From the Sector

• Gorilla Protect is a new company formed in May this year to promote the Catus face mask – a major leap forward in the effectiveness of personal protection products that are available to consumers in the fight against Covid-19.
• Behind Catus and the new company is Nova Textil, the established fabric finishing company based in Grefrath, Germany, and now run by father and son team Rainer and Oliver Hurtz.

Single stenter

Rainer Hurtz founded Nova Textil with a single Monforts Montex stenter and just five employees in 1999 and has steered its constant development and growth over the past twenty years.

“Our initial focus was on the coating of mainly glass fibre fabrics, awnings and sun protection products for outdoor furnishings,” he said. “We had a great customer who was providing us with so many orders that by 2005 we took the decision to order a second Montex stenter, in a special configuration. This also allowed us to enter the market for blackout and digital printing fabrics. We’ve had a great ongoing relationship with Monforts from the beginning.”

A third Montex stenter line was installed at the company’s Grefrath plant in 2015, by which time the company had grown to 40 people and a major new market had opened up in the supply of fabrics for promotional materials at exhibitions and trade shows.

“We had a fantastic two years in 2018 and 2019 and everything was going great for the first three months of this year, but in April it all came crashing down,” said Oliver Hurtz. “Coronavirus put an end to trade shows in 2020, which had a very serious impact on our business.”

At the same time, however, the company was exploring the potential of a new biocidal product from one of its chemicals suppliers which has both antiviral and antimicrobial properties.

Filtration

“We had already been producing coated fabrics for hot gas filtration and realised that in combination with this new microporous coating we had the basis for a very effective single-layer face mask,” Rainer said. “Achieving this with a single layer product rather than the usual three has resulted in a significant advance in comfort for the wearer and because the mask is able to disinfect itself and helps regulate humidity, it can be worn a number of times without needing to be washed, for greater convenience. It only needs to be washed when it gets dirty and can also be washed up to twenty times without losing its properties, which has to be preferable to single-use disposables.”

Catus face masks are based on 100% woven cotton and the active ingredients in the finish are a reaction mass of titanium dioxide and silver chloride certified to ISO 20743 for their antibacterial effect, and to ISO 18184 for their antiviral effect.

They are proven to  eliminate over  99.99% of the human coronavirus 229 E, with the multiplication of microorganisms such as germs and bacteria prevented by the biostatic action of silver salts and viruses destroyed by oxygen-releasing substances and a mechanism that attacks their fatty envelope. The virus membrane loses its cholesterol content and the virus is inactivated.

Colours

Gorilla Protect next plans to make the masks available in four colours – black, Bordeaux, olive and grey – and is also working on colour branding and printing labels.

“It’s not possible to print on the surface of the mask after it has been coated, but its is possible for volume orders to be printed before the treatment,” Oliver Hurtz said.

“Face masks are going to become an established part of life in the West like they are in Asia and need to be as comfortable and convenient as possible for the wearer,” his father concluded. “With these things in mind, we believe Catus is a significant step forward.”

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

To increase system productivity and to keep service downtimes as short as possible, remote servicing has long been absolutely essential within a globally-networked textile industry. For its Oerlikon Neumag and Oerlikon Nonwoven brands, the Oerlikon Manmade Fibers segment is offering a new secured remote service concept with defined loan-based hardware and software.

A remote connection with remote access to the systems creates new service options that would not have been possible over the phone or by e-mail. Upon signing a secured remote service contract, Oerlikon Manmade Fibers provides its customers with the necessary hardware and software, exchanges the hardware in the event of changes to security requirements and supplies continuous software updates.

“Within the context of a secured remote service contract, we loan the hardware to our customers. This means that our clients do not have additional procurement costs and they do not have to worry about ensuring their technology is constantly up-to-date in terms of security requirements. We assume this task for them”, explains Jan Pauer, Technical Sales Manager responsible for modifications, talking about the benefits of this service concept.

Secured remote service contracts are offered for all Oerlikon Neumag and Oerlikon Nonwoven sys-tems and are available with additional, customer-specific services.

Materials for in excess of one million protective masks
Within the context of supporting the critical infrastructure in Germany, Oerlikon Nonwoven immediately began converting its laboratory systems in Neumünster to manufacture nonwovens at the end of March. With this, only small local businesses and companies were initially supported in the manufacture of oronasal masks.
With the laboratory system at the R&D Center material for more than one million protective masks a month can be manufactured.

The laboratory has meanwhile run out of raw materials and new orders for replacement materials had to be placed before Easter – with current delivery times of approx. 3 weeks. This will allow production to be resumed, and even considerably expanded, in May.
The laboratory system is now once again being deployed to produce nonwovens that will be used to make more than million face masks / oronasal masks a month. “We will not be manufacturing the masks ourselves. We have meanwhile found both corresponding partner companies and also private individuals demanding nonwovens”, adds Andreas Frisch, commenting on the developments.

Boom in orders
Furthermore, Oerlikon Nonwoven has also fired up the production of the machines and systems used for its meltblown technology. The demand from Germany, Europe and the rest of the world has quickly
secured the company a high in orders..
We will be commissioning the first meltblown system at the site of a leading Western European nonwovens producers in the second quarter of 2020. The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon
Nonwoven systems.

In response to COVID-19, national governments have introduced a series of restrictions to slow the spread of the virus.
Attached is a map showing various constraints implemented by countries across Europe.

FOR POLYESTER AND “ACTIVE WEAR” COLOR TRENDS FOR WINTER 2021/2022

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, is at the Première Vision exhibition to present its 'Color Atlas by Archroma®' for polyester. This very first color library for polyester brings together 1,440 colors for sportswear and athleisure, swimwear, children's clothing, shoes, as well as for fashion and home textiles. In this context of innovation, Carlin, a pioneer in anticipating trends since 1947, will present its selection of trends in active wear and will unveil the 3 hottest colors for winter 2021/2022: “In our societies now ruled by the vital need for ENTERTAINMENT, the DIVERGENT "extroverted Slashers", free-spirited and efficient, stimulate a MAXIMUM SELF-EXPRESSION which combines communicative power and contagious adrenaline.

In terms of shapes, we imagine assertive, shaked, keeled proportions, with volume contrasts: ultra-tight and stretched volumes. Concerning the materials, this refers to compact knits, fine nervous gauges (neo milano stretch pop), embossed ribs, colored furs, knitted materials, city: ultra-matte color drapery, double sides, jeans, over dye, deep dye.”

Selected in collaboration with fashion, sportswear and trend experts, the Color Atlas by Archroma® Polyester Library brings together new colors for in line with current trends, from the most neutral tones to the most vivid hues to fluorescent colors.

Nach einer halbjährigen Einarbeitungsphase an der Seite von Jürgen Preusche übernimmt Ulrich Merzbach ab Januar 2020 die Werkleitung der Ontex Hygieneartikel Deutschland GmbH, Großpostwitz. Der 41-jährige gebürtige Rheinländer hat an der Technischen Hochschule in Karlsruhe sowie in Frankreich Wirtschaftsingenieurwesen studiert. Nach zweijähriger Tätigkeit bei der Lufthansa trug er über 14 Jahre lang beim Konzern Procter & Gamble Führungsverantwortung in der Produktion sowie beim Lieferketten-Management in der Sparte Pampers/Windeln.

• Construction of a new air purification and sulfur recovery plant
• Further improvement of the exhaust emission values at the Lenzing site
• Important step in achieving the CO2 targets of the Lenzing Group

Lenzing – The Lenzing Group is a global leader in the climate-friendly and sustainable production of wood-based textile fibers. Lenzing announced its climate targets in August of this year. By 2030, the company aims to reduce its specific CO2 emissions per ton of manufactured pulp and fibers by 50 percent. By the year 2050, the Lenzing Group will no longer generate any net CO2 emissions.

Lenzing‘s Management Board has now resolved to invest EUR 40 mn to expand the production of the raw material sulfuric acid at the Lenzing site. This comprises an important milestone on the path towards climate neutrality. In the future, a new air purification and sulfur recovery plant will not only optimize the company’s self-sufficiency for this raw material and enhance process reliability but improve environmental protection within the context of a clear forward-looking strategy.

Improved exhaust emission performance

The new plant represents an important contribution towards implementing the sustainability strategy of the Lenzing Group, and also helps to ensure an even higher level of environmental compatibility of all production operations at the Lenzing site. The application of state-of-the-art technologies will further improve exhaust emission values. Furthermore, the new facility will help further reduce the use of fossil fuels by generating steam which will, in turn, be converted into electricity. In this way, it will also support the energy self-sufficiency of the company’s operations in Lenzing.

Improved CO2 scorecard

As a result, the production plant in Lenzing will reduce its annual CO2 emissions by 15,000 tons. This is an important step towards further advancing the company’s ambitious plans in the coming years and also strengthen Lenzing’s leadership role as a driver of ecologically sustainable industry. “On the basis of these investments, Lenzing is taking the next step in achieving its climate targets. At the same time, it will also reach a significantly higher level of autonomy with respect to a vital raw material”, states Stefan Doboczky, Chief Executive Officer of Lenzing.

JEC Asia is the major, most insightful composites event in Asia-Pacific for products, solutions, net-working, and advanced industry thinking - 3 full days of Business, Innovation & Knowledge

JEC ASIA KEY FIGURES

• 7,000+ professional visits
• 245+ exhibiting companies from 49 countries
• 3 conference sessions
• 40+ International speakers
• 450+ business meetings
• Startup Booster competition
• Innovation awards and planet
• In parallel to eMove360° Asia

Paris - For its 12th edition and third time in Seoul, JEC Asia 2019 will gather companies from the entire composites value chain in Asia Pacific to present their latest capabilities and innovations to the composites community and the strategic end-user’s market including: Mobility, Aeronautics, Building & Construction. This year more than 245 exhibiting companies are expected with thousands of professionals from 49
countries to network, exchange ideas, explore new opportunities and strengthen their business partnerships.

Addressing the impact of composites in Mobility 4.0

During the press conference held in Seoul on July 9th to introduce JEC Asia 2019 and eMove Asia 360° main features, a roundtable gathering speakers, experts and academics from prestigious Korean research centers specialized in carbon and composites — along with Hyundai Motor and KCTech composites experts, eMove360°’s CEO & Publisher and Korean Electric Vehicle Association representatives — exchanged their views on the impact of composites in today's and tomorrow's mobility in the world with a focus on the Korean market. Discussions centered around the challenges raised by Mobility 4.0 (electric connected and autonomous vehicles) and how composites can offer highly adapted solutions for the new challenges faced by this sector, particularly in the context of the rising electrification of vehicles.

Hence, the 2019 edition of JEC Asia will welcome for the first time the eMove360° ASIA exhibition and conferences focusing on Trends in electric & autonomous mobility, Battery & Powertrain and Charging & Energy.

Celebrating Innovation and Knowledge

JEC Asia 2019 will also host the 2nd leg of the JEC Startup Booster competition, the leading startup competition in the world of composites will enable companies to find and assess innovations with a potential impact on their respective industry. The 10 finalists selected in the region by a prestigious jury, will pitch their project to win a chance to showcase their work at JEC World 2020 in Paris. The JEC Innovation Awards is a long-established and worldwide program with 3 simple goals: identify, promote and reward the most innovative composite solutions in the world. Over the past 15 years, the JEC Innovation Program has involved 1,800 companies worldwide; 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations. The award ceremony will take place on the second day of JEC Asia, on November 14th, 2019.

JEC Asia 2019 will also feature a fulfilling conference program with experts from the industry giving their insights on the latest developments in high-performance composite technologies and applications.

JEC Asia 2019 conferences main themes will focus on:

• International Carbon Festival Conference organized with our partner, KCTech.
• Automotive composite golden triangle: low CAPEX, low cost but high volume
• Automotive hybrid solutions: take the best of each material
• Aeronautics: faster processes and new materials
• Business opportunities (Raw materials, Process, Application, Countries, Region)
Finally, JEC Asia offers the opportunity to visit Composites sites. This year professionals will live a full experience of South Korea composites Industry visiting: Hanyang University, Kookmin University with Hankuk Carbon, Win & Win Co or Korean Carbon with KCTech in Jeonju.

See you @JEC Asia 2019 and eMove360° Asia, November 13 to 15,  Seoul Coex Convention and Exhibition Center

At next month’s Techtextil 2019 in Frankfurt, Germany, A. Monforts Textilmaschinen GmbH & Co. KG will be highlighting all of the innovative features that have made the Montex stenter the undisputed leader in the field of technical fabric finishing.

“Techtextil is a very important show for us, because technical textiles are a key pillar of our production programme and many of our existing customers will be exhibiting or attending, as well as those we have yet to meet,” says Jürgen Hanel, Head of Technical Textiles at Monforts. “The show provides us with an opportunity to explain the diverse end-products that can be successfully finished on our stenters, as well as with our coating units.”

A number of successful recent Monforts Montex stenter installations in Europe, for example, are dedicated to the production of wide-width digital printing substrates, to high volume automotive fabrics and to heavy duty filter media, to name just three advanced technical materials.

Digital print
Three Montex stenters have just been installed at the plant of a leading finisher of substrates for digital printing substrates in Germany – two of them in extra-wide widths of 5.4 metres – for drying after both washing and coating processes.

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded in recent years by the rapid growth in digitally-printed banners and hoardings – often referred to as ‘soft signage’.

“The substrates of choice for digital printing are 100% polyester warp knits which have extremely smooth surfaces,” says Hanel. “This is becoming increasingly critical due to the general move away from PVC coatings which were the standard in the past. Quality inspection and control systems analyse every square metre of fabric to ensure completely uniform and blemish-free production.”

The fabrics produced are resilient and allow excellent take-up of inks for vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for soft signage installers.
These fabrics are being supplied fully finished, in weights of between 50-350gsm and in rolls of up to 600kg or 1,800 metres.