From the Sector

Sateri has scored ‘A-‘ in CDP (formerly Carbon Disclosure Project) for Climate Change in 2019, placing it at Leadership band and the top 27% of companies in its sector, for implementing current best practices. And making Sateri World’s First Viscose Producer to Reach Leadership Band

This is the first time Sateri has participated in this annual voluntary reporting. It is also the first time that a viscose producer has reached Leadership band. Sateri attained an ‘A’ for more than half of the 11 categories that it was assessed for, including value chain engagement, Scope 1,2,3 emissions, and governance. Its ‘A-‘ overall score is higher than the ‘C’ average globally, in Asia, and in the Textiles and Fabric Goods sector; no companies in the same sector scored ‘A’.

Allen Zhang, President of Sateri, said, “We are very pleased to achieve such a commendable score on our first attempt at CDP reporting. It is a validation of our efforts and actions to combat climate change and our contribution towards decarbonising the textile industry. The CDP platform not only helps us measure and benchmark our sustainability performance against more than 8,400 companies globally, but also serves as a management tool for continuous improvement.”

Sateri has made great strides in the last year on emission reduction work. In June 2019, Sateri and the China National Textile and Apparel Council (CNTAC) jointly launched the EcoCosy® Climate Leadership Programme. The programme invites Sateri’s value chain partners to participate in the Climate Stewardship 2030 Initiative to set a decarbonisation pathway for the fashion industry to reduce the industry’s GHG emissions by 30% by 2030. Results of the first phase of the programme were published in the EcoCosy® Climate Leadership Whitepaper 2020, which was shared at COP25 in Madrid last year.

Paris Companies Inc. recently achieved Clean Green re-certification. This re-certification reflects their continued dedication to operational efficiency and sustainability.

Paris Companies Inc. first earned the Clean Green Certification in 2012. Companies that have earned this certification adhere to TRSA-designated water and energy use thresholds and deploy best management practices (BMPs) consistent with the ASTM International environmental laundering standard. Paris Companies’ customers can be assured their uniforms, towels and other reusable linens are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:

• Recovering heat from drained hot water and heat dispersed from the process of warming water
• Recapturing drained water from rinses for reuse
• Using environmentally friendly detergents
• Removing solids and liquids from wastewater
• Solar energy and energy-efficient lighting
• Recycling programs
• Re-routing trucks to save vehicle fuel
• Spill prevention plans

The Clean Green certification is valid for three years at a time. TRSA inspects laundry facilities seeking certification and approves documentation of their water and energy use and BMP deployment through production reports they submit to auditors during the inspections. TRSA’s certification management protocol includes auditor training by the association’s inspection program administrator.

Following an in-depth analysis of the current business situation conducted by the new Group Management, Autoneum expects a net loss in the high double-digit million range for the full year 2019 due to the situation in North America and related one-time charges from impairments. Therefore, achieving the communicated mid-term targets will take more time.

A comprehensive assessment by the new Group Management focusing on Business Group North America and taking into account the course of business from January to November 2019 led to a revaluation of the situation. It has become apparent that the problems in North America are not limited to two US plants and deficient ramp-ups there. Accordingly, a comprehensive turnaround program focusing on operational excellence and the improvement of cost structures is being developed and implemented in Business Group North America.

As a result of the slowdown in the automotive industry and the continuing low market level forecasted in the medium term, the cost structure at the Group’s headquarters in Winterthur, Switzerland, has been adjusted, among other things, by selective staff reduction. To further reinforce new mobility activities, they will be concentrated at the Research and Technology Center in Winterthur. This will include the relocation of the Competence Center New Mobility from Sunnyvale (CA), USA, to Winterthur.

Due to the continuing losses of Business Group North America, Autoneum expects a net loss for the financial year 2019 in the high double-digit million range. In addition to current operating losses, this also includes one-time charges from impairments which are not cash-effective. To achieve the Group’s mid-term targets announced in March (“2019 Year of tidying, 2020 Year of transition, 2021 Return to sound profitability level), an additional year will therefore be needed.

• Porcher Industries presents the future of quiet and clean mobility solutions with materials that offer high-performance thermal and acoustical insulation.

The 5th Edition of the Annual Automotive Exhaust Systems Summit, to be held in Dusseldorf on November 28th-29th, will see Porcher Industries showcase the market’s most complete range of high performance thermal and acoustical insulation products.

With a key strategic thrust targeting quiet and clean mobility by developing new insulation applications, Porcher Industries’ range of textiles meet the demands and requirements of the Automotive, Aerospace and other transport sectors by delivering unsurpassed levels of thermal and acoustical management.

On display the group will showcase its Techmat®, SilcoSoft® and ThermoShield® materials – all highly functional non-woven textiles that can be found in key areas of both the hot and cold ends of vehicle exhaust systems.

Produced from 100% non-respirable fibres, these binder free non-wovens are safe to handle and can be tailored to provide application specific thermal insulation and heat shields at temperatures ranging from 650˚C to 1150˚C (1200°F to 2100°F).

Porcher Industries is able to deliver its Techmat®, SilcoSoft® and ThermoShield® materials in a wide range of formats from roll goods, flat or formed shapes through to sub-assemblies and finished parts that combine metallic layers with their insulation materials.

Porcher Industries’ thermal and acoustical insulation solutions will also be on show in Dusseldorf: technical textiles that blend chemistry and fibre processing technology to produce a powerful range of non-woven and glass mat thermoplastics (GMT) materials that can be tailored to a customer’s specific acoustical and thermal insulation requirements.

In addition, Andreas Stoeferle, Technical Support Engineer, EMEA, Porcher Industries, will present a detailed view of the group’s expertise in high performance insulations, their global reach, products and delivery formats on the opening day of the conference.

“As one of the leading manufacturers of specialist technical textiles within the Automotive sector, we have responded to demand and placed significant development time and resource into developing our range of thermal and acoustical material solutions for Automotive and Aerospace.” commented Pierre-Yves Quéfélec, Global Aerospace & Automotive BU Head.

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation is pleased to invite you to meet us at DyStar’s Booth H11 of Hall C1, Performance Days at Munich from 13 to 14 November.

Bernhard Knoche, Global Head of Brand & Retailer Management said, “This is our second time at the event, and we are elated to have five of our new developments chosen by the Jury of PERFORMANCE FORUM to be displayed on the Wall Special. Learn and find out how DyStar’s products can help you shape a more sustainable manufacturing journey with us.”

Manufacturers, Brands and Retailers will see intangible benefits from the five winning concepts featured on the Wall Special, namely DyStar CADIRA® Reactive, DYCON® HF on TENOWA® 1, DYCON HF on TENOWA 12, DYCON HF on TEXLENE®, DYCON HF on CERAMICA® GREEN.

DyStar’s Cadira Reactive is a resource saving module which was first launched in 2016. The Cadira concept supports in reduction of water, waste, and energy consumption. And as another sustainable solution offering the DYCON HF series, being the most cost efficient and resource saving continuous process for cellulosics and blends with PES, PA and PU fibres.

The two-day trade fair for the functional fabrics industry highlights a wide range of solutions for Manufacturers, Brands and Retailers globally. At DyStar’s booth, we welcome you to discuss opportunities for collaborations that will help to make the industry cleaner.

• Group sales increases by approximately 6 percent compared to the prior year period to 832 million euros due to organic growth in the market segments Digitization, Energy and Chemicals
• Group recurring EBIT at around 54 million euros; adjusted for a positive one-time effect in the prior year approximately on the comparable level of the prior year
• Business unit Composites – Fibers & Materials (CFM) deteriorated substantially in the third quarter 2019 due to the weak development in the market segments Textile Fibers, Wind Energy and Industrial Applications; Graphite Materials & Systems (GMS) developed better than expected on the very good level of the prior quarter reaching overall a record high level in 9M/2019
• Free cash flow from continuing operations improved significantly in the first nine months
• Impairment testing triggers a non-cash impairment charge of approximately 75 million euros in CFM in the third quarter
• Revised guidance of October 25, 2019: Recurring EBIT at CFM in a negative mid-to-high single digit million euros amount and on Group level at 45 to 50 million euros
• Countermeasures initiated to improve earnings of CFM
• Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: ”The structural growth drivers remain intact in our strategically relevant markets. The countermeasures to improve earnings of CFM will be implemented consistently.”

In the third quarter 2019, the business units of SGL Carbon developed very differently. While Graphite Materials & Systems (GMS) showed better than expected results, Composites – Fibers & Materials (CFM) deteriorated compared to the two previous quarters. This is attributable to the weaker development in the market segments Textile Fibers and Industrial Applications. In total, sales revenue in the first nine months 2019 grew by approximately 6 percent to reach 832 million euros. Recurring Group EBIT after nine months reached approximately 54 million euros. Adjusted for a positive one-time effect in the prior year, this was comparable to the prior year level.

In its ad-hoc notification of October 25, 2019, the company revised its guidance for recurring EBIT of CFM downwards to a negative mid to high single digit million euro amount. On the Group level the company now expects a recurring EBIT at 45 to 50 million euros. Due to the lower starting point in 2019 as well as the ongoing weakness in the market segments Textile Fibers and Industrial Applications in the business unit CFM a non-cash impairment charge in the amount of approximately 75 million euros was recorded in the third quarter 2019. In recent years acquired assets of the former joint ventures with BMW and Benteler were not affected by this impairment. In addition, the impairment charge of CFM led to a valuation allowance on deferred tax assets in the amount of 7.4 million euros. Against this background, SGL Carbon now expects a net result of approximately minus 100 million euros for fiscal year 2019.

Novibra presents the latest innovations in spindle technology and energy saving measures at the forthcoming ShanghaiTex.
The energy saving spindle LENA has been designed for the highest speeds and lower energy consumption. It is the only spindle in the market with 17.5 mm wharve diameter and energy savings in the average of up to 6%.

The new generation of clamping crowns CROCOdoff and CROCOdoff Forte introduce genuine doffing without underwinding. The crowns work automatically depending on the spindle speed. The major advantages are significant reductions in maintenance costs. That is based on a lower ends down rate after doffing and minimized cleaning of the underwinding area.

Novibra’s goal is to bring beneficial and customized solutions to the customers helping them to keep their leading position in the market. Novibra is looking forward to discussing the new products that fulfil one of today’s biggest demands for energy savings and maintenance costs reduction.

Bräcker presents a new traveller with up to 50% longer lifetime and shorter running-in period. This is only one highlight out of the impressing product variety.
A novelty Bräcker shows at ShanghaiTex is the new CARBO traveller for ring spinning machines. It is specially designed for man-made fiber spinners. CARBO is a new coating technology which improves the sliding properties. This results in up to 50% longer lifetime and a shorter running-in period. Recommended applications next to man-made fibers are also their blends, core yarns and all yarn counts.

In addition, Bräcker exhibits its well-known portfolio of high-quality products which meets the continually rising demands on the textile market like higher speeds and productivity. The rings and travellers offer long service lives, lowest yarn breaks and no thermal damages when processing man-made fibers.

At ShanghaiTex SSM presents solutions for precision package winding and high package consistency and provides a wide range of renowned textile machines.

SSM enables yarn dyers to be successful – with the precision package winder PWX. Only a quick response to market trends in combination with high cost-efficiency enables customers to be competitive. The winder offers clear benefits to dye package winding and rewinding of filament and staple fiber yarns, with or without lubrication.

For the XENO-platform SSM presents the first and only self-regulating backpressure system in the world: preciforce™ for a guaranteed package consistency. Furthermore, the next generation of the blade winding powerblade™ will be introduced for the XENO-platform.

• Bangladesh’s biggest denim expo takes place 5-6 November
• The show runs concurrently with the Sustainable Apparel Forum Bangladesh
• From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

H&M Group is collaborating with Bangladesh Denim Expo for the forthcoming 11th edition of the event and a number of guest speakers will be present from the company, including Pierre Borjesson, head of sustainability, global production. Other guest speakers include Andrew Olah, the founder of Kingpins Denim show, Alice Tonello, R&D director with the Tonello Group, world renowned denim designer, Piero Turk and Jordi Juani, Asia regional director with Jeanologia.

Through a series of product displays, presentations, seminar sessions & panel discussions, the Expo will encourage healthy debate and interaction among exhibitors and visitors to champion a more responsible denim industry. One of these, of course, is sustainability and within this sits the issue of responsibility – an overriding theme of this year’s event. Denim manufacture faces huge challenges with regards its social and environmental responsibility, with production techniques having potentially far-reaching ramifications for the environment as well as people involved in the production process.

However, the industry and its supply chain are making impressive progress on these issues with Bangladesh – now the world’s largest producer of denim – leading the way in terms of addressing some of the sustainability challenges relating to denim production, including excessive use of water and chemicals. Mostafiz Uddin is the organiser of Bangladesh Denim Expo. Uddin has watched with interest the evolution of the denim industry, with each Expo marking continued and gradual progress being made by the more progressive players in the industry.

Uddin says: “The way that business and product development is conducted can have far reaching consequences on the environment, on the people that make the product and the product’s end use & life-span. “It is the duty of all stakeholders in the apparel industry to acknowledge this responsibility and to analyse our business practices, for the benefit of all.” Emphasising the theme of responsibility within Denim Expo is the fact that revenues from the expo support the running and presentation of the Sustainable Apparel Forum.

Sustainable Apparel Forum

The Sustainable Apparel Forum (SAF) is the biggest annual sustainable apparel event in Bangladesh. Bangladesh Apparel Exchange (BAE) along with Bangladesh Garment Manufacturers and Exporters Association (BGMEA) as co-organiser will jointly carry out the 2nd edition of the SAF on 5th Nov 2019.

This is the second edition of the Sustainable Apparel Forum, with the first-ever forum held in 2017 in Dhaka. The objective of this year’s forum is accelerating the momentum of sustainability in Bangladesh apparel industry.

The forum will see more than 50 speakers gathered from Bangladesh and overseas sharing expert opinions across five panel discussions covering current issues in the country’s apparel industry. These include human resources, transparency in business, water conservation, purchasing practices, sustainable chemical management, waste management, circular economy in textiles and climate change to name a few.

Additionally, the conference will host several knowledge building technical presentations from renowned organisations which will cover different issues relating to sustainability, including waste management, protection of the environment and better working conditions.

Speakers at the show include Md. Shahriar Alam, MP, Honourable State Minister, Ministry of Foreign Affairs, Bangladesh, H. E. Benoit Préfonatine High Commissioner, High Commission of Canada, Bangladesh, and Dr. Rubana Huq President, Bangladesh Garment Manufacturers’ and Exporters’ Association, Sheikh Fazle Fahim, President, Federation of Bangladesh Chamber of Commerce & Industries, Pierre Börjesson, Head of Sustainability – Global Production, H&M Group, Tuomo Poutiainen, Country Director, International Labor Organization, Peter McCallister, Executive Director, Ethical Trading Initiative and H.E. Winnie Estrup Petersen Ambassador, Embassy of Denmark, Bangladesh.

Prior to this year’s conference, the Embassy of the Kingdom of the Netherlands in Bangladesh and the Sweden Embassy in Bangladesh will also co-host two roundtable discussion in collaboration with BAE and in association with BGMEA on 4 November, 2019, while H&M, Better Work Bangladesh and C&A Foundation are partners in the event.
The conference will be followed by showcasing different innovative, sustainable & best work practices in RMG manufacturing factories in Bangladesh. Following the discussions, a series of recommendations will be made, and a Sustainability Roadmap for the Bangladesh apparel industry will be formulated.

This year’s SAF promises to be the biggest yet. Added by Mr Mostafiz Uddin in the recent press briefing for the event: “The title for this year’s Sustainable Apparel Forum is enabling sustainability through policy and leadership. The time for talking on sustainability issues is over. It is now time for actions. That’s why the focus of this year’s show is on practical, pragmatic actions the textile industry can adopt to improve its environmental footprint.”