From the Sector

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Reifenhäuser Cast Sheet Coating - specialists for cast film, sheet extrusion and extrusion coating lines - will showcase a new production process for cost-effective film/nonwoven composites with an exceptionally low grammage at ICE (International Converting Exhibition) Europe. The leading international trade show for paper, film, and foil conversion and processing will be held at Messe München (Munich trade fair center) from March 15-17, 2022.

The Covid-19 pandemic and current supply shortages have exposed the dependence of companies on global supply chains. This situation is both a warning signal and an opportunity to boost and reorganize the local production of semi-finished products from the ground up. Reifenhäuser Cast Sheet Coating has now developed a trend-setting production process termed Ultrathin Coating, in particular for the sector of medical protective clothing. The process will permit customers to produce particularly lightweight film/nonwoven composites with greater cost efficiency and, as a result, more competitively. The patent-pending process has several advantages: It cuts film grammage by 66%; material consumption in the overall composite is reduced by 28%; and it slashes costs by up to 34% compared to conventional semi-finished products. Significant cost savings are achieved in various ways, for example, by replacing hotmelt adhesives, which reduces line maintenance to a great extent at the same time.

Mark Borutta, Sales & Marketing Specialist bei Reifenhäuser Cast Sheet Coating, erklärt: „Wir erleben derzeit einen nachhaltig wachsenden Mehrbedarf für medizinische Schutzbekleidung verbunden mit einer Rückholstrategie für lokale Produktionskapazitäten. Vor diesem Hintergrund erzielen Produzenten mit ‚Ultrathin Coating‘ einen schnellen Return on Invest und hohe Profitabilität – auch bei einer Produktion innerhalb Europas.“ Die Vlies-erfahrene Schwesterfirma Reifenhäuser Reicofil –führender Hersteller von Vliesstoffanlagen – hat die Entwicklung unterstützt.

Mark Borutta, Sales & Marketing specialist at Reifenhäuser Cast Sheet Coating, explains: "We are currently experiencing a sustained increase in demand for medical protective clothing combined with a return strategy for local production capacity. Against this backdrop, producers achieve a fast return on investment and high profitability with Ultrathin Coating - even when production is based in Europe." The sister company, Reifenhäuser Reicofil, an experienced and global leading manufacturer of nonwoven lines, provided their support to the development.

Even if manufacturers already produce medical protective clothing and prefer to handle the coating process internally in the future instead of importing the necessary composites, it is worthwhile to set up an in-house production facility. In either case, the investment in Ultrathin Coating usually pays for itself in less than 12 months. The lower material input also reduces the consumption of fossil raw materials and this in turn responds to the increased demand for more sustainable products.

• INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

INDA also announced Bryan Haynes, Ph.D., R&E Technical Director Kimberly-Clark, has been named Chairman of the Board. Barbara Lawless, Vice President Sales and Marketing, Medical Products, Precision Fabrics Group, Inc. has been elected Vice Chair of Finance, and Richard Altice, President and CEO of NatureWorks, has been appointed to INDA’s Executive Committee.

The new board members are:

• Jürgen Eizinger, Senior Commercial Director, Nonwovens Business EU/AM/MEA, Lenzing Group

Eizinger has nearly 20 years of fiber industry experience. He has been with the Lenzing Group since 2001 and most recently was Vice President of the Global Nonwoven Business. He has worked at multiple locations around the world and held various commercial, engineering and technical customer services roles.

• Jim Posa, President and General Manager, Bast Fibre Technologies, Inc.

Posa has 30-plus years of nonwovens experience and has successfully led businesses from startups to some of the largest companies in the nonwovens market. He has developed and implemented strategic business, development, operational and acquisition growth plans. His teams have worked with businesses focused on most of the major end use markets such as hygiene, wipes, filtration, medical and industrial. As a senior executive, Posa has led global businesses at Fiberweb, BP/Amoco, CEO of a Nisseki/Amoco joint venture (ANCI), Lydall, and Nitto America. A long-time INDA supporter, he has previously served on committees and as a Board member.

• Markus Mueller – Sales Director and Board Member, Reifenhauser Reicofil

Mueller brings to the INDA Board 35 years of experience with Reifenhauser in the nonwovens and film industries. His experience has included roles as PLC Engineer, Commissioning Engineer, Project Manager and Sales Manager. Mueller has extensive knowledge of the global hygiene and medical nonwovens markets. He holds a degree in Electrical Engineering from the Technical University of Cologne.

• Matt Koele, Director of Global Materials Development, Rockline Industries

Koele is based at Rockline’s headquarters in Sheboygan, WI.  Before joining Rockline in 2012, he has held several business and Research and Development (R&D) leadership positions at SC Johnson and Kimberly-Clark Corporation. An inventor with over 10 patents, Koele is a magna cum laude graduate of Michigan Technological University in Chemical Engineering.

• Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company

Clark joined H&V in 2003 and has held numerous leadership positions in the U.S. and Germany. He previously served as the President of the High Efficiency and Specialty Filtration Division from 2009 to 2020.  Before joining H&V, Clark was a strategy consultant for eight years working with Fortune 100 manufacturing companies. He holds a bachelor’s in Mechanical Engineering from Rensselaer Polytechnic Institute.

• Andrew Stocking, Ph.D., President and CEO, Principle Business Enterprises, Inc. (PBE)

Stocking joined PBE in 2017 after a career in engineering, technology, nonprofits and government. He was named President and COO in 2018, then President and CEO in 2020, becoming the third-generation leader of the family-owned organization. He previously held roles in the private sector and within federal government offices, including the Department of Energy and Congressional Budget Office. He earned a BS in Chemical Engineering and an MS in Civil Engineering from Stanford University, and a Ph.D. in Resource Economics from the University of Maryland.

The 21-member board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by a majority vote of INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus four appointees.

• A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

Launched in 2017, Startup Booster has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 500+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega…
This challenge not only represents an opportunity to the winners of the trophy but to all the parts involved: participants, jury, official partners and the worldwide audience of JEC World. It brings the entire composites value chain together, creating future business opportunities.

The 20 finalists are divided into two categories:
• Process, Manufacturing & Equipment
• Materials & Products

The jury includes representatives from major manufacturers and investors:
Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite, Airbus
Karl-Heinz FULLER, Head of Future Outside & Materials Mercedes-Benz AG
Florent ILLAT, Head of Safran Corporate Ventures, Safran
Brian KRULL, Global Director of Innovation, Magna Exteriors
Tim VORAGE, Founder and Manager Growth Garage Accelerator , Mitsubishi Chemicals Advanced Materials

Two pitch sessions of 10 presentations each will be held in the Agora stage (Hall 5), on Tuesday, May 3, from 10am to 11.25am (Category: Products & Materials) and from 4.30pm to 5.55pm (Category: Process, Manufacturing & Equipment). Three winners will be chosen by the jury and one winner for the sustainable aspects of the project. The awards ceremony will be held on Wednesday, May, 4th at 2.45 pm.

Category “Products & Materials”
o Blackleaf (France)
o Dongnam Realize (South Korea)
o FibreCoat (Germany)
o FVMat (Israel)
o Ora Graphene Audio (Canada)
o Pangolin Defense (France)
o Phononic Vibes (Italy)
o Revolve (Germany)
o Smart Resilin (Israel)
o Space Walker (Japan)

Category “Process, Manufacturing & Equipment”
o Antefil Composite Tech (Switzerland)
o ANYBRID (Germany)
o Atomic-6 (USA)
o Carbon-Drive (Germany)
o Continuum (Denmark)
o Fibraworks (Germany)
o Herone (Germany)
o RVmagnetics (Slovakia)
o Touch Sensity (France)
o XARION Laser Acoustics (Austria)

Morocco has created an optimal basis for companies with the introduction of the duty-free zone. RINCO ULTRASONICS will take advantage of this opportunity and strengthen its own position in the Moroccan market by establishing RINCO Morocco. RINCO Morocco will act as a center for the African continent. The automotive industry as well as the textile industry are particularly well represented locally.

RINCO ULTRASONICS AG, headquartered in Romanshorn, Switzerland, has specialized in the development and manufacture of ultrasonic welding machines and ultrasonic cutting systems since its founding in 1976. RINCO products are used for reliable welding of plastic parts as well as for cutting food and synthetic textiles.

• 76 KL/Day water saving by optimizing pH analysis process in dye vessels
• A step closer to achieving the ‘Huntsman Horizon 2025’ goal
• Potential savings of over Rs 10 crore or USD146,000 annually from the project

Huntsman Textile Effects, the global leader in innovative and environmentally sustainable dyes, chemicals, and digital inks, has successfully implemented a water conservation process to improve water efficiency and reduce net water usage at its Baroda facility, which is located in the western region of India. The initiative undertaken at the plant aims to save around 76 kilo liters of Reverse Osmosis water per day by modifying the phase sequence in the pH measurement program.

Water is used extensively throughout textile processing operations. The amount of water used varies widely in the industry, depending on specific processes operated at the plant, equipment used, and policies concerning water use. This conservation project at the Baroda Plant will have a potential savings of Rs 10 crore or USD146,000 a year for the organization.

Speaking on the development, Mark Devaney, Vice President Manufacturing and Operations Excellence, Huntsman Textile Effects said, “At Huntsman, we recognize the important role we play in creating a more sustainable future and are committed to the well-being of the communities where we operate, and the protection of the environment. We are continually looking for ways to improve the environmental footprint of our manufacturing sites and have been implementing numerous projects in recent years to reduce our water usage.”

“The team has done a detailed assessment of the pH analysis process in dye vessels, mapping the existing water usage and potential conservation method. After a brief study and several brainstorming sessions, we were able to adjust the phase sequence, resulting in conservation of Reverse Osmosis water by almost 76 kilo liters of water per day.” said Kavishwar Kalambe, Site Director, Huntsman Textile Effects. “This project directly contributes to Huntsman’s Horizon 2025 goals to reduce net water usage at facilities in water-stressed regions,” he added.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

• High performing face stock paper delivers convincing results for multiple applications
• Sappi product portfolio of face stock papers ist being expanded with Parade Label SG from its Gratkorn site

Sappi, manufacturer of numerous packaging and speciality papers for a wide range of markets, is launching the Parade Label SG, a one-side coated face stock label paper that excels in terms of properties such as printability, opacity and stiffness, as well as with its many options for further processing.

• Semi-gloss face stock paper with high-quality performance characteristics
• Suitable for a wide range of applications, e.g. labels for food, non-food, HABA and VIP
• Available in 77, 78 and 80 gsm
• Manufactured in Gratkorn, one of the largest and ultra-modern paper mills in Europe

Sappi offers an extensive range of base papers for wet-glue and self-adhesive labels. With its new Parade Label SG, the company is now introducing a one-side coated, semi-gloss face stock label paper that is approved for direct contact with food and that complies with DIN EN 71 for toy safety. The range of applications includes labels for food, non-food, beverages and health and beauty aids (HABA), as well as for logistics and variable information printing (VIP) due to its excellent thermal transfer printability.

The fibre-based face stock solution guarantees high-quality results in printing and finishing, through the entire production and converting chain. It features high stiffness and resilience, so the label will not be damaged and will fit accurately even after labelling.

Sappi invests in customer proximity
To ensure 100 percent availability and fast delivery of its label papers, Sappi has proactively positioned itself for the future and set the course for reliable production and seamless supply chains – with its plants in Alfeld, Carmignano and Condino. The plant in Gratkorn, where Sappi has invested in new technical equipment, has now been added to the list. With modern production facilities, from paper machines to finishing technology, as well as extensive expertise in the production of coated papers, the site has everything in place to ensure top-class products. Available capacity is being expanded gradually to include the production of Parade Label papers alongside existing graphical grades.

Because of the central location of Sappi’s production site in Gratkorn, Parade Label SG can be supplied quickly throughout Europe and beyond. The short transportation distances save greenhouse emissions and protect the environment; shorter production cycles then enable good availability and fast supply. Parade Label SG is certified for direct food contact and available in grammages of 77, 78 and 80 g/m². Sappi can provide Parade Label SG with FSC or PEFC certificates on request.

Sappi will be presenting its new developments in the field of label papers, among others, at the upcoming LabelExpo Europe in Brussels in April 2022.

Under the ClusterXchange pilot scheme, the EXTRATEX partnership organised a 5-day exchange in Czech Republic, hosted by CLUTEX (cluster for technical textile).

15 participants visited strategic and innovative companies in the field of smart materials and advances technologies, as well as research centres and the Liberec University.

During the exchange, 92 B2B meetings were organized between local companies and the exchange participants, with 75% of the contacts established leading to follow-ups after the conclusion of the exchange. This collaboration laid the foundation for potential cross-border and cross-sector business collaboration, and participants of the physical exchange improved their competences in the field of smart materials and advanced technologies.

According to a testimony from the company Bipier Srl, their participation in the exchange allowed the establishment of two important working relationships with Bcb Informatica Y Control and Vyskummy Ustav Chemickych (Research Institute for Man-Made Fibers). This cooperation wil allow Bipier Srl to equip their machines with quality temperature control, and to expand the distribution of their products.

Cologne (Germany), and Online  ++ more than 70 participants registered - 250 expected ++

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

The third session of the conference, "Sustainability and Circular Economy", highlights crucial issues with regard to the overall goal of keeping the environmental impact of cellulose fibres low. A core theme of the session is the responsible use of wood and forests. With this objective, the five speakers of the session discuss the importance of circular concepts for cellulose feedstocks. Exciting insights into the important "Hot Button Report" are offered by Canopy. The "Hot Button Report” enables the producers of cellulose fibres to better understand the impact their raw materials have on forests and the climate development worldwide.

Final program: https://cellulose-fibres.eu/program/