From the Sector

• Sales and recurring EBIT significantly decreased in first half of 2020

As expected, the second quarter of SGL Carbon was impacted by the Corona pandemic, but not to the extent predicted in May when the quarterly statement for the period ended March 31, 2020 was published. Sales in the three months as per end of June decreased approximately 23 percent year-on-year, whereas Group recurring EBIT was at around 2 million euros and thus higher than anticipated. In total, SGL Carbon reached Group sales of 457 million euros in the first half year. This corresponds to a decrease of around 19 percent year-on-year. The decline is due to a pandemic-related overall weaker business development as well as expected declining developments in the market segments Battery & other Energy (GMS) and Textile Fibers (CFM) due to capacity adjustments. Group recurring EBIT was down approximately 71 percent to 11 million euros.

At a glance*:

• Sales in the second quarter approximately 23 percent below prior-year period; Group recurring EBIT of around 2 million euros was slightly better than anticipated at the presentation of the results of the first quarter 2020
• Group sales in the first half year 2020 at almost 457 million euros and thus around 19 percent below the prior-year period; decrease in sales due to pandemic-related overall weaker business development as well as expected declining developments in the market segments Battery & other Energy (GMS) and Textile Fibers (CFM)
• Group recurring EBIT down approximately 71 percent to 11 million euros
• As a result of measures taken at an early stage and contrary to the normal seasonal trend, cash and cash equivalents at nearly 154 million euros as of June 30, 2020 developed very positively compared to the end of 2019
• According to the full year forecast published on July 28, 2020, SGL Carbon expects Group sales to decline by 15 to 20 percent and a slightly positive operating recurring EBIT
• Dr. Torsten Derr, CEO of SGL Carbon: "My ambition is to achieve lasting success with SGL Carbon. Over the past two months, we have been conducting a comprehensive analysis of our processes, structures and markets. Based on this, we will identify the options that will enable us to sustainably increase our profitability. The Corona pandemic is forcing us to act even faster."

*Please read the attached document for more information

• Nachhaltiges Bauen mit Carbonbeton: schnell, kostenreduziert, umwelt- und ressourcenschonend

Carbonbeton bringt zahlreiche Vorteile in der bautechnischen Verstärkung und Instandsetzung mit sich, speziell auch bei der Sanierung von Industriefußböden. Die HITEXBAU GmbH produziert auf Wirkmaschinen neuester Bauart und mit eigenen Beschichtungsanlagen Armierungsgitter für Beton aus Carbon, Basalt und AR-Glas. In einem innovativen, vollautomatischen Prozess können besonders großflächige und vielfältige Hochleistungs-Carbongelege kostengünstig für die Baubranche hergestellt werden. Wie zum Beispiel für die tschechische Firma Immogard s.r.o., die an verschiedenen Standorten Industrieflächen vermietet, u.a. im Industriepark Libravské Údolí. Hier waren rund 3.000 m² Industrieböden in drei Hallen zu sanieren. In Kooperation zwischen HITEXBAU und der Koch GmbH, Kreuztal, einem Spezialisten für Carbonbetonanwendungen im Sanierungsbereich, wurde ein Instandsetzungskonzept erarbeitet.

Spezielle Projektanforderungen: Hohe Traglast auf schwierigen Untergründen

Aufgrund der stark sanierungsbedürftigen Böden und sehr schwieriger Untergründe – minderfester Altbeton mit partiellen Ausbrüchen und Rissen, teilweise mit nicht tragfähigen Beschichtungen – war es wichtig, eine robuste und dauerhafte Lösung zur Erneuerung des Fabrikbodens umzusetzen. Zudem mussten hohe Nutzungsanforderungen als Produktionshalle mit dynamischen Sonderlasten durch bis zu 15 Tonnen schwere Maschinen sowie Staplerverkehr berücksichtigt werden. Die Randbedingungen und Gegebenheiten ergaben zwei Alternativen für die Erneuerung der Hallenböden: Den kompletten Rück- und Neubau der Böden aus Stahlbeton oder die Sanierung mit Carbonbeton.

Bodensanierung mit Carbonbeton: schneller und preiswerter

Nach Kostenermittlung beider Varianten empfahl sich eindeutig die Sanierung mit Carbonbeton. Diese brachte auch weitere, wesentliche Vorteile mit sich: Eine sehr schnelle Instandsetzung mit geringen Ausfallzeiten von lediglich 2 bis 3 Wochen vom Start des Projektes bis zur vollen Belastbarkeit und Nutzung des Bodens mit schweren Maschinen und Staplern. Zum Vergleich: Der vollständige Rück- und Neubau einer Stahlbeton-Bodendecke von 12 cm Stärke, ohne Beschichtung, würde 8 bis 10 Wochen benötigen. Im Kostenvergleich lag die Carbonbeton-Variante ca. 20 % unter der Stahlbeton-Variante. Die Instandsetzung mit Carbonbeton eines weniger geschädigten Bodens ohne Sonderbelastungen ergäbe einen Preisvorteil von über 30 %.

Unterschiedliche Carbon-Gelege: von flexibel bis starr und mit diversen Geometrien

Ziel der Instandsetzung war ein mechanisch stark beanspruchbarer, abriebarmer Boden. Für die neuen Industrieböden der drei Fabrikhallen – eine große Halle mit ca. 2.300 m², eine Halle mit ca. 380 m² und eine Halle mit ca. 600 m² altem Fliesenbelag – kamen je nach Erfordernis unterschiedliche Arten der Untergrundvorbereitung (Stemmen, Fräsen, Schleifen, Kugelstrahlen) zur Ausführung. Nach der Grundierung der Flächen wurden rund 5.000 m² der Carbonbewehrung verlegt. Optimal abgestimmt auf die unterschiedlichen Oberflächen wurden nach vorherigen Tragfähigkeitsberechnungen flexible und starre Gitter-Gelege diverser Geometrien kostenoptimiert verwendet.
     
3.300 m² Bodensanierung mit Carbonbeton in nur 2 bis 3 Wochen

Die Instandsetzung von industriellen Böden mit Carbonbeton erfolgt in sechs zeitnahen, zum Teil abschnittsbezogen, parallellaufenden Schritten: Abfräsen, Kugelstrahlen, Grundieren, Carbon-Gelege aufbringen, Egalisierungsschicht, abriebfeste Deckschicht.

• Italian creativity merges with Chinese technological innovation to create a new capsule collection
   

A new era is born in the world of denim, Paolo Gnutti and Advance Denim will combine their skills to create capsule collections for both the US and Asian markets.

These collections will combine Paolo Gnutti’s artistry and Advance denim’s technological innovation to create “magical” inspiration that is with the reach of all brands.

Advance Denim has the distinction of being the oldest denim manufacturer in China and has dedicated its efforts since day one around the core beliefs of innovation , service , quality and people. These core beliefs are the foundation of their day to day focus of becoming a world leader in denim. They are also  committed to making the most sustainable denim possible and they are constantly investing in the infrastructure and systems that will help them to reach aggressive sustainability goals . Sustainability is important but Advance Denim has always been true to denim and strive to produce innovative high-quality products that exceed the needs of the market

“We are looking forward to Paolo bringing his Italian artistic aesthetics to our denim.” Said Ms. Amy Wang, General Manager of ADVANCE DENIM. “ We believe it is the combination of eastern and western design and culture that have never been offered to our customers before and will take Advance Denim to a whole new level. It is our goal to also offer these high quality designs at a competitive price from our Vietnam facility.” conclude Ms. Wang.

Paolo Gnutti, a life time dedicated to denim innovation and creativity, bases the creation of his collections following  precise themes and  stylistic contaminations. He uses indigo bases which are completely transformed thanks to the use of flocks, 3D prints, colored foils and metallic effects.

Paolo Gnutti has the ability to conceive ground breaking fashion, thanks to his incredible creativity and visionary irreverent combination that ushers in a new concept of  fashionability to the denim world.

“ My passion and my professional exploration lead me to acquire the skill needed to develop unforgettable and unique textile concepts” said Paolo Gnutti “ I’m trilled to begin this collaboration with Advance Denim. I feel that we need a new challenge in our denim world, a new era of true globalization; we will create a capsule collection that will reach all customers, from premium to the mass market.”

A new era begins, based on the evolution of the  market and the search for innovation and inspiration that is both technically performance driven and accessible to all brands.

• Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

Amongst them are TMAS members of the ACG Group, who quickly established a dedicated new nonwovens fabric converting and single-use garment making-up plant to supply to the Swedish health authorities. From a standing start in March, this is now producing 1.8 million square metres of converted fabric and turning it into 692,000 finished medical garments each month.

“In 2020 so far, we have seen new value chains being created and a certain amount of permanent reshoring is now inevitable,” says Premler-Andersson. “This is being backed by the new funding announced in the European Union’s Next Generation EU plan, with €750 billion marked for helping industry recover. As the European Commission President Ursula von der Leyen has stressed, “green and digital” transitions hold the key to Europe’s future prosperity and resilience, and TMAS members have new solutions to assist in both areas.”

Remote working

Automated solutions have opened up many possibilities for remote working during the pandemic. Texo AB, for example, the specialist in wide-width weaving looms for the paper industry, was able to successfully complete the build and delivery of a major multi-container order between April and May.

“Our new Remote Guidance software now makes it possible for us to carry out some of the commissioning and troubleshooting of such new lines remotely, which has been helpful” says Texo AB President Anders Svensson.

Svegea of Sweden, which has spent the past few months developing its new CR-210 fabric relaxation machine for knitted fabrics, has also successfully set up and installed a number of machines remotely, which the company has never attempted before.

“The pandemic has definitely led to some inventive solutions for us and with international travel currently not possible, we are finding better methods of digital communication and collaboration all the time,” says Svegea managing director Hakan Steene.

Eric Norling, Vice President of the Precision Application business of Baldwin Technology, believes the pandemic may have a more permanent impact on global travel.

“We have now proven that e-meetings and virtual collaboration tools are effective,” he says. “Baldwin implemented a home office work regime from April with only production personnel and R&D researchers at the workplace. These past few months have shown that we can be just as effective and do not need to travel for physical meetings to the same extent that was previously thought to be necessary.”

Pär Hedman, Sales and Marketing Manager for IRO AB, however, believes such advances can only go so far at the moment.

“Video conferences have taken a big leap forward, especially in development projects, and this method of communication is here to stay, but it will never completely replace personal meetings,” he says. “And textile fabrics need to be touched, examined and accepted by the senses, which is impossible to do via digital media today. The coming haptic internet, however, may well even change that too.”

Social distancing

The many garment factories now equipped with Eton Systems UPS work stations – designed to save considerable costs through automation – have meanwhile benefited from the unintentional social distancing they automatically provide compared to factories with conventional banks of sewing machines.

“These companies have been able to continue operating throughout the pandemic due to the spaced nature of our automated plant configurations,” says Eton Systems Business Development Manager Roger Ryrlén. “The UPS system has been established for some time, but planned spacing has proved an accidental plus for our customers – with improved productivity.”

“Innovations from TMAS member companies have been coming thick and fast recently due to their advanced know-how in automation concepts,” Premler-Andersson concludes.  “If anything, the restrictions imposed by the Covid-19 pandemic have only accelerated these initiatives by obliging our members to take new approaches.”

• RUDOLF GROUP is thrilled to unveil the perfected antiviral features embedded in RUCO®-BAC AGP, the Company’s flagship antimicrobial product for textile applications.

As a consequence of COVID-19 global pandemic the demand for chemical auxiliaries with antimicrobial effect has boomed. RUDOLF GROUP invested important resources in the meticulous assessment of a new antiviral feature which is now added to one of their leading technologies .

Such an effort returned the surprisingly fast and most comprehensive antibacterial and antiviral textile finishing on the market: RUCO®-BAC AGP.

History has led to great vision and innovation

The powerful antimicrobial effectiveness of RUCO®-BAC AGP is rooted in the extraordinary properties of silver, whose antimicrobial magic is lost in the mists of time. Already known by the ancient Romans, Greeks and Egyptians, water and milk were preserved by using silver coins through the early modern age.

R&D at RUDOLF GROUP has mounted silver on highly sophisticated, functional and registered microstructures that strengthen and amplify the qualities of this noble metal.

RUDOLF’s proprietary microstructures are the responsible hidden secret and key technical breakthrough behind both efficacy and durability of RUCO®-BAC AGP. This innovation is now the preferred solution to help reducing proliferation and cross-contamination of bacteria and enveloped-virus on textiles.

One gram of microstructures has the astonishing superficial area of about 60 m². The advantage of a much higher surface is that the consumption of resources and dosages can be minimized by the factor 100 and that makes RUCO®-BAC AGP a highly conscious choice.

“Due to the microstructures, a virtually infinite protective shield is created in the textile from which highly effective positive silver ions are set free in small, exactly dosed quantities” says Dr. Dirk Sielemann, R&D Director at Rudolf Group.

Taking performance to the next level

RUCO-BAC AGP effectively protects any textile against bacteria (harmful and odour-causing) and its superior antiviral performance on textiles has been independently demonstrated by applying the most modern testing methods. Assessments were carried out on enveloped Coronaviridae families known to cause a broad spectrum of animal and human diseases.

The microstructures in RUCO®-BAC AGP trigger their powerful antibacterial and antiviral effects based on 3 distinctive inhibiting mechanisms:
1.    Blocking of oxygen-transporting enzymes therefore leading to impaired growth;
2.    Crushing of disulfide bonds and therefore structure of sulphur-containing proteins.
3.    Possible interference with Bacteria and virus surface protein in the membrane.

RUCO®-BAC AGP is intended for the protection of the treated textiles and the microstructures of RUCO®-BAC AGP were studied thinking of performance and safety. It is suitable for next-to-skin applications and cytotoxicity tests show that RUCO®-BAC AGP has no influence on the natural microflora of the skin. Furthermore, because of the adhesion mechanism of its microstructures, RUCO®-BAC AGP is only active in/on the textile and it is non-migrating. 

“This year 202o is being highly emotional and it’s leading to the widespread introduction of antimicrobials on textile and to a myriad of vague, misleading or unsubstantiated marketing claims”, states Dr. Gunther Duschek, Managing Director at RUDOLF GROUP. He concludes “As a highly responsible company, we move cautiously and stand for technologies and practices that are effective, truthful and limit the exposure of apparel manufacturers, retailers and buyers to any risk”.

Technologies with an excellent environmental performance throughout the entire product life cycle – that is what “Autoneum Pure.” stands for. In future, components that meet the highest standards in terms of sustainability and eco-friendliness can be identified at a glance under this label. This also includes the innovation “Mono-Liner” for wheelhouse outer liners.

As innovation leader in acoustic and thermal management, Autoneum continuously invests in the development and production of resource-saving components that make cars lighter and thus more climate-friendly. In view of an increasing sustainability awareness and the correspondingly greater information needs on environmentally-friendly vehicle components, the Company has now launched Autoneum Pure. The label determines particularly sustainable technologies, thereby guiding car manufacturers in product selection for future models.

Autoneum Pure is based on a comprehensive set of criteria assessing the sustainability performance of a product in all four phases of its life cycle: material procurement, production, use and end of life. For example, components with a high content of recyclable materials or those that achieve significant weight savings compared to comparable standard components qualify for the “Autoneum Pure.” label. Autoneum already offers various multifunctional technologies that meet the high standards for Autoneum Pure products: Ultra-Silent for underbody systems or battery undercovers, Di-Light for carpet systems, Prime-Light and IFP-R2 for inner dashes and floor insulators as well as Hybrid-Acoustics PET for e-motor encapsulations and engine-mounted parts, which was launched in fall 2019.

With Mono-Liner, the latest innovation for wheelhouse outer liners is also included in the Autoneum Pure portfolio. Among other things, the Mono-Liner-based components convince thanks to their lightweight construction, thereby contributing to lower vehicle weight with correspondingly less fuel consumption and emissions. The excellent life cycle assessment is also based on their particularly resource-saving manufacturing: Production cut offs of the components, which consist to a large extent of recycled PET fibers, can be processed into pellets and completely returned to the manufacturing process as fibers. An SUV and a crossover model from a US vehicle manufacturer already benefit from Mono-Liner wheelhouse outer liners.

Anahid Rickmann, Head of Corporate Communications & Responsibility, explains: “With Autoneum Pure we are the first automotive supplier to establish a sustainability label in the field of acoustic and thermal management. Autoneum Pure is part of the Company's Advance Sustainability  Strategy 2025 and sets industry standards in product communication.”

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.
Here, the meltblown technology from Oerlikon Nonwoven will be deployed. In a special, patented process, the fibers laid into a nonwoven fabric during manufacture are subsequently electrostatically-charged, before the material is further processed downstream.

European market for protective masks with a promising future
Those responsible at Oerlikon Nonwoven and FleeceforEurope, which will primarily focus on producing high-end nonwovens, and Lindenpartner, which will manufacture and distribute the protective masks, are certain of one thing: the market for protective masks has a very promising long-term future in Europe.
What has been commonplace in Asia for many years now will also become normal in Europe. People will be increasingly wearing face masks when venturing out, in order to better protect themselves against health risks such as the current pandemic and also against increasing environmental pollution in the form of  fine particles and exhaust fumes in the future. A

Medical face masks from a vending machine
Mask producer Lindenpartner has already secured supplies of nonwovens and will be producing face masks for the European healthcare sector over the coming weeks. To fight the coronavirus pandemic, Lindenpartner is planning to install 100 self-service face mask vending machines in Germany over the next four weeks, positioning them in publicly-accessible places such as shopping centers and airports, for example.

• Launched by SCOTT Sports Racing Team with Sitip, Rosti and ROICA™ by Asahi Kasei

The collection was designed starting from the needs of the athletes with the aim to offer them the best solution in terms of style and ergonomics, high performance, easy maintenance and perfect fit being also sustainable.

Ispo 2020 saw the celebration of the partnership started last year between Scott Racing Team, Rosti, Sitip and ROICA™ by Asahi Kasei for the supply of the team riders’ uniforms. Rosti worked on style and packaging, Sitip on technical fabrics ‘BE-HOT - Heat Generating fabrics’, while ROICA™ provided its premium stretch ingredient. The collaboration carries an interesting news: uniforms are not just highly performing but also, and above all, sustainable.

Sitip created the Native fabric entirely made with recycled yarns and featuring the premium high performing  ROICA™ EF elastomer. The yarn is certified GRS - Global Recycled Standard certification (and also provides special dyeability) with Rosti’s design and high care garment manufacturing.

The main rider of Scott Racing Team Italy, the young and award-winning champion Juri Ragnoli, the “end user” of the uniforms, explaines the requirements that garments should possess in order to meet the sporting challenges that await athletes: breathability, comfort on the skin, performance, durability of the shape and maintenance of the characteristics throughout the course of use of the garment. When asked about the arrival of a new sustainable uniform, the champion said that “it’s right and important to take this direction, which perfectly meets the team’s values, as love for nature and respect for the environment. It will be nice to wear something that follows exactly what you believe in”.

• Diana, Giusy, Simona and Marina. The call to action of the fashion world was born from four women engaged in the field of sustainability. On the occasion of Fashion Revolution Week, we tell you their story and the results achieved

A task force of Italian textile companies active in our area supported the first call to action launched at the fashion world by four women who have always been involved in the field of sustainability. The appeal launched on March 19th by the green journalist Diana de Marsanich, Giusy Bettoni, founder and CEO of C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy)the eco multi-platform hub specialized in integrating a new generation of eco values into fashion, products and companies, Simona Roveda, Editorial Director and Director of Institutional Communication of LifeGate and Marina Spadafora, Italian Country Coordinator of Fashion Revolution and currently collaborating with Luxury Fashion Brands to implement responsible strategies in their companies have luaunched a call-to-action project which has brought together textile companies to manufacture PPE garments for the medical staff working in San Gerardo Hospital in Monza, near Milan.

The companies that answered the call-to-action are: Filo d’Oro, Mantero, ROICA™ by Asahi Kasei, C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy) e Zerobarracento, Iluna Group, Lg Electronics, Jimmy Lion, Personal Genomics, Isamar Holyday Village, Marcolin Eyewear, Maglificio Ripa.

During the last weeks the 4 women collected about 1,800 non-drip cotton and non-woven TNT gowns for sanitary use, about 400 protective masks for multipurpose washable, bacteriostatic, breathable and water-repellent prevention, 1,000 washable cotton surgical caps, 150 complete protective googles eye masks, two microwave ovens for hospital departments to offer support to medical and healthcare personnel by helping them in the few breaks during the grueling shifts of this period, a supply of samples of cotton socks, 300 cotton masks + polyester outer layer, water-repellent and antibacterial, and free weekly stays made available to doctors, nurses, civil protection personnel and families with related children involved in the Covid-19 pandemic.

Within the context of a globally-networked textile industry, online services have become essential for maintenance, modernization and original parts procurement processes for machines and systems.
Here, the Oerlikon Manmade Fibers segment optimized the myOerlikon.com service portal for the products and services of its Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven brands, making it more userfriendly. It allows customers to now access tailored services in nine different languages and around the clock.

Each and every machine park usually has numerous associated documents, ranging from manuals, circuit diagrams and 3D drawing-supported original parts catalogs, all the way through to operating instructions and final documents. myOerlikon.com bundles this information, while also providing users with additional communications on potential machine modernizations and upgrades and on special offers tailored to the respective production system.

Real security during virtual shopping
At the same time, users can access the myOerlikon.com e-commerce platform, which operates in parallel.
Customers can not only place orders here, they can also send online inquiries to Oerlikon, view prices and warehouse stocks and track inquiries,
quotations and orders already made or placed, among many other things. As a result of online access to original parts catalogs for the respective customer machines and systems, erroneous orders can be avoided.
Log-in is secure for users, as are all transactions carried out using the platform. With this, Oerlikon is implementing real security for all virtual purchases. All data exchanged is fundamentally
encrypted and hence protected against unauthorized access.