From the Sector

Denim Expert Ltd. are very proud that they have been accepted to join as a contributor to the Zero Discharge of Hazardous Chemicals (ZDHC) Foundation, The ZDHC missions is to enable brands in the textile, apparel, and footwear industries to implement chemical management best practices and advance towards zero discharge of hazardous chemicals by collaborative Engagement, Standard Setting and Implementation.

The main goals are set to eliminate priority hazardous chemicals in products and their manufacture, implement a transparent screening process to promote safer chemistry, implement common tools, best practices and training that advance chemical stewardship, partner with stakeholders to promote transparency of chemical usage and discharge and promote scaling of best practices through engagement with key stakeholders.
 
Under the guidance of the ZDHC Foundation, Denim Expert Ltd. have adopted various initiatives to ensure the zero discharge of hazardous chemicals, including:

• The establishment of traffic signals in the chemical store-room to aid in the safe storage of chemical product.
• The mandatory use of protective gloves when handling chemicals.
• The introduction of a chemical compatibility chart to ensure safe storage of chemicals and highlight their risk factor.
• Visible posting of Material Safety Data Sheet (MSDS) enabling close follow-up of chemical use.
• The installation of the appropriate ventilation and  temperature control in the chemical storage area.
• Establishment of an emergency response plan, with any potential chemical spillage being monitored by a specially trained technical representative.
• Clear labelling on all chemicals following ZDHC guidance.
• Strict adhesion by all employees to the chemical inventory list.
• Allocation of a designated area for chemical waste disposal and treatment.

With its membership of the ZDHC, Denim Expert Ltd. joins more than 24 signatory brands, 59 value chain affiliates, and 15 associates (including Adidas, Benetton, BURBERRY, C&A, COOP, ESPRIT, Gap Inc. , G-STAR RAW, H&M,INDITEX, Jack Wolfskin, Lbrands, LEVI STRAUSS & CO, LI-NING, MARKS & SPENCER, Hugo Boss, Nike, Primark, Puma, PVH, Target)  who are collectively working together to support implementation of safer chemical management practices.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.

For the third consecutive year, the Italian brand Zerobarracento was selected to embody the excellence of Italy at the Budapest Fashion Week. On November 14th, Zerobarracento will show on runway S/S 2019. The concept of connection to a fashion garment, and the idea of creating pieces to last is fundamental to this brand. 0 means: zero waste, reduced pollution, and reduced emissions. 100 means: 100% quality, Made in Italy, sustainability and transparency of the production. Patterns are developed with zero-waste techniques, that eliminates textile waste at the design stage, adopting a zero-waste design approach reduces textile waste and the demand on natural resources. The pieces are 100% made in Italy, created with premium sustainable and traceable materials.

Camilla Carrara, CEO and designer of Zerobarracento, describes the collection as follows: "garments are created with the GOTS certified Bacx™ by Centro Seta organic silks sourced from C.L.A.S.S. e.commerce and the Newlife™ transformed polyester. Shapes and colours were inspired by a Malaysian trip: simplicity and nature are blended giving life to saturated colours".
We are pleased that the collaboration with the Budapest Fashion Week lasts over time and is positive to see the growing interest for the issue of sustainability by consumers of this country.

Candiani launches at Kingpins its new eco-smart denim range in partnership with ROICA™ from Asahi Kasei.

Both companies can claim their separate leading roles in textile innovation. Candiani, ‘the Greenest Mill in The Blue World’, is always at the cutting edge of new developments, and ROICA™ with its various premium stretch functions. Now they join forces through a unique synergy and an exclusive, custom made premium stretch sustainable ROICA™ yarn developed by Asahi Kasei especially for Candiani.

ReLAST is a range of market fresh responsible denim products, designed by Candiani that tick every smart box: from new ways in colouration, to better, more sustainable raw materials, new finishing and fade-tech that minimises water waste, and now with a key responsible stretch ingredient in a specially produced GRS certified ROICA™ yarn that perfectly completes this range making better, more sustainable, sharp fashions for customers looking to live and wear better with better values.

New Colouration values in the K-Seal range come from indigo applied with a water saving Indigo Juice® system. Or in the KN-Cotton range from cotton scraps recycled and dyed with Archroma earth colours. Both are sized with the Kitotex® Vegetal size derived from plants and natural renewables.
KN-Blue and Regen ranges use Sulfur dye and conventional Indigo dye using N-Denim tech and water saving Indigo Juice® respectively. The Regen range also uses Tencel and Refbra materials from Lenzing to add softness and a luxe touch to denims of the future.

All ranges in the ReLAST collection deploy the customized ROICA™ advanced sustainable stretch yarns.

With the ReLAST collection from Candiani and ROICA™ from Asahi Kasei rewrite the rules for responsible denim stretch manufacture, designing fashion forward denims that are now guaranteed completely 100% sustainable.

The evidence for excellence is underpinned by a qualified list of certifications that include GOTS (Global Organic Textile Standard) and GRS(Global Recycled Standard), Recycled Cotton Certification as well as registered affiliated processing methods for saving water (Kitotex® and Indigo Juice®). Branded raw materials with confirmed responsible status include Tencel and Refibra from Lenzing, Q-Nova recycled polyamide and of course the newly developed ROICA™ advanced fit, premium stretch yarn with full GRS certification.

Dedication to reaching the same goal pays off with the ReLast collection, a collaborative partnership with Candiani and ROICA™.

Koch Membrane Systems (KMS), a global leader in the development and manufacture of membrane-based filtration technologies, announces the commissioning of a PURON® PLUS packaged MBR system in Saskatoon, a city within the province of Saskatchewan, Canada.

The PURON® PLUS system provides a compact and turnkey wastewater treatment solution that is fully automated and provides consistent high-quality effluent for safe discharge or reuse.
 
Due to Canada’s challenging climate and dispersed populations outside of city areas, simple and reliable decentralized treatment systems are often preferred to treat municipal wastewater streams. As a differentiated membrane and system provider, KMS has been selected for this project due to their ability to provide a comprehensive solution with market leading technology.
 
For this project, KMS partnered with Proteus Water Inc., a Canadian company focused on providing integrated wastewater treatment solutions for small communities.
 
“We decided to go with KMS modules due to their reliable, compact and efficient MBR solutions,” said Jason Tratch, president and CEO of Proteus Water. “Compact MBR systems are the only answer for the small municipalities in Canada, meeting the financial expectations as well as the technical challenges. The PURON® PLUS system featuring PULSION MBR membranes is here with a very promising solution due to its increased efficiency and its decreased footprint.”
 
Capable of treating an average design flow of approximately 100,000 gpd (375 m3/d) of municipal wastewater, the PURON® PLUS P-100 system selected for this project features KMS’ latest innovative and patented PULSION® MBR technology. The benefits of PULSION® MBR offer best in class reliability and productivity with the lowest energy consumption.
 
“The efficiency and the reliability of MBR systems has been proven in thousands of places all over the world and it will be the best applicable solution for the Canadian market,” said Jack Noble, general manager Water and Wastewater (EMEA) of Koch Membrane Systems.

HUB 1922, the fashion division of the RUDOLF GROUP, takes the stage at the Kingpins Show in Amsterdam and presents new technologies that make it possible to move away from environmentally questionable industrial practices.
HUB 1922 also announces the opening of the new company building in an ancient textile factory near Milan.

It was only six months ago that the RUDOLF GROUP, with its fashion Division named HUB 1922, began its journey through the fascinating world of garment finishing. Since then, the team has made significant progress and has moved from being a newcomer to the business to a solid and reliable reality. “HUB 1922 introduces the Rudolf Group to design thinking,” says Alberto De Conti, Head of Fashion Division at Rudolf Group. “And when you break perceived restrictions and paradigms within a strongly science-driven organization, only sky is the limit.”

For an entire semester, the organisation remained focused on one, single goal without getting distracted from it: to become the partner of choice for environmentally conscious advancements in garment processing that are rooted in real experience and science.
Emphasis was put on listening attentively to the market and on engineering solutions proactively, without being prompted.

When it comes to Denim, two separate yet correlated calls for action were heard:
1. the need for a serious departure from established industrial practices that are environmentally questionable
2. the opportunity to change the current rules and stir toward enhanced product quality.

• HUB 1922, the fashion division of the RUDOLF GROUP, takes the stage at the Kingpins Show in Amsterdam and presents new technologies that make it possible to move away from environmentally questionable industrial practices.
• HUB 1922 also announces the opening of the new company building in an ancient textile factory near Milan.

Amsterdam/Geretsried/Milan. It was only six months ago that the RUDOLF GROUP, with its fashion Division named HUB 1922, began its journey through the fascinating world of garment finishing. Since then, the team has made significant progress and has moved from being a newcomer to the business to a solid and reliable reality. “HUB 1922 introduces the Rudolf Group to design thinking,” says Alberto De Conti, Head of Fashion Division at Rudolf Group. “And when you break perceived restrictions and paradigms within a strongly science-driven organization, only sky is the limit.”

For an entire semester, the organisation remained focused on one, single goal without getting distracted from it: to become the partner of choice for environmentally conscious advancements in garment processing that are rooted in real experience and science.

Emphasis was put on listening attentively to the market and on engineering solutions proactively, without being prompted.
When it comes to Denim, two separate yet correlated calls for action were heard:
1. the need for a serious departure from established industrial practices that are environmentally questionable
2. the opportunity to change the current rules and stir toward enhanced product quality.

Departure from the environmentally questionable

• HypNO: The next generation of bleach

Many attempts to technical alternatives to local and total denim bleaching have been launched in the market, over the past five years, by a number of competing players. Originality and innovation are at the base of HypNO technical uniqueness that can be injected into traditional denim processing, but that can also be used to create whole new processes and aesthetics.
Birth child of relentless dedication to science, HypNO is the latest alternative to the traditional denim bleaching agents currently under the spotlight because of their alleged safety issues. HypNO is the next generation of bleach.

- HypNO is based on the application of a whole new family of RUCORIT compounds, which are halogene-free and heavy metal-free
- HypNO can replace both potassium permanganate and sodium hypochlorite with one more eco-friendly solution
- HypNO is free from unpleasant smells; it is production friendly and suitable for both spray and bath applications
- HypNO does not require neutralisation with agents such as sodium metabisulphite or peroxides, hence reducing the need for chemicals significantly
- HypNO is GOTS approved. Bluesign and ZDHC Chemical Gateway certifications are intended
- HypNO further helps in the elimination of pumice stones
- HypNO is highly efficient and has been engineered to be cost competitive compared to other existing bleaching solutions

Toward enhanced product quality

• SoSoft, RawLong, DuraBlue

Durability over time still builds a brands’ reputation for quality. The notion of “durability” has changed over the years and has moved from sturdy workwear to the product's ability to retain its characteristics and structural properties.

“It goes against the whole denim philosophy, but, jeans are increasingly bought for what they look like at the time of purchase and are expected to evolve as little as possible. It is what it is; you can’t argue with consumers” says De Conti.

SoSoft, RawLong, DuraBlue, the three new technical concepts launched at Kingpins Amsterdam by the RUDOLF GROUP all sit under the umbrella wings of enhanced quality and specifically address long-lasting softness, preservation of original look and depth of blue.

• SoSoft

All appreciate the softness and suppleness of used/worn denim and the comfort benefit it delivers. It is a generic denim truth, and it is even stronger when it can extend over time. SoSsoft is about softeners carefully engineered for an enduring emotion, one that lives along favourite clothes.

Tried and tested to over 15 home washes, these marvels of chemical engineering allow consumers to toss domestic fabric softeners to the benefit of environmental sustainability.

• RawLong

Denim lovers want raw jeans to fade with time, soften and transform into what feels like an extension of their body. More often, people just want to prolong the look they chose. In both cases, home washing is a headache.

Years of testing have identified RawLong innovative, highly durable and natural solution that keep wearers fresh and at ease in their jeans allowing for long-wearing without washing. Moreover, less home washing means much less impact on the environment.

• DuraBlue

The role of designers is to come up with the bluest of blue jeans in a spectrum of fantastic new blue finishes and supporting textures. The role of DuraBlue is to ensure a continuously updated collection of technical solutions that keep that rich, deep, dark blueness of jeans for much longer while limiting the quality issues that come with denim rubbing. In other words, light underwear, snowy shoes, and white sofas no longer live in fear.

The launch of HUB 1922

• Busto Arsizio, Italy.

On a discreet street of Busto Arsizio, a village at the North of Milan is a red-brick building which in the 1800’s was the house of a textile mill. This 150-year-old structure is where the RUDOLF GROUP, the 100-year-old leader of textile, functional, responsible chemistry, is about to open its Fashion Division. Or, better, it’s HUB 1922.

HUB 1922 is committed to research and develop innovation within garment processing for the privately held mother company. HUB 1922, whose doors are expected to open during fourth quarter of 2018, will foster collaborative efforts with international fashion brands and retailers, will provide product innovation ideas at the crossroad of fashion and utilitarian functionality and will introduce elements of unorthodox diversity rooted in deep scientific knowledge, true environmental responsibility, technical innovation and creativity. “At a time when science plays such a powerful role in the life of society, it is incumbent on fashion to be dealing with scientific research. HUB 1922 facilitates that reunion” concludes De Conti.

• At Kingpins Show Amsterdam (24-25 October) the new “Committed Accessories” dedicated to denim take centre stage.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

NO IMPACT: “Committed Accessories” expanded

It is the constant search for sustainable innovation that reveals the extent of the progress made over the past few months by Metalbottoni. For the Kingpins Show exhibition, there are many novelties in store from the company, extending its range in terms of sustainability. Firstly, there is the new MONSTER line eco-processing, special for pure denim, which – apart from metal – includes new material solutions developed through high-profile collaborations.

Also the LEATHER ACCESSORIES line is extending its range of sustainable materials. The line of tags and rear waistband labels is enhanced through interpretations based on two new eco-friendly materials: recycled jacron and cork. For denim designed to be 100% green, also in accessories. Sustainable proposals are increasingly integrated throughout the Metalbottoni range, for example the new glossy and satin finishing developed for the line LABORA on exclusive metal accessories.

Partnerships with brands from northern Europe: Bik Bok and Kings of Indigo

One of the most important collaboration in sustainable fashion is the one with the Norwegian brand Bik Bok. The brand that was founded in 1973 dedicated to young women, today offer accessible trend driven fashion through a network of over 200 single-brand stores in Norway, Sweden, Finland and Austria. The brand has since 2017 chosen to use only BCI (Better Cotton Initiative) certified cotton for their in house premium denim brand Never Denim. For Never Denim Metalbottoni has realized a series of jeans buttons and personalized rivets, all entirely produced according to the NO IMPACT protocol; which means recycled raw materials, no use of chemical agents, through processing and machinery that minimize the use of water and electricity, resulting 100% from photovoltaic panels. All these features are part of a capsule developed for the new AW 2018 collection for Never Denim entirely made with Fair Trade certified cotton. Thanks to this project, the No Impact becomes an integral part of a collection that is aimed at a very large, young and aware public.

Another important brand which has chosen the new NO IMPACT metal accessories is Kings Of Indigo, the Dutch denim mill which is presenting top-quality jeans, inspired by traditional American style, combined with Japanese attention to detail, which today has as many 250 authorised dealers in 12 countries, with a very strong focus on northern Europe.

More and more sportswear for the new Monster SS 2020 collection

The great Metalbottoni classic dedicated to denim confirms the trend of strongly merging with the world of sportswear. The MONSTER line introduces the style developments of the SS 2020 season, with the range being more and more influenced by technical and sports interpretations, alongside sustainable production processes based on the NO IMPACT protocol. The new MONSTER proposals include items made of non-metal material, using sustainable processes, of natural origin and 100% biodegradable; these accessories are similar in appearance to traditional polyester, interpreted in a responsible way, developed through a series of special and unique effects. Also the button, rivet and small plate range has been restyled, having always been the core of the MONSTER line. Today the number of solutions available increases  hanks to new vintage finishing, developed on metal accessories, which are also totally green. “The denim world is moving in a clear direction: that of sustainability.” says Maria Teresa Ricciardo, Creative Director at Metalbottoni, “This is true in particular for some markets, which are strategic for us, and where we are proving increasingly successful, thanks to constant product and process research from a green  perspective, which Metalbottoni today is able to offer within the framework of the NO IMPACT pathway which we have been pursuing for a long time”.

Twelve companies from eight different countries will receive a JEC Innovation Award at JEC Asia 2018. Asia-Pacific is an innovative region that sets the tone for all other regions of the globe. Once again, the JEC Innovation Awards highlight how composites bring solutions considering the new challenges in terms of efficiency, sustainability and life-cycle analysis.

This year, JEC Group awards innovations in the following categories: aerospace (structural and tooling), automotive, commercial vehicles, e-mobility, marine, railway, sports & leisure, infrastructure & civil engineering, industrial equipment, sustainability and additive manufacturing.

The ceremony will take place on Thursday November 15, 2018 at the COEX Center of Seoul (South Korea). Ida DAUSSY (Seo Hye-na), will host the ceremony in front of officials, manufacturers, scientists and composites professionals.

Category: AEROSPACE – STRUCTURAL
Winner: CSIR National Aerospace Laboratories (India)

Most of the composite structures for aircraft are made of carbon-epoxy composites, which can withstand a maximum service temperature of 130°C. As a consequence, carbon-epoxy materials cannot be used in hot zones like engine vicinity areas. The Aeronautical Development Agency (ADA) and CSIR-NAL took up the challenge of developing high temperature resistant composites for use in hot zones of light combat aircraft, which would result in significant weight and cost savings, as well as a considerable reduction in the meantime between failures (MTBF) due to thermal ageing.

The first task was to choose a material system with a service temperature of about ~ 200°C. During the material selection process, it was found that BMI resins are a relatively young class of thermosetting polymers. Hence, a carbon-BMI prepreg was selected due to a number of unique features including excellent physical property retention at elevated temperatures and in wet environments.

It was realized that weight savings and performance can be maximized using co-curing technology. This results in a large reduction of fabrication cycle times, costs and weight. Co-cured structures have fewer fasteners, which results in shorter assembly cycle times and also reduces sealing issues.

A prototype engine bay door assembly was built and tested at 180°C for flight certification. The engine bay door consists of an inner skin and co-cured outer skin assembly with eight transverse stiffeners. The stiffeners were designed with ‘J’ sections. The door size was 1.5 m length, 1 m width and 0.4 m overall depth. The co-cured door was developed using autoclave moulding. Two doors were installed in prototype aircraft and successfully flown.

• 16-18 October 2018, Kay Bailey Hutchinson Convention Center, Dallas, TX

A skateboard, architectural panels and a rigid roof for boats – all three products rely on CHOMARAT composite reinforcements. The three designs will be on display at CAMX Expo in the demonstration area of COMPOSITES ONE, partner of CHOMARAT and leader in composites distribution in North America. CHOMARAT’s reinforcements enable to give unique properties to these three applications.

Proof positive: reinforcements offer design flexibility & improved mechanical performance

These three applications give CHOMARAT the opportunity to demonstrate the performance of its uniquely designed reinforcements in real time. “The skateboard combines Rovicore™, the multi-function closed-mold reinforcement developed by CHOMARAT, with C-Weave™, its woven carbon fabric that offers both structural performance and aesthetics to the design. Rovicore™ provides the permeability, while C-Weave™ provides the carbon aspect,” explains Brian Laufenberg, president, CHOMARAT North America.

During the live demos, architectural panels using Rovicore™ and a rigid boat roof in RTM will also be made. “With 60 years of expertise in designing composite reinforcements, CHOMARAT demonstrates that its reinforcements offer excellent mechanical performance and design for a large number of projects in sectors as diverse as sport and leisure, marine and building,” adds Travis IRVIN, Sales Manager and Closed Mould Process Expert at CHOMARAT.

Meet CHOMARAT teams at BOOTH V39 and see Live demos in the COMPOSITES ONE demonstration area at CAMX 2018 EXPO