From the Sector

To receive an award at PERFORMANCE DAYS is the ultimate industry recognition. In selecting the winners of the (ECO) PERFORMANCE AWARDS, the jury handles with total integrity with no outside influence and is absolutely free in making its decisions. This season there are so many outstanding innovations at the exhibition that two awards are announced!

WATER – OUR RESPONSIBILITY, the current FOCUS TOPIC for the next trade fair on November 28-29th, seems to have spurred the PERFORMANCE DAYS exhibitors to peak performances. The trade fair has highlighted innovations every season for the past ten years, but seldom have there been so many outstanding new developments. So many in fact, that two awards are to be presented: the ECO PERFORMANCE AWARD for best sustainable development, and the PERFORMANCE AWARD for a new functional highlight.  

And the winner of the ECO PERFORMANCE AWARD is:
The jury is highly enthusiastic about the nomination of the ECO PERFORMANCE AWARD winner and described the award-winning fabric as the best ecological solution currently available on the market. This extraordinary laminate from Jou Jou Fish combines various sustainable technologies. Article "JYRNP0002 307" consists of 100% recycled nylon and is designed with a micro-porous membrane (functional performance 15K/10K) that is produced without solvents. This saves a lot of water, plus the fabric is made from pre-dyed fibres (solution-dyeing) and the DWR coating is applied using a dry-finish treatment. The only thing that could improve it: as the polyamide is currently produced from postindustrial waste products, it would be nice to have option of using post-consumer polyamides in the future.

And the winner of the PERFORMANCE AWARD is:
The PERFORMANCE AWARD recognizes another pioneering development. Never before has there been such a fine, yet still tear resistant, highly functional fabric. The winner is article "DPQ 1092 DWR" from Green Threads and with only 17g/m² an absolute lightweight. Particularly fine nylon yarns are used (7d and 4d); a 4d yarn has never before been used in functional fabrics. This plus the extremely good tear resistance clinched it for the jury. Another plus for the winner: this lightweight fabric can achieve with just 17 g comparable performance values to a 50g fabric; thereby, not only is the weight significantly reduced, but also the amount of raw materials and energy consumed in production. This is also a factor that protects the environment when the garment is disposed at the end of its useful life.

Universal Linen Service of Louisville, KY, has earned the Hygienically Clean Healthcare certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing. Universal Linen Service is an independently-owned and operated linen service provider that serves all markets.

The Hygienically Clean Healthcare certification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

“Congratulations to Universal Linen Service on their certification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their commitment to infection prevention and that their laundry takes every step possible to prevent human illness.”

Twelve companies from eight different countries will receive a JEC Innovation Award at JEC Asia 2018. Asia-Pacific is an innovative region that sets the tone for all other regions of the globe. Once again, the JEC Innovation Awards highlight how composites bring solutions considering the new challenges in terms of efficiency, sustainability and life-cycle analysis.

This year, JEC Group awards innovations in the following categories: aerospace (structural and tooling), automotive, commercial vehicles, e-mobility, marine, railway, sports & leisure, infrastructure & civil engineering, industrial equipment, sustainability and additive manufacturing.

The ceremony will take place on Thursday November 15, 2018 at the COEX Center of Seoul (South Korea). Ida DAUSSY (Seo Hye-na), will host the ceremony in front of officials, manufacturers, scientists and composites professionals.

Category: AEROSPACE – STRUCTURAL
Winner: CSIR National Aerospace Laboratories (India)

Most of the composite structures for aircraft are made of carbon-epoxy composites, which can withstand a maximum service temperature of 130°C. As a consequence, carbon-epoxy materials cannot be used in hot zones like engine vicinity areas. The Aeronautical Development Agency (ADA) and CSIR-NAL took up the challenge of developing high temperature resistant composites for use in hot zones of light combat aircraft, which would result in significant weight and cost savings, as well as a considerable reduction in the meantime between failures (MTBF) due to thermal ageing.

The first task was to choose a material system with a service temperature of about ~ 200°C. During the material selection process, it was found that BMI resins are a relatively young class of thermosetting polymers. Hence, a carbon-BMI prepreg was selected due to a number of unique features including excellent physical property retention at elevated temperatures and in wet environments.

It was realized that weight savings and performance can be maximized using co-curing technology. This results in a large reduction of fabrication cycle times, costs and weight. Co-cured structures have fewer fasteners, which results in shorter assembly cycle times and also reduces sealing issues.

A prototype engine bay door assembly was built and tested at 180°C for flight certification. The engine bay door consists of an inner skin and co-cured outer skin assembly with eight transverse stiffeners. The stiffeners were designed with ‘J’ sections. The door size was 1.5 m length, 1 m width and 0.4 m overall depth. The co-cured door was developed using autoclave moulding. Two doors were installed in prototype aircraft and successfully flown.

The DyStar Group has released its 2017 – 2018 Sustainability Performance Report. Into its eighth edition, the report marks the progress of the global company that aspires to become the world’s most sustainable and responsible supplier of colorants, specialty chemicals, and services in the textile industry, but has also embarked on the business with food dyes and chemicals through its recent acquisition in USA.
The latest DyStar’s Sustainability Performance Report is the first of their reports prepared in accordance with the most trusted and widely used reporting framework – Global Reporting Initiative (GRI) Standards: Core Option.

The 2020 Target
2017 marks the seventh year of DyStar’s journey towards reducing the production footprint by 20% for every ton of production by the year 2020. This goal encompasses the resources used for production including energy, water, and raw materials as well as addresses their corresponding outputs – greenhouse gas (GHG) emissions, waste and wastewater. Results across most key performance indicators were positive, with four of the six 2020 targets being successfully met or surpassed.
In terms of the energy consumption and GHG emission, DyStar is farther from its original desired target primarily due to the impacts from three newly acquired production sites. However, intensive efforts are underway to ensure that the company’s less efficient acquisitions are provided the essential support to align with the rest of the company. DyStar is optimistic that all six targets are achievable by 2020.

Creating Responsible Products & Services
As part of DyStar’s long-term goal to imbed sustainability across the industry, they will also be focusing on expanding its sustainability services. This includes the opening of more Texanlab offices, an ISO 17025 certified, specialized testing laboratory across South Asia to provide end-to-end solutions throughout the whole supply chain.

Stepping Up on Cooperation with NGOs
Increasingly, DyStar is strengthening their partnerships with the Non-Governmental Organizations (NGOs). The 2017 report features an in-depth guest interview with the NGO China Water Risk, on how can suppliers like DyStar can be a role model in creating sustainable fashion.
To encourage and facilitate sustainable practices among its suppliers, DyStar also conducts sustainability-related supplier surveys. For instance, DyStar is cooperating with the Institute of Public & Environmental Affairs (IPE), one of the most established Chinese NGO, to expand the framework of their supplier questionnaire. In recognition of its efforts, DyStar received top ranking in the CITI transparency list for industrial chemicals from IPE, placing them well ahead of many other industry peers.

Embracing Diversity, Engaging Communities
Also, to help meet clients’ demand and demonstrate its responsibility and care in the food and beverages industry, DyStar is implementing a supplier diversity program to support businesses in the USA that are at least 51% owned by minority groups, women, veterans and people with disabilities.
Highlighting DyStar’s commitment to the communities they operate in, the company encourages volunteerism among employees, and for the year of 2017, DyStar employees devoted a total of 205 volunteer hours towards community projects, which also served as a meaningful collective experience for employees to form closer bonds.

Working Together Towards Long-Term Solutions
As an industry frontrunner, DyStar and its leaders are committed to driving sustainability across the
industry. However, significant challenges remain, and the stakeholders of this industry need to work together to derive long-term solutions. CEO of DyStar Group, Mr. Eric Hopmann emphasized, “It is imperative for the entire industry to improve collectively, not individually, and our ability to do so may determine the long-term profitability of the industry as a whole. It is my belief that effective partnerships coupled with stronger support and incentivization from leading companies within this industry could be key to creating a new – and much needed – equilibrium.”

To access DyStar’s sustainability reports, visit http://www.dystar.com/sustainability-reports/.

• Italian expertise, research and green innovation.
• METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

The guideline for restyling the METALBOTTONI range over the past two years has been the recent implementation of the NO IMPACT corporate sustainability protocol, which has just acquired a new “dress”, associated with the following pay-off: “Committed Accessories”. It is a way of underscoring the constant green development of the company over the past few years, in terms of process and product: use of recycled raw materials, development of finishing without chemicals, implementation of processes which today have allowed to reduce electricity and water consumption to almost zero.

Moreover the range of NO IMPACT proposals for this season has expanded to include not only new metal finishing but also leather label completely made from processing scrap, thus establishing Metalbottoni as “partner for branding elements” also in terms of sustainability. Pure Made in Italy and constant expansion of collections towards sportswear The great skill in metal processing, which for sixty years now has characterised the top-of-the-range quality of METALBOTTONI products, is now combined with constant research work conducted by our in-house Style Office, resulting in new collections which are more and more in line with the trends emerging from major trade fairs. Maintaining a presence on strong markets (central Europe, Northern Europe and United States), increasing the depth of segments and intercepting new ones. This is the main goal also chosen for the Première Vision Accessories Exhibition where, alongside the autumn-winter 2019/2020 collections, there will be a preview of VÀNITA, the new collection dedicated to leatherwear and more.

METALBOTTONI is proving to be one of the most dynamic companies in the accessory industry.

Over the past two years, in fact, it has introduced numerous product and process innovations, aiming at increasing its range especially as regards sportswear accessories. This trend was driven by a substantial increase in demand by read-to-wear and luxury brands in the past two seasons, and today it means new proposals which account for 35% of the range for METALBOTTONI. New collections have been presented in the past two seasons expressly dedicated to the sportswear world, namely GRAVITA, the first line designed by the company for pressure buttons, and MÀRYA, the new beachwear collection. Also the line called LABORA, the classic collection of accessories for fashion and ready-to-wear has been constantly enhanced with proposals combining style and technical performance. This mix of fashion and sport elements is increasingly evident in the company’s product range, for example in the combination of different materials, using metal with nylon or other resins to create new and unique accessories.

Vànita: beyond leatherwear, a world of accessories

The meeting between fashion, luxury and sportswear has produced VÀNITA, the brand new collection which presents a new approach to accessories dedicated to leatherwear, from an allround perspective from luxury to sportswear. Developed starting from solid product research by the company’s in-house Style Office, VÀNITA is a true meeting of styles and elements, a combination of high product standards with unique elegance. This line introduces one-of-a-kind visions for accessories, exploring highly original pathways dedicated to the world of leather. The VÀNITA proposal ranges from accessories for leatherwear and small leatherwear, to those for shoes, bags and the sportswear worlds. There are two main lines within this collection: one is expressly designed for the world of luxury, the other has a more technical and sporty approach. A true mix between artisan metal processing, based on the great METALBOTTONI expertise in this sector, and “ingredients” such as nylon, rubber finishes or innovative 3D processing, which are often combined together.

“Our goal is to offer an increasingly comprehensive range which allows us to explore new segments on the markets where we are present” - says Gregorio Valli, CEO and President of METALBOTTONI S.P.A – “a ‘recipe’ which should be able to integrate our unmatched product expertise with a constant expansion of our range and continuous implementation of our pathway towards corporate responsibility and sustainability”.

Aachen researchers have developed the adaptive textile facade green.fACade, which was presented on 2^nd August 2018 in the Aachen Faculty of Architecture of RWTH Aachen University, Germany. green.fACade is installed in front of a building like a second skin and can permanently reduce nitrogen oxide pollution in cities.

The researchers achieve the reduction of harmful nitrogen oxides (NO and NO2) by coating the facade with titanium dioxide. Titanium dioxide acts as a photo catalyst and enables the oxidation of nitrogen oxides to form washable nitrate (NO3-). Since the facade is also greened, it contributes to the conversion of carbon dioxide into oxygen by photosynthesis. In addition, a green facade creates an optical resting point in the cityscape and reduces urban heat through evaporation cooling. The enclosed pictures demonstrate how the introduction of green.fACade can have an effect. Picture 1 shows the Aachen Central Bus Station after, picture 2 before the possible introduction of green.fACade.

green.fACade is part of the innovative research project "adaptive textile facades", which uses the special properties of textiles. Thanks to its design, textiles can let sunlight and air through, thus contributing to a modern, aesthetic building design. A new feature of the research project is that further elements such as the titanium oxide coating or sun protection elements are integrated into the textile facade and placed in front of the existing building facade. The adaptive textile facade acts independently and thus reduces energy consumption through the positive climatic effects on the building facade.

"Adaptive Textile Facade" is part of a current research series with the aim of developing innovative facade constructions that are climate-neutral and increase the comfort of local residents. The research team consists of the three RWTH fields of architecture (Faculty of Architecture, PhD student architect M.Sc. Jan Serode), medicine (University Hospital RWTH Aachen, Clinic for Ophthalmology, Prof. Dr Walter) and textile technology (Institut für Textiltechnik, Prof. Dr Gries) and was able to contribute its expertise in the best possible way.

This summer the research team was supported for the first time by the Munich architectural office Auer Weber, represented by managing director Philipp Auer: "For us architects, developments in the field of textile outer shells are a special challenge. Here, highly developed textile materials and processing methods are combined with the lightness and grace of fabrics. Adaptive textile facade elements will increasingly turn the "building shell" into a "building skin", a system that not only offers weather, heat and sun protection, but is in constant intelligent exchange with its environment".

The great importance of these topics for the public was documented by the presence of Kirsten Roßels, representative of the Department of Economics, Science and Europe of the city of Aachen.  Ms Roßels explains: "As the city of Aachen, we are delighted with the innovative and future-oriented project ideas that are being developed at Aachen University, such as the adaptive textile facade. These developments underline the importance of Aachen as a city of science and I would appreciate it if these and other technologies could also become visible in Aachen in the future".

Prof. Dr Gries from the Institut für Textiltechnik sums up: "As textile researchers, we see a great opportunity to develop concrete solutions for our urban living spaces together with renowned experts from other disciplines. I'm sure we can make the urban climate more pleasant and reduce pollution."

• Product innovations, thought-leadership and the new certifications.
• A set of strategic green actions, aimed at increasing transparency and traceability in the company and throughout the industry.

Garmon Chemicals relaunches its commitment to an increasingly green and transparent use of chemicals. The new goal for the company, which in January 2018 has become part of the US Kemin Industries group, is to embark on an actual journey towards sustainability, integrating product innovation with increasingly distinctive strategic actions.

There are three main innovations spearheading Garmon’s commitment. The partnership with the ground-breaking project Alliance for Responsible Denim in the exclusive workshop “Doctor Visits”, held in London June 12. The new ISO 14001:2015 and ISO 9001:2015 process certifications.  The innovative “Stretch Care” collection which features a whole package of eco-compatible solutions, specific for finishing in the world of stretch fabrics.

In partnership with Alliance for Responsible Denim for the “Doctor Visits” workshop
On June 12, in London, the stage was set for “Doctor Visits” an event-workshop organized by Alliance for Responsible Denim focusing on the dissemination and promotion of best practices for sustainable manufacturing. The meeting was dedicated to six selected denim brands, which had a chance to meet the greatest experts in the finishing of indigo fabric.

Garmon Chemicals made available its inimitable experience as technical partner for finishing, as well as conducting team sessions with the Jeanologia staff, a leading company for eco-sustainable technological solutions. The six brands brought the finishing recipes of their Never out of Stock styles, to receive support and recommendations from the experts about the most innovative alternatives in terms of sustainability. The goal was to show the brands new possibilities to migrate towards more responsible finishing, improving their recipes as well. This was a way to reaffirm how ecodriven innovations can also increase finished product quality.
 
The new ISO certifications: increasingly high standards
Garmon Chemicals is also pleased to announce that it has been awarded two important certifications for compliance with ISO international standards as regards safety, reliability and quality. Reference is made here to ISO 9001:2015, a certification which sets international criteria for quality management systems, and most notably, to ISO 14001:2015, a standard acknowledged worldwide stipulating all requirements for an environmental management system. This certification, in particular, helps organizations improve their environmental management performance levels through a more efficient use of resources as well as by reducing production waste. Indeed ISO 14001:2015 mandates that an organization should take into account all aspects relevant to its core business. Amongst assessed parameters there are: air pollution, managing water resources and discharge, waste management, soil contamination, mitigation and adjustment to climate change, as well as an efficient use of resources.

These certifications, once again, provide evidence of the constant commitment on the part of Garmon for an increasingly sustainable use of chemicals, aimed at truly reducing its impact on humans and the environment.
    
A commitment which comes to life in the new “Stretch Care” collection
Introduced on the occasion of the Kingpins exhibition in April 2018, the new “Stretch Care” collection is a line of products completely dedicated to enhancing the qualities and performance of stretch fabrics. The special formulations developed for this line, with their cutting-edge raw materials, are especially suited for treatments with a high eco-compatibility rate; at the same time they optimize the production process. It is worth mentioning in particular the innovative Geopower NPS (= no pumice stone), a compound which helps eliminate pumice stone from denim washings, thus reducing environmental costs and impacts. Another ground-breaking product is Avol Oxy White, the innovative bleaching agent designed to achieve localized effects on denim. Thanks to its composition it is an ecologically advanced product whose environmental impact has been reduced to a minimum, a real challenge to the use of potassium permanganate which tends to be pervasively used as part of industrial processes.

“We firmly believe in developing sustainable chemistry” – concludes Donald Mulazzani, Marketing and Business Development Director at Garmon Chemicals – “not only in terms of product, but also as evidence of our responsible approach on several levels. In this way, we want to contribute to disseminating what will need to be the best practices in the future, for the whole industry”.

In line with the powerful global trend towards smarter fashion solutions, Iluna Group launches its Embroidery Division. Specialists in lace since 1985, the new Embroidery Division offers a complete and innovative product match in line with the modern expectations of brands and retailers. Staying true to Iluna’s DNA, the introduction of embroidery and guipure are all produced with only recycled materials.
IIn addition to the launch of the Embroidery Division, this season novelties include:

1. Of major interest today, the launch of velvet lace entirely made of sustainable materials including ROICA™ Eco-Smart family.

2. Within the Black Label collection, the Ultralight series is enriched with new multicolor floral galloons: here Iluna changes the color of the thread not only in the background, but also in the design, the same article reinvents itself in a variety of great visual impact.

3. Green Label collection, the Iluna dedicated range featuring a new responsible approach in respect of the planet and people, able to deliver innovation, beauty and quality, at 360°. In addition to the all over, jacquard, double jacquard and mesh offer, the line is also featuring new stretch Galloon laces fully made with GRS certified recycled materials, including the stretch thanks to the introduction of the unique ROICA™ sustainable yarn part of the ROICA™ Eco-Smart family.

4. ILUNA has strategically included in all their stretch laces only ROICA™ Eco-Smart family of sustainable yarns since some time.

5. ILUNA can also boast its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification that clarifies and communicates the company’s sustainable production commitment. In addition to this, all products are Oeko-Tex 100 certified.

6. ILUNA has created the new e-shop offering its exclusive materials to smaller companies looking for added values as: creativity, innovation, made in Italy and responsibility.

7. The whole collection is also visible online at its web site, previous registration, and orders can be done directly online always aiming to customers care.

For Schoeller Summer 2020 everything flows smoothly. The fabrics move with a fluid lightness in a closed ecological cycle. Upcycled products with ECONYL® yarn and the PFC-free ecorepel® Bio technology based on renewable raw materials are two ecological highlights of the 2020 Summer Collection, which is being developed and produced in the heart of the Swiss mountains. Color effects turn the functional textiles into exciting multicolors with contrasting reverses and fresh, modern plain colors that can easily be combined.

REGENERATED ECONYL® YARN
The textiles manufactured by Schoeller using ECONYL® yarn made from regenerated material are genuine upcycled products. The ECONYL® Reclaiming Program of Aquafil S.P.A. reduces global waste by collecting recyclable materials from landfill sites and the world’s oceans and returning them into the production cycle. The resulting yarn is no different from conventional textiles in terms of quality and appearance. The Schoeller fabric family with ECONYL® yarn encompasses a complete package with diverse exciting qualities such as ultra-light, bi-elastic schoeller®-dynamic (e.g. for windbreaker blousons), very soft, fine schoeller®-dryskin (e.g. for high-tech shorts) and lightweight schoeller®-WB-400.

ECO-CREATED
New, supersoft soft-shells with ECONYL® yarn are available with different backings and weights depending on the situation. The lightest schoeller®-WB-400 radiates a sense of summer in fresh tones such as melon, oxygen blue or khaki with a smooth jersey reverse in contrasting colors, also made from ECONYL® yarn. A slightly heavier quality surprises in classic black with an elegant, navy blue reverse, while the Bordeaux nuance of the soft-shell with its brushed reverse in stone grey feels warm, soft and cozy. The fluorocarbon-free ecorepel® bio-technology, based on renewable raw materials, offers sustainable water repellence.

WHITE MATTER
The dominant features of summer 2020, alongside sustainable textiles and technologies made from natural materials, are inspired multicolors. The comfortable, multicolored schoeller®-WB-400 qualities produce completely new color effects and create a cheerful look – both for outdoor activities and in urban sportswear. The combination of melon, ocean green and stone grey with white changes the mood of the original colors and lends the textiles an unexpectedly chalky, summery look. Another striking feature is the lightweight, white jersey backing, which is only revealed at second glance.

AUGMENTED ORIGINALS
The presentation of the authentic schoeller®-dynamic qualities is no less lively, ranging from mossy green tones and blue nuances through to the brown variations of tree bark. The multicolors combine perfectly with plain fabrics and are impressively functional thanks to the PFC-free ecorepel® bio-technology, which also provides reliable water repellence. The basic qualities of the lightweight schoeller®-dryskin trousers and jackets are given a touch of elegance in the form of a discreet sheen and fashionable colors. In soft blues and greens, these supple all-rounders are highly wear resistant and offer ideal moisture management through the microfibers on the inside. They also feature ecorepel® bio-technology for water repellence.

• Spanish outdoor and sportswear market leader expands international presence thanks to Lectra’s latest product lifecycle management solution

Ismaning/Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that the Ternua Group, a world-renowned Spanish outdoor clothing and sportswear group, has chosen Lectra Fashion PLM 4.0 to increase their geographical presence by improving global teamwork.

Founded in 1994, the Ternua Group has achieved worldwide success by promoting adventure through respect for nature, producing sustainable technical clothing for outdoor sports enthusiasts worldwide. The group’s strong commitment to the environment is shown through their R&D that focuses on developing their own fabric by using eco-friendly materials such as organic cotton and recycled down.

Today, the group’s portfolio includes three brands Ternua, Astore and Lorpen, currently exporting to more than 50 countries, with operations in Europe, America and Asia. Compounding this global success, the ambitious group plans to penetrate more markets across the globe.

The group is implementing Lectra Fashion PLM 4.0 into their entire production process. Specifically developed to help fashion companies navigate the digital era, this modular and user-friendly solution will help the Ternua Group centralize and store information coming from their brands by digitalizing their supply chain. This will connect all teams involved in the design-to-production process, regardless of geographic location. Team members will also be able to comm unicate better with external suppliers, access accurate information and keep track of every collection’s development progress. The group can hence speed up the entire production process and help their brands deliver their collections to markets all over the world on time.

“We manage our design and product development processes in-house but outsource our production in Europe, north of Africa and Asia. For our business to expand globally, we need to go fully digital. By having a system that consolidates and standardizes data coming from all supply chain actors across the world, we can respond faster to consumer demand,” explains Aitor Barinaga, Chief Operations Officer, Ternua Group. “We have assessed all other vendors—and Lectra Fashion PLM 4.0 is clearly the winner. It has the ability to fully integrate all processes and improve communication and teamwork across all departments through sound data management. We are more than happy to have a trusted partner as Lectra for such an ambitious project.”

“Ternua Group is constantly pushing the boundaries of innovation. This is shown through their desire to help customers achieve their personal best by providing them with high-performance technical wear that is also environmentally friendly. We are thrilled to embark on this new journey with the Ternua Group, and we are confident that our solution and expertise will help them get their collections out to new markets on time,” says Rodrigo Siza, Managing Director, Spain and Portugal, Lectra.