From the Sector

Reset
53 results
(c) Coperion GmbH
24.06.2022

Coperion: New Development for Plastic Fiber and Flake Recycling

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

Increased Throughput in Numbers
With a ZSK 58 Mc18 twin screw extruder, the throughput increase and thus the potential of the new ZS-B MEGAfeed becomes very clear. When recycling PA fibers with a bulk density of ~40-50 kg/m3, throughputs of 70 kg/h were previously achieved using conventional equipment. When the PA fibers were fed into the ZSK extruder using the ZS-B MEGAfeed, throughputs increased about fourteenfold to 1,000 kg/h. Similar results were achieved recycling carbon fibers with a bulk density of ~50-70 kg/m3; in this case, throughputs increased from 50 kg/h to 2,500 kg/h using the ZS-B MEGAfeed. When recycling PCR (Post-Consumer Recycled) flakes, throughputs increased from 50 kg/h to 700 kg/h, and from 80 kg/h to 1,300 kg/h with multilayer film flakes.

Key to Economical Recycling of A Wide Variety of Plastics
Plastics previously considered not recyclable are becoming a valuable raw material using the new Coperion ZS-B MEGAfeed. For example, PCR flakes or recyclate from carbon fiber-reinforced plastics can now be fed into the ZSK extruder at high feed rates and recycled economically.

In the case of mechanical upcycling, upstream processes necessary for compounding, such as compacting, melting and agglomeration, are completely eliminated using the ZS-B MEGAfeed technology. In this recycling process, flakes and fibers can be fed directly into the ZSK extruder, where they are melted, compounded, devolatilized, and filtered in a single step. In so doing, both investment costs and energy consumption drop. The production process becomes significantly more efficient. Moreover, the thermal product stress is reduced and recyclate quality increases.

Even when recycling PET, the feed rate is no longer a limiting factor. With the ZS-B MEGAfeed, PET flakes and fibers can be fed into the ZSK twin screw extruder in large quantities with no pre-drying or crystallizing, where they can be processed with the highest degree of profitability.

The ZS-B MEGAfeed can also feed large quantities of post-consumer waste, adding appreciable value to the chemical recycling process with the ZSKs. ZSK throughput rates are very high with the ZS-B MEGAfeed. Preheating of the recyclate via mechanical energy input of the twin screws thus becomes even more economical for further processing in the reactor.

Existing Coperion extruders can be retrofitted with ZS-B MEGAfeed technology to greatly expand their spectrum of applications and increase their throughput rates.

Source:

Coperion GmbH / Konsens Public Relations GmbH & Co. KG

22.06.2022

Avgol® wins Innovation Award at the RIGHT Hygiene conference

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

“By bringing the Biotransformation technology to the various potential markets in India, we hope to offer a real-world solution to waste management,” he said. “We particularly hope to address aspects of the creation of fugitive waste and remove this from the environment without causing additional, and potentially more dangerous, problems.”

Source:

Avgol

(c) Freudenberg Performance Materials Holding SE & Co. KG
21.06.2022

Freudenberg endorses further products with ECO-CHECK label

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Healthcare applications
In the field of healthcare, the bio-based M 1714 wound pad with superior absorption for more challenging wounds has now been endorsed with the ECO-CHECK label. The dressing consists of a mix of bio-based fibers derived from natural sources and exhibits a smooth wound contact layer. The product has been evaluated for industrial compostability and conforms to ISO 13432.

Architectural applications
The sustainable TF 400 Eco F mesh fabric for textile architecture from Mehler Texnologies® now also bears the ECO-CHECK label. Its yarn is made of 100% recycled PET bottles and its characteristics are very similar to those of conventional mesh fabrics. In 2021, it was awarded first place by the Architectural Membrane Association (AMA) in the “product” category in recognition of its properties.

Shoes
In the shoe industry, the binder-free strobel insoles have been endorsed as particularly sustainable. They contain a high percentage of recycled green bottle flakes. Moreover, the insoles themselves are fully recyclable.

Filtration applications
The two layered, needle-punched nonwoven filter medium that has just been endorsed with the ECO-CHECK label has impressive sustainability characteristics. Made entirely of polyester, more than half the fibers consist of recycled material.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

17.06.2022

Beaulieu Technical Textiles: going green with sustainable geotextiles

  • BTT’s woven geotextiles can reduce CO2-emissions in infrastructure projects by a factor of 10 compared to more conventional methods
  • Product specific Environmental Product Declarations for woven geotextiles transparently communicate their sustainability
  • EPDs an essential tool to communicate sustainability performance
  • Helps carbon-conscious customers in their purchasing and decision making

Beaulieu Technical Textiles (BTT) has unveiled the next step in its mission to deliver sustainable solutions to customers - product specific Environmental Product Declarations (EPD), an essential tool for communicating sustainability performance - to fully support green certified construction projects by providing accurate information in readily available formats.

The carbon footprint of BTT’s woven geotextiles is amongst the lowest in the industry, making them one of the most sustainable solutions for civil engineering projects. An EPD shows a manufacturer's commitment to measure and reduce the environmental impact of its products and report these impacts in a very transparent way.

  • BTT’s woven geotextiles can reduce CO2-emissions in infrastructure projects by a factor of 10 compared to more conventional methods
  • Product specific Environmental Product Declarations for woven geotextiles transparently communicate their sustainability
  • EPDs an essential tool to communicate sustainability performance
  • Helps carbon-conscious customers in their purchasing and decision making

Beaulieu Technical Textiles (BTT) has unveiled the next step in its mission to deliver sustainable solutions to customers - product specific Environmental Product Declarations (EPD), an essential tool for communicating sustainability performance - to fully support green certified construction projects by providing accurate information in readily available formats.

The carbon footprint of BTT’s woven geotextiles is amongst the lowest in the industry, making them one of the most sustainable solutions for civil engineering projects. An EPD shows a manufacturer's commitment to measure and reduce the environmental impact of its products and report these impacts in a very transparent way.

Construction products, like geotextiles, follow the very comprehensive European standard, EN 15804+A2. The third-party verification and approval by the international EPD® System officially demonstrates the low environmental impact of BTT’s geotextile products.

 

More information:
geotextiles Beaulieu
Source:

Beaulieu

 Innova Fabrics chooses ROICA™ V550 by Asahi Kasei for its responsible RF (Residual Free) line (c) Innova Fabrics
Innova Fabrics Residual Free Line
11.05.2022

Innova Fabrics chooses ROICA

  • ROICA™ V550 by Asahi Kasei for its responsible RF (Residual Free) line

Innova Fabrics, the Italian manufacturer of knitted fabrics for apparel, underwear and sports, confirms its choice of ROICA™ by Asahi Kasei, the Japanese leader of premium stretch fiber, for its new responsible line RF (Residual Free).

Despite the deep-rooted history of the company's team in the world of textiles, Innova Fabrics is a reality that is not afraid to innovate with a focus on environmental sustainability. As a result of its push for local production and attention to third-party sustainability certifications (including OEKO-TEX Standard 100, one of the world's best-known labels for textiles tested for harmful substances), Innova Fabrics continues its promise of responsibility with an enrichment of its conscious proposals. In the last season, Innova has increased its smart proposition by launching the RF (Residual Free) line, with the aim of reducing the impact of microplastics residues produced by the fashion industry. This is possible thanks to the combination of two responsible ingredients: SENSIL® Biocare by Nilit and ROICA™ V550 by Asahi Kasei.

  • ROICA™ V550 by Asahi Kasei for its responsible RF (Residual Free) line

Innova Fabrics, the Italian manufacturer of knitted fabrics for apparel, underwear and sports, confirms its choice of ROICA™ by Asahi Kasei, the Japanese leader of premium stretch fiber, for its new responsible line RF (Residual Free).

Despite the deep-rooted history of the company's team in the world of textiles, Innova Fabrics is a reality that is not afraid to innovate with a focus on environmental sustainability. As a result of its push for local production and attention to third-party sustainability certifications (including OEKO-TEX Standard 100, one of the world's best-known labels for textiles tested for harmful substances), Innova Fabrics continues its promise of responsibility with an enrichment of its conscious proposals. In the last season, Innova has increased its smart proposition by launching the RF (Residual Free) line, with the aim of reducing the impact of microplastics residues produced by the fashion industry. This is possible thanks to the combination of two responsible ingredients: SENSIL® Biocare by Nilit and ROICA™ V550 by Asahi Kasei.

SENSIL® BioCare is the premium, sustainable nylon 6.6 fiber enriched with a special technology that helps reduce the persistence of textile waste in the ocean and landfills by acting during and after the product's life cycle. Therefore, if the microplastics in SENSIL® BioCare garments are released during washing, they will decompose much faster than conventional Nylon 6.6 fibers, reducing textile waste. ROICA™ V550, part of the ROICA Eco-Smart™ family, is the premium, sustainable stretch yarn that degrades without releasing harmful substances into the environment, according to the Hohenstein's environmental certification. ROICA™ V550 also carries the Gold Level Material Health certificate from the Cradle-to-Cradle Product Innovation Institute, which evaluated the yarn's impact on human and environmental health. The strong relationship established between Innova Fabrics and ROICA™ by Asahi Kasei is a long-standing one: from the very beginning, the textile company chose ROICA™ as its main reference for premium stretch, using ROICA Colour Perfect™ in most of its articles. Having experienced the innovation of the ROICA™ line dedicated to high-quality color, Innova decided to opt for the ROICA Eco-Smart™ line as part of the extension of its environmentally conscious line.

Thanks to the constant synergy with its premium partner in innovative and responsible stretch, Innova continues its path towards a textile and fashion industry that respects the planet, without forgetting profit. And this is just the beginning. Innova Fabrics pieces containing SENSIL® BioCare and ROICA™ V550

Source:

C.L.A.S.S.

(c) Reifenhäuser
01.04.2022

Reifenhäuser Reicofil showed sustainable Nonwovens at IDEA 22

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwoven-film composites with low grammage
For the medical sector, Reicofil showcased its leading solutions for high-barrier medical protective clothing and - together with its sister business unit Reifenhäuser Cast Sheet Coating - the pioneering Ultrathin Coating production process, which enables customers to produce film-nonwoven-composites more cost-effectively and thus competitively.

Smart digitization
With the c.Hub, the new data platform of the Reifenhäuser Group, Reicofil offers its customers a digitization solution that is tailored to the requirements of nonwovens production.

More information:
Reifenhäuser IDEA nonwovens digital
Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

29.03.2022

C.L.A.S.S. SMART VOICES: A Spotlight On Water Saving Solutions

According to the United Nations Conference of Trade and Development, the fashion and textile industry represents one of the major polluters of water in the world, with an estimated 93 billion cubic metres of water used per year.

On the occasion of Water Day, C.L.A.S.S. CEO and Founder Giusy Bettoni talked to Sensil® BioCare, Kornit, Ecoalf and Unesco on how their strategies and processes can preserve our most precious, yet limited resource.

Key Takeaways from the Speakers:
"The ocean is absolutely crucial for the survival of this planet, since it almost covers 71 percent of its surface. Writer Arthur Clarke once said: how inappropriate is to call this planet earth, when it is clearly planet ocean."
- Francesca Santoro, Programme Specialist at IOC UNESCO Regional Bureau for Science and Culture in Europe

According to the United Nations Conference of Trade and Development, the fashion and textile industry represents one of the major polluters of water in the world, with an estimated 93 billion cubic metres of water used per year.

On the occasion of Water Day, C.L.A.S.S. CEO and Founder Giusy Bettoni talked to Sensil® BioCare, Kornit, Ecoalf and Unesco on how their strategies and processes can preserve our most precious, yet limited resource.

Key Takeaways from the Speakers:
"The ocean is absolutely crucial for the survival of this planet, since it almost covers 71 percent of its surface. Writer Arthur Clarke once said: how inappropriate is to call this planet earth, when it is clearly planet ocean."
- Francesca Santoro, Programme Specialist at IOC UNESCO Regional Bureau for Science and Culture in Europe

"Sensil® BioCare is our solution to reduce the persistence of textile waste in the ocean. We embedded technology in it so that if any microfiber is released in the washing, they will break down faster than conventional nylon. Based on an external study, we have seen an almost 60 percent microplastic reduction in two years"
- Michelle Lea, Vice President Global Marketing at Nilit

"When it comes to our printing processes, almost no water is in use and the waste is minimal. We have never seen this before in this industry. Based on LCA tests, when compared to screen printing our "Atlas Max" printer saves up to 93 percent of water, while the "Presto" printer saves up to 95 percent of water".
- Michal Arbel, Sustainability Communication Lead at Kornit Digital

"One of the most important projects of the company is Upcycling the Oceans, with the aim of tackling the marine litter in collaboration with the fishing sector. Last year, we collected 300 tons of litter from the seabed, and we promoted circular economy by transforming the waste in products."
- Irene Diez, Director at Ecoalf Foundation

Archroma Launches Nylosan® (a) Archroma
Archroma launches long-awaited metal-free* and halogen-free* Nylosan® S navy and black colors for sportswear.
23.03.2022

Archroma Launches Nylosan®

  • Long-awaited metal-free* and halogen-free* NYLOSAN® S NAVY and BLACK COLORS for Sportwear
  • Iconic black and navy polyamides of major sportswear brands can finally be perfectly matched with safer dyestuffs
  • Significant resource savings when dyeing with Archroma new signature CONSCIOUSLY DEEP system

Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced the addition of two new metal-free* and halogen-free* acid dyes in its Nylosan® S range.

Dark shades represent approximately 80% of the outdoor and sportswear textile market, which is also under pressure to offer more sustainable articles. In this context, the new Nylosan® Navy S-3R and Black S-3N, especially developed by Archroma for polyamides and blends, meet four long-standing market demands for blacks and navies.

  • Long-awaited metal-free* and halogen-free* NYLOSAN® S NAVY and BLACK COLORS for Sportwear
  • Iconic black and navy polyamides of major sportswear brands can finally be perfectly matched with safer dyestuffs
  • Significant resource savings when dyeing with Archroma new signature CONSCIOUSLY DEEP system

Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced the addition of two new metal-free* and halogen-free* acid dyes in its Nylosan® S range.

Dark shades represent approximately 80% of the outdoor and sportswear textile market, which is also under pressure to offer more sustainable articles. In this context, the new Nylosan® Navy S-3R and Black S-3N, especially developed by Archroma for polyamides and blends, meet four long-standing market demands for blacks and navies.

  • First, the Nylosan® S range offers metal-free* alternatives to dyestuff generally used to dye polyamide and nylon and which usually contain metals. The new Nylosan® Navy S-3R and Black S-3N are taking the industry standard one step further by offering a halogen-free* option to those manufacturers, brands and retailers who are looking to offer the safest grade available.
  • Second, the Nylosan® S range now comprises a wide gamut of colors, with these new dyes targeting the color matching and fastness specifications of the iconic blacks and navies of major sportswear brands. In order to support this color matching process, Archroma makes available the colorimetric dye primaries for the mills in order to (re)match the color standards.
  • Third, the new navy and black dyes display the same color constancy as the dyes used in many leading color standards, which means the navy and black colors created with Nylosan® S range will be non-metameric to the color standard under multiple light sources, whether artificial or natural, indoor or outdoor.
  • And fourth, the introduction of the new Nylosan® Black S-3N makes dyeing a metal-free* black on polyamide finally possible – something that was not available before.

Both dyes display the other usual features allowed of the Nylosan® S range, i.e., high fastness and buildup, and a wide shading gamut for industry-leading metal-free* acid dyes. They are REACH registered and bluesign® approved.

In addition, with the new Nylosan® Navy S-3R and Black S-3N at the core of its new CONSCIOUSLY DEEP system, Archroma is offering another very welcome benefit in the production of polyamide articles: resource saving. As most sportswear manufacturers and brands know, creating durable dark colors on nylon is a complex process that uses massive amounts of water and energy. Archroma therefore designed the new CONSCIOUSLY DEEP system to allow a highly efficient scour dyeing process reduced from 6 to 2 baths. This results into reducing the process time by up to 36%, water consumption by up to 64%, energy by up to 46%, and CO2 emissions by up to 41% compared to conventional benchmark process.

Source:

EMG

Lenzing’s pavilion makes a green debut at Intertextile Shanghai Home Textiles (c) Intertextile Shanghai Home Textiles
Intertextile Shanghai Home Textiles
09.03.2022

Lenzing’s pavilion makes a green debut at Intertextile Shanghai Home Textiles

Sustainability has become a major trend in the global home textiles industry. It is more common nowadays to find natural and sustainable fibres in an extensive range of home furnishing products. From this angle, the Lenzing Group (Lenzing) will take led in a brand new pavilion at Intertextile Shanghai Home Textiles – Spring Edition. Lenzing is the world’s leading manufacturer of renewable specialty fibres, and will highlight the latest eco-friendly fibres that can meet the ever-rising sourcing demand. The fair is set to take place from 14 – 16 April 2022 at the National Exhibition and Convention Center (Shanghai).

Sustainability has become a major trend in the global home textiles industry. It is more common nowadays to find natural and sustainable fibres in an extensive range of home furnishing products. From this angle, the Lenzing Group (Lenzing) will take led in a brand new pavilion at Intertextile Shanghai Home Textiles – Spring Edition. Lenzing is the world’s leading manufacturer of renewable specialty fibres, and will highlight the latest eco-friendly fibres that can meet the ever-rising sourcing demand. The fair is set to take place from 14 – 16 April 2022 at the National Exhibition and Convention Center (Shanghai).

As an upswing from the growing public awareness of environmental issues, consumers are now more willing to switch to sustainable products. According to a CottonWorks’ survey, 90% of the interviewed Chinese consumers want their home textiles to be environmentally friendly[1]. It also found that more consumers are paying attention to the fibre content that can deliver safe and sustainable home textiles.
Furthermore, the Chinese government’s ‘Outline Of the Development of the Textile Industry during the 14th Five Year Plan’, also encourages the acceleration of low cost, functional and sustainable renewable fibres in the local textile industry.

The Lenzing satellite pavilion: a one-stop platform for green home textile materials
To help home textile suppliers source a variety of eco-friendly materials efficiently, one of the fair’s long-time exhibitors is set to form a new pavilion at the upcoming Spring show. Lenzing, the Austrian brand widely known for its ecologically responsible production of specialty fibres made from renewable raw material wood, gathers seven of its local downstream supply chain manufacturers to showcase their renewable products.

Mr David Dai, Senior Commercial Director Textile China of Lenzing spoked about why they decided to organise a new pavilion at the show: “As we received positive feedback from our pavilion at Intertextile Shanghai Apparel Fabrics, our business partners from the home textile supply chain were hoping for a similar arrangement in this sector. We believe all the participating manufacturers can benefit from this pavilion by finding ways to better serve their clients and consumers.”

Brands in the Lenzing satellite pavilion will include:
•    Lenzing Group will introduce the first Carbon-zero TENCEL™ fibres which are CarbonNeutral™ certified products by Natural Capital Partner.
•    Botou Jinglun Textiles Co Ltd focuses on new fibre yarns. The company develops multi-component yarns for cotton, wool, silk and linen with combinations of MODAL, TENCEL™ fibres and various functional materials.
•    Fujian Yongtai County Huaerjin Textile Co Ltd provides high-quality, natural, renewable pure and blended yarns including TENCEL™ fibres, US cotton, Australian cotton, acrylic cotton, silk and other plant-based yarns.
•    Jiangsu Dasheng Group Co Ltd has one of the largest cellulosic fibre yarn spinning mills in China and focuses on producing top-quality home textiles.
•    Qingdao Textiles Group produces natural fibres, cellulose fibres, copper antimicrobial fibres and other nature-based materials for home and contract textiles.
•    Suzhou Zhenlun Spinning Co Ltd is an advanced enterprise specialising in regenerated cellulose yarns like ECO VERO, FSC Viscose, Circulose, Carbon Zero Yarn and more.
•    Ton Design Industrial Co Ltd produces medium and high-end bedding fabrics. The brand’s TENCEL™ Lyocell fibres and TENCEL™ fibres blend cotton series products are certified by Lenzing.
•    Wuxi Tianmu Extra Width Printing Dyeing Co Ltd mainly produces extra-wide, high-count and high-density down-proof fabrics and fabrics for bedding. The technique can handle different procedures for dealing with pure cotton, bamboo fibres, TENCEL™ fibres and other fibre fabrics.

In addition to the new pavilion, a number of other featured exhibitors will also showcase their sustainable products at the fair. This includes Cotton Council International (CCI) promoting US cotton fibres and cotton products, and Zhangjiagang Coolist Life Technology Co Ltd bringing their unique bedding products made from organic and environmental-friendly materials.

(c) nova-Institut GmbH
19.01.2022

International Conference on Cellulose Fibres 2022 presents final program

The final program will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens, packaging and composites will offer a look beyond the horizon of conventional application fields.

You can expect to see the “Top 6” candidates of the “Cellulose Fibre Innovation of the Year 2022” in Cologne. For the second time, the innovation award will be granted to the innovative cellulose fibre industry for developing new technologies and applications. All producers and inventors along the entire value chain from feedstock to the final product are invited to join the competition. The Cellulose Fibre Innovation of the Year 2022 Award will be voted for by conference delegates as well as online participants on the afternoon of 2 February.

The final program will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens, packaging and composites will offer a look beyond the horizon of conventional application fields.

You can expect to see the “Top 6” candidates of the “Cellulose Fibre Innovation of the Year 2022” in Cologne. For the second time, the innovation award will be granted to the innovative cellulose fibre industry for developing new technologies and applications. All producers and inventors along the entire value chain from feedstock to the final product are invited to join the competition. The Cellulose Fibre Innovation of the Year 2022 Award will be voted for by conference delegates as well as online participants on the afternoon of 2 February.

The internationality of this Cellulose Fibres gathering is reflected in its colourful line-up of international speakers. 42 speakers from 12 countries will demonstrate the differences in regional development paths and their transferability to other areas.

You can view the final program here.

04.01.2022

Cellulose Fibres: New Technologies for Pulp, Fibres and Yarns

  • Session "New Technologies for Pulp, Fibres and Yarns"

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

  • Session "New Technologies for Pulp, Fibres and Yarns"

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

The extensive fifth conference session, “New Technologies for Pulp, Fibres and Yarns”, includes the participation of eight speakers and promises the reveal of various innovations and new approaches. These address the processing of pulp, fibres and yarn, with the aim of realizing most sustainable and efficient solutions. The broad spectrum of topics ranges from processing cellulose with ionic liquids, material farming and chemical modification of pulp to functionalised fibres for feel-good textiles.

Speakers of the Session "New Technologies for Pulp, Fibres and Yarns"

  • Antje Ota - Deutsche Institute für Textil- und Faserforschung (DITF) (DE): The Versatility of the HighPerCell® Technology for Cellulose Filament
  • Carlo Centonze - HEIQ (CH): HeiQ AeoniQ – Cellulose Yarn Focussed on Climate and Circularity
  • Manuel Steiner - LIST Technology AG (CH): Cellulose Dissolving Technology Platform
  • Dominik Mayer - Kelheim Fibres (DE): Functionalized Viscose Fibres for Wellbeing Textiles: How Infrared Celliant® Viscose supports a Healthy and Sustainable Lifestyle
  • Michael Sturm - TITK (DE): Method for the Evaluation of the dissolution Power and dissolution Quality of Cellulosic Raw Materials dissolved in New Ionic Liquids
  • Kaoutar Aghmih - Hassan II University (MA): Rheology and Dissolution of Cellulose in Ionic Liquid Solutions
  • Ofir-Aharon Kuperman - Weizmann Institute of Science (IL): Material Farming and Biological Fabrication of Cellulose Fibers with Tailored Properties
  • Taina Kamppuri - VTT Technical Research Center of Finnland (FI): Chemically Modified Kraft Pulps to Improve the Sustainability of Regenerated Fibres
CCF2022 New Opportunities for Cellulose Fibres in Replacing Plastics
Session "Recycling and Other Alternative Feedstocks"
29.12.2021

New Opportunities for Cellulose Fibres in Replacing Plastics

  • Session "Recycling and Other Alternative Feedstocks"

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

  • Session "Recycling and Other Alternative Feedstocks"

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

The fourth session, "Recycling and other alternative raw materials", will cover topics ranging from textile recycling - both cotton and regenerated cellulose fibres - to the use of hemp shives as raw material. Self-initiated cooperation and waste management pave the way to a fully closed European material loop where textile waste is collected, recycled and reprocessed into new raw materials.

The speakers will demonstrate the importance of cooperation in recycling fabrics already in circulation, perfectly following the topics and discussions of the previous conference day.

  • Heikki Hassi - SciTech-Service (FI):  Textile Recycling and MMCFs; Systemic Challenges, Market Opportunities and Advancing Technologies
  • Valerie Langer - Canopy (CA): The Perfect Storm – A Five Year Feedstock Shift Forecast
  • Helena Claesson - Södra (SE): Two is better than one – Lenzing and Södra together Face the Challenge of Recycling of Textiles
  • Marina Crnoja-Cosic - Kelheim Fibres (DE) and Harald Cavalli-Björkman - re:newcell (SE): Sustainable Cellulosic Fibres from Recycled Raw Materials – A Solution for Europe
  • Frank Meister - Thüringisches Institut für Textil- und Kunststoff-Forschung (DE): Lyohemp Fibres Made of Dissolving Pulp Based on Hemp Shives
  • Miguel Sanchis-Sebastiá - ShareTex (SE): Expanding Textile Recycling Beyond Cotton: Innovations to Recycle Regenerated Cellulose Fibers
New Opportunities for Cellulose Fibres in Replacing Plastics (c) nova-Institut
Nicolas Hark - nova-Institut (DE)
08.12.2021

New Opportunities for Cellulose Fibres in Replacing Plastics

  • Second Session of the International Conference on Cellulose Fibres 2022

Cellulose fibers are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibers through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibers and yarns. In addition, examples of non-wovens, packaging and composites will offer a look beyond the horizon of conventional application fields.

  • Second Session of the International Conference on Cellulose Fibres 2022

Cellulose fibers are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibers through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibers and yarns. In addition, examples of non-wovens, packaging and composites will offer a look beyond the horizon of conventional application fields.

The second session of the conference: "New Opportunities for Cellulose Fibres in Replacing Plastics", will focus on questions such as: "What is the impact of the ban on plastics on single-use products?" and "What are the latest regulatory issues and policy opportunities for cellulose fibres?".  This section presents new opportunities for replacing fossil-based insulating materials with cellulose-based technologies that can be used for a variety of applications, from aerospace to mobility, as well as in construction. For the program just click here.

Speakers of the Session "New Opportunities for Cellulose Fibres in Replacing Plastics":

  • Nicolas Hark - nova-Institut (DE): Opportunities in Policy for Cellulose Fibres
  • Paula Martirez - Stora Enso (SE): Last years Winner Papira® – an Eco-revolution in Foam Packaging
  • Stefanie Schlager - Lenzing (AT): LENZING™ Fibres for Sustainable Single use Products
  • Sascha Schriever - Institut für Textiltechnik der RWTH Aachen University (DE): Cellulose Aerogel Non-wovens – Sustainable Insulators of Tomorrow
17.11.2021

C.L.A.S.S. welcomes Sensil® BioCare by NILIT into its material hub

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

Sensil® BioCare sustainable premium Nylon fiber is enhanced with a technology, that helps lessen the persistence of textile waste in sea water and in landfills. With its embedded technology, if any microfibers of Sensil® BioCare garments are released during washing, they will be broken down at a quicker rate compared to conventional Nylon 6.6 fibers when they end up in the oceans. Tests were conducted in both landfill soil and sea water simulations to understand the potential impact of Sensil® BioCare on both ecosystems. Specifically, initial testing following the ASTM D6691 Standard Test Method For Determining Aerobic Biodegradation Of Plastic Materials In The Marine Environment and the ASTM D5511 Standard Test Method For Determining Anaerobic Biodegradation Of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions indicates that Sensil® BioCare yarns break down more rapidly (with a biodegradation of about 40% in 500 days) than conventional nylon. These promising findings point to reduced waste accumulation in both oceans and landfills.

NILIT, owner of the sustainable brand SENSIL®, has also teamed up with The Ocean Foundation’s Blue Resilience Initiative to reestablish and safeguard essential ocean meadows and other coastal habitats. These marine grasslands, which are being damaged at a rate of two football fields every hour, are vital ecosystems for sequestering CO2 from the atmosphere, thus reducing global warming and ocean acidification. In addition, ocean grasslands sustain sea life, defend coast lines against erosion and storm surge, and support economies around the world.

NILIT’s plant in Israel, who produce Sensil ® Biocare boosts, renowned certifications such as GRS (Global Recycled Standard)*, ISO 9001**, ISO 14001*** and ISO 45001****. Moreover, the company has already announced that all other plants in  the USA, China and Brazil will be ISO 14001 certified within 2021 and ISO 45001 certified within 2025. Worth to mention, 40% of Nilit’s team is made up of women.

Source:

C.L.A.S.S.

Intertextile Shanghai Home Textiles provided vital business platform (c) Messe Frankfurt (HK) Co Ltd
25.10.2021

Intertextile Shanghai Home Textiles provided vital business platform

Intertextile Shanghai Home Textiles concluded its 27th autumn edition in early October. Held alongside four other concurrent textile shows, the fair was the only major event for this sector able to take place in China during this season, providing a much-needed business platform for 735 exhibitors and 20,106 trade buyers. The fair was held at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd expressed: “Due to the valuable cooperation of many parties and the continued support of our exhibitors and other partners, we were able to hold the fair as scheduled despite a number of challenges. Since the pandemic situation was brought under control in China last year, we have expended considerable resources to ensure our textile fairs still take place to provide trading platforms that connect the global industry. This edition was especially important as it was the only major fair to take place in the country at this time.”

Intertextile Shanghai Home Textiles concluded its 27th autumn edition in early October. Held alongside four other concurrent textile shows, the fair was the only major event for this sector able to take place in China during this season, providing a much-needed business platform for 735 exhibitors and 20,106 trade buyers. The fair was held at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd expressed: “Due to the valuable cooperation of many parties and the continued support of our exhibitors and other partners, we were able to hold the fair as scheduled despite a number of challenges. Since the pandemic situation was brought under control in China last year, we have expended considerable resources to ensure our textile fairs still take place to provide trading platforms that connect the global industry. This edition was especially important as it was the only major fair to take place in the country at this time.”

While a number of international exhibitors participated this year with individual booths, the Belgium Pavilion presented home and contract products and five Chinese regional pavilions from Hangzhou, Shaoxing, Huzhou, Haining, and Tongxiang also featured. Two trend forums also provided inspiration for 2022, while the IKASAS Japanese Home Design Gallery, New Voices of Top Youth Upholstery Designers City Roving Exhibition and China International Fiber Art Exhibition gave further insights into various aspects of the industry.

Fair’s fringe programme highlights sustainability, design and more
As with all of Messe Frankfurt’s textile fairs around the world, sustainability is a big focus. A number of events under this focus took place in the fair’s fringe programme, including a half day forum titled How Sustainable Fashion is Reshaping Lifestyles, with a range of innovative companies and prestigious universities participating as speakers.

The Design Talk session featured a series of presentations from leading international designers, including from China, Japan and Europe, to share their design insights. And a new concept this year, titled New Voices of Top Youth Upholstery Designers – Intertextile Upholstery Design and City Roving Exhibition, showcased the work of six groups of young local designers from across China who presented the interior design ideas of their generation through displays and a forum. And reflecting the changes that continue to accelerate in the industry, a number of e-commerce and cross-border trade events took place, including sessions from the likes of JD Home, AliExpress and Tmall.

The 2022 Intertextile Shanghai Home Textiles – Spring Edition will take place from 9 – 11 March, while the Autumn Edition is scheduled for 23 – 25 August 2022.

25.10.2021

TMAS members showcase sustainable finishing technologies

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

At the Sustainable Finishing of Textiles Conference, however, it was said that all of the environmental gains made by such sustainable new fibers can potentially be cancelled out in the further processing they are subjected to – and especially in resource-intensive conventional dyeing, finishing and decoration.

TMAS members Baldwin Technology and Coloreel have both developed solutions to address this issue.

TexCoat G4
During the conference, Baldwin’s VP of Global Business Development Rick Stanford explained that his company’s TexCoat G4 non-contact spray technology significantly reduces water, chemistry and energy consumption in the finishing process. It consistently and uniformly sprays chemistry across a fabric surface and applies it only where needed, on one or both sides.

Instant coloring
Coloreel’s CEO Mattias Nordin outlined the benefits of his company’s technology which enables the high-quality and instant coloring of a textile thread on-demand and can be paired with any existing embroidery machine without modification. This enables unique effects like shades and gradient to be achieved in an embroidery for the first time.

21.10.2021

Talking about Water Conservation with Officina+39

On 21st October the Managing Director of Officina+39 Andrea Venier has joined a panel discussion in the prestigious arena of the Kingpins24 Digital Show. He contributed to the discussion with his and Officina+39’s point of view on “Water Conservation”, together with Emrah Özkorkmaz from Bregla and Taimur Malik from Stylers International, with Edward Hertzman from Sourcing Journal & Rivet as moderator.

Water crisis remains one of the top issues for humanity and 90% of the world's natural disasters are related to water. Officina+39 has been working hard to rethink the way water is used throughout the denim processes: Andrea's contribution emphasized the company’s practical and consolidated experience in this field, as in recent years their main objective has been to drastically reduce water use in line with UN SDG6.

On 21st October the Managing Director of Officina+39 Andrea Venier has joined a panel discussion in the prestigious arena of the Kingpins24 Digital Show. He contributed to the discussion with his and Officina+39’s point of view on “Water Conservation”, together with Emrah Özkorkmaz from Bregla and Taimur Malik from Stylers International, with Edward Hertzman from Sourcing Journal & Rivet as moderator.

Water crisis remains one of the top issues for humanity and 90% of the world's natural disasters are related to water. Officina+39 has been working hard to rethink the way water is used throughout the denim processes: Andrea's contribution emphasized the company’s practical and consolidated experience in this field, as in recent years their main objective has been to drastically reduce water use in line with UN SDG6.

Andrea pointed out how “fashion industry is still currently deeply rooted in a linear approach: make, use, dispose.” Accordingly to Andrea and Officina+39, the fashion world is becoming aware of this reality and is trying to reinvent itself in order to decrease the use of this precious resource and its negative impacts but there is still work to do in order to redesign a better sustainable model, where circularity should represent the new sustainability: circularity not only when it comes to the materials, but also to water.

In the textile industry water is used as the vehicle for colors and chemical auxiliaries but luckily today many technologies aim at significantly reducing water consumption. Officina+39 is really focused on this target: Andrea explained that “Officina+39 has developed the AQUALESS MISSION, a process suitable for conventional machines that leads to a 75% reduction of the water typically used in denim and garment laundry processes, using a waterless technology and saving costs for producers.”

Despite the start-up cost of investing in the development of sustainable technologies may discourage some in the industry, it is about time to realize that these actions cannot be delayed and that we will increasingly hear about water scarcity, water stress and water risk.

Andrea stated: “It is necessary to develop water management strategies and systems in any company: today there is ISO 14000 related to environmental management, but I believe that governments, brands and related organisations should think about an ISO related just to water management. In this way, every company can understand how much value can be generated in the medium-term and how much money could be saved by investing in this kind of technologies. To create new standards related to water management, we must change the approach.”

Source:

Officina+39 / Menabò

(c) Officina+39 / Menabò Group srl
14.10.2021

Officina+39 presents its latest technologies and collaborations

Officina+39, an Italian sustainable chemical developer, attends Superstudio Più in Milan to show its technical progress and share its concrete contribution to a more Trustainable™ denim. Under the spotlight, among multiple innovations, the latest addition to the Officina+39 family: the brand-new NOVASCRAPER INDIGO.

NOVASCRAPER INDIGO, the new technology for classic aesthetics
NOVASCRAPER INDIGO allows to give a natural vintage look to denim garments through laser finishing, an actual innovative alternative to manual scraping. NOVASCRAPER INDIGO guarantees a natural effect with unparalleled quality and accuracy, requiring less manpower and less rejection rate when compared to manual scraping.

Officina+39, an Italian sustainable chemical developer, attends Superstudio Più in Milan to show its technical progress and share its concrete contribution to a more Trustainable™ denim. Under the spotlight, among multiple innovations, the latest addition to the Officina+39 family: the brand-new NOVASCRAPER INDIGO.

NOVASCRAPER INDIGO, the new technology for classic aesthetics
NOVASCRAPER INDIGO allows to give a natural vintage look to denim garments through laser finishing, an actual innovative alternative to manual scraping. NOVASCRAPER INDIGO guarantees a natural effect with unparalleled quality and accuracy, requiring less manpower and less rejection rate when compared to manual scraping.

The Sixth Sense: less water, more Trustainability
Officina+39 and Tejidos Royo joined forces to create a denim line that drastically reduces water consumption: this is “The Sixth Sense”, a project concretely inspired by the 2030 Agenda for Sustainable Development and specifically by its SDG6, calling to action to ensure access to water and sanitation for all. Officina+39 personally accepts this global challenge by contributing to the realization of “The Sixth Sense” with its AQUALESS MISSION. Featuring three cutting-edge laundry products for one innovative process, AQUALESS MISSION combines the application of REMOVER BC, AQUALESS AGED – a waterless compound to give denim abrasion effects –, and OZ-ONE POWDER – an advanced product to give garments a bleached yet eco-friendly treatment in a dry application, for a worn and distressed look. Compatible with conventional washing and treatment machinery, it allows for water consumption savings up to 75%.
Focused on driving sustainability in the textile industry, Tejidos Royo uses low-impact fibers and yarns as a raw material and the implementation of foam-dyeing technology with its Dry Indigo®, the first-ever technology to foam-dye denim with zero water use and no water discharge.

CircularKromia: a colorful path for preloved garments
At Officina+39 the word “waste” becomes synonymous with opportunity, a source to create something new, fostering true, Trustainable™ circularity. This is the background to the collaboration with Atelier Riforma, an innovative startup born in Turin (Italy) with a social vocation. Through the contribution of Officina+39’s RECYCROM™, it has been possible to obtain new pigment and dyestuff pulverizing discarded garments and pieces usually difficult to recover through tailoring transformation alone. The collection made it possible not to generate any waste, no new raw materials were required to create CircularKromia.

The Circle Book 2: the power of collaboration and circularity
A collective project gathering a total of ten companies with common goals focused on transparency and circularity in denim design, The Circle Book is now in its second edition that culminated in CULTURE.IN, a circular capsule collection transparently made from recycled and degradable materials.

Officina+39 opens its doors, with Lenzing and Meidea
In the evening of October 13, the recently inaugurated brand-new headquarters of Officina+39 in Biella opened their doors to welcome denim personalities, brands, designers and partners to show where Officina+39's innovative technologies are created, to network and celebrate while preparing new steps towards the design of a more circular and – of course – Trustainable™ fashion Industry.

Source:

Officina+39 / Menabò Group srl

13.10.2021

Ralph Lauren and Dow release manual for dyeing processes

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Conventional fabric dyeing processes require trillions of liters of water each year, generating roughly 20% of the world’s wastewater.1, 2 Pretreating fabric with ECOFAST™ Pure helps significantly reduce the amount of water, chemicals and energy needed to color cotton, by enabling up to 90% less process chemicals, 50% less water, 50% less dyes and 40% less energy without sacrificing color or quality.3

Ralph Lauren began integrating Color on Demand into its supply chain earlier this year and first launched product utilizing ECOFAST™ Pure as part of the Company’s Team USA collection for the Olympic & Paralympic Games Tokyo 2020. Designed to help address water scarcity and pollution caused by cotton dyeing, Color on Demand is a multi-phased system with a clear ambition to deliver over time the world’s first scalable zero wastewater cotton dyeing system. By 2025, the brand aims to use the Color on Demand platform to dye more than 80% of its solid cotton products.

 

1 Drew, Deborah and Genevieve Yehounme. “The Apparel Industry’s Environmental Impact in 6 Graphics.” World Resources Institute, July 5, 2017. https://www.wri.org/blog/2017/07/apparel-industrys-environmental-impact-6-graphics
2 Rep. A New Textiles Economy: Redesigning Fashion’s Future. Ellen MacArthur Foundation, Circular Fibres Initiative, 2017. https://ellenmacarthurfoundation.org/a-new-textiles-economy
3 A full third-party reviewed and validated life cycle assessment is available by request at www.dow.com/ecofast.

 

Source:

Dow / G&S Business Communications

CHIC Shanghai starts on October 9, 2021 with around 500 brands (c) Chic Shanghai / JANDALI MODE.MEDIEN.MESSEN
28.09.2021

CHIC Shanghai starts on October 9, 2021 with around 500 brands

From the 09-11th of October, CHIC will take place with around 500 fashion and lifestyle brands on 53,000 sqm in the National Exhibition & Convention Center in Shanghai and offers a perfect overview of the fashion innovations in all fashion areas of the next season.

Chinese consumers place increasing value on sustainable products, the topic of "sustainability" is present in all areas of CHIC, in cooperation with WGSN the latest trends in sustainable fashion S / S 22 are shown. Together with China Fashion and WWD, companies that produce particularly sustainably are honored as part of the "Pursuer of excellence in sustainability" event.

The organizers put a special focus on the expansion of digital tools for the trade fair participants, which were used in the run-up to the trade fair for intensive visitor marketing and at the trade fair to optimally network supply and demand, WeChat plays a central role here. The CHIC WeChat mini program has been expanded and integrates the CHIC e-catalog, tailored to the needs of exhibitors and visitors.

From the 09-11th of October, CHIC will take place with around 500 fashion and lifestyle brands on 53,000 sqm in the National Exhibition & Convention Center in Shanghai and offers a perfect overview of the fashion innovations in all fashion areas of the next season.

Chinese consumers place increasing value on sustainable products, the topic of "sustainability" is present in all areas of CHIC, in cooperation with WGSN the latest trends in sustainable fashion S / S 22 are shown. Together with China Fashion and WWD, companies that produce particularly sustainably are honored as part of the "Pursuer of excellence in sustainability" event.

The organizers put a special focus on the expansion of digital tools for the trade fair participants, which were used in the run-up to the trade fair for intensive visitor marketing and at the trade fair to optimally network supply and demand, WeChat plays a central role here. The CHIC WeChat mini program has been expanded and integrates the CHIC e-catalog, tailored to the needs of exhibitors and visitors.

The next editions of CHIC will take place from 3-5th of November 2021 in Shenzhen and from 9-11th of March 2022 in Shanghai.

Source:

JANDALI MODE.MEDIEN.MESSEN