From the Sector

Reset
55 results
28.03.2023

LOI between Renewcell and Chinese Lyocell Fiber Producer CTA Green Fibre

The Swedish textile-to-textile recycling innovator Renewcell has signed a Letter of Intent with China Textile Academy Green Fibre Co. Ltd., an Chinese lyocell fiber producer, concerning a long-term commercial collaboration around man-made cellulosic fiber production.

The LOI provides the framework for an upcoming offtake agreement between the parties. The future legally binding offtake agreement will set out commercial terms for the delivery of 18,000 tonnes of Circulose® dissolving pulp to CTA Green Fibre over five years. CTA Green Fibre intends to use Circulose® as feedstock in the production of lyocell fibers to be supplied to textile manufacturers and fashion brands worldwide.

The agreement affirms the two companies’ intent to work together to supply lyocell textile fibers made using Circulose®, the 100% recycled textile pulp made by Renewcell, to global fashion brands in the coming years. The agreement has been facilitated by Ekman Group, Renewcell’s exclusive global trading partner.

The Swedish textile-to-textile recycling innovator Renewcell has signed a Letter of Intent with China Textile Academy Green Fibre Co. Ltd., an Chinese lyocell fiber producer, concerning a long-term commercial collaboration around man-made cellulosic fiber production.

The LOI provides the framework for an upcoming offtake agreement between the parties. The future legally binding offtake agreement will set out commercial terms for the delivery of 18,000 tonnes of Circulose® dissolving pulp to CTA Green Fibre over five years. CTA Green Fibre intends to use Circulose® as feedstock in the production of lyocell fibers to be supplied to textile manufacturers and fashion brands worldwide.

The agreement affirms the two companies’ intent to work together to supply lyocell textile fibers made using Circulose®, the 100% recycled textile pulp made by Renewcell, to global fashion brands in the coming years. The agreement has been facilitated by Ekman Group, Renewcell’s exclusive global trading partner.

Patrik Lundström, Renewcell’s CEO, commented: ”With this agreement, we take a new step in demonstrating the applicability of Circulose® in commercial-scale production of lyocell fibers. Lyocell is a high quality, low-impact fiber using closed loop production process which is highly sought after among our fashion brand partners that will now soon be available incorporating Circulose® recycled from textile waste. I am impressed by the innovative capacity and leadership of CTA Green Fibre and look forward to working together with them to make fashion circular together.”

Source:

Re:NewCell AB

15.03.2023

World of Wipes® (WOW) Program Announced

INDA announced the program for the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. Key topics include: Plastics policy: closing the “intention-action” gap, sustainable manufacturing practices, what consumers think about sustainability and how they are driving cultural change, supply chain transparency, wipes advancements, flushability developments, and a special CEO panel sharing their organizations’ approach to inflation, supply chain challenges, and capacity/demand balance.

Among the leading organizations presenting at this year’s event are: Berry Global, Birla Cellulose, Bringabouts, Bureau Veritas, Diamond Wipes, Freudenberg Performance Materials, Glatfelter, Goodwipes, Kimberly-Clark Corporation, National Cotton Council, Mango Consulting, Plastics Industry Association, Rockline Industries, Sharon Laboratories, and Trützschler Nonwovens. Program and speaker details are available on the WOW website.

INDA announced the program for the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. Key topics include: Plastics policy: closing the “intention-action” gap, sustainable manufacturing practices, what consumers think about sustainability and how they are driving cultural change, supply chain transparency, wipes advancements, flushability developments, and a special CEO panel sharing their organizations’ approach to inflation, supply chain challenges, and capacity/demand balance.

Among the leading organizations presenting at this year’s event are: Berry Global, Birla Cellulose, Bringabouts, Bureau Veritas, Diamond Wipes, Freudenberg Performance Materials, Glatfelter, Goodwipes, Kimberly-Clark Corporation, National Cotton Council, Mango Consulting, Plastics Industry Association, Rockline Industries, Sharon Laboratories, and Trützschler Nonwovens. Program and speaker details are available on the WOW website.

Two new features at WOW this year are Lightning Talks and Lunch Around. Lightning Talks are an opportunity for tabletop exhibitors to highlight their innovations in “supersized elevator speeches” to WOW participants. Lightning Talks will take place before the tabletop exhibits open Tuesday and Wednesday evenings. The Lunch Around opportunity connects participants and thought leaders from the wipes industry at select downtown Atlanta restaurants on Tuesday and Wednesday. Space is limited and is first-come, first-served.

WOW kicks off with the WIPES Academy, a comprehensive course including elements of market research, materials, chemistry, converting, and regulatory filing. This course has been redeveloped to include all aspects of wipes development from concept to commercialization. The WIPES Academy is led by Heidi Beatty, Chief Executive Officer, and Paul Davies, Ph.D., Consultant, Crown Abbey LLC. Ms. Beatty and Mr. Davies bring decades of practical experience to give participants real-world solutions for product development challenges and tools to improve processes.

(c) Hypetex
15.03.2023

Michael Dowse joins Hypetex Board

UK advanced materials and technology firm Hypetex, a manufacturer of coloured carbon fibre, has appointed Michael Dowse as a Non-Executive Director and Board Member.

Dowse brings experiences across sport and retail, following leadership roles at some of the biggest sports organisations and companies in the world. He was a Global Director for Nike before becoming President and General Manager Outdoor Americas for Amer Sports, managing brands such as Salomon, Arc’Teryx and Suunto.

As President of Wilson Sporting Goods (2013-2019), Dowse led 1,500+ colleagues in delivering the company’s global strategy, corporate operations, and manufacturing across more than 160 countries. He then took up the position of Chief Executive Officer and Executive Director of the United States Tennis Association (2020-2022).

Dowse will join a group of advisors at Hypetex, which includes Board Chairman Neil MacDougall and former Diageo Chief Financial Officer Nick Rose. They will support CEO Marc Cohen and Chief Technology Officer Nigel Dunlea as they continue to expand the company’s presence in sport and other sectors worldwide.

UK advanced materials and technology firm Hypetex, a manufacturer of coloured carbon fibre, has appointed Michael Dowse as a Non-Executive Director and Board Member.

Dowse brings experiences across sport and retail, following leadership roles at some of the biggest sports organisations and companies in the world. He was a Global Director for Nike before becoming President and General Manager Outdoor Americas for Amer Sports, managing brands such as Salomon, Arc’Teryx and Suunto.

As President of Wilson Sporting Goods (2013-2019), Dowse led 1,500+ colleagues in delivering the company’s global strategy, corporate operations, and manufacturing across more than 160 countries. He then took up the position of Chief Executive Officer and Executive Director of the United States Tennis Association (2020-2022).

Dowse will join a group of advisors at Hypetex, which includes Board Chairman Neil MacDougall and former Diageo Chief Financial Officer Nick Rose. They will support CEO Marc Cohen and Chief Technology Officer Nigel Dunlea as they continue to expand the company’s presence in sport and other sectors worldwide.

Source:

Hypetex

02.03.2023

Recycling Atelier Augsburg and Kelheim Fibres cooperate

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

As a model factory, the Recycling Atelier Augsburg combines the most important processes of textile recycling and offers holistic and comprehensive research along the value chain," explains Georg Stegschuster, head of the Recycling Atelier Augsburg. The scientists research on all process steps of textile recycling: from material analysis to sorting, preparation and textile processing to sustainable product design. Comprehensive data collection and the use of artificial intelligence as well as innovative materials play a central role.

Kelheim Fibres is a producer of high-quality viscose fibres, which consist of cellulose, the main component of the renewable raw material wood, and are used worldwide for products in areas such as hygiene, textiles, and technical applications.

"In New Business Development as well as Fibre and Application Development, we follow the Open Innovation concept - the cooperation with the Recycling Atelier offers us an ideal platform for this. Here we work with partners to advance sustainability and performance," explains Maik Thiel, project manager at Kelheim Fibres.

Recycled cotton fibres are often very short or of uneven length, which makes further processing of 100 % recycled material a challenge. Adding speciality fibres from Kelheim Fibres should enable the production of high-quality new products, such as nonwovens. In the future, the fibres provided by Kelheim Fibres will also be made from recycled pulp.

Source:

Kelheim Fibres GmbH

23.02.2023

Organic Cotton & Textiles Conference in India

The Organic Cotton & Textiles Conference, taking place in Indore, India over three days, from February 27-March 1st is set to bring together a diverse group of key players from every part of the textile supply chain. Farmers, farm groups, industry representatives, non-profits, academics, suppliers, brands, certifiers, government representatives and policymakers will join nearly 200 guests at the multi-day event. The aim is to foster collaboration, explore innovative ideas, listen to those on the ground and focus discussions to develop a shared vision to boost the organic textile supply chain worldwide.

The Organic Cotton & Textiles Conference, taking place in Indore, India over three days, from February 27-March 1st is set to bring together a diverse group of key players from every part of the textile supply chain. Farmers, farm groups, industry representatives, non-profits, academics, suppliers, brands, certifiers, government representatives and policymakers will join nearly 200 guests at the multi-day event. The aim is to foster collaboration, explore innovative ideas, listen to those on the ground and focus discussions to develop a shared vision to boost the organic textile supply chain worldwide.

Co-hosted by  OCA, GOTS, and IFOAM - Organics International, the conference will address a range of subjects including social conditions, transparency through innovation, scaling up organic through investment, as well as sessions tackling certification, decent work and environmental impacts. The event also gives voice to farmers, who join as panellists, in a dedicated Q&A session with seven organic cotton farmers from the region. On the third day, organised by OCA, the organic farmers will welcome attendees to their communities during field trips west to Petlawad to witness organic practices at ground level.

“By addressing these important issues and fostering a dialogue between participants, the conference aims to develop innovative solutions that can drive progress and growth in the sector", says Bart Vollaard, Executive Director of OCA. "We are thrilled to be joining forces with GOTS and IFOAM to create positive change in the organic textile sector."

“Together with IFOAM - Organics International and OCA, GOTS wants to increase visibility of organic and at the same time enhance integrity of organic fibres and textiles. This conference shall serve to strengthen the sector by addressing obstacles and work on effective solutions, in consultation with all relevant and committed stakeholders”, notes Claudia Kersten, Managing Director of GOTS.

Sarah Compson of the IFOAM - Organics International World Board adds “Organic agriculture directly addresses some of the most pressing challenges of our time. IFOAM - Organics International is delighted to collaborate with OCA and GOTS to bring together people from across the whole textile sector and address the barriers and opportunities for scaling organic cotton production worldwide.”

With a strong line-up of notable speakers and guests in a supportive and engaging atmosphere, and a unique approach that connects participants from every step of the supply chain, the Organic Cotton & Textiles Conference is set to be a valuable and transformative event for key stakeholders involved in the organic textile industry.

 

More information:
GOTS OCA IFOAM Conference cotton
Source:

GOTS

17.01.2023

EU agreement on deforestation-free supply chains

The viscose fibre manufacturer Kelheim Fibres - exclusively using FSC® or PEFCTM certified pulps exclusively from sustainably managed sources - welcomes the preliminary political agreement reached between the European Parliament and the Council on an EU regulation on deforestation-free supply chains. The new rules, adopted at the end of 2022, are intended to prevent goods that cause forest degradation or deforestation from being placed on the EU market.

As one of the largest economies worldwide, the EU is a major consumer of wood-based raw materials. Therefore, the new law can significantly contribute to reducing global deforestation and forest degradation as well as protecting threatened forest areas.

The viscose fibre manufacturer Kelheim Fibres - exclusively using FSC® or PEFCTM certified pulps exclusively from sustainably managed sources - welcomes the preliminary political agreement reached between the European Parliament and the Council on an EU regulation on deforestation-free supply chains. The new rules, adopted at the end of 2022, are intended to prevent goods that cause forest degradation or deforestation from being placed on the EU market.

As one of the largest economies worldwide, the EU is a major consumer of wood-based raw materials. Therefore, the new law can significantly contribute to reducing global deforestation and forest degradation as well as protecting threatened forest areas.

“Wood is an incredibly versatile and valuable renewable resource and the basis for countless products. Our viscose fibres are just one example – they offer an environmentally friendly alternative to synthetic materials in various applications and are thus a promising material for the future. Of course, this only applies if the production of our raw materials does not take place at the expense of our earth's natural forest resources. These forests are a bastion of biodiversity and climate protection for our entire planet and must be protected at all costs. No one can escape this responsibility," says Craig Barker, CEO at Kelheim Fibres.

Source:

Kelheim Fibres GmbH

12.12.2022

CELC becomes Alliance for European Flax-Linen & Hemp

  • The European Confederation for Flax and Hemp (CELC) has unveiled its new visual identity and name: Alliance for European Flax-Linen & Hemp.
  • The European Flax-Linen and Hemp industries have announced they are organizing their development around a strengthened team with a clear mission: to expand the entire industry whilst making European Flax-Linen and Hemp the preferred sustainable premium fibers worldwide.
  • The Alliance for European Flax-Linen & Hemp will launch its new identity in the first semester of 2023 for all target groups including Natural Fiber Composite Applications.

CELC has announced its new name and visual identity. The organization, which is the only European agro-industrial organization that serves as a global reference, will now be known as the Alliance for European Flax-Linen & Hemp.

  • The European Confederation for Flax and Hemp (CELC) has unveiled its new visual identity and name: Alliance for European Flax-Linen & Hemp.
  • The European Flax-Linen and Hemp industries have announced they are organizing their development around a strengthened team with a clear mission: to expand the entire industry whilst making European Flax-Linen and Hemp the preferred sustainable premium fibers worldwide.
  • The Alliance for European Flax-Linen & Hemp will launch its new identity in the first semester of 2023 for all target groups including Natural Fiber Composite Applications.

CELC has announced its new name and visual identity. The organization, which is the only European agro-industrial organization that serves as a global reference, will now be known as the Alliance for European Flax-Linen & Hemp.

The new name - Alliance for European Flax-Linen & Hemp – reflects a newly restructured European industry which brings together the entire value chain around a common goal: to make European Flax-Linen and Hemp the preferred sustainable premium fibers worldwide for Fashion, Technical Textiles and Natural Fiber Composite Applications.

The new brand identity is accompanied by a new logo that connects the identity, values and strategic direction of the Alliance for European Flax-Linen & Hemp. In addition to visual changes, the Alliance has announced enhanced values and a clear strategic path to turn European Flax-Linen and Hemp into the preferred sustainable premium fibers worldwide.

The Alliance’s future development pathway will focus on three distinct strategic pillars.

  • Enhancing its work in publishing structured, reliable economic data and information on a regular basis, in order to be able to continuously deploy a set of specific decision-making support tools.
  • Transforming the Alliance for European Flax-Linen & Hemp into an innovative and sustainable international reference which continuously improves its environmental footprint through two essential elements: traceability and Life Cycle Analysis.
  • Guaranteeing quality and better describing the quality of its fibers by using technological innovations to create a reference for describing long fibers. A description of European Flax® fibers through optical imaging will soon complement the organoleptic method.

“Europe is the top global producer of Flax fiber. In an international context of growth and reindustrialization, Flax, which accounts for just 0.4% of global textile fibers, is a globalized fiber with remarkable technical and environmental properties. At the same time, the European textile Hemp industry is organizing itself to boost growth. Today, the European Flax-Linen and Hemp ecosystem thus embodies an innovative and sustainable European textile dynamic that meets the needs of consumers and brands.” Bart Depourcq, President, Alliance for European Flax-Linen & Hemp.

Source:

Alliance for European Flax-Linen & Hemp

Texaid / Texcircle
26.10.2022

Swiss Textile Recycling Project TEXCIRLCE

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

Together with the design research expertise of the Lucerne University of Applied sciences and arts, the spinning expertise of Rieter and the sorting and collection expertise of Texaid, systems should be created where products of high quality can be produced of recycled fiber. On board were the expertise of further Cluster partners of Brands, Retailers, and the public sector to see how a joint Cluster and system coukld be established.

The Project Texcircle and cluster is led by the Lucerne University of Applied Sciences and Arts – Art  & Design, and in collaboration with Coop, Rieter, Jacob Rohner AG, Ruckstuhl AG, TEXAID as well as workfashion.com ag. Furthermore, Bundesamt für Zivildienst ZIVI, NIKIN AG, and Tiger Liz Textiles are supporting the project. The project is funded by Innosuisse.

Furthermore, collaboration partners from all over Europe contributed to the project to enable these prototypes and systems.

Through joint developments from the design, the collecting, sorting trials, tearing, and spinning trials until the actual production trials and product testing. The partners were able to recycle 2.5 Tons of pre-and post-consumer textile waste into product prototypes with a promising commercial interest. From socks, west, and pullovers to non-woven felts and accessories to carpets and curtains. Through our 2 years of collaboration, the teamcame across several hurdles in the textile recycling value chain which could be tackled. This was a proof of concept that a circular system is possible and the industry now has to enable this at full scale.

Source:

Texaid / Texcircle

27.09.2022

Lenzing awarded by EcoVadis for sustainability

  • Lenzing has been awarded the highest CSR rating from EcoVadis for the second consecutive time
  • Global rating standard evaluates 90,000 companies: Lenzing among top 1 percent of its industry
  • enzing joins the UN Global Compact sustainability initiative

Lenzing Group has been awarded platinum status in the CSR rating from EcoVadis. This comprehensive assessment covers the four key practices of corporate social responsibility: the environment, fair working conditions and human rights, ethics and sustainable procurement.

This is the second time that EcoVadis, a leading international provider of sustainability ratings for businesses, has awarded platinum status to Lenzing for its sustainability performance. As a result, Lenzing ranks among the world’s top 1 percent of companies in its sector that are rated by EcoVadis.

  • Lenzing has been awarded the highest CSR rating from EcoVadis for the second consecutive time
  • Global rating standard evaluates 90,000 companies: Lenzing among top 1 percent of its industry
  • enzing joins the UN Global Compact sustainability initiative

Lenzing Group has been awarded platinum status in the CSR rating from EcoVadis. This comprehensive assessment covers the four key practices of corporate social responsibility: the environment, fair working conditions and human rights, ethics and sustainable procurement.

This is the second time that EcoVadis, a leading international provider of sustainability ratings for businesses, has awarded platinum status to Lenzing for its sustainability performance. As a result, Lenzing ranks among the world’s top 1 percent of companies in its sector that are rated by EcoVadis.

In line with its “Naturally positive” sustainability strategy, the Lenzing Group has set ambitious targets in each of its core strategic areas, aimed at bolstering its capacity to move from a linear to a circular model. Lenzing reports the corresponding implementation measures and the progress it has made in its annual sustainability report. This high level of accountability and transparency was particularly praised in the assessment by EcoVadis. The rating provider also highlighted Lenzing’s comprehensive measures to reduce air pollution, wastewater and greenhouse gases, in addition to its provision of skills development training and health care programs for staff members.

Partnerships for systemic change
Lenzing forges strategic partnerships with various stakeholders to meet its ambitious climate and sustainability targets and drive forward systemic change in the textile and nonwoven industries. This is why Lenzing, as one of 15,000 companies worldwide, joined the United Nations Global Compact. As a member, Lenzing is committed to upholding human rights, respecting the rights of employees and their representatives, protecting the environment, enabling fair competition and combating corruption.

Source:

Lenzing AG

(c) adidas
23.09.2022

adidas by Stella McCartney: Industry-First, with Viscose Sportswear

The garment is part of the New Cotton Project, an EU Consortium of key players united to demonstrate the potential of circular garment production
adidas by Stella McCartney presented a first of its kind sportswear garment designed to demonstrate the potential of a circular fashion ecosystem. Joining forces with leading names and innovators in the fashion industry to create, test, and innovate, the tracksuit forms the pinnacle expression of the brand’s pilot circularity program, Made to Be Remade. A take-back scheme where consumers can wear it down and then return it by scanning a QR code via the product so it can be remade. Moving adidas closer to its goal to help end plastic waste.

The garment is part of the New Cotton Project, an EU Consortium of key players united to demonstrate the potential of circular garment production
adidas by Stella McCartney presented a first of its kind sportswear garment designed to demonstrate the potential of a circular fashion ecosystem. Joining forces with leading names and innovators in the fashion industry to create, test, and innovate, the tracksuit forms the pinnacle expression of the brand’s pilot circularity program, Made to Be Remade. A take-back scheme where consumers can wear it down and then return it by scanning a QR code via the product so it can be remade. Moving adidas closer to its goal to help end plastic waste.

It’s currently estimated that just under 1% of all textiles worldwide are recycled into new textiles, so it’s vital the textile industry comes together to learn and knowledge-share. Scheduled across a three-year period, the consortium which includes partners such as Frankenhuis have collected and sorted post-consumer end-of-life textiles, which using pioneering Infinited Fiber technology have been regenerated into a new man-made cellulosic fiber called Infinna™ - which looks and feels just like virgin cotton. This is then turned into a yarn blended with organic cotton, for garment production.

Designing the tracksuit, made using viscose (60% viscose, 40% organic cotton) as a consortium member took the process from a linear to a circular model , as the apparel’s function and style were of equal focus to the garment’s end of life existence.

At the end of the project, consortium partner Aalto University, a Finnish multidisciplinary community specialising in science, art, technology , and design, will distribute learnings with the industry and bring this potential circular design solution to the ever-eco-conscious consumer.

Source:

adidas

09.09.2022

Lenzing invests in renewable energy expansion

  • Partnership with green power producer Enery and Energie Steiermark realizes construction of a photovoltaic plant with 5.5 MWpeak capacity
  • Strategic investments in renewables boost energy independence and reduce carbon footprint

The Lenzing Group has signed an electricity supply contract with green power producer Enery and Energie Steiermark to finance a photovoltaic plant in the Deutschlandsberg region (Styria). The electricity generated will supply the fiber and pulp plant at the Lenzing site after commissioning from the fourth quarter of 2023. The electricity supply contract is limited to 20 years.

The plant’s output will amount to 5.5 MWpeak. This corresponds to the average annual electricity demand of more than 1,700 households. Several photovoltaic systems are already being installed at the Lenzing site, including the largest ground-mounted plant in the province of Upper Austria, whose commissioning is imminent.

  • Partnership with green power producer Enery and Energie Steiermark realizes construction of a photovoltaic plant with 5.5 MWpeak capacity
  • Strategic investments in renewables boost energy independence and reduce carbon footprint

The Lenzing Group has signed an electricity supply contract with green power producer Enery and Energie Steiermark to finance a photovoltaic plant in the Deutschlandsberg region (Styria). The electricity generated will supply the fiber and pulp plant at the Lenzing site after commissioning from the fourth quarter of 2023. The electricity supply contract is limited to 20 years.

The plant’s output will amount to 5.5 MWpeak. This corresponds to the average annual electricity demand of more than 1,700 households. Several photovoltaic systems are already being installed at the Lenzing site, including the largest ground-mounted plant in the province of Upper Austria, whose commissioning is imminent.

In 2019, Lenzing became the first fiber manufacturer to set a target to reduce its carbon emissions by 50 percent by 2030 and to be climate neutral by 2050. This carbon reduction target has been confirmed by the Science Based Targets Initiative. Lenzing is also currently investing in reducing carbon emissions at other sites worldwide. Only recently, the Lenzing Group announced that its Indonesian site will also be relying on green energy in the future.

Source:

Lenzing AG

Photo: FET
02.08.2022

FET at Techtextil 2022: Principle theme was Sustainability

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

Fibre Extrusion Technology Limited (FET) of Leeds, England enjoyed another successful Techtextil in Frankfurt, with high quality enquiries from technical companies and organisations worldwide, but in particular from customers based in Europe.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET

28.07.2022

Lenzing partners with Red Points to fight counterfeits

  • Collaboration with Red Points addresses consumers’ increasing expectations on transparency and highlights Lenzing’s commitment to trademark protection
  • Protects interest of Lenzing customer and partners who are making real efforts to enhance the transparency of their value chains
  • Builds upon Lenzing’s overall brand protection efforts that verify the authenticity of fibers up to the end products

Lenzing Group, a global producer of wood-based specialty fibers, has announced a partnership with Red Points, a company in online IP infringement detection and removal, to strengthen Lenzing’s existing brand protection efforts globally and enable round-the-clock brand monitoring services. As Lenzing’s textile brands TENCEL™, LENZING™, ECOVERO™, as well as nonwovens brand VEOCEL™ continue to generate widespread demand from industry partners and customers worldwide, it is becoming increasingly important to protect the company’s trademarks and provide full visibility into the brands’ presence online.

  • Collaboration with Red Points addresses consumers’ increasing expectations on transparency and highlights Lenzing’s commitment to trademark protection
  • Protects interest of Lenzing customer and partners who are making real efforts to enhance the transparency of their value chains
  • Builds upon Lenzing’s overall brand protection efforts that verify the authenticity of fibers up to the end products

Lenzing Group, a global producer of wood-based specialty fibers, has announced a partnership with Red Points, a company in online IP infringement detection and removal, to strengthen Lenzing’s existing brand protection efforts globally and enable round-the-clock brand monitoring services. As Lenzing’s textile brands TENCEL™, LENZING™, ECOVERO™, as well as nonwovens brand VEOCEL™ continue to generate widespread demand from industry partners and customers worldwide, it is becoming increasingly important to protect the company’s trademarks and provide full visibility into the brands’ presence online.

Protecting the interest of Lenzing’s partners and consumers
Red Points provides the ideal technology solution to help Lenzing monitor and remove unauthorized use of its trademarks and counterfeits online. The technology works by using Artificial Intelligence (AI) to automatically detect intellectual property infringements of Lenzing’ trademarks with high accuracy and efficiency.

Brand protection is just one of Lenzing’s ongoing proactive measures aimed at enhancing transparency in the supply chain and protecting the interest of Lenzing’s partners by ensuring they are purchasing genuine Lenzing fibers which meet their high standards.

In 2018, Lenzing launched the Lenzing E-Branding Service which allows Lenzing’s customers, retailers and brand partners to effectively use trademarks in their marketing materials. The platform has been welcomed by partners globally as it continues to deliver value to the fashion, textile and nonwoven sectors by facilitating the traceability of Lenzing’s fibers and enabling customers to promote them effectively.

Source:

Lenzing AG

(c) Autoneum Management AG
27.06.2022

Autoneum: Sound-insulating technologies for electric drives

Catering to the acoustic requirements of electric vehicles, Autoneum has extended its concepts for noise-reducing engine encapsulations to new applications related to electric drives. Hybrid-Acoustics PET and the foam-based alternatives Hybrid-Acoustics FLEX and Fit FLEX ensure optimum noise protection in e-cars and thus improve driving comfort. All three technologies are characterized by a high acoustic performance tailored to specific customer needs and zero waste production.

Disturbing noises such as the high-frequency sounds of e-motors and other electric devices or the whining noise of the gearbox are posing new acoustic challenges for vehicle manufacturers worldwide. Anticipating the increasing demand for sound-reducing components in both the front and the rear of e-cars early on, Autoneum has expanded its technologies for noise protection in the engine bay to new tailor-made applications for electric vehicles.

Catering to the acoustic requirements of electric vehicles, Autoneum has extended its concepts for noise-reducing engine encapsulations to new applications related to electric drives. Hybrid-Acoustics PET and the foam-based alternatives Hybrid-Acoustics FLEX and Fit FLEX ensure optimum noise protection in e-cars and thus improve driving comfort. All three technologies are characterized by a high acoustic performance tailored to specific customer needs and zero waste production.

Disturbing noises such as the high-frequency sounds of e-motors and other electric devices or the whining noise of the gearbox are posing new acoustic challenges for vehicle manufacturers worldwide. Anticipating the increasing demand for sound-reducing components in both the front and the rear of e-cars early on, Autoneum has expanded its technologies for noise protection in the engine bay to new tailor-made applications for electric vehicles.

With the fibrous technology Hybrid-Acoustics PET and the two foam alternatives Hybrid-Acoustics FLEX and Fit FLEX, the Company offers three standardized technologies that reduce noise directly at the source, thereby improving driver comfort. All three technologies are produced waste-free and their adaptive capacity to different sizes and shapes allows for a broad spectrum of uses in electric vehicles: from e-motor encapsulations to the reduction of noise and vibration of inverters, gearbox, pumps and compressors. By offering both fibrous and foam-based variants, Autoneum is able to flexibly cater to individual customer needs and preferences with regard to material, acoustic concept, sustainability and costs.

In terms of sustainable noise protection in the engine bay, Autoneum’s patented innovation Hybrid-
Acoustics PET sets the tone: it is made of 100 percent PET with up to 50 percent recycled fibers; cut-offs in production are reclaimed, processed and reused and the material can be fully recycled at the end of product life. The unique textile technology, which is part of the Company’s sustainability label Autoneum Pure, is particularly suited to attenuating high-frequency sounds of the electric drive unit and offers the optimum balance of absorption and insulation. Moreover, components made of Hybrid-Acoustics PET are up to 40 percent lighter compared to standard insulators.

To accommodate the differing preferences of vehicle manufacturers, Autoneum has complemented its lightweight textile technology with two foam-based alternatives. Since the foam is injected in both technologies, no waste is generated during production either. Hybrid-Acoustics FLEX is based on the same acoustic concept as Hybrid-Acoustics PET, but the decoupler is made of foam instead of felt. Autoneum’s Fit FLEX, on the other hand, combines the foam decoupler with an injection molded heavy layer. Thanks to the high geometrical adaptability of foam to even complex shapes, both technologies offer outstanding acoustic performance in the insulation of e-motors and other noise sources in electric vehicles. Furthermore, the absorbing or insulating acoustic quality of the foam can be flexibly tuned to specific customer needs.

Source:

Autoneum Management AG

Graphic DNFI
19.06.2022

DNFI Innovation in Natural Fibres Award Ceremony During Heimtextil

Natural fibers are among the most important raw materials in the textile and fashion industry worldwide. For centuries, they have fed millions of people through their cultivation or breeding, and it is impossible to imagine daily life without them. Especially at the moment, natural fibers are gaining special importance due to the intense discussions about sustainable living. Even though natural fibers have accompanied mankind for a long time, they are changeable, technical, and adaptable to the challenges of the textile industry.

The Discover Natural Fibres Initiative (DNFI) is celebrating natural fibres in a program to be conducted during Heimtextil in Frankfurt on 23 June. Anyone with an interest in the role of natural fibres in the world economy, economic indicators of textile activity, innovations in natural fibre research, and updates on proposed EU legislation affecting textiles is welcome to attend.

The program will include various presentations by the previous and current award winners, presentations, and discussions:

Overview of world natural fibre production, employment, and value,

Natural fibers are among the most important raw materials in the textile and fashion industry worldwide. For centuries, they have fed millions of people through their cultivation or breeding, and it is impossible to imagine daily life without them. Especially at the moment, natural fibers are gaining special importance due to the intense discussions about sustainable living. Even though natural fibers have accompanied mankind for a long time, they are changeable, technical, and adaptable to the challenges of the textile industry.

The Discover Natural Fibres Initiative (DNFI) is celebrating natural fibres in a program to be conducted during Heimtextil in Frankfurt on 23 June. Anyone with an interest in the role of natural fibres in the world economy, economic indicators of textile activity, innovations in natural fibre research, and updates on proposed EU legislation affecting textiles is welcome to attend.

The program will include various presentations by the previous and current award winners, presentations, and discussions:

Overview of world natural fibre production, employment, and value,

  • Economic indicators and impacts of coronavirus on textile industries,
  • Updates on innovative uses of natural fibres:
  • Use of wool in automobile insulation applications for enhanced sustainability,
  • Using cellulose from cotton to produce a biodegradable plastic substitute,
  • Manufacturing waterproof fabric from a blend of cotton and jute as sustainable
  • Substitute for polypropylene tarps
  • Proposed EU textile legislation and potential impacts on natural fibres
More information:
DNFI DNFI award Heimtextil
Source:

DNFI

(c) COBRA International Co.,Ltd
24.05.2022

New Report by COBRA details Innovations in Windsurfing

Cobra International has launched an innovation report highlighting its key composite manufacturing innovations that have reshaped the Windsurfing industry.
Having first begun building windsurf boards in 1978, Cobra continues to drive technology development in the sport and 44 years later, manufactures approximately 80% of the world’s composite windsurf boards. Manufacturing for leading brands such as Fanatic, Starboard, Naish, RRD, JP and Quatro Goya, Cobra has consistently evolved and improved the construction and finishes of the boards that it builds, balancing stiffness, comfort, weight, strength, durability, and aesthetics.
Cobra’s report details key manufacturing innovations including:

Cobra International has launched an innovation report highlighting its key composite manufacturing innovations that have reshaped the Windsurfing industry.
Having first begun building windsurf boards in 1978, Cobra continues to drive technology development in the sport and 44 years later, manufactures approximately 80% of the world’s composite windsurf boards. Manufacturing for leading brands such as Fanatic, Starboard, Naish, RRD, JP and Quatro Goya, Cobra has consistently evolved and improved the construction and finishes of the boards that it builds, balancing stiffness, comfort, weight, strength, durability, and aesthetics.
Cobra’s report details key manufacturing innovations including:

  • The introduction of its innovative vacuum moulding technique that Cobra perfected just as the popularity of the sport exploded.
  • The manufacture of its own composite EPS forming moulds producing strong, watertight cores that are ready to use in production directly from the mould.
  • The mass production of sandwich boards with thermoformed PVC foam wrapped around the rails, increasing the board’s strength whilst keeping weight to a minimum.
  • Seamless rail construction
  • High-volume manufacturing capacity optimized for the finest prepreg carbon foils satisfying the current demand for windsurf foiling equipment
  • Development programs with on of the world’s leading carbon fibre fabric producers to create ever lighter biaxial fabrics.

“As we set aside time during the pandemic to upskill, innovate, and look to the future, it was also important that we referred back to our key technology successes. This got us thinking about so many of our developments which led us to create this innovation report. Customers can draw great confidence from the fact that the Cobra team is always working on tomorrow’s next generation product as well as building exceptional quality into each of today’s boards.” Bruce Wylie, CCO, Cobra International

More information:
COBRA carbon fibers biaxial
Source:

COBRA International Co.,Ltd / 100 % Marketing

(c) Cobra International
26.04.2022

COBRA International: Highlights Diversification into New Market Sectors at JEC World 2022

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Sustainability Options for Automotive and Watersports
Sustainability has a been a key focus for the Cobra Waterports division and CAC, the Cobra automotive business unit. At JEC World 2022, Cobra will showcase the increasing material and process options it has developed with both bio-resin and natural fibre reinforcements variants presented alongside more traditional carbon fibre parts.

Visitors will be able to get up close to a new Bio SUP Wingfoil board featuring a basalt, flax, bamboo and GreenPoxy bio-epoxy construction created for partners NSP, as well as state-of-the-art compression moulded prepreg foils. Cobra’s first fully recyclable surfboard incorporating the Recyclamine® resin technology that Cobra was recognised for in the 2020 JEC Innovation Awards will also be on display alongside a new Audi e-tron foil by Aerofoils – the world’s safest electric hydrofoil board.

The CAC team (Automotive Business Unit of Cobra) will present a set of OEM mirror cap parts that showcase a range of carbon SMC, woven visual carbon, pure woven visual flax, hybrid flax-carbon and painted flax construction options for the same component.  Clear carbon aesthetic and structural parts including CAC made M-carbon components for the BMW S 1000 RR Motorcycle will furthermore underline the high quality and eye-for-detail for which CAC is renowned.

Carbon Prosthetics
An entirely new composite application for the company, Cobra will also show two composite prosthetic devices at JEC which were productionised by the in-house design and development team. Working alongside a leading Thai university and a medical device OEM, Cobra created a rapid and cost effective series production process for a lightweight carbon fibre prosthetic foot. In another example of lightweight composites creating major quality of life improvements, Cobra has also designed and manufactured a carbon and glass fibre prepreg foot support for Elysium Industries.

More information:
COBRA Composites UAV
Source:

Cobra International

(c) FET
FET-100 Series Melt Spinning System
13.03.2022

FET gearing up for Techtextil 2022

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

A major theme to be highlighted on the FET stand is Sustainability. The FET range of laboratory and pilot extrusion lines is ideally suited for both process and end product development of sustainable materials.

FET has successfully processed almost 30 different polymer types in multifilament, monofilament and non-woven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET

Photo: Pixabay
10.03.2022

Carbios: White PET fiber from colored textile waste

  • Carbios has succeeded in producing a 100% enzymatically recycled white PET fiber from colored textile waste
  • At the same time, the company has produced the first 100% recycled PET bottles, that have successfully passed the food contact validation tests, from the same textile waste.
  • Carbios received €827,200 for the validation of this final technical stage of the project co-funded by ADEME

Carbios announced the validation of the 3rd and final technical step of the CE-PET research project, co-funded by ADEME3 (France’s Environment and Energy Management Agency), for which Carbios is the lead partner alongside its academic partner TWB. This achievement confirms, once again, the full potential and breadth of Carbios’ enzymatic recycling process, C-ZYME™. This breakthrough innovation makes it possible to produce a wide variety of products of equivalent quality to those of petro-sourced origin from any PET waste, including textiles.
 
The first white PET fiber recycled enzymatically from colored textile waste

  • Carbios has succeeded in producing a 100% enzymatically recycled white PET fiber from colored textile waste
  • At the same time, the company has produced the first 100% recycled PET bottles, that have successfully passed the food contact validation tests, from the same textile waste.
  • Carbios received €827,200 for the validation of this final technical stage of the project co-funded by ADEME

Carbios announced the validation of the 3rd and final technical step of the CE-PET research project, co-funded by ADEME3 (France’s Environment and Energy Management Agency), for which Carbios is the lead partner alongside its academic partner TWB. This achievement confirms, once again, the full potential and breadth of Carbios’ enzymatic recycling process, C-ZYME™. This breakthrough innovation makes it possible to produce a wide variety of products of equivalent quality to those of petro-sourced origin from any PET waste, including textiles.
 
The first white PET fiber recycled enzymatically from colored textile waste
Worldwide, around 90 million tons of PET are produced each year, more than 2/3 of which are used to manufacture fibers. However, only 13% of textile waste is currently recycled, mainly for downcycling, i.e. for lower quality applications (such as padding, insulators or rags). By successfully manufacturing at pilot scale a white PET fiber that is 100% enzymatically recycled from colored textile waste, Carbios is paving the way for the circular economy in the textile industry.  C-ZYME™ is now on the doorstep of industrialization and will soon enable the biggest brands to move closer to their sustainability goals.
 
Emmanuel Ladent, Chief Executive Officer of Carbios: « Thanks to our breakthrough process, it will soon be possible to manufacture, on a large scale, t-shirts or bottles using polyester textile waste as raw material. This is a major breakthrough that gives value to waste that currently has little or no value. It is a concrete solution that opens up a global market of 60 million tons per year of potential raw materials and will help to reduce the use of fossil resources. »
 
Separate collection of textile waste soon to be mandatory in Europe
From 1 January 2025 the separate collection of textile waste, which is already in place in some countries, will be mandatory for all EU Member States (European Directive 2018/851 on waste).  Carbios’ process will enable this waste to be sustainably recovered and included in a true circular economy model.
 
These technological validations were carried out as part of the CE-PET research project, co-funded by ADEME3. In particular, the project aimed to develop Carbios’ enzymatic PET recycling process on textile waste. The C-ZYME™ technology is complementary to thermomechanical recycling and will make it possible to process plastic and textile waste deposits that are currently not or poorly recovered. For the validation of this stage of the project, Carbios received €827,200 (€206,800 in grants and €620,400 in repayable advances).

More information:
Carbios PET textile waste
Source:

Carbios

21.02.2022

JEC COMPOSITES STARTUP BOOSTER 2022

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

Launched in 2017, Startup Booster has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 500+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega…
This challenge not only represents an opportunity to the winners of the trophy but to all the parts involved: participants, jury, official partners and the worldwide audience of JEC World. It brings the entire composites value chain together, creating future business opportunities.

The 20 finalists are divided into two categories:
• Process, Manufacturing & Equipment
• Materials & Products

The jury includes representatives from major manufacturers and investors:
Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite, Airbus
Karl-Heinz FULLER, Head of Future Outside & Materials Mercedes-Benz AG
Florent ILLAT, Head of Safran Corporate Ventures, Safran
Brian KRULL, Global Director of Innovation, Magna Exteriors
Tim VORAGE, Founder and Manager Growth Garage Accelerator , Mitsubishi Chemicals Advanced Materials

Two pitch sessions of 10 presentations each will be held in the Agora stage (Hall 5), on Tuesday, May 3, from 10am to 11.25am (Category: Products & Materials) and from 4.30pm to 5.55pm (Category: Process, Manufacturing & Equipment). Three winners will be chosen by the jury and one winner for the sustainable aspects of the project. The awards ceremony will be held on Wednesday, May, 4th at 2.45 pm.

Category “Products & Materials”
o Blackleaf (France)
o Dongnam Realize (South Korea)
o FibreCoat (Germany)
o FVMat (Israel)
o Ora Graphene Audio (Canada)
o Pangolin Defense (France)
o Phononic Vibes (Italy)
o Revolve (Germany)
o Smart Resilin (Israel)
o Space Walker (Japan)

Category “Process, Manufacturing & Equipment”
o Antefil Composite Tech (Switzerland)
o ANYBRID (Germany)
o Atomic-6 (USA)
o Carbon-Drive (Germany)
o Continuum (Denmark)
o Fibraworks (Germany)
o Herone (Germany)
o RVmagnetics (Slovakia)
o Touch Sensity (France)
o XARION Laser Acoustics (Austria)

More information:
JEC Group Startup
Source:

JEC Group