From the Sector

Albstadt-based circular knitting machine manufacturer Mayer & Cie. (MCT) is exhibiting at this year’s leading textile and garment technology trade fair ITMA with the slogan “Stay a winner. With Mayer & Cie.” The focus of the company’s presentation will be on sport. Sportswear, active leisurewear and sports shoes are increasingly made of circular knitted fabrics and the long-established German firm has the right machines to cater for this trend. Mayer & Cie. is also going for the improved customer experiences that consistent digitization makes possible.

For years global demand for circular knitted goods has increased continuously. An important growth driver is the sportswear and sports fashion sector, including sports shoes. According to Euromonitor the market segment grew by about seven per cent per year between 2013 and 2017. By 2017 Euromonitor estimated its total market value to be around USD 78 billion. Lightweight synthetic fibres, new patterns and attractive functionalities are the key requirements in this area.

Mayer & Cie. can already fulfil many requirements with a portfolio of machines considered to be the largest in the industry. Lightweight mesh structures, often requested for running shirts, are a speciality of the IG 3.2 QCe interlock machine, for example. Jacquard machines from the OVJA family, in contrast, are suitable for the manufacture of shoe uppers. Compared with the conventional methods flat knitting and warp knitting, circular knitting scores points for productivity and significantly shorter set-up times.

Series production of the Spinit 3.0 E spinning and knitting machine has been under way since the end of 2018. It combines two previously separate processes – spinning and knitting – in one machine. That saves time, space and energy compared with conventional manufacturing processes. Mayer & Cie. has already won several awards for this approach, the latest being the Innovation Prize for the Climate and the Environment (IKU) that the Federal Environment Ministry and the Confederation of German Industry (BDI) award every other year. The company is presenting at ITMA its further developments of this machine.

Along with machine development Mayer & Cie. has set itself another target for ITMA and thereafter: to improve the customer experience, a task of which Sebastian Mayer is in charge. His responsibilities at Mayer & Cie. are for corporate development and digitization. Digitization of the company’s extensive customer and machinery know-how is currently under way. Customers will be able to see and test the initial results at ITMA. Available for testing will be the new Web shop, linked with an analogue model of the high-bay warehouse in Albstadt-Tailfingen, and machine maintenance by means of HoloLens.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

For this 2019 edition, JEC World organizes for building, automotive and aerospace professionals a full program of conferences, round tables, dedicated showcases… to present trends & innovations where composites are at the heart of the challenges to come, the new mobility challenges.

JEC WORLD 2019 CONSTRUCTION PROGRAM:

• 1 technical conference  
• +30 innovative parts within Building and Energy planet
• Composites exchange workshop
• 3 Finalists for Innovation Awards
• Pre-arranged Business meetings
• Construction Composites Circle

Please find here more information about JEC World 2019 Construction program.

JEC WORLD 2019 AUTOMOTIVE PROGRAM:

• 1 technical conference  
• +50 innovative parts within Auto&Transport Planet
• Composites exchange workshops
• 6 Finalists for the Innovation Awards
• Pre-arranged Business meetings
• Automotive Composites Circle

Please find here more information about JEC World 2019 Automotive program.

JEC WORLD 2019 AEROSPACE PROGRAM:

• 1 technical conference  
• +50 innovative parts within Aero&Space planet
• Composites exchange workshop
• 6 Finalists for Innovation Awards
• Pre-arranged Business meetings
• Aerospace Composites Circle

Please find here more information about JEC World 2019 Aerospace program.

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

• +230 companies
• 45 speakers
• +7,000 professional visits
• 49 countries represented
• 12 JEC Innovation Awards
• +450 Business meetings
• 3 Composites Tours
• Top 3 visitors’ countries: Korea - China - Japan

Gauging from the attendance of more than 7,000 professional visits from 49 countries, Eric PIERREJEAN, CEO of JEC Group, has already announced during the opening ceremony that JEC Asia 2019 will return next year on November 13, 14, 15, 2019. This ceremony was attended by industrialists, academics and officials, reflecting the huge interest that composite materials generates. Thus, at this ceremony we could notice the participation of Mr. BANG Yun Hyuk, President of KCTECH, Mr. Song, Ha Jin Jeonbuk Provincial Governor, Mr. HAN Byung Do, Senior secretary to the South Korean President for political affairs, Mr. CHOI Jin Hyuk, Director at MOTIE, Mr. KIM Yang Won, Vice Mayor of Jeonju, demonstrating the whole support of the Korean community; and Mr. Fabien PENONE, French Ambassador, was also present to underline the strong links and industrial interactions between Korea and France.

Hosting, this year again, the International Carbon Festival organized by KCTECH and the Jeonju region, JEC Asia also provided a comprehensive program dedicated to the Automotive professionals with a leadership circle attended by top stakeholders of the industry worldwide, top-notch conferences on automotive automated processes and composite applications for structural parts with speakers from Hyundai Motor Group, e-Xstream Engineering, L&L Products, Cobra International, Hanwha Advanced Materials, Daimler, Hankuk Carbon, Arkema, Cetim, Saertex & Co. KG to name a few.

“Aeronautics: 53% and beyond” conferences took place and attracted many attendees to discover new composites solutions and their wider use in this sector with Stratasys,IS Group, Cevotec… JEC Asia also offered its participants a chance to find out new business opportunities, highlighting the most relevant for the region and various application sectors.
All in all, the show floor was filled with innovations as JEC Asia 2018 showcased innovative parts and awarded 12 composites International champions among which 3 were about automotive, at the JEC Innovation Awards ceremony.

Also, to be noted at JEC Asia was the focus on networking with pre-arranged Business meetings that generated +450 qualified one-to-ones over the 3 days. Likewise, 3 composites tours opened exclusive doors to attendees when they visited Hanyang University, the composite architecture of the House of Dior, LG Hausys & Kolon and a day trip in Jeonju region and the Carbon Valley of the KCTECH.
For the first time, JEC Asia teamed up with MAI Carbon to offer a brand-new Student Program that keeps abreast of composite-industry needs to hire young, committed well-trained engineers. The two-part program included workshops with a focus on theoretical foundations and a guided tour through the JEC Asia trade show and the innovation planet.

Twelve companies from eight different countries will receive a JEC Innovation Award at JEC Asia 2018. Asia-Pacific is an innovative region that sets the tone for all other regions of the globe. Once again, the JEC Innovation Awards highlight how composites bring solutions considering the new challenges in terms of efficiency, sustainability and life-cycle analysis.

This year, JEC Group awards innovations in the following categories: aerospace (structural and tooling), automotive, commercial vehicles, e-mobility, marine, railway, sports & leisure, infrastructure & civil engineering, industrial equipment, sustainability and additive manufacturing.

The ceremony will take place on Thursday November 15, 2018 at the COEX Center of Seoul (South Korea). Ida DAUSSY (Seo Hye-na), will host the ceremony in front of officials, manufacturers, scientists and composites professionals.

Category: AEROSPACE – STRUCTURAL
Winner: CSIR National Aerospace Laboratories (India)

Most of the composite structures for aircraft are made of carbon-epoxy composites, which can withstand a maximum service temperature of 130°C. As a consequence, carbon-epoxy materials cannot be used in hot zones like engine vicinity areas. The Aeronautical Development Agency (ADA) and CSIR-NAL took up the challenge of developing high temperature resistant composites for use in hot zones of light combat aircraft, which would result in significant weight and cost savings, as well as a considerable reduction in the meantime between failures (MTBF) due to thermal ageing.

The first task was to choose a material system with a service temperature of about ~ 200°C. During the material selection process, it was found that BMI resins are a relatively young class of thermosetting polymers. Hence, a carbon-BMI prepreg was selected due to a number of unique features including excellent physical property retention at elevated temperatures and in wet environments.

It was realized that weight savings and performance can be maximized using co-curing technology. This results in a large reduction of fabrication cycle times, costs and weight. Co-cured structures have fewer fasteners, which results in shorter assembly cycle times and also reduces sealing issues.

A prototype engine bay door assembly was built and tested at 180°C for flight certification. The engine bay door consists of an inner skin and co-cured outer skin assembly with eight transverse stiffeners. The stiffeners were designed with ‘J’ sections. The door size was 1.5 m length, 1 m width and 0.4 m overall depth. The co-cured door was developed using autoclave moulding. Two doors were installed in prototype aircraft and successfully flown.

The fourth edition of the ICNF - International Conference on Natural Fibers – Smart Sustainable Solutions will be taking place from 1-3 July 2019 in Porto, Portugal, is accepting extended abstracts of two full pages until 31st January 2019.
The Conference, focused on the latest scientific and technical advances in natural fibers will bring together more than 300 participants from universities, research and technological centers and companies.

Program topics
Following up the success of ICNF2017 held in Braga, Portugal, focusing on the topic ‘Advanced Materials for a Greener World’, next year’s ICNF is devoted to the topic ‘Smart Sustainable Solutions’.
The conference topics include:

•    New processes for natural fiber agriculture extraction and processing;
•    Natural fiber reinforced biopolymers;
•    Innovative natural fibers & structures;
•    Functional natural fibers;
•    Natural fiber modification techniques;
•    Advanced fibrous structures based on natural fibers;
•    Nanodimensional natural fibers;
•    Natural fiber based polymeric composites;
•    Green composites;
•    Natural fiber based cementitious composites;
•    Applications of natural fibers in high end sectors;
•    Analytics, modeling and prediction of properties and behavior;
•    Biomimetics;
•    Product development based on natural fibers;
•    Markets for natural fibers;
•    Sustainability of natural fibers: life cycle assessment studies;
•    Textile processing of natural fibers;
•    Properties & characterization of natural fibers & structures.

Natural Fibrenamics Award 2019
After the success of last editions, the Natural Fibrenamics Award is again included in the ICNF2019 program to award the best innovative products in the field of natural fibers. The innovative product applications will be shown during the Conference in a special showroom and evaluated by a selected jury in terms of innovation, design and functionality. The contest intends to be a showcase of the latest innovations in the field of natural fibers, both for the scientific and industrial communities.

The online abstract submission is open until January 31, 2019 at the official ICNF2019 website: www.icnf2019.fibrenamics.com

• Back to Seoul: JEC Asia gathers the composites industry in Korea for its 11th edition
• JEC Asia, November 14-16, 2018 – COEX Center, Seoul, South Korea

Paris - After the record-breaking figures of the 2017 edition, that marked the move of JEC Asia from Singapore to Seoul, the event is returning to the capital city of the Republic of Korea with a strong program, not only on the exhibition floor, but also in the conference sessions and all services at the disposal of every attendee.

“We are very grateful for the support of the industry, government bodies, and academics, regarding the evolution of JEC Asia, that has led to the success of the platform. Indeed, 90% of the show floor is already booked which bodes well for the preparation of the event.” Commented Christian STRASSBURGER, Events Director Asia for JEC Group.

“On top of that, the event is truly international, as 45% of the exhibitors are coming from outside Asia. JEC Asia will welcome pavilions from Germany, France, Italy, Japan, China and Singapore, as well as the major composite clusters in Korea.” He added.

FOCUS ON THE AUTOMOTIVE INDUSTRY

The future of mobility is a hot topic for composite materials and JEC Asia will represent, promote and provide information about the increasing integration of composites in automotive developments.
Numerous programs will be offered, such as a whole day conference on Composites in Automotive, a Leadership Composites Circle, an Auto Planet, showcasing parts, a B2B meetings program, a JEC Innovation´Award category and Composites tours (site visits of composite-related facilities).

Finally, for the second time, JEC Asia will host the International Carbon Festival, organized by KCTECH and the Jeonju region, with top-notch conferences and international speakers.

Key Figures 2017

• +230 companies
• 6,271 professional visits
• 43 speakers
• 42 countries represented
• 12 JEC Innovation Awards
• 400 B2B meetings
• 2 Composites Tour

• Special display arena will showcase exquisite signature collections from interior décor and home textile sectors

India’s premium fairs for home textiles, homeware and interior décor, Heimtextil India and Ambiente India have launched Bespoke Living, an exclusive product showcase space dedicated to companies dealing with signature collections at Pragati Maidan, New Delhi from 27th – 29th June 2018.

With four successful editions in a row, Heimtextil India and Ambiente India also slated on the same dates, have become the country’s leading business trade fairs to showcase the finest quality of dining, living, giving and home textiles. The launch of Bespoke Living aims to highlight one of a kind brands who deal with uniquely crafted designs that will range from plush statement pieces to extensive signature collections for home and retail furnishing.

The term luxury décor is not restricted to brand names anymore. With trends like fully furnished luxury houses, theme dominated homes and tastefully designed retail showrooms rapidly picking up in the country, consumers are open to different styles and unique designs.
Be it the very popular Scandinavian themed houses to colourful cultural artefacts creating a soothing aura, Indians now want their homes and businesses to reflect their personal style with statement interiors.

Halls dedicated to Bespoke Living will feature selected designer brands from India and around the world showcasing their premium collections. This product showcase arena will be beneficial for interior designers, architects, hotel buyers, buyers of luxury goods and luxury homes developers. Business visitors can gain knowledge about the upcoming trends, source timeless pieces, build new connections with people sharing the same interest and experience the quality of the products in person. Exposure to best in class products and latest trends presented here will help them create a better home design experience for their clients.

Excelling in statement leather pieces the brand Three Sixty will showcase their latest leather collection that comprises of rugged travel accessories and signature furniture pieces. Inspired by the world’s deserts and explorers who traversed them, the brand designs fully customisable handmade products which are available in beautiful shades of tan, sure to up the sophistication quotient of home and retail interiors.     
        
“Our latest collection at Bespoke Living will showcase our ever evolving tastes and designs. We believe luxury need not be synonymous with breaking open the bank. Traditional Indian craftsmen can craft the most beautiful signature pieces and provide quality beyond compare, shared Mr Vikash Gupta, CEO, Three Sixty. International exhibitors present at the show will showcase exquisite artefacts like decorative ceramics with glaze, handmade clay wreaths with metal leaves, ceramic vases and other decorative items to make every home unique.

Apart from this specially curated design platform, Heimtextil India and Ambiente India 2018 will host the Interior Lifestyle Awards that will bring creative masters from the interior decor and home textile sectors together by recognising their art and giving them an international platform to showcase their designs.
The trade fair will also organise the Hospitality Day, a hospitality and retail procurement programme that will bring top class purchase managers from the industry to build new contacts and source quality products. Together, Heimtextil India and Ambiente India together will host over 100 companies from countries like India, Indonesia, Switzerland and Thailand showcasing trendsetting designs in the interior décor and home textile industry.

• JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.

On March 6-8, 2018, Paris will host the largest international trade show for advanced materials: JEC World, which is organized by JEC Group. For three days, more than 43,000 professional visits from some 100+ countries will gather at the world’s most innovative platform for the materials and products that are revolutionizing our century. “One field where France is a global leader is the field of composites!” says JEC Group President and CEO Frédérique MUTEL.

COMPOSITES ARE GOING STRONG
The share of composites in the global economy is growing. The market for these products is worth 83 billion euros, for a volume of 11.23 million metric tons of volume (2017 statistics). Analysts are predicting a steady 5% growth by 2021. From the industrial viewpoint, composites are developing rapidly, with new automated processes for high-volume production.

INNOVATION IN COMPOSITES
“Innovation is there with the raw materials, such as better-formulated resins (and even recyclable ones like thermoplastics) and higher-performance fibers like carbon, glass and aramid. Moreover, natural materials like starch for matrices and flax, hemp, sisal and bamboo for fibers are being introduced. There is also innovation in the ways composites are being used, and with the creation of completely new things like drones, electronic devices, hydrofoils and flying taxis. Composites are currently making progress everywhere there is a need for low weight and performance. They offer nearly infinite possibilities. These are truly the materials of the century. Designers are adopting them in a broad range of fields like smart cities, infrastructure, networks, transportation, medical devices, sports & leisure and design. Composites materials expand the field of possibilities.” explains Ms. MUTEL.

“MAKE IT REAL” AT THE 2018 JEC WORLD TRADE SHOW
To present the latest trends and innovations, the 2018 JEC World has even more surface area, with 68,000 square meters. The 1,350 exhibitors (from carbon fiber producer to auto builder, from designer to decorator, from research fellow to aircraft manufacturer) will display their latest advances. All stakeholders will be present at the show. JEC World received more than 40,000 professional visits last year, and is expecting 43,000 this year!

THE NEW “MUST” THINGS TO SEE
This year, JEC World will have four planets. Besides the aerospace, automotive and construction planets, there will be a new “Make it real” planet, which gives a preview of designer creations to be exhibited at the Ghent museum starting in October 2018. “We will show the many aspects of composites, and how these materials are being gradually incorporated into everyday objects,” adds Ms. MUTEL.
This year’s JEC World will feature a new “Composite Challenge” program that gives the floor to ten PhD students, who will be given five minutes to pitch their research projects with the help of a single slide. “True to its mission, the JEC Group has set up this new program to share the latest research on composites. But it is not just a way to share the most advanced knowledge, it also helps to bridge the gap between academics and the industry and to identify the industry’s next generation of leaders,” she says.
JEC World will also be the occasion to launch Flax & Hemp Fiber Composites, A Market Reality: The Biobased Solution for the Industry, a new book published by JEC Group on the use of plant-based materials.

KNOWLEDGE & NETWORKING PROGRAMS SUPPORTED BY JEC GROUP
The trade show will host well-known speakers, including Dirk AHLBORN, the CEO of Hyperloop Transportation Technologies, a company that is reinventing transportation with high-speed travel (up to 1,300 km/h, or 808 mph), and Yves ROSSY, aircraft pilot and inventor of the first jet-powered wingpack, with which he is able to reach speeds of up to 300 km/h, or 186 mph. The Startup Booster program will pay tribute to startups, and the JEC Innovation Awards program, to innovations. For the first time, the public will be invited to vote on these two programs!
Six new conferences will also address the latest technical advances that are moving the sector forward, and a Composites in Action program will present live demonstrations throughout the show, in three different places.