From the Sector

wear2wear is an innovative industrial partnership dedicated to high-quality and sustainable clothing. Five expert partners in Europe have come together to cover the entire recycling loop. On cutting-edge production systems, textile fibres from used clothing will be turned into functional fabrics. Schoeller Textil AG is supplying a wholistic textile portfolio for the workwear area. At Schoeller Textil, the recyclable, functional fabrics from the wear2wear concept belong to the Inspire fabric group. These are high-quality protective workwear fabrics made of 100 percent polyester, which offer the greatest clothing comfort and often feel just like cotton. They are also compliant with the stringent requirements of the bluesign® system.

The sustainable wear2wear concept is synonymous with high-quality, responsible clothing. In European operations, textile fibres from used garments are used to produce new functional fabrics. Depending upon the area of intended use, they also meet strict waterproofing, breathability, protection and comfort requirements. To ensure that the raw material cycle comes full circle, these textiles can be recycled again when they reach the end of their service life. As a result, there is no waste, and they go on to produce new garments. As the wear-2-wear partner companies guarantee that – from the quality of the raw materials to the guaranteed recycling end process – these are 100 percent recyclable, functional fabrics made of recycled textile fibres. Water- and dirt-repelling technologies based on renewable raw materials, along with the most advanced membrane technology, will ensure that the textiles are manufactured and impregnated entirely without the use of PFC in the future too.

Five partner companies  
The five European partner companies in the wear2wear cooperation cover the entire recycling loop. Heinrich Glaeser Nachfolger GmbH is a German fibre and yarn producer and the “recycler” in the loop. Märkischen Faser GmbH (D) is the “upcycler” and fibre manufacturer. Carl Weiske GmbH & Co. KG (D) develops the polymers, fibres, yarns, chemical additives and textile systems, and TWD Fibres GmbH (D), a fully-integrated filament yarn producer, covers the entire range of polyester and polyamide 6.6 continuous filament yarns. Schoeller Textil AG, the innovative Swiss company, is responsible for textile production and manufactures sustainable high-tech fabrics with maximum clothing comfort. The matching climate-neutral and similarly 100 percent recyclable PTFE and PFC-free membrane, as well as recycled outer materials and linings, are supplied by Sympatex Technologies (D), the ecological alternative among the textile function specialists. DutchSpirit is a Dutch company which has been dedicated to environment-friendly clothing since 2010. Its mission is to significantly increase the awareness for sustainable clothing and offer recyclable clothing in the workwear segment. DutchSpirit is the initiator for the development of the Inspire products from Schoeller Textil and provided the inspiration for the wear2wear concept. Further garment-making partners who now also belong to the cooperative group include: Anchor Workwear BV (NL), Hüsler Berufskleider AG (CH), Groenendijk Bedrijfskleding BV (NL), Bedrijfskledingdiscounter BV (NL) and Rifka'S (NL).

• Patented technology with bluesign®, ECO PASSPORT, and Skin Friendly certification

Polyester sport and functional textiles treated with Sanitized® Odoractiv 10 are protected against “permastink”. Already a holder of the Swiss Technology Award, the Sanitized® Odoractiv 10 odor-management technology can now carry the bluesign® sustainability label, the Skin Friendly certification from the Hohenstein Institute and the ECO PASSPORT by OEKO-TEX® label. SANITIZED AG has been a bluesign® system partner for over 10 years.

An unwelcome odor can quickly develop in polyester sport and functional clothing, even if freshly washed. This is “permastink”. It’s a challenge to the textile industry as it generally reduces the attractiveness and market opportunities of sport and functional clothing made from polyester.

The patented, non-biocidal Sanitized® Odoractiv 10 technology provides specific solutions and sales arguments for the end products. It works in two ways: The odor-causing bacteria can’t stick to the textile surface and are washed out completely in a normal wash cycle. This is due to the anti-adhesive “coating” applied in the padding process. This effect has been proven in a test procedure developed in cooperation with EMPA (Swiss Federal Laboratories for Material Science and Technology). Secondly, the treatment has an adsorbing effect. The odors are “trapped” and repeatedly expelled during a normal wash cycle.

No binder, no nano
Another characteristic: The treatment with Sanitized® Odoractiv 10 doesn’t apply an additional binder system. As with all of our products, SANITZED AG uses no nano technology. The safety and tolerability have been confirmed by the Skin Friendly certification from the Hohenstein Institute and ECO PASSPORT by OEKO-TEX® label. These have now been joined by the bluesign® accreditation.

• conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

Twelve companies from eight different countries will receive a JEC Innovation Award at JEC Asia 2018. Asia-Pacific is an innovative region that sets the tone for all other regions of the globe. Once again, the JEC Innovation Awards highlight how composites bring solutions considering the new challenges in terms of efficiency, sustainability and life-cycle analysis.

This year, JEC Group awards innovations in the following categories: aerospace (structural and tooling), automotive, commercial vehicles, e-mobility, marine, railway, sports & leisure, infrastructure & civil engineering, industrial equipment, sustainability and additive manufacturing.

The ceremony will take place on Thursday November 15, 2018 at the COEX Center of Seoul (South Korea). Ida DAUSSY (Seo Hye-na), will host the ceremony in front of officials, manufacturers, scientists and composites professionals.

Category: AEROSPACE – STRUCTURAL
Winner: CSIR National Aerospace Laboratories (India)

Most of the composite structures for aircraft are made of carbon-epoxy composites, which can withstand a maximum service temperature of 130°C. As a consequence, carbon-epoxy materials cannot be used in hot zones like engine vicinity areas. The Aeronautical Development Agency (ADA) and CSIR-NAL took up the challenge of developing high temperature resistant composites for use in hot zones of light combat aircraft, which would result in significant weight and cost savings, as well as a considerable reduction in the meantime between failures (MTBF) due to thermal ageing.

The first task was to choose a material system with a service temperature of about ~ 200°C. During the material selection process, it was found that BMI resins are a relatively young class of thermosetting polymers. Hence, a carbon-BMI prepreg was selected due to a number of unique features including excellent physical property retention at elevated temperatures and in wet environments.

It was realized that weight savings and performance can be maximized using co-curing technology. This results in a large reduction of fabrication cycle times, costs and weight. Co-cured structures have fewer fasteners, which results in shorter assembly cycle times and also reduces sealing issues.

A prototype engine bay door assembly was built and tested at 180°C for flight certification. The engine bay door consists of an inner skin and co-cured outer skin assembly with eight transverse stiffeners. The stiffeners were designed with ‘J’ sections. The door size was 1.5 m length, 1 m width and 0.4 m overall depth. The co-cured door was developed using autoclave moulding. Two doors were installed in prototype aircraft and successfully flown.

• Successful acquisition of Austrian plastics recycling company Ecoplast Kunststoffrecycling GmbH

Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces today that it has fully acquired the Austrian plastics recycler Ecoplast Kunststoffrecycling GmbH (“Ecoplast”). Based in Wildon, Austria, Ecoplast processes around 35,000 tonnes of post-consumer plastic waste from households and industrial consumers every year, turning them into high-quality LDPE and HDPE recyclates, primarily but not exclusively for the plastic film market.

The expectation of Borealis is that the recycled PO market will grow substantially by 2021, which is the strategic rationale behind the acquisition. The company has made PO recycling a key element of its overall PO strategy because of its potential to support both growth and sustainability. Borealis has been an industry frontrunner in making polyolefins more circular. In 2014, it began offering high-end compound solutions to the automotive industry, consisting of 25% and 50% post-consumer recycled content. Borealis was also the first virgin PO producer to explore the possibilities of mechanical recycling, by acquiring one of Europe's largest producers of post-consumer polyolefin recyclates - mtm plastics GmbH and mtm compact GmbH – in July 2016. Since then it has continued to invest into the development of technology and new products in the area of circular polyolefins.

“Borealis recognises the increasing need for plastic recycling and sees the Circular Economy as a business opportunity. Borealis already has a long-term collaboration with Ecoplast and this acquisition is the next logical step in building our mechanical recycling capabilities. As an important complement to mtm in Germany, Ecoplast will help us address critical sustainability challenges and become a polyolefin recycling leader. Eventually, we want to use our experience to develop an effective blueprint for the end-of-use phases for plastics that can be applied in other parts of the world,” says Borealis Chief Executive Alfred Stern.

“We are very happy that the transaction with a strong and reliable partner such as Borealis has been successfully concluded and are looking forward to our common future activities on the recycling market. We have located potential synergies in many operative and strategic areas, especially in product quality R&D and future applications of polyethylene-film-recyclates. The combination of Ecoplast and Borealis holds the potential to be groundbreaking for the market,” says Ecoplast’s Managing Director Lukas Intemann.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
  They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
• Diresul® blacks & greys, a cosmos of greys and deep black and navies
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma

Wolford is recognized for high quality Skin wear and is a favorite among fashion influencers. Wolford realizes that when it comes to luxury, consumers expect brands to be responsible. In response, Wolford understands sustainable luxury is a new brand ingredient and are dedicated to expanding their collections each season and infusing responsible materials.

This July at Interfiliere, gain a sneak peek into the launch of Wolford’s Aurora collection of leggings and pullovers that are Cradle to Cradle gold certified, first one in the world! The new styles created use premium stretch yarn belonging to the ROICA™ Eco-Smart family, the world’s first yarn awarded Cradle2Cradle Material Health Gold Level Certificate and Hohenstein Environment compatibility certification, which provides evidence of compliance and offers confidence as a responsible choice. In addition to premium stretch yarn from ROICA™ Eco-Smart family, the Aurora pieces are made using two other responsible fibers, Lenzing Modal® a cellulosic fiber derived from sustainable forestry, and infinito® by Lauffenmühle, a specially modified oil based biodegradable polymer.’

Instead of using new materials, Wolford’s new collection is developed to return the ingredients back to the cycle, they simply borrow them for the lifetime of the product, which supports responsible product ingredient sourcing. At the end of the Aurora collection product lifecycle, Wolford will return them to an industrial composting station to naturally breakdown without releasing harmful environmental substances. Wolford is committed to becoming part of the solution and activating change as they continue to explore responsible material innovations.

Be sure to attend Première Vision NY Smart Talk on July 17th, 2018 at 2:00p to meet to Wolford’s own Andreas Roehrich, Director, Product Develoment & Innovation to discuss technology and Wolford’s quest to become a responsible luxury brand.
 

• Lenzing will hold 51 percent in a future joint venture
• Largest single line dissolving wood pulp plant in the world
• Basic engineering and permitting process to be kicked off
• 43,000 hectares FSC® certified plantation secured
• Final investment decision subject to outcome of basic engineering expected in 2019

Lenzing Group, world market leader in specialty cellulosic fibers and Duratex, the largest producer of industrialized wood panels of the Southern Hemisphere, announce that they agreed on the terms and conditions to form a joint venture to investigate building the largest single line dissolving wood pulp (DWP) plant in the state of Minas Gerais, close to Sao Paulo, Brazil. This decision supports the backward integration and the growth in specialty fibers, defined in Lenzing’s corporate strategy sCore TEN.

The joint venture will investigate the construction of a 450,000 t DWP plant, which is expected to become the largest and most competitive single line DWP plant in the world. Dissolving wood pulp is the key raw material for the production of Lenzing’s bio-based fibers. For the future operation, the two companies have secured a plantation of 43,000 hectares that will provide the FSC® certified biomass. The plantation is fully in line with Lenzing’s wood and pulp sourcing policy. The basic engineering and the application for required permits and merger clearances will now be started.

Lenzing will hold 51 percent of the joint venture which will operate the mill, while Duratex’s share will be 49 percent. The estimated cash investment by the joint venture for the construction of the DWP mill is expected to be somewhat above USD 1 bn (based on current FX rates, net of generic tax refunds and the outcome of the basic engineering study). The joint venture will supply the entire volume of dissolving wood pulp to the Lenzing Group. This step is an essential milestone in the group’s ambition to grow its specialty fibers business.

“Specialty cellulosic fibers are an important contribution to make the global textile industry more sustainable. In line with our corporate strategy sCore TEN we are committed to strong organic growth in this field. We are pleased that with Duratex, a recognized leader in sustainable forestry management, we have a strong partner in this joint venture. Together we will create a very sustainable and competitive raw material base for Lenzing’s global expansion plans”, says Stefan Doboczky, Chief Executive Officer of Lenzing Group.

“Projects of this nature are the result of our strategic plan and of our team’s effort towards drawing Duratex’s future. The Company is known for its financial solidity, high quality, innovation and sustainability; the results of a history spanning over six decades. The partnership with Lenzing for the construction of the largest single line dissolving wood pulp plant in the world is an honor for Duratex. Working with Lenzing, a global benchmark in technology, high quality and corporate governance makes us very proud. We are sure that this joint venture is going to be successful”, affirms Duratex’s Chief Executive Officer Antonio Joaquim de Oliveira.

The final investment decision to build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

This July at Interfilière, discover responsible innovation and well-being at the ROICA™ booth.

ROICA™ partners create innovative fabrics for the Modern Wardrobe. See, feel, imagine and learn why brands are choosing ROICA™, view the collection of superior functional fabrics that revolutionize the premium stretch market, thanks to advanced yarn solutions dedicated to specific needs of the contemporary consumer.

Spearheading the stretch market, ROICA™ elevates new standards for intelligent contemporary consumers. ROICA™ representatives will excite you as they demonstrate functionality, their advanced color technology system, and show you a fantastic range of stretch innovations from smart shapewear to soft compression that can enhance designs. Come visit the ROICA™ booth to learn about the ongoing commitment to responsible innovation and creativity. As you enter, you will experience 3 Modern Wardrobe concept zones that showcase:

1. ROICA™ Lifestyle – a beautiful selection of commercial lingerie, swimwear and nightwear items from leading brands that include ROICA™, embracing the ROICA™ Eco Smart family of yarns.

2. ROICA™ Innovation – an exciting area that shares our textile partners’ innovations to inspire endless possibilities. This area will showcase lingerie concept garments for brands that will spark ideas for AW 19/20.

3. ROICA™ Lab – the zone that navigates you toward the latest hi-tech Modern Wardrobe solutions. This zone hosts unmatched premium stretch performance designed to exceed contemporary business and consumer desires belonging to ROICA™ Eco-Smart family and ROICA™ Feel Good family .

ROICA™ Eco-Smart family, the world's first range of responsibly made premium stretch fibers creating ROICA™ smart yarns that offer sustainable solutions with prestigious certifications:

• Global Recycling Standard (GRS) Version 3.0 certified by Textile Exchange - ROICA™ Version 3.0 yarn constructed with more than 50% pre-consumer recycled content.
• Cradle to Cradle Certified™ Gold for product and ingredients - ROICA™ yarn evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

ROICA™ partners featuring ROICA™ Eco-Smart family include:
Giemme, Iluna Group S.p.A, Maglificio Ripa S.p.A, M.I.T.I. Spa, Penn Textile Solutions, Sofileta, Tessitura Colombo Antonio Tintex Textiles

ROICA™ Feel Good family, a brilliant range of advanced stretch fibers that deliver personal performance and measurable wellness. Thus, providing freshness and comfort metrics perfect for travel, sport, leisure and more. The family now offers a premium innovation:

• ROICA™ CF, an innovative yarn that neutralizes odors thanks to an active ingredient interlocked within the yarn. This durable stretch yarn offers a fantastic property to every wearer.

ROICA™ partners featuring ROICA™ CF include: Maglificio Ripa S.p.A., TINTEX Textiles.

ROICA™ also presents the following families through our textile partners’ innovations within the ROICA™ Innovation area:

• ROICA™ Color Perfect family - advanced color technology system that delivers a perfect color match finish with an undetectable matte look for the stretch materials.
• ROICA™ Contour family - high performance stretch yarn control that delivers a calibrated form optimizing power, softness and comfort.
• ROICA™ Resistance family - innovations linked to durability and functions to match particular applications including heat and chemical resistance in make and wear.

• Visit Archroma at China Interdye 2018, Booth A100, April 11-13, 2018, at the ShanghaiWorld Expo Exhibition & Convention Center, Shanghai, China

Archroma, a global leader in color and specialty chemicals, will present at China Interdye 2018 its latest technologies, under the motto: “Enhanced solutions for color and performance, it's our nature”.
With a heritage of more than 130 years, Archroma provides solutions that combine performance, safety and low impact on resources. The company can draw on its extensive formulation and technical know-how to offer a constant flow of eco-advanced and innovative new in dyestuff and pigments, as well as process and functional chemicals.
Solution packages for innovation

Visitors at Archroma’s Booth A100. will be able to ‘experience’ Archroma's innovative solutions, in particular:

• EarthColors, traceable from nature to fashion
  The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
  The EarthColors have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.
   
• Color Atlas, a game-changing system for fashion design
  The Color Atlas by Archroma® is a groundbreaking platform specially devised to address the needs of designers, brands, retailers, and manufacturers, enhancing creative possibilities for the industry as well as manageability and time to market through key complementary tools: The six-volume ‘Color Atlas Library’ with 4,320 color swatches and cotton poplin samples, the ‘Color Atlas Compact’ in two volumes for increased portability, and the ‘Color Atlas Online’ allowing to capture an inspiring image using a smartphone and immediately identify the closest Color Atlas shade palette, with the possibility to purchase a color sample instantly.
   
• ‘Zero add-on’ formaldehyde finishing and coloring solutions
  Since January 1, 2016, formaldehyde is classified by ECHA5 as “may cause cancer” (Carc. 1B). Archroma offers a unique proposition combining: Fixapret® Resin WFF, a “zero add-on” formaldehyde anti-wrinkle finishing system and Helizarin® EcoSafe a “zero add-on”4 formaldehyde printing system. With Fixapret® Resin WFF, and Helizarin® EcoSafe, consumers can enjoy end-products that look good, whilst saving on precious resources and being gentler on the skin.
   
• Sanitized® Odoractiv 10, active odor control function for polyester textiles
  Visitors at the booth will be able to experience a new unique dimension of odor control function for functional polyester textiles. The newly developed wash-resistant Sanitized® Odoractiv 10 has a dual-action effect: on the one hand it prevents the bacteria from docking on the textile, and on the other, it adsorbs odors whilst the garment is being worn.

Spotlight on automotive solutions
Having acquired a 75% stake in the M. Dohmen group, a specialist in textile dyes and chemicals for automotive, carpet and apparel, Archroma is now in the position to extend its offer in expert products and services. M. Dohmen will be present at the show at Booth A118.

Solution packages for sustainability
Brand owners and retailers around the world are taking action to evaluate the environmental impact of textile treatment, dyeing and finishing processes in response to consumer concerns.
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.