From the Sector

• Move is in line with global growth strategy with a strong focus in the Asia Pacific region
• Zhejiang plant will be able to produce 50,000 tons of nylon compounds annually in the longer term
• Plant will be located in the convenient transportation port area of DuShan Pinghu city

DOMO Chemicals, a leading producer of high - quality engineering materials for a diverse range of markets, has announced plans for a new state - of - the - art plant in Zhejiang, China. The new plant will be capable of producing 50,000 tons of sustainable and innovative engineered nylon compounds each year. The company signed a new factory project through “cloud contract” with PingHu DuShan port Economic Development District on February 20, 2020. Production is expected to commence in the fourth quarter of this year.

DOMO Chemicals will invest €12 million in the new plant, which will have more than 11,500 m 2-floor space. The company plans to install multiple production lines at the first stage of development, which would offer an estimated capacity of 25,000 tons/year. There will be enough additional space available to cope with future demand requirements. The move is in line with the company’s global growth strategy with a strong focus on the Asia Pacific (APAC) region.

Diverging development in the two business units impact fiscal year 2019 of SGL Carbon – Group guidance for 2020 confirmed

• Consolidated sales revenues in fiscal year 2019 up by 4 percent to around 1.1 billion euros
• Consolidated recurring EBIT down by 25 percent to 48 million euros; record results of graphite specialities business did not fully compensate for the weak development in the carbon fiber business
• Composites – Fibers & Materials (CFM): Cyclical und structural weaknesses impact the result of the market segments Wind Energy, Textile Fibers and Industrial Applications, which have limited strategic significance in the medium term
• Graphite Materials & Systems (GMS): Sales and earnings on record level due to strong growth in the market segments Semiconductors and Automotive
• Non-cash impairment charge of around 75 million euros was recorded at CFM in the third quarter of 2019
• Free cash flow significantly improved
• Issue of a new corporate bond and early redemption of the 2015/2020 convertible bond has significantly improved the maturity profile
• SGL Carbon confirms guidance for fiscal year 2020: sales expected slightly below previous year; recurring EBIT approximately 10 to 15 percent below previous year level
• Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: “The financial development of the fiscal year 2019 conceals the fact that our strategic orientation is correct. This is evident from our growth and the increasing number of contracts and projects we acquired in our strategic core markets. Main drivers are the topics of sustainable mobility and energy as well as digitization. Therefore, we expect that we can grow our consolidated revenue by a mid to high single-digit percentage per year on average between 2020 and 2024.“

The fiscal year 2019 developed very differently in the two business units of SGL Carbon. The record results in the graphite specialities business could not fully compensate for the weak development in the market segments Wind Energy, Textile Fibers and Industrial Applications in the carbon fiber business. Group sales grew by 4 percent to 1.1 billion euros. Recurring Group EBIT declined by 25 percent to 48 million euros. Due to the ongoing weakness in the market segments Textile Fibers and Industrial Applications the business unit CFM recorded a non-cash impairment loss of 75 million euros in the third quarter of 2019. With minus 90 (prior year: plus 41) million euros, consolidated Group result declined significantly compared to last year’s good results. The Group confirms its guidance for 2020 published in October 2019.

Group sales are expected to decline slightly compared to the prior-year level, whereas Group recurring EBIT is expected to reach a result around 10 to 15 percent below the prior-year level. Consolidated net result of the Group in 2020 should strongly improve compared to prior-year level to a low double-digit loss.

In keeping with the brand’s internationalization strategy, Pinko is glad to announce an ambitious retail expansion plan in the Korean market.
The first phase of this retail project, developed in collaboration with Mitsui & Co. Italia and La Pace as local partner, saw the opening of two stores located inside two of the most important and prestigious Korean duty free shopping destinations.

The first Pinko shop in Korea opened its doors at the end of January at Seoul’s Shilla Duty Free Downtown Store, which houses the boutiques of the most prestigious global luxury brands. The inauguration of the second Pinko store in Korea was celebrated with an opening party on Feb. 20. This store is located in Seoul at the Hyundai Department Store Duty Free Dongdaemun, one of the most important Korean touristic attractions at day and night, thanks to its wide offering of merchan-dising categories, spanning from international luxury and fashion items to the highly popular Made in Korea beauty products.

Pinko’s retail expansion plan in the Korean market also includes the opening of two new stores by the end of 2020, while the company aims to operate a total of 14 boutiques, 6 inside department stores and 8 at Duty Free destinations, within three years.

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Stephan Sielaff is a chemical engineer who gained experience in the chemical industry in the years 1993 to 2014, holding various management positions for Unilever and Symrise. Since 2014, he has worked for the Swiss specialty chemicals company Archroma, an important supplier of the textile and paper industry, as a Member of the Board of Directors and Chief Operating Officer (COO).He has been responsible for forming the integrated operational structure and the strategic development of the company.

Christian Skilich, who will assume management responsibility for the new Pulp and Wood Raw Materials Division in the Lenzing Group, boasts outstanding expertise in the field of paper and pulp technology. With a Master of Science in Paper Technology and Engineering & Economics, he first held various positions in the paper, packaging and glass industries. Since 2004, he has worked in a broad range of management areas on behalf of the internationally operating Mondi Group. Christian Skilich most recently served as Chief Operating Officer on Mondi’s Board of Directors, overseeing projects in the USA and Europe.

At this year’s JEC World, the largest trade fair for composites held from March 3-5, 2020 in Paris, SGL Carbon will focus on the topic of serial production for the automotive, aerospace and industrial sectors. The key is customized solutions with individual component designs combined with tailored materials and production processes ready for large scale production. Under the motto “The Solution Provider,” the company will present selective innovative component solutions from all three areas in Hall 6, Booth D25. Furthermore, as an example for industrial applications, SGL Carbon will showcase at the JEC world a crossbeam made of carbon fiber reinforced plastics (CFRP) used in automated Schuler press lines.

•    Composite battery enclosures for e-mobility
•    Flexible new leaf spring generation for rear axles
•    Innovative component designs for passenger airplanes, helicopters and air taxis
•    Extremely lightweight and stable transfer beam for mechanical engineering

Selective applications with focus on serial production
In the field of automotive applications, SGL Carbon will present at the JEC World composite battery enclosures as a promising new application driven by increasing demand for electric vehicles and the resulting new flexible chassis platforms. The company demonstrates a prototype of a battery enclosure based on carbon fibers. However, hybrid composites with a mixture of glass and carbon fibers are also possible.

In the aerospace sector, SGL Carbon is also expanding its portfolio of realized projects and expertise relying on the trend to use more efficient materials and processes in this industry too.
In the area of primary structure components, the company will present a demo exhibit for the door frame of a passenger airplane realized in collaboration with external partners and based on 50k carbon fiber from the SGL Carbon, which is suitable for serial production.

Live simulations and intense exchange at the booth
Visitors can experience live how their ideas can be implemented both sustainably and cost-effectively in composites thanks to simulations. Experts from the company’s own Lightweight and Application Center demonstrate the path from the concept to virtual prototypes using simulation software, with the result visible either to the entire audience or just individual visitors. To prepare, interested parties can contact the team now at the following link: https://www.sglcarbon.com/anmeldung-jec.

On March 4, 2020, the SGL Carbon stand will host its traditional get-together for customers and friends starting at 4 p.m. – no registration necessary.
 

At JEC World 2020, MECELEC COMPOSITES is a finalist of the JEC Innovation Awards in the Design & Furniture category. The Group announces the launch of a new sustainable development application on the urban design market. MECELEC COMPOSITES designed the first mass-produced flax fibre roofs for the 550 Morris columns installed by JCDecaux in Paris. “This is the first application of flax fibre BMC for mass production. The new solution combines all the advantages of composite materials, lightness and strength, with stringent environmental requirements and is adapted to the safety constraints of this kind of street furniture,” says Bénédicte Durand, Chief Executive Officer at MECELEC COMPOSITES.

A COMPOSITE ROOF THAT IS BOTH INNOVATIVE AND GREEN
The dome of the Morris columns is composed of 23 different parts, 14 of which are made from composite materials. To design the roof, MECELEC COMPOSITES developed a new RTM complex and a new BMC material, that is reinforced exclusively with a flax mat. “Today it is the only BMC with a 100% flax fibre reinforcement, which uses a partially recycled ABS resin. It was created specifically for this project and we had to work on the processes in order to adapt them to this new material,” explains Bertrand Vieille, Head of sales.
In the design, MECELEC COMPOSITES replaced the bonding process with a time-saving mechanical assembly process using an invisible fixing system.

AN ECO-FRIENDLY APPLICATION IN LINE WITH THE GROUP’S ECO-DESIGN CSR APPROACH
MECELEC COMPOSITES creates scalable, sustainable and environmentally-friendly street furniture. The Group is committed to developing a sustainable production process and reuses all its waste materials. MECELEC COMPOSITES R&D laboratory promotes eco-design with a process of characterisation and mechanical sizing of parts. “For this project, we imagined, created, produced and delivered a mass-produced composite application with a low environmental impact within less than a year. At the end of its lifecycle, the product completely breaks down, leaving no fibre residue,” Bénédicte Durand concludes.

• Increasing demand for graphite-based automotive solutions
• Strengthening SGL Carbon’s site in Bonn

Over the past three years, SGL Carbon has invested a total of around 25 million euros in the modernization and expansion of its production capacities for specialty graphite automotive components at the Bonn site. The expansion project was completed at the end of last year and was inaugurated today at the site in an official ceremony. Besides the installation of partly new production facilities and a modernized production set-up, construction of a new, 2,000 m2 large hall for the production of the parts was implemented in the course of the expansion.

The background of the expansion is the continuously increasing demand for advanced solutions and products made from graphite in the automotive sector. Due to its durability, high strength, low friction behavior, and high conductivity, the material is suitable for many different automotive applications. Examples include rotors and vanes in vacuum pumps for brake boosters, bearings for exhaust gas management, and sealing rings and bearings for seals in coolant pumps. These solutions include applications for vehicles with conventional combustion engines as well as for e-mobility, thereby making an important contribution to clean driving, higher energy efficiency, and lower emissions.

“Automotive components made from specialty graphite are increasingly becoming the standard in many different applications in the automotive industry. Due to their special properties, they are more and more frequently replacing the materials previously used in pumps and seals, such as plastic and metal. By investing in the modernization and expansion of production in Bonn, we are consolidating our leading position in this market and offering our customers real added value in the close partnership with each other. Through the expansion, we are also strengthening our site in Bonn,” explains Burkhard Straube, President of the business unit Graphite Materials & Systems.

Sustainable packaging solutions are a hot topic all over the world. Sappi, market leader in innovative packaging barrier and sealable papers, is already producing such solutions and can point to numerous successful examples. Demand from customers and interested parties from a wide spectrum of industries continues to grow. The world’s leading paper and paperboard manufacturer therefore recently added two new grammages to its Sappi Seal range. In addition to the 67 g/m² version, the new 85 g/m² and 100 g/m² papers enable branded goods manufacturers to package an even more extensive variety of products with this functional paper – either as primary or secondary packaging.

The requirements for packaging papers are becoming increasingly demanding. They need to offer greater functionality, be environmentally friendly, recyclable and provide optimal protection for the packaged products. While many paper manufacturers are still talking about such multi-functional solutions, the innovation leader Sappi has already expanded its portfolio. The 85 g/m² and 100 g/m² grammages are now available in the Sappi Seal product family. Converters and manufacturers of food products, such as sugar, tea and confectionery, as well as non-food items, like children’s toys and DIY products, now have even more possibilities to use this functional paper and move from fossil-based materials to environmentally friendly packaging. The wide range of projects that Sappi has already completed for well-known customers, highlight its relevance for the market.

• Focus on Productivity and Efficiency

MS Printing Solutions at the next Heimtextil will focus on presenting textile printing solutions to boost cost-effective and high-quality productions, answering to Industry leaders in home and contract textile who need: productivity, quality and beneficial production process.

Attendees will see a JP4 EVO 3200 printer at work, with Bellagio reactive ink made by JK Group. This is one of MS' solutions which streamlines printing processes, reduces production times and maintenance costs, improving efficiency by:

• making the best use of production buildings, minimizing the space occupied by printers: JP4 EVO is compact and functional.
• taking full advantage of manufacturing-process, reducing downtime therefore improving productivity-performances: JP4 EVO can be fed by external roll unwinder ensuring timing optimization.
• using inks with a custom-made waveform, lowering the most common defects due to the interaction between ink and printheads, improving your productivity and competitiveness

The show will be the occasion for the Technical and Sales Teams to illustrate all details which characterize Minilario.  The printing machine, launched at the last ITMA, is the ideal choice for those searching for: flexibility, quality, speed, energy efficiency and sustainability, all in one.

The 64 print heads installed on the innovative printing carriage allow Minilario to reach the shocking but real printing speed of 18m/min, fitting the Home and contract textile demand of productivity and quality, applying a cost-effective production process.

The show will offer the opportunity to remark MS's sustainability commitment, started with #transparentaswater project based on the 100/90/10 paradigm aimed to engage the whole Textile Printing Industry in a big change. The commitment continued with MS’s adhesion to the “Sustainable Technologies” project launched by ACIMIT which selects textile machinery and systems manufacturers whose production specifications ensure a low environmental impact, combining sustainability and innovation. MS' printing machines may boast “Green Label” as “Suppliers of Sustainable Technologies” (come and visit us to go deeply inside our sustainability commitment).

A successful autumn season for Sappi at a collection of trade fairs, with exceptional interest shown in innovative packaging papers

Sappi Europe has presented its solutions for sustainable, future-oriented packaging at three trade fairs in the past few weeks. The globally operating paper specialist’s extensive product range has been serving as a benchmark in the industry for years and now includes the functional barrier papers from the Sappi Guard family, the sealable packaging paper Sappi Seal and the folding boxboard Atelier. The showcasing of innovations in sustainable packaging papers will continue at interpack in Düsseldorf in May 2020.

“Environmentally friendly packaging” was the first leading theme of FachPack, which, according to Messe Nürnberg, really had its finger on the pulse. This theme also was given top priority by visitors that were attracted to the Sappi stand, by its wide range of innovative and sustainable application solutions.

Huge demand for specific projects
Almost fifty per cent more branded goods manufacturers, converters, established customers and interested parties visited the FachPack stand in Nuremberg compared to the previous year – with specific projects in mind. For those planning to replace composite packaging with a paper-based solution with integrated functionality, Sappi presented its Sappi Guard barrierpapers and highlighted some related best practice references. This included the packaging solution for a new nut-fruit bar, recently introduced to the market, from a well-known brand manufacturer. The Sappi Guard range includes Sappi Guard M and Sappi Guard MS with a mineral oil barrier (MOB) and a grease barrier of Kit 11 or Kit 7. All Guard papers guarantee very high product safety and can be completely recycled. The integrated heat sealability was the focus of the development of Sappi Seal. René Köhler, Head of Business Development Packaging and Speciality Papers at Sappi, says: “Reducing the consumption of fossil resources in packaging is a major concern for Sappi. On this account, we developed Sappi Seal, a functional paper with integrated heat sealing functionality which is integrated in the form of a dispersion coating on the reverse side of the paper and can replace papers with a PE coating.” Sappi presented a wide range of successfully completed projects in order to demonstrate the specific application of this paper to the trade fair visitors.