solutions for shredding, sorting and washing plastic feed materials.

Data transfer ensures more efficient recycling processes
Process control is an especially important aspect of plastics recycling, which is why standardising the process control system was what the two companies focused on first. "Together, we have developed a platform that allows data to be exchanged between the extruder and the washing system," says Manfred Hackl, CEO of the EREMA Group at IFAT in Munich. "This enables us to analyse the data more precisely so that effective improvement measures can be deduced." All key parameters are taken into account and monitored via a digital interface. For example, it is possible to use information relating to the current throughput of the EREMA Pre Conditioning Unit to optimise the washing process as soon as possible so that it can compensate for fluctuations in capacity and achieve a significant increase in output. This data transfer represents a new step on the roadmap to digitalization.

High efficiency due to smart energy management
"To ensure sustainable recycling, it is necessary to find the right process for each application and to make sure that the individual process steps are perfectly coordinated," emphasizes Michael Lackner, Managing Director of Lindner. Coordinating the process steps has already achieved initial success in energy management, and a clear example of this is heat recovery. "We use the latent heat generated during the extrusion process as an energy source for the washing and drying process," explains Lackner. "This enables our customers to sustainably reduce their energy costs and carbon emissions".

Making the most of synergies along the value chain
Synergies need to be used to establish the quality standards specified for each end application. "The key question is how we can improve the end product and increase the overall efficiency of the recycling process at the same time," agree Manfred Hackl and Michael Lackner. This will only work if companies work together along the value chain. The industry leaders can already point to several examples where together they have improved recycling processes and made it possible to move away from downcycling. "An example of this is the recycling loop of HDPE starting material, which is processed into high-quality, food-safe rHDPE pellets using our two technologies," says Lackner. Lindner Washtech and EREMA continue to work intensively together to develop strategies for upcycling plastics and increase recycling rates.

AkzoNobel shareholders voted in favor of all resolutions at the company’s 2024 Annual General Meeting. As well as adopting the 2023 financial statements, the dividend policy and total dividend per share of €1.98 for 2023 were also agreed.
 
In addition, Mrs. Jaska de Bakker, Mrs. Ute Wolf and Mr. Wouter Kolk were appointed as new members of the company’s Supervisory Board. Mr. Byron Grote – currently Deputy Chair and Chair of the Audit Committee – was appointed for a fourth term of one year. Dr. Pamela Kirby completed her second four-year term and has stepped down as a member of the Supervisory Board.

On Thursday, April 18, 2024, the 80th Annual General Meeting of Lenzing AG discharged the members of the Managing Board and the Supervisory Board for the 2023 financial year and set the remuneration of the members of the Supervisory Board for the 2024 financial year in advance.

Dr. Markus Fürst retired from the Supervisory Board at his own request with effect from the end of the General Meeting. Dr. Markus Fürst has been a member of the Supervisory Board and various committees of Lenzing AG since 2021.

The General Meeting elected Dr. Cornelius Baur as a new member of the Supervisory Board of Lenzing AG until the end of the General Meeting that decides on the discharge for the 2028 financial year. In addition, Melody Harris-Jensbach’s mandate was extended until the Annual General Meeting that decides on the 2028 financial year.

The Supervisory Board of Lenzing AG continues to consist of ten members elected by the Annual General Meeting: Dr. Cornelius Baur, Mag. Helmut Bernkopf, Dr. Christian Bruch, Dr. Stefan Fida, Dr. Franz Gasselsberger, Melody Harris-Jensbach, Cord Prinzhorn, MBA, Mag. Gerhard Schwartz, Dr. Astrid Skala-Kuhmann and Nicole van der Elst Desai. DI Stefan Ertl, Stephan Gruber, Bonita Haag, Helmut Kirchmair and Johann Schernberger were delegated to the Supervisory Board by the works council.

In the constitutive meeting of the Supervisory Board following the Annual General Meeting, Cord Prinzhorn, MBA, was elected Chairman and Dr. Stefan Fida was re-elected as Deputy Chairman of the Supervisory Board.

KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed as the auditor for the annual financial statements and the consolidated financial statements for the 2024 financial year.

Stratasys Ltd. announced the appointment of Amir Kleiner as Chief Operating Officer. The 12-year Stratasys veteran will lead the company’s Global Operations, MIS, and Quality team, while continuing to manage the Customer Success team. The appointment is set to strengthen the connection between the Customer Success organization and the Operations and Supply Chain divisions.

Kleiner has served in numerous leadership positions during his Stratasys career. Previously, he served as VP of Global Operations, and for the past three and a half years as the Global VP of Customer Success, where he led improvements in customer experience and oversaw an increase in revenues from services to all-time highs.

Kleiner will succeed Yossi Azarzar who is stepping down to pursue family interests. He has been pivotal in leading our Global Operations, Quality, Facilities & Real Estate and MIS teams, preparing the company in its transition to providing manufacturing-grade solutions. A gradual handover of responsibilities will begin immediately.