From the Sector

Color Solutions International, a member of the DyStar® Group, has issued their COLOR ANALYSIS report for Autumn/Winter 2020.

The trend and color experts at CSI are delighted to bring you the sixth issue of the Color Analysis report. New for this season, the experts at Color Solutions International have delved deeper by giving more detail for each color using their proprietary Relative Color Popularity process (RCP). RCP is a marriage of color validation with trend color forecasting. The RCP report has been organized into four categories to help validate your color selection.

In this issue, 54 ColorWall™ colors are featured along with additional color validation, color evolution, and direction by hue. "This season’s Color Analysis for Autumn/Winter 2020 found its inspiration in our heritage and reconnection of our roots. We look from the past to present day reality to shape the themes of trends reflected in the spirit of time we are living in. From a time gone by to this moment of now, themes take shape as they transform historic elements into modern day life, intertwining together to create a new existence full of creative energy and vitality.

Reminiscent of a time gone by, all that we consider heritage to be, has developed into a level of loyalty and trust over time. The quality in make and the care that goes into construction found in the ideas of heritage goods begin to resurface into a lifestyle of quality over quantity. In the present and future looking forward, we also continue to explore innovative lifestyle trends as we are becoming more conscious about the environment and the impact our choices have.

Decline in revenue due to lower prices for standard viscose, less favorable currencies and lower production volume

• Pressure on prices for key raw materials remains high
• Positive impact due to focus on specialty fibers and further optimization of the product mix
• Expansion project in Mobile temporarily mothballed
• Acquisition of the remaining 30 percent of Lenzing (Nanjing) Fibers Co. Ltd.

The Lenzing Group recorded a solid business development in the first three quarters of 2018. The decline in revenue and earnings compared with the same period of the previous year was essentially based on a mix of lower prices for standard viscose, more unfavorable exchange rates and price increases for key raw materials. The Lenzing Group’s strategic orientation with a focus on specialty fibers had a positive impact in this environment.

Revenue decreased by 5.2 percent to EUR 1,636.2 mn over the comparative period of the previous year. Apart from the high starting base, this was primarily attributable to the expected challenging market environment for standard viscose, less favorable exchange rates and lower production volume. EBITDA (earnings before interest, tax, depreciation and amortization) recorded a decline by 26.8 percent to EUR 290.6 mn due to price increases for key raw materials and higher energy and dissolving wood pulp prices. The EBITDA margin dropped from 23 percent in the first three quarters of the previous year to 17.8 percent. EBIT (earnings before interest and tax) fell by 36.2 percent to EUR 190.3 mn, leading to a lower EBIT margin of 11.6 percent (01-09/2017: 17.3 percent). Net profit for the period dropped by 39 percent from EUR 219.3 mn in the previous year to EUR 133.8 mn. Earnings per share equaled EUR 5.06 (01-09/2017: EUR 8.12).

“The Lenzing Group is currently operating in a challenging environment. Against this background, we are satisfied with the solid business development and the corporate strategy sCore TEN has a positive impact. The new production line in Heiligenkreuz started up successfully and customers’ feedback has been positive,” says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “While many viscose producers are faced with a very tense profit situation, we are well positioned due to our specialty strategy and still expect a satisfactory full year”, Doboczky adds.

Key strategic measures were implemented during the first three quarters of 2018 in line with the sCore TEN strategy. The start-up of new capacities for lyocell fibers in Heiligenkreuz, the production start of LENZING™ ECOVERO™ fibers at the Nanjing site and the investment in another pilot line for TENCEL™ Luxe filaments are important steps to accomplish the goal of increasing the share of specialty fibers in total revenue.

Project in Mobile temporarily mothballed
Due to the decision to temporarily mothball the lyocell expansion project in Mobile, Alabama (USA), in view of the buoyant US labor market and trade tensions between the major trading blocks, the implementation of the expansion plan for specialty staple fibers will be slowed down. The Lenzing Group will put all its effort to readjust the execution of its growth plan to meet strong market demand for its lyocell fibers. This includes an increased focus on the lyocell expansion project in Prachinburi (Thailand).

Advancing forward solutions
Regarding the capacity expansion for specialty products such as TENCEL™ Luxe filaments and LENZING™ ECOVERO™ viscose fibers, Lenzing is still on track. After the introduction of TENCEL™ Luxe branded lyocell filament yarns in the previous year, Lenzing continues to drive innovations in the area of the value chain. In September, the company also announced the successful development of the LENZING™ Web Technology, a new technology platform focusing on sustainable nonwoven products, which will lead to new market opportunities for the industry. Following several years of research and development work and investments totaling EUR 26 mn, the pilot plant at the headquarters in Lenzing has been successfully put into operation.

Largest dissolving wood pulp line worldwide
At the end of June, the Lenzing Group and Duratex, the largest producer of industrialized wood panels of the southern hemisphere, announced that they had agreed on the terms and conditions to form a joint venture to investigate building the largest single line dissolving wood pulp plant in the state of Minas Gerais (Brazil). This decision supports the self-supply with dissolving wood pulp and the growth in specialty fibers. The joint venture is investigating the construction of a 450,000 t dissolving wood pulp plant, which is expected to become the largest and most competitive single line dissolving wood pulp plant in the world. The final investment decisionto build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

Acquisition of Chinese operation
At the beginning of November the takeover by the Lenzing Group of the remaining 30 percent of its Chinese subsidiary Lenzing (Nanjing) Fibers Co. Ltd. (LNF) from its state-owned joint venture partner NCFC was completed. After closing of the transaction, the Lenzing Group will hold 100 percent of LNF. The acquisition will have a negative impact on net profit of approx. EUR 21 mn for the fiscal year 2018. The purchase of the shares supports Lenzing’s strategic growth as a producer of specialty fibers from the renewable raw material wood in China and worldwide. It paves the way to setting up further production lines for specialty fibers. Lenzing wants to convert LNF into a specialty fibers hub over time.

Expansion of capacities
CAPEX (investments in intangible assets and property, plant and equipment) rose by 35.5 percent year-on-year to EUR 174.1 mn in the first three quarters of 2018. This is primarily attributable to capacity expansions in Heiligenkreuz and the expansion of the existing dissolving wood pulp plant in Lenzing as well as the investments made so far in Mobile.

Outlook
Demand development on the global fiber market remains positive. Lenzing expects wood-based cellulosic fibers to continue to grow at a higher rate than the overall fiber market. In a challenging market environment the Lenzing Group expects solid results for 2018, albeit lower than in the outstanding last two years.

For 2019, Lenzing expects standard viscose markets to remain under pressure because of an ongoing oversupply and very high raw material prices. Lenzing’s specialty fiber business is expected to continue the very positive development.

The above-mentioned development reassures the Lenzing Group in its chosen corporate strategy sCore TEN. Lenzing is very well positioned in this market environment and will continue its consistent focus on growth with specialty fibers.

At the Composites Europe in Stuttgart /06 - 08 November 2018), the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be showing products, components and machines along the fibre composite process chain. The ITA will present itself at the booth of the Aachen Center for Integrative Lightweight Construction (AZL) in hall 9, booth E70. Various demonstrators will be used to present selected innovative processes and products over the individual steps. The exhibits come from different fields of application: From mobility applications to the construction sector. Here is an example from the field of "construction composites":

With the concrete bar stool with hybrid carbon reinforcement, the ITA demonstrates that textiles as reinforcement structures for concrete elements allow a enormous geometrical freedom of Design. So far, manual positioning of the textile reinforcement used to be time-consuming and complex, as permitted tolerances are in the millimetre range. Thus the production mainly contributed to the high costs of textile concrete.

At the ITA, the two industrial partners Albani Group GmbH & Co. KG and DuraPact 2.0 Kompetenzzentrum Faserbeton GmbH developed a new hybrid reinforcement with integrated spacer. This hybrid reinforcement reduces the time required to position the reinforcement by up to 60 percent and thus makes the material significantly more

The new, cost-effective hybrid reinforcement contains an integrated spacer and thus faciliates the positioning of dry and coated reinforcements. The integrated spacer allows several layers of reinforcement to be stacked quickly, allowing the desired degree of reinforcement to be set. The hybrid reinforcement consists of a carbon or glass fibre grid joined with a permeable polyamide mat and will be available in roll form from industrial partners in the near future.

ERIC PIERREJEAN, CEO OF JEC GROUP

Mr. Eric PIERREJEAN, who joined the company in January, has been appointed Chief Executive Officer, succeeding to Mrs. Frédérique MUTEL. He will be in charge of the further development of the company after two decades of growth under Mrs. MUTEL leadership, dedicated to the development and the promotion of the composite materials industry. Before joining JEC Group, Eric PIERREJEAN was Division General Manager at Comexposium from 2011 to 2017. Prior to this, he spent much of his career in sales and marketing positions, spending more than 15 years in the automotive sector (BMW Group, Land Rover) as well as in the sports goods industry (Nike).

ADELINE LARROQUE, EVENTS DIRECTOR FOR EMEA

Mrs. Adeline LARROQUE joins JEC Group as Show Director JEC World and EMEA Events with more than 15 years of Global work experience as she has worked in several countries such as USA, UK, China, India, Qatar and UAE where she has developed a strong skill set in exhibitions and events management. After a successful experience at Reed Exhibitions France and China managing numerous exhibitions in the Aerospace, Material, Security, Maritime, Logistics, Construction and Medical industries, she then worked for Qatar Tourism Authority as Head of Exhibitions driving growth for the Doha Jewellery Show, Qatar Motor Show and Women Fashion exhibitions. Lately, she worked for the Events division of the Daily Mail Group supervising the Abu Dhabi International Petroleum Exhibition and Conference as Event Director.

With an investment in an Innovation Center with testing labs and additional production facilities, Carl Meiser GmbH&Co KG gives a clear statement to it’s location in Albstadt in Central Europe. As well this underlines the know-how and the motivation of the whole team. The constructions were already launched. The first buildings for production and a part if the Innovation Center will be ready end of this year. State of the art offices and social facilities will be ready to move in mid of 2019.

“After our suffered setback with the fire in our production facilities in November 2017, this investment will move us much more forward and will give us the motivation to offer our customers even better and more innovative service and products. In long-term view this will creates the base for further growth”, says Jens Meiser CEO of Carl Meiser GmbH&Co.KG. During the last months we already invested in production technology and machines. During the last weeks we changed the complete production organisation to reach a lean product flow.

As well Meiser expanded it’s apprenticeship programme during the last years. At the moment we apprentice new staff members in three different education programmes. It is planned to add a fourth in management in future.

The company Carl Meiser GmbH&Co.KG with it’s brand „MEISER – Know How in textiles“ delivers to the high end underwear and lingerie industry as specialised dyehouse for knitted fabrics. With the brand “NOPMA technical textiles” the company acts as a fast growing development and production partner for the aviation, automotive and furniture industry as well the protection fabric industry. For this industries coated fabrics are developed and delivered to the markets. “In this sector we grow continuous during the last years. We are convinced that our investment in the Innovation Center will support this growth next to our first presence as exhibitor on the fair Techtex in 2019”, says Jens Meiser.

In the approval phase the company was supported by the city of Albstadt in all necessary questions. Fast and possible solutions were found. This shows the Mittelstands-friendly climate in this region in south Germany. The invest is supported by the national programme “Spitze auf dem Land” by the country of Baden-Württemberg and the EU.

Built on an island right off the Finnish capital Helsinki, the Nolla cabin represents an ecological alternative to cabin life.

This summer, living with minimal emissions will be put to the test. Neste is building a prototype of a cabin that has a minimal environmental impact in terms of both carbon dioxide emissions and concrete impact on nature. The Nolla (= zero) cabin, designed by Finnish designer Robin Falck, is located just outside Helsinki city center, on the Vallisaari island. The cabin has been built from sustainable materials and is designed for a simple lifestyle with minimal to no emissions, taking into account the surrounding nature in every respect.

Located on the idyllic island of Vallisaari in the Helsinki archipelago, the Nolla cabin encourages people to consider how modern solutions and innovations could enable sustainable cabin living. Vallisaari has been in a natural state for decades and is thus the perfect location for an urban cabin experience, located at a 20-minute boat ride away from the Helsinki market square. The ecological and mobile Nolla cabin will be in Vallisaari until the end of September, demonstrating a lifestyle that generates minimal to no emissions.

Placing the compact and mobile cabin on its private lot does not require a construction permit
and it has been designed to use building materials as effectively as possible. The cabin is the size of a small bedroom and can be assembled and transported without heavy machinery, leaving its environment nearly untouched. The Nolla cabin has been designed by Finnish designer Robin Falck, whose earlier design, Nido cabin, has been globally acknowledged.

The Nolla cabin introduces solutions, which enable minimizing cabin life emissions remarkably. The energy supply of the cabin is entirely renewable; electricity is generated by solar panels, whilst the Wallas stove, reserved for cooking and heating, runs entirely on Neste MY Renewable Diesel, made 100% from waste and residue. The Aava Lines raft operating between Helsinki city centre and Vallisaari will also run on Neste MY Renewable diesel that can reduce greenhouse gas emissions by up to 90%.

“With the Nolla cabin, we want to offer visitors the possibility to experience modern cabin life in the realm of nature, with minimal emissions. An ecological lifestyle does not only require giving up unsustainable commodities, but also discovering modern, sustainable solutions that can be used instead. This has been an essential part of the design process”, says Falck.

“Finns are known for spending time at their beloved summer houses. We wanted to explore sustainable solutions that could enable cabin life with minimal emissions. Shared and circular economy, as well as new technologies and innovations have made it possible to enjoy our cabins without harming or burdening the environment. Some of the solutions that have been used at the Nolla cabin are perfectly adaptable at any cabin”, says Sirpa Tuomi, Marketing Director at Neste.

The Nolla cabin is executed in collaboration with Fortum, Wallas and Stockmann and is part of the Journey to Zero project by Neste, which explores new ideas and aims to steer the world towards a cleaner future with fewer emissions.

Koch Membrane Systems, Inc. (Koch), a global leader in membrane filtration technologies, announced its PURON® Membrane Bio-Reactor (MBR) modules have been selected for the Ji’nan Wastewater Treatment Plant I and Plant II Expansion Project. Each plant will have 100,000 m3/day treating capacity. The site is located in the Shandong province, which is China’s second-most populated province, with over 100 million people. This project continues the strong presence of Koch’s PURON® MBR in various municipal and industrial wastewater treatment projects in China, demonstrating exceptional performance and creating value to clients.

Strict new discharge requirements by the Chinese government are forcing municipalities to upgrade or build their wastewater treatment plants using new technologies. PURON® MBR technology was selected for these two new plants for its reliable and consistent effluent quality, adherence to new discharge limits, and reduced footprint compared to conventional wastewater treatment technology.

These wastewater treatment plants will be built and operated by China Everbright Water Limited Co. Ltd, a company principally engaged in construction and operation of integrated environmental water services. The project is expected to be commissioned by the end of 2018.

“We have had good experience with Koch Membrane Systems PURON® MBR technology in the 55,000 m3/day Beijing Daxing Tiantanghe Waste Water Treatment Project,” said Mr. Wang Huailin, president of Jiangsu Kaimi Membrane Technology Co. Ltd, who will design, build and supply the membrane system for these plants. “Since the 2016 Beijing plant startup, the PURON® membranes have been used in an underground construction model to provide a pollution-free installation. We have been impressed with the low fouling and low operating costs from the PURON® product, due to its unique single header and central aeration design features and the process expertise Koch brings to the table.”

“Koch has developed advanced membrane solutions for the municipal and industrial market segments,” said Mr. Manny Singh, president of Koch Membrane Systems. “Unique features of our PURON® product help the market treat wastewater to meet strict discharge and reuse targets with a low cost of ownership. We are excited that Everbright Water Group recognized the benefits of our PURON® product in their existing plant and selected us for their flagship new projects.”

CHOMARAT North America has just been awarded AS 9100 certification. CHOMARAT Group’s US facility that specializes in Advanced Composites reinforcements is located in Williamston, South Carolina. The new certification covers aerospace quality management systems and follows the Group’s development strategy relative to quality and risk management. “Our North American plant’s new AS 9100 certification proves our organisational maturity and provides a vital asset to enable us to become a leading aerospace supplier,” said Michel COGNET, Group Managing Director at CHOMARAT.

MEETING THE DEMANDS OF THE AEROSPACE MARKET
With this certification, CHOMARAT North America is following in the footsteps of the Group’s French plants that were certified to ES 9100 in 2012. The facility now meets the strict criteria set by the market for high performance composites reinforcements for the aerospace industry. The quality system and risk management standards are recognised by purchasers worldwide and is in line with the Group’s growth strategy for the aerospace market. “We are proud of this AS 9100 certification that clearly demonstrates our commitment to quality management and reliability. This accomplishment now allows us to compete as an international aerospace supplier from multiple continents!” said Brian LAUFENBERG, President of CHOMARAT’s NA business.

C-PLY^TM,
THE CHOMARAT REINFORCEMENT THAT HAS ALREADY PROVEN ITS WORTH IN THE AEROSPACE INDUSTRY
CHOMARAT has already made a name for itself in the aerospace market with fabrics, tapes and multiaxial carbon reinforcements, particularly its C-PLY™ range. These materials are designed for primary and secondary structures as well as aircraft interior parts. These highly modular materials offer great angle and ply flexibility and open up new opportunities for designing lighter, more efficient and lower cost composite parts. This is a huge advantage in a market with high productivity demands.
This is why C-PLY™ was recently chosen by VX AEROSPACE for their foldaway drone, which can be stowed inside a cylindrical container and deployed from a tactical aircraft. The carbon multiaxial material is used in the construction of the wing, the horizontal stabilizers, the vertical fin and all of the control surfaces. “There is no better material! The extremely thin multiaxial reinforcement is perfect, because strength and stiffness are tailored according to demand. It offers extremely high performance at a reduced cost.” said VX AEROSPACE Chief Engineer Bob SKILLEN.

• Additives, pigments and masterbatches for transportation, packaging, textiles & fibers
• Support to “future-proof” medical applications
• Contributing towards more sustainable engineering plastics

Clariant, a world leader in specialty chemicals, turns the spotlight on its increasing on-the-ground support and innovation focus for North America’s four key plastics application segments at NPE 2018 Booth S18155.

Clariant is pushing forward with plans for growth in the region by advancing R&D competencies, and increasing its manufacturing footprint and technical capabilities across its 50+ sites, 3 R&D and 6 technical innovation centers. Clariant’s innovations for the plastics industry include advanced additives, masterbatches and pigments which support the packaging sector in engaging consumers via differentiated, convenient solutions. At NPE, it will also highlight solutions for enhancing and protecting healthcare products, as well as its contribution to stronger and colorful textiles and fibers for everything from e-mobility to industrial applications.

Deepak Parikh, president of region North America, Clariant comments: “Clariant’s product innovation for the US and wider North American plastics industry embraces the region’s fastest growing end-use areas of automotive and construction. It also addresses the impact of trends driven by changing consumer lifestyle preferences and market regulations on other important segments such as packaging and healthcare.”

Transportation
Clariant brings color and protection to support the increasing use of engineering plastics and high temperture resins in automotive interiors, exteriors and under-the-hood. Halogen-free Exolit® OP 1400 provides outstanding flame retardancy to polyamide parts, enhances safety with UL 94 V0 performance down to 0.4 mm and enables the molding of complex parts with no mold deposits and blooming. Exolit OP 1400 has been awarded the Clariant EcoTain®label for outstanding sustainability and performance. At the same time, Clariant offers low-halogen controlled high-performance PV Fast® pigmentswith excellent migration and weather fastness properties to meet the high requirements of today’s transportation and automotive industry. Easy processing Renol® compounds and masterbatches for engineering and high temperature resins provide heat and light stability, and flame retardancy, while maintaining critical flow properties in parts like SMT connectors. Importantly, they are available as small lots which enables customers to purchase only what they require and contribute to a reduction in their carbon footprint.

Packaging
As US packaging manufacturers explore more consumer-friendly, lighterweight and appealing solutions, Clariant is on hand to support their functionality, sustainability-related and color desires. Clariant Pigments has an innovative cooperation with Konica Minolta and matchmycolor to enable fast, precise and efficient color matching of HDPE products, using select organic PV Fast and Graphtol® pigments that comply with FDA regulations. The ColorWorks®center in Chicago is dedicated to US brand managers and designers with teams of color design experts to create color formulations faster than ever before for bottles, caps, closures and films.

According to market reports, plastic pouches are gaining share from traditional pack types in packaged food and are mainstream in home care. To support smoother and more environmentally-compatible processing especially for film applications, Clariant offers an FDA-compliant, vegetable-based powder amide wax, Licolub® FA 1, which acts as a slip and anti-block agent. It is suitable for polyolefins and PVC.

Textiles & Fiber
At NPE 2018, Clariant puts the focus on strong and colorful textiles, carpets and industrial fibers. New AddWorks® TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min. Clariant also offers a broad range of colorants for polypropylene, polyester, polyamide and acrylic fibers, featuring migration fastness, chemical stability, light- and weather-fastness.

Healthcare
Clariant supports risk control and regulatory compliance for medical polymer and pharmaceutical packaging solutions. Its Mevopur® color and performance masterbatches and compounds include a USP Class 6 line of compliant products and multiple global ISO, 87, 88, and 661.1 certifications ahead of the market deadline. Clariant also offers selected FDA-compliant organic pigments and polymer soluble dyes that meet purity migration fastness as well as toxicological properties for medical devices and pharmaceutical packaging.

• JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.