From the Sector

Reset
489 results
CHT USA celebrates expansion of its headquarters in Michigan (c) CHT Group
03.11.2023

CHT USA celebrates expansion of its headquarters in Michigan

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

For the Cass County site, the approximately 45,000 square feet new facility with 5 reactors and distillation units resulted in an increase in the total area of the company's site to 120,000 square feet. This will then allow sufficient space for additional reactors and downstream processes. The CHT USA site expansion has created approximately 30 highly skilled jobs in the community.

CHT USA’s Regional Sales and Marketing Director NORAM, Matthew Loman hosted the Ribbon Cutting ceremony.

More information:
CHT Group USA silicone
Source:

CHT Group

03.11.2023

Solvay announces Board of Directors for standalone SYENSQO

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

The following individuals will serve on the SYENSQO Board of Directors:
Rosemary Thorne will serve as independent Director and Chair of the SYENSQO Board, as well as Chair of the Board’s Finance Committee. She is currently an Independent Director on the Solvay Board of Directors, appointed in 2014, and Chair of the Board’s Audit Committee. She is also an Independent Director on the Board of Merrill Lynch International (UK), a wholly-owned subsidiary of Bank of America, serving as Chair of the Audit Committee. Ms. Thorne has decades of financial leadership experience across a wide range of industries. She previously served as Chief Financial Officer at J. Sainsbury, the UK’s largest supermarket chain at the time; Bradford & Bingley; and Ladbrokes. Ms. Thorne previously sat as an Independent Director on the Boards of Royal Mail Group, Cadbury Schweppes, Santander UK, First Global Trust Bank and Smurfit Kappa Group.

Dr. Ilham Kadri will serve as Chief Executive Officer and member of the Board of Directors of SYENSQO. She is currently CEO and President of the Executive Committee at Solvay. Ms. Kadri has successfully led the turnaround of Solvay, delivering double-digit EBITDA growth and 18 consecutive quarters of positive free cash flow, deleveraging the balance sheet and promoting superior people engagement. She is an independent Board member at A.O. Smith and L’Oréal. She is active in non-profit organizations, as Chair of the World Business Council for Sustainable Development (WBCSD), member of the steering committee of the European Round Table of Industrialists (ERT) as well as a permanent member of the World Economic Forum’s International Business Council (WEF). Ms. Kadri has extensive leadership experience across a variety of industries in four continents and with leading industrial multinationals, including Shell, UCB, Huntsman, Dow, Sealed Air. Prior to Solvay, she was CEO and President of Diversey in the USA, led the company’s return to profitability and resulting spin off and divestiture to Bain Capital. She founded two non-Profit foundations: the Solvay Solidarity Fund in Belgium in 2020 which supported more than 7000 families affected by Covid-19 and natural disasters; and founded the ISSA Hygieia Network in 2015 in the USA, to help women in the cleaning industry. She received two Doctor Honoris Clausa from EWHA University in Korea and Université de Namur in Belgium.

Julian Waldron will serve as independent Director and Chair of the Audit Committee. He currently serves as Deputy Executive Chairman of privately-held Albea Group, a global beauty and personal care packaging company which operates 35 facilities in Europe, Asia and the Americas. Mr. Waldron has held senior leadership roles at several leading listed companies in the industrial, technology and services sectors and brings a wealth of expertise in finance and business operations. Prior to joining Albea in 2022, he was Chief Financial Officer of Suez for three years after serving as Chief Financial Officer and subsequently Chief Operating Officer of Technip. He started his career at UBS Warburg where he spent 14 years. Mr. Waldron also served as an independent Board member and Chairman of finance, risk and investments at Carbon Clean, a privately-owned carbon capture company dedicated to achieving net zero.

Heike Van de Kerkhof will serve as independent Director and Chair of the Nomination Committee. She currently sits on the Board of OCI N.V.. Ms. Van de Kerkhof brings more than 30 years of experience in the chemicals, oil & gas and materials industries, having served in numerous leadership roles around the globe. From 2020 to 2023, she was Chief Executive Officer of Archroma Management, a global specialty chemicals company. During her tenure, she successfully completed the transformational acquisition of Huntsman’s Textile Effects business. Prior to her role at Archroma, Ms. Van de Kerkhof served as Vice President of Lubricants, Western Hemisphere at BP, and held positions at Castrol, The Chemours Company, and Neste Corporation. She also held many leading roles within DuPont over 18 years.

Matti Lievonen will serve as independent Director and Chair of the Compensation Committee. He is currently an independent director on the Solvay Board, appointed in 2017. Mr. Lievonen is a proven executive in the energy, forestry, power and automation industries with an extensive track record of leading businesses through climate transition. For over ten years until 2018, he served as Chairman and Chief Executive Officer of Neste Corporation, a global leader in next-generation renewable fuels and chemicals. During his time at Neste, Mr. Lievonen successfully promoted the development of clean fuels as well as Finland’s bioeconomy strategy in advancing renewable transportation fuels. He has also been involved with organizations such as Fortum Board, SSAB, Nynäs AB, Ilmarinen, and the HE Finnish Fair Foundation. Until 2021, Mr. Lievonen was also Chairman of the Board of Directors at Fortum. He has been recognized for his admirable leadership and expertise, and in 2016 was awarded an Honorary Doctorate of Technology by the Aalto University Schools of Technology.

Dr. Françoise de Viron will serve as non-independent Director, Chair of the ESG Committee and Vice-Chair of the Board. She is currently a director of the Solvay Board, appointed in 2013. Ms. de Viron is a regarded academic leader and has extensive experience in innovation, R&D and qualitative research. She is a Professor Emeritus at the Faculty of Psychology and Education Sciences and Louvain School of Management at UCLouvain in Belgium where she has been an Academic Member of various groups at UCLouvain. Ms. de Viron previously served as the president of AISBL EUCEN – the European Universities Continuing Education Network. Prior to her university position, from 1985 to 2000, she was in charge of developing Artificial Intelligence applications at Tractebel S.A. (now Tractebel-Engie).

Roeland Baan will serve as independent Director. He currently serves as President and Chief Executive Officer of Topsoe, a privately-held leading provider of clean energy and petrochemical technologies. He is also Chairman of the Supervisory Board of SBM Offshore NV. Roeland Baan has extensive experience in supply chain management, M&A, business development and operations management. Prior to joining Topsoe in 2020, he was President and CEO of Outokumpu and has held several executive roles at global organizations such as Aleris International, ArcelorMittal and SHV NV. He spent over 16 years in various roles across the globe at Shell, living in South America, in Africa and in the United Kingdom.

Edouard Janssen will serve as non-independent Director. He is currently a Director on the Solvay Board, appointed in 2021. Earlier this year, he was appointed Chief Financial Officer of D’Ieteren Group, a European leader in automotive distribution services. Mr. Janssen is also a Board member of privately-held Financière de Tubize and Union Financière Boël, as well as Co-Founder and Chair of Trusted Family. Mr. Janssen is active in academics, as Vice-Chair of the International Advisory Board of the Solvay Brussels School of Economics and Management and on the advisory board of the INSEAD HGIBS. He brings expertise in finance, strategy, entrepreneurship, business management, planning and marketing. He has served as Solvay’s Vice President in strategy and M&A between 2019 and 2021, and prior to that, he was the US-based General Manager for North- and Latin America at Solvay’s Aroma Performance Global Business Unit.
 
Dr. Mary Meaney will serve as non-independent Director. She is currently a member of the Board of Directors and of the Audit Committee of Groupe Bruxelles Lambert SA. She also sits on the Board of Directors and the Remuneration Committee of Beamery, the privately-held talent management company. She is a member of the Board of Directors and of the Finance Committee of Imperial College, London.Dr. Meaney will bring expertise in Strategy, M&A, and change management, which she acquired over a 24-year career at McKinsey. She was a Senior Partner, served on the McKinsey Shareholders Council and led McKinsey’s global Organization practice.

Nadine Leslie will serve as independent Director and is based in the United States of America. She is currently a member of the Board of Directors of Provident Financial Services , as well as a Non-Executive Director of Seven Seas Water Corporation, a water and wastewater treatment multinational company. She also sits on the Board of Trustees of Hackensack Meridian Health Network and is active as strategic consultant for civil engineering firm T&M Associates. Over a 22-year career at Suez, Ms. Leslie held several leadership positions, the last one being Chief Executive Officer of Suez North America, until 2022. Previously she served as Executive Vice President Health & Safety.

More information:
Solvay Board of Directors
Source:

Solvay

03.11.2023

Lenzing implements performance program in response to lack of market recovery

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

Revenue in the first three quarters of 2023 decreased by 5.3 percent year-on-year to EUR 1.87 bn. This reduction was primarily due to lower fiber revenues, while pulp revenues were up. The earnings trend was mainly influenced by the market environment. As a consequence, earnings before interest, tax, depreciation and amortization (EBITDA) in the reporting period decreased by 16.7 percent year-on-year to EUR 219.1 mn. The net result after tax amounted to minus EUR 96.7 mn (compared with EUR 74.9 mn in the first three quarters of 2022), while earnings per share amounted to minus EUR 4.90 (compared with EUR 2.16 in the first three quarters of 2022).

Outlook
According to the IMF, a full return of the global economy to pre-pandemic growth rates appears increasingly out of reach in the coming quarters. In addition to the consequences of the pandemic and the ongoing war in Ukraine, growth is also being influenced by restrictive monetary policy and extreme weather events. The consequences of the renewed military confrontation in the Middle East are not yet foreseeable. Overall, the IMF warns of greater risks to global financial stability, and expects the growth rate to decrease to 3 percent this year and to 2.9 percent next year.

The currency environment is expected to remain volatile in the regions of relevance to Lenzing.

The general market environment is continuing to weigh on the consumer climate and on sentiment in the industries relevant to Lenzing.

In the trend-setting market for cotton, the current 2023/24 crop season is emerging as a further 1.7 mn tonnes of inventory build-up, following 1.8 mn tonnes of inventory build-up in the previous season.

Earnings visibility remains severely limited overall.

Lenzing is fully on track with the implementation of the reorganization and cost reduction program and on this basis is implementing a comprehensive performance program focused on positive free cash flow, strengthened sales and margin growth as well as sustainable cost excellence. The overarching goal is to position Lenzing even more strongly and to further increase its crisis resilience.

In structural terms, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as the hygiene and medical sectors. As a consequence, Lenzing is very well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the trans-formation from a linear to a circular economy model.

The successful implementation of the key projects in Thailand and Brazil as well as the investment projects in China and Indonesia will further strengthen Lenzing’s positioning in this respect.

Taking the aforementioned factors into consideration, the Lenzing Group continues to expect that EBITDA for the 2023 financial year will lie in a range between EUR 270 mn and EUR 330 mn.

Source:

Lenzing AG

20.10.2023

Rieter: Further job cuts, outlook for 2023 confirmed

Rieter’s cumulative sales in the first nine months of 2023 amounted to CHF 1 092.9 million (2022: CHF 987.4 million), an increase of 11% compared to the prior-year period. In particular, supply bottlenecks eased slightly, which allowed more machines to be delivered than in the same period last year. Sales in the third quarter of 2023
were CHF 334.7 million (Q3 2022: CHF 366.8 million).

The Business Group Machines & Systems generated total sales of CHF 749.6 million in the first nine months of 2023 (+18%). The Business Group Components posted sales of CHF 206.8 million, 11% lower than in the corresponding period of the previous year, while the Business Group After Sales recorded growth of 13% to CHF 136.5 million in the first nine months of 2023.

Order intake in the reporting period was characterized by restrained investment in new machinery in almost all regions except China. Demand for consumables, wear & tear and spare parts continued to weaken due to the slowdown in spinning mill capacity utilization. Rising interest rates and high energy and raw material prices also had a dampening effect.

Rieter’s cumulative sales in the first nine months of 2023 amounted to CHF 1 092.9 million (2022: CHF 987.4 million), an increase of 11% compared to the prior-year period. In particular, supply bottlenecks eased slightly, which allowed more machines to be delivered than in the same period last year. Sales in the third quarter of 2023
were CHF 334.7 million (Q3 2022: CHF 366.8 million).

The Business Group Machines & Systems generated total sales of CHF 749.6 million in the first nine months of 2023 (+18%). The Business Group Components posted sales of CHF 206.8 million, 11% lower than in the corresponding period of the previous year, while the Business Group After Sales recorded growth of 13% to CHF 136.5 million in the first nine months of 2023.

Order intake in the reporting period was characterized by restrained investment in new machinery in almost all regions except China. Demand for consumables, wear & tear and spare parts continued to weaken due to the slowdown in spinning mill capacity utilization. Rising interest rates and high energy and raw material prices also had a dampening effect.

In this market environment, the Rieter Group received orders totaling CHF 452.2 million in the first nine months of 2023 (2022: CHF 1 095.8 million). In the third quarter of 2023, orders decreased by 44% year-on-year to CHF 127.2 million (2022: CHF 226.4 million).

Rieter expects the market to have bottomed out in the year 2023 and anticipates a gradual market recovery in the course of the 2024 financial year.

As of September 30, 2023, Rieter has an order backlog of around CHF 900 million (September 30, 2022: CHF 2 000 million). The current order backlog will allow good capacity utilization at the production facilities into the coming year. The cancellation rate in the reporting period was within the usual range, averaging around 5% of the order backlog, with a slight downward trend.

In July 2023, the Group launched the “Next Level” performance program aimed at strengthening sales excellence, sharpening customer focus, improving cost efficiency in production and optimizing fixed cost structures. By taking these measures, Rieter intends to create the basis for providing an even more agile response to the cyclical nature of the machinery business. The objective of the planned initiatives is to ensure the profitable and sustainable development of the group.

The performance program includes provisions for the net reduction of approximately 300 positions in overhead functions across the group, primarily in Germany and Switzerland. The consultation processes initiated with the employee representatives in Ingolstadt (Germany) and Winterthur (Switzerland) were completed in the third quarter of 2023. The majority of these workforce reductions are expected to be implemented by the end of December 2023.

Due to the current market situation, further market- and volume-related adjustments in the range of 400 to 600 positions will be necessary, mainly in production. However, the actual number of positions to be reduced depends on the order intake in the coming months.

Rieter continues to expect that the strategic and operational measures initiated will result in one-off restructuring costs of around CHF 45 to 50 million, which will impact earnings in the 2023 financial year.

Outlook for the full year 2023 confirmed
As announced on July 20, 2023, in view of the economic situation and the ongoing cyclical market weakness, Rieter continues to expect below-average demand for new equipment in the coming months. A revival is not anticipated until the end of 2023 at the earliest. Likewise, Rieter believes that demand for consumables, wear & tear and spare parts will not recover until towards the end of 2023.

For the full year 2023, Rieter expects an EBIT margin of around 5 to 7% (including positive special effects of less than 2%) and sales at the previous year’s level of around CHF 1.5 billion.

Source:

Rieter Holding AG

18.10.2023

Tonello at Kingpins with new technologies

Once again Tonello will be present their technologies and partnerships at Kingpins from October 18-19.

DyeMate, the ozone, THE Laser
DyeMate is Tonello's new "patent-pending" technology that reinterprets the traditional indigo garment dyeing process, by making it automatic and repeatable, efficient and sustainable: carried out in a nitrogen atmosphere, without oxygen, with controlled reduction and oxidation, to achieve results that are perfectly comparable, in terms of authenticity and "aesthetic flavor," to those of denim that fades and becomes vintage with the passage of time.

Tonello will present a collection of garments with super bleach effects. With OBleach, EGO and O-Zone triad redefined the garment bleaching process, including no harmful chemicals such as chlorine and permanganate, in favor of sustainable and healthy production.

The entire collection will be embellished and finished with aesthetic solutions and details: the natural overdyeing of Wake, the ultra-thin graphics made with THE Laser Lab, the reproducible breakages of THE Laser T and TM.

Once again Tonello will be present their technologies and partnerships at Kingpins from October 18-19.

DyeMate, the ozone, THE Laser
DyeMate is Tonello's new "patent-pending" technology that reinterprets the traditional indigo garment dyeing process, by making it automatic and repeatable, efficient and sustainable: carried out in a nitrogen atmosphere, without oxygen, with controlled reduction and oxidation, to achieve results that are perfectly comparable, in terms of authenticity and "aesthetic flavor," to those of denim that fades and becomes vintage with the passage of time.

Tonello will present a collection of garments with super bleach effects. With OBleach, EGO and O-Zone triad redefined the garment bleaching process, including no harmful chemicals such as chlorine and permanganate, in favor of sustainable and healthy production.

The entire collection will be embellished and finished with aesthetic solutions and details: the natural overdyeing of Wake, the ultra-thin graphics made with THE Laser Lab, the reproducible breakages of THE Laser T and TM.

Collections, design, collaborations
The MSP - Most Sustainable Product - collection, developed together with Kingpins and Denim House, designed by Piero Turk and Serena Conti, and processed in Tonello's Research and Development Center with the latest responsible finishing technologies, returns this year.

Tonello will also present another project: ONE Denim. A collection that aims to combat resource waste in the denim industry by demonstrating concretely how many new denim garments could be made from a single fabric by optimizing processes and choosing appropriate technologies and production methods. The fabrics chosen are from Sharabati Denim, the design is by Piero Turk, and the collection is processed by Tonello.

SA-KE
This project was born out of a dialogue between Tonello's technology and the creativity of British designers Sadia Rafique and Kelly Harrington, who produced as many as 70 artworks that are partly physically present at Kingpins and partly published in a book-zine that tells the philosophy and logic of this unique and original work. A work that combines technology, expressive research and all new forms of image generation, across the boundary between natural and artificial, but still totally human.

Source:

Tonello

adidas and IVY PARK unveil all-black collection IVY PARK NOIR (c) adidas AG
11.10.2023

adidas and IVY PARK unveil all-black collection IVY PARK NOIR

adidas and IVY PARK unveil the final installment of their collaboration together, titled IVY PARK NOIR.
The new range represents a culmination of the two brands’ work together, combining adidas’ athletic and functional excellence, with IVY PARK’s signature emphasis on shape, and trend-defying creative vision. Using a singular, black color palette, IVY PARK NOIR intentionally draws focus to fabric, fit and texture, cultivating enduring elegance through sensual, material play.

Considering all chapters of an active way of life- from warm up, to cool down- the collection elevates one’s everyday pursuits through a mix of tight and loose fitting styles. Fabrications include luxurious embossed leather, exposed mesh and lacquered latex that combine to create a complex yet sophisticated capsule. Standout pieces include body-con cropped top and pant, relaxed 3-D molded knit sweatsuits, multifunctional jackets, and the IVY PARK signature jersey.

adidas and IVY PARK unveil the final installment of their collaboration together, titled IVY PARK NOIR.
The new range represents a culmination of the two brands’ work together, combining adidas’ athletic and functional excellence, with IVY PARK’s signature emphasis on shape, and trend-defying creative vision. Using a singular, black color palette, IVY PARK NOIR intentionally draws focus to fabric, fit and texture, cultivating enduring elegance through sensual, material play.

Considering all chapters of an active way of life- from warm up, to cool down- the collection elevates one’s everyday pursuits through a mix of tight and loose fitting styles. Fabrications include luxurious embossed leather, exposed mesh and lacquered latex that combine to create a complex yet sophisticated capsule. Standout pieces include body-con cropped top and pant, relaxed 3-D molded knit sweatsuits, multifunctional jackets, and the IVY PARK signature jersey.

IVY PARK NOIR’s offering includes footwear that re-imagines a new era of style and function. Sleek molded and debossed elements add an architectural foundation to the collection’s sneakers, while a chunky, over the knee boot offers utilitarian fantasy.

More information:
adidas Sportswear footwear
Source:

adidas AG

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line (c) Reifenhäuser GmbH & Co. KG Maschinenfabrik
06.10.2023

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

Since February 2023, Manjushree Spntek has been producing high-performance spunmelts on an RF Smart Composite line from Reifenhäuser Reicofil - benefiting both from many years of experience in the packaging industry and from experience with Reifenhäuser's blown film lines. "We know a lot about plastic extrusion, for example when it comes to line operating parameters such as temperature and pressure. Processing is similar in both industries," explains Rajat Kedia. "The main difference is the distribution of the products: In plastic packaging, we had an established customer base and sold a lot of material to the big consumer goods manufacturers. The nonwovens market in India, on the other hand, is still forming, with thousands of small companies currently getting involved." These serve customers in their regions, such as hospitals.

The RF Smart Composite line is a standardized spunmelt line for smaller and emerging markets. The line produces nonwovens of the highest Reicofil quality with appropriately adapted throughput. This makes it ideally suited for applications in hygiene and medical technology and, with typically 8,200 annual production hours, it is extremely reliable. In addition, operators can start production quickly because in many cases the line can be integrated into existing buildings.

Before production could start, Manjushree built a new production building in Bidadi, a town an hour's drive from Bangalore International Airport. The building is designed to be sustainable: It uses natural light and fresh air, has comprehensive contamination control, and obtains almost all of its energy from renewable sources. Reifenhäuser Reicofil then installed, commissioned and tested the RF Smart Composite line.

Since February 2023, Manjushree Spntek has been producing high-quality spunmelted nonwovens, including ultra-soft fabrics and fabrics with special coatings for customers in the hygiene and medical industries. The material can be used, for example, for baby diapers and feminine hygiene products, but also for medical articles ranging from surgical gowns to surgical drapes.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Orthopac RXVMC Photo Mahlo GmbH + Co. KG
Orthopac RXVMC
05.10.2023

Mahlo: New straightening concept

The new Orthopac RXVMC-20 automatic straightening system for forward control of knitwear with strong distortions can remove distortions in textile webs even faster and more precisely.

"With the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the scanner system," explains Head of Sales Thomas Höpfl. Two individually controlled and driven straightening modules with a total of four bow and three skew rollers ensure that the correction of bow and skew distortions takes place in small steps. The control concept is also new. A scanner group at the infeed of the straightening machine detects distortions even before they reach the correction rollers. This way, the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outlet also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions.

The new Orthopac RXVMC-20 automatic straightening system for forward control of knitwear with strong distortions can remove distortions in textile webs even faster and more precisely.

"With the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the scanner system," explains Head of Sales Thomas Höpfl. Two individually controlled and driven straightening modules with a total of four bow and three skew rollers ensure that the correction of bow and skew distortions takes place in small steps. The control concept is also new. A scanner group at the infeed of the straightening machine detects distortions even before they reach the correction rollers. This way, the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outlet also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions.

The Orthopac RXVMC therefore shows its full strength when straightening knitwear and distortion-sensitive fabrics. Knitted fabrics are special in terms of distortion dynamics. It is difficult for operators when changing the fabric rolls to join the relatively short fabric webs with weft and loop-straight seams. Before and after unavoidable insufficient seams, the distortion (e.g. right before to left before) changes abruptly. Conventionally, the distortion change is only detected by scanning at the output of the straightener.
 
The RXVMC concept enables a shortened reaction time to jumping distortion, (especially in the case of seams) due to the improved scanning concept with scanning at the outlet and inlet. This reduces knitted fabric outside the straightening tolerance up to 50 percent after each seam. Fewer fabric pieces have to be reprocessed. It guarantees higher quality goods and thus less waste.

Source:

Mahlo GmbH + Co. KG

NOPINZ now runs the majority of their production out of its microfactory based in Devon, UK. Photo NOPINZ
NOPINZ now runs the majority of their production out of its microfactory based in Devon, UK.
28.09.2023

NOPINZ using Mimaki’s textile dye sublimation solutions

Founded in 2013, NOPINZ is a UK-based manufacturer of clothing for cyclists and triathletes. The company's first product was the ‘SpeedPocket’, a product that allows competitors to attach their race numbers more easily (and with ‘no pins’) while improving the all-important aerodynamics. Soon recognising the customer demand for premade attire with incorporated number pockets, the company embarked on a mission to manufacture these new product lines itself. Today, NOPINZ boasts a diverse portfolio, with 60% of its products made in-house, catering to a growing customer base across the UK and international markets. NOPINZ creates speed suits for some of the world’s top cycling teams, as well as competitive amateurs.

Founded in 2013, NOPINZ is a UK-based manufacturer of clothing for cyclists and triathletes. The company's first product was the ‘SpeedPocket’, a product that allows competitors to attach their race numbers more easily (and with ‘no pins’) while improving the all-important aerodynamics. Soon recognising the customer demand for premade attire with incorporated number pockets, the company embarked on a mission to manufacture these new product lines itself. Today, NOPINZ boasts a diverse portfolio, with 60% of its products made in-house, catering to a growing customer base across the UK and international markets. NOPINZ creates speed suits for some of the world’s top cycling teams, as well as competitive amateurs.

NOPINZ places a strong emphasis on sustainability and is committed to minimising its environmental impact. Using a microfactory approach gives better oversight and control of the manufacturing process, including sourcing materials sustainably and locally where possible, reducing transportation, and improving access to recycling. “Our ‘zero to landfill’ policy, means that we reduce our wastage where possible and either recycle or donate excess product to charity,” Blake adds. “We hope to become a B-Corp company in the future.”

“We tested out a few printers, before we ultimately settled on Mimaki,” Blake Pond, the founder of NOPINZ explained. Now the company’s line-up entirely consists of Mimaki’s textile dye sublimation solutions.
“During our search we prioritised the ability to produce fluorescence and accurately replicate colours. Customers often come to us with existing kit made by other manufacturers, which they want to match, so accurately replicating colour is extremely important. And even without existing kit, customers occasionally ask for specific pantone colours. When it comes to cycling kit, colour is often pivotal when considering where to buy from.”

As two flagship dye sublimation printers, both the TS300P-1800 and TS55-1800 are equipped to print on the various technical fabrics that are needed for cycling attire and faithfully reproduce colours to meet customer expectations.

Source:

Mimaki EMEA

Flachs-Koeper-Band (c) vombaur
Flachs-Koeper-Band
20.09.2023

Technical textiles made of natural fibres: Sustainable textiles for lightweight design

The combination of high strength and rigidity with sustainability and a neutral carbon footprint makes flax the ideal raw material for natural fibre-reinforced plastics. vombaur offers composite textiles made of this natural fibre for the automotive, wind power, construction or sports industries and many other sectors.

Flax fibres are rigid and tear-proof. They have natural bactericidal properties, are virtually antistatic, stain resistant and easy to spin. Humans have taken advantage of these properties to manufacture robust, stain-resistant and lint-free textiles. Between the late 19th and late 20th centuries, cotton largely replaced natural fibres. Because flax can be grown in Europe and consumes less energy and water than cotton production, the material's importance is currently growing again, for both clothing and composites. Regional textile value added chains in Europe – flax makes them possible.

The combination of high strength and rigidity with sustainability and a neutral carbon footprint makes flax the ideal raw material for natural fibre-reinforced plastics. vombaur offers composite textiles made of this natural fibre for the automotive, wind power, construction or sports industries and many other sectors.

Flax fibres are rigid and tear-proof. They have natural bactericidal properties, are virtually antistatic, stain resistant and easy to spin. Humans have taken advantage of these properties to manufacture robust, stain-resistant and lint-free textiles. Between the late 19th and late 20th centuries, cotton largely replaced natural fibres. Because flax can be grown in Europe and consumes less energy and water than cotton production, the material's importance is currently growing again, for both clothing and composites. Regional textile value added chains in Europe – flax makes them possible.

Ideal mechanical properties
vombaur makes the mechanical properties of flax usable for lightweight design. Because flax fibres are particularly rigid and tear-resistant, they ensure great stability in natural fibre-reinforced plastics (NFRPs). And thanks to their low density of 1.50 g/cm3, the fibres weigh virtually nothing. On top of this, fibre-reinforced plastics are less prone to splintering than glass fibre-reinforced plastics.

Excellent carbon footprint
The cultivation of flax binds CO2 and the production of natural fibre-reinforced plastics (NFRPs) generates approximately one third less CO2 emissions compared with conventional fibre-reinforced plastics. Energy consumption is substantially lower. This saves resources. The use of flax fibre tapes by vombaur in lightweight design applications also improves the product's carbon footprint and contributes to a secure, regional supply chain.

Recycling without impacting on quality
Flax offers another sustainability benefit: more recycling cycles than glass- or carbon fibre-reinforced plastics – without impacting on quality. Thermoplastic fibre-matrix prepregs are melted and reused in the recycling process. The natural fibres can be used in other products such as natural fibre-reinforced injection moulded parts.

Sustainable product developments for many industries
"Orthoses for high-performance sports, high-tech skis, wind turbines, components for the automotive industry or aerospace, but also modern window profiles – the application scope for our lightweight design flax tapes is amazingly diverse", as Carl Mrusek, Chief Sales Officer at vombaur explains. "After all, wherever flax tapes are used, three key properties come together: light weight, strength and sustainability".

More information:
CO2
Source:

vombaur

Peschici yarn Photo Südwolle
19.09.2023

Südwolle: Spring/Summer 2025 Collection

The Südwolle collection of yarns for weaving and circular knitting continues its evolutionary path based on the key concept of Responsibility. This principle guides Südwolle Group's commitment and engagement regarding all areas of business and stakeholders - the environment, the textile industry production chain, consumers, employees and the social repercussions of its business.

The intersection between these 6 areas has resulted in a collection in which the concept of seasonality is blurred, and products have a flexible, versatile use. The use of cutting-edge technology means yarns offer a high level of quality, suitable for apparel with outstanding durability, a factor that helps to reduce the environmental impact of textile waste and disposable fashion.

The Südwolle collection of yarns for weaving and circular knitting continues its evolutionary path based on the key concept of Responsibility. This principle guides Südwolle Group's commitment and engagement regarding all areas of business and stakeholders - the environment, the textile industry production chain, consumers, employees and the social repercussions of its business.

The intersection between these 6 areas has resulted in a collection in which the concept of seasonality is blurred, and products have a flexible, versatile use. The use of cutting-edge technology means yarns offer a high level of quality, suitable for apparel with outstanding durability, a factor that helps to reduce the environmental impact of textile waste and disposable fashion.

Overview of the collection
The collection is divided into 4 themes.
Natural, biodegradable or recycled fibre blends intended for crepe and crinkled fabrics are characterized by substantial twist and a high level of performance. The selection of fibres is oriented towards sustainability, with wool and silk organze combined with LENZINGTM ECOVEROTM viscose and Q-NOVA® regenerated polyamide.

Fuji crepe X-compact Nm 40/1 Z 1050 (40% wool 21.2 μ, 60% FSC certified LENZINGTM viscose EV), new this season, features a smooth look and no pilling thanks to the use of X-compact spinning technology, which produces yarns with excellent performance and durability.

When it comes to light, natural blends, wool and linen or wool, linen and silk blends follow the trend for softly fluid structures, such as the new Peschici Nm 42/1 Z 600 (53% wool 18.4 μ, 23% linen, 24% silk), with a fresh, dry handle and very current dappled effect, which results from the skilful combination of different fibres.

Contributing to a more sustainable and traceable textile production also involves attention to all fibres used. Mohair used for luxury yarns in noble fibres is strictly RMS (Responsible Mohair Standard) certified, which traces its origin, guaranteeing animal welfare and production according to responsible standards, similar to the analogous RWS (Responsible Wool Standard) used for wool. Bosforo RWS RMS Nm 32/1 Z 950 (20% wool 20.8 μ RWS, 60% FSC certified LENZINGTM viscose EV, 20% RMS Kid Mohair) is a fresh, bright yarn that is soft on the skin, suitable for trans-seasonal products, an example of careful selection of raw materials.

Among the fancy yarns, delicately animated structures predominate for naturally elegant creations, represented by Niche Nm 34/2 S 460 (42% wool 21.2 μ, 58% bourette silk), a twisted yarn in wool and bourette silk, which adds dynamism with its characteristic rough, knotty surface.

More information:
Südwolle yarn
Source:

Suedwolle Group

adidas re-imagines football jerseys as streetwear (c) adidas AG
adidas Manchester United LFSTLR Collection
14.09.2023

adidas re-imagines football jerseys as streetwear

adidas launches its new LFSTLR jersey collection, featuring the season 23/24 third jerseys of some its leading clubs, re-imagined as fashion-focused, lifestyle streetwear.

LFSTLR blurs the lines between football performance and streetwear culture, re-defining what it means to represent your club away from the terraces. The collection includes adaptations of the third jerseys of Arsenal, FC Bayern Munich, Juventus, Manchester United and Real Madrid, retaining the overall design blueprint of the authentic on-pitch and fan versions but with a focus on wearability and comfort over pure performance for the field of play.

Each jersey is made with an elevated base material, including heavier superior fabrics for additional comfort as well as featuring a more premium trim execution and detailing to truly ramp up the style factor. The application of a tonal adidas badge gives each jersey a clean, crisp look that gives the club crests additional prominence. Between 70-100% of the materials used in each jersey are from recycled or renewable sources.

adidas launches its new LFSTLR jersey collection, featuring the season 23/24 third jerseys of some its leading clubs, re-imagined as fashion-focused, lifestyle streetwear.

LFSTLR blurs the lines between football performance and streetwear culture, re-defining what it means to represent your club away from the terraces. The collection includes adaptations of the third jerseys of Arsenal, FC Bayern Munich, Juventus, Manchester United and Real Madrid, retaining the overall design blueprint of the authentic on-pitch and fan versions but with a focus on wearability and comfort over pure performance for the field of play.

Each jersey is made with an elevated base material, including heavier superior fabrics for additional comfort as well as featuring a more premium trim execution and detailing to truly ramp up the style factor. The application of a tonal adidas badge gives each jersey a clean, crisp look that gives the club crests additional prominence. Between 70-100% of the materials used in each jersey are from recycled or renewable sources.

adidas worked with each club to appoint a Creative Lead, tapping into the worlds of fashion and music, and ensuring the unique flair of each team came through with bespoke individuality:

  • Arsenal linked up with Grammy-award winning rapper, Pusha T
  • FC Bayern collaborated with Achraf, one of the hottest names in the German fashion and music industry
  • Juventus called upon Italian style with fashion photographer Giampaolo Sgura
  • Manchester United teamed up with Nigerian Afropop singer-songwriter, Adekunle Gold & Manchester’s The KTNA
  • Real Madrid worked with renowned Mexican rapper, Alemán 
More information:
adidas Sportswear Jersey
Source:

adidas AG

Toray Composite Materials America: Boeing Supplier of the Year Photo Toray
04.09.2023

Toray Composite Materials America: Boeing Supplier of the Year

Toray Composite Materials America, Inc. headquartered in Tacoma, Washington, has been awarded the "Boeing Supplier of the Year" award, a leadership-nominated award given to supplier companies that support and propel Boeing's strategic objectives through risk-sharing and enduring partnerships. This year, 12 companies were selected from among 11,000 Boeing suppliers worldwide, and CMA was selected as one of them for the Alliance Award. This is Toray's second award from Boeing, receiving the Supplier of the Year Excellence Award in 2019.

Toray began supplying Boeing in 1975 when it first qualified TORAYCA™ T300 carbon fiber for commercial application on the Boeing 737. Since then, Toray has provided high-performance carbon fiber and highly toughened, primary structure carbon fiber composite prepreg on various programs.

The trophy was presented by William A. Ampofo II, Vice President of Parts & Distribution Services and Supply Chain for Boeing Global Services and Chair of the Supply Chain Operations Council to CMA.

Toray Composite Materials America, Inc. headquartered in Tacoma, Washington, has been awarded the "Boeing Supplier of the Year" award, a leadership-nominated award given to supplier companies that support and propel Boeing's strategic objectives through risk-sharing and enduring partnerships. This year, 12 companies were selected from among 11,000 Boeing suppliers worldwide, and CMA was selected as one of them for the Alliance Award. This is Toray's second award from Boeing, receiving the Supplier of the Year Excellence Award in 2019.

Toray began supplying Boeing in 1975 when it first qualified TORAYCA™ T300 carbon fiber for commercial application on the Boeing 737. Since then, Toray has provided high-performance carbon fiber and highly toughened, primary structure carbon fiber composite prepreg on various programs.

The trophy was presented by William A. Ampofo II, Vice President of Parts & Distribution Services and Supply Chain for Boeing Global Services and Chair of the Supply Chain Operations Council to CMA.

Source:

Toray

Adidas: Official Match Balls of 2023/24 UEFA Champions League and UEFA Women’s Champions League adidas
22.08.2023

Adidas: Official Match Balls of 2023/24 UEFA Champions League and UEFA Women’s Champions League

adidas revealed the Official Match Balls for the 2023/24 UEFA Champions League and the UEFA Women’s Champions League.

Set on a metallic silver background, the men’s iteration of the Official Match Ball integrates a single letter from the instantly recognisable chorus lyric – ‘THE CHAMPIONS’ - onto each of the 12 stars, in an opulent calligraphy style. Visual representations of the musical tones of the song interject the stars, in striking royal purple, red and blue - colours specifically chosen to represent the footballing royalty competing for the coveted UEFA Champions League trophy.

The introduction of a bespoke anthem for the UEFA Women’s Champions League in the 2021/22 season, marked the start of a new dawn for the tournament. In honour of that moment, the new design incorporates the lyrics of the song in two of the ball’s eye-catching star panels – creating a unique circular text pattern in bright orange. The remaining ten stars feature a wavy purple and pink print, curated using the same words from the anthem, but significantly enlarged to create an abstract and attention-grabbing look.

adidas revealed the Official Match Balls for the 2023/24 UEFA Champions League and the UEFA Women’s Champions League.

Set on a metallic silver background, the men’s iteration of the Official Match Ball integrates a single letter from the instantly recognisable chorus lyric – ‘THE CHAMPIONS’ - onto each of the 12 stars, in an opulent calligraphy style. Visual representations of the musical tones of the song interject the stars, in striking royal purple, red and blue - colours specifically chosen to represent the footballing royalty competing for the coveted UEFA Champions League trophy.

The introduction of a bespoke anthem for the UEFA Women’s Champions League in the 2021/22 season, marked the start of a new dawn for the tournament. In honour of that moment, the new design incorporates the lyrics of the song in two of the ball’s eye-catching star panels – creating a unique circular text pattern in bright orange. The remaining ten stars feature a wavy purple and pink print, curated using the same words from the anthem, but significantly enlarged to create an abstract and attention-grabbing look.

The balls are optimised to cope with the demands of the modern game, incorporating a range of adidas performance technology – including a PRISMA surface texture which offers Europe’s finest players precision on the ball. The outer texture coating, found on all UEFA Champions League and UEFA Women’s Champions League Official Match Balls, offers secure grip and control on the ball while the thermally bonded seamless construction ensures the balls retain optimum shape to deliver ultimate performance on the pitch.

More information:
adidas adidas AG
Source:

adidas

Trützschler and Balkan join forces (c) Trützschler
Markus Wurster, Director Sales and Marketing at Trützschler Group (left), and Osman Balkan, Owner of Balkan Textile Machinery INC.CO (right).
18.08.2023

Trützschler and Balkan join forces

Trützschler announces their cooperation with Balkan Textile Machinery. INC.CO, a partner which completes Trützschler's product portfolio for recycling by cutting and pulling solutions.

Both Balkan and Trützschler are family-owned companies for whom sustainability in the textile chain is a major concern. Balkan is well established in Turkey, one of the most important markets for textile recycling. Their robust and reliable machines help to cut, mix and tear textile waste to individual fibers, and to press them into bales of secondary fibers. These bales can be fed to the preparation process with Trützschler machines.

Trützschler announces their cooperation with Balkan Textile Machinery. INC.CO, a partner which completes Trützschler's product portfolio for recycling by cutting and pulling solutions.

Both Balkan and Trützschler are family-owned companies for whom sustainability in the textile chain is a major concern. Balkan is well established in Turkey, one of the most important markets for textile recycling. Their robust and reliable machines help to cut, mix and tear textile waste to individual fibers, and to press them into bales of secondary fibers. These bales can be fed to the preparation process with Trützschler machines.

“We are now able to provide a complete line-up of technologically leading machinery which has been specifically developed for rotor and ring yarns from recycled materials”, says Markus Wurster, Director Sales and Marketing at Trützschler Group. “Customers benefit from less complexity when planning and executing a mill project. The combined processes from Trützschler and Balkan are perfectly fine-tuned, reliable and reproducible. And of course, customers have access to Trützschler’s premium service.” Osman Balkan, Owner of Balkan Textile Machinery. INC.CO, adds: “I am very happy that we can join forces with such a strong international player like Trützschler. Together we can make a significant contribution to dealing with textile waste globally."

Source:

Trützschler Group SE

09.08.2023

Carrington Textiles and Pincroft Debut at DALO Industry Days

The Danish Ministry of Defence Acquisition and Logistics Organisation (DALO) Industry Days event is scheduled to take place from 23rd to 24th August in Denmark. Carrington Textiles and their main manufacturing facility in the UK, Pincroft, will showcase their latest innovations in military textiles.

Carrington Textiles - after recently announcing the launch of the new stretch military ripstop fabric, Spartan HT Flex Lite, and strategically appointing the new Head of Defence and Security Fabrics -  at the event represents the commercial focus on building on an over 90 years of heritage of manufacturing military fabrics.

Likewise, Pincroft’s latest technology in non-skin contact vector protection for defence textiles and the recent involvement in printing the new Dutch Ministry of Defence’s camouflage pattern as part of their army’s uniform programme, are just a few of the textile services that will be presented at the event.

The Danish Ministry of Defence Acquisition and Logistics Organisation (DALO) Industry Days event is scheduled to take place from 23rd to 24th August in Denmark. Carrington Textiles and their main manufacturing facility in the UK, Pincroft, will showcase their latest innovations in military textiles.

Carrington Textiles - after recently announcing the launch of the new stretch military ripstop fabric, Spartan HT Flex Lite, and strategically appointing the new Head of Defence and Security Fabrics -  at the event represents the commercial focus on building on an over 90 years of heritage of manufacturing military fabrics.

Likewise, Pincroft’s latest technology in non-skin contact vector protection for defence textiles and the recent involvement in printing the new Dutch Ministry of Defence’s camouflage pattern as part of their army’s uniform programme, are just a few of the textile services that will be presented at the event.

Source:

Carrington Textiles

07.08.2023

SGL Carbon: Confirmation of the full-year guidance for 2023

  • Sales up 1.9% year-on-year to €560.5 million with stable adjusted EBITDA of €88.0 million
  • Strong business performance of the Graphite Solutions, Process Technology and Composite Solutions businesses
  • Sales and earnings decline at Carbon Fibers due to weakness of wind market
  • Impairment at Carbon Fibers of €44.7 million

Despite the increasingly difficult economic environment, SGL Carbon was able to increase sales in H1 2023 from €549.8 million in the previous year to €560.5 million. Adjusted EBITDA (EBITDApre) remained almost unchanged at €88.0 million (H1 2022: €87.9 million). The expected good business performance of the Graphite Solutions business unit and the better-than-expected sales and earnings development of Process Technology and Composite Solutions compensated the drop in demand in Carbon Fibers.

  • Sales up 1.9% year-on-year to €560.5 million with stable adjusted EBITDA of €88.0 million
  • Strong business performance of the Graphite Solutions, Process Technology and Composite Solutions businesses
  • Sales and earnings decline at Carbon Fibers due to weakness of wind market
  • Impairment at Carbon Fibers of €44.7 million

Despite the increasingly difficult economic environment, SGL Carbon was able to increase sales in H1 2023 from €549.8 million in the previous year to €560.5 million. Adjusted EBITDA (EBITDApre) remained almost unchanged at €88.0 million (H1 2022: €87.9 million). The expected good business performance of the Graphite Solutions business unit and the better-than-expected sales and earnings development of Process Technology and Composite Solutions compensated the drop in demand in Carbon Fibers.

In particular, the Graphite Solutions (GS) business unit contributed to the stable development of the Company with a 15.3% increase in sales to €280.6 million (H1 2022: €243.4 million) and a 20.6% improvement in adjusted EBITDA to €65.1 million (H1 2022: €54.0 million). GS benefited especially from the high demand of the semiconductor industry. The semiconductor and LED market segment now accounts for around 45% of GS revenue (H1 2022: around 35%).

With a 30.9% increase in sales to €64.4 million (H1 2022: €49.2 million) and a significant rise in adjusted EBITDA from €4.1 million to €11.9 million, the business performance of Process Technology (PT) was significantly above the original planning. Composite Solutions (CS) also reported a higher-than-forecast sales increase of 14.4% to €79.6 million in H1 2023 (H1 2022: €69.6 million) and an improvement in adjusted EBITDA of 26.8% to €12.3 million (H1 2022: €9.7 million). By contrast, the business performance of the Carbon Fibers (CF) unit was not in line with expectations, with a 28.9% decline in sales to €125.1 million (H1 2022: €176.0 million) and a 78.4% drop in earnings to €6.1 million (H1 2022: €28.2 million).

An important market segment for the Carbon Fibers business unit is the wind industry. Demand for carbon fibers for the wind industry has declined sharply since the beginning of the year. According to current estimates, the expected recovery in demand in H2 2023 will not materialize. SGL Carbon expects customer demand from the wind industry to pick up in 2024.

As already announced in the ad hoc release of July 24, 2023, an impairment loss of €44.7 million was recognized on the assets of Carbon Fibers as of June 30, 2023.

Results situation
SGL Carbon's adjusted EBITDA (EBITDApre) remained almost stable in a half-year comparison at €88.0 million (H1 2022: €87.9 million). Due to the lack of demand from wind industry, CF's production capacity utilization decreased and idle capacity costs weighed on adjusted EBITDA. By contrast, higher margins from product mix and volume effects in the other three business units had a positive impact on adjusted EBITDA.

Non-recurring items and one-off effects not included in adjusted EBITDA totaled minus €46.9 million in the first half of 2023, of which €44.7 million resulted from an impairment loss in the CF business unit.

In addition to the above-mentioned effects and nearly unchanged depreciation and amortization of €29.1 million (H1 2022: €28.9 million), the decline in EBIT resulted in particular from the impairment loss already described (€44.7 million). After €69.6 million in H1 2022, EBIT amounted to €12.0 million in the reporting period.

Taking into account the slightly improved financial result of minus €15.8 million (H1 2022: minus €16.6 million), consolidated net income for the first six months of the current financial year amounted to minus €10.0 million, compared to €48.8 million in the first half of the previous year.

Net financial debt and equity
To complete its refinancing, SGL Carbon issued convertible bonds with a volume of €118.7 million in June 2023 and drew an existing term loan facility of €75 million in July 2023, which was used together with cash of the Company on July 28, 2023 to repay the corporate bond (outstanding as of June 30, 2023: €237.4 million). Accordingly, cash and cash equivalents increased to €310.5 million as of June 30, 2023 (€227.3 million as of December 31, 2022) and financial debt temporarily increased to €480.4 million (€398.1 million as of December 31, 2022). Net financial debt remained nearly unchanged at €169.9 million as of June 30, 2023 (Dec. 31, 2022: € 170.8 million).

Despite the impairment loss of €44.7 million in Carbon Fibers, shareholders' equity amounted to €565.2 million as of June 30, 2023, only slightly lower than at the end of 2022 (Dec. 31, 2022: €569.3 million). This corresponds to an equity ratio of 36.1% (Dec. 31, 2022: 38.5%).

Source:

SGL CARBON SE

03.08.2023

adidas: reports 2nd Q revenues flat versus the prior year

  • Currency-neutral revenues flat versus the prior-year level
  • Top-line development reflects improved sell-out trends and conservative sell-in strategy
  • Gross margin up 0.6pp to 50.9%; strong improvement compared to Q1 reflecting better sell-through and less discounting
  • Operating profit of € 176 million includes extraordinary expenses of around € 160 million related to one-off costs, donations and accruals for future donations
  • Inventory position improves substantially versus Q1 level to € 5.5 billion; now up only 1% year-over-year

In the second quarter of 2023, currency-neutral revenues were flat versus the prior-year level. The top-line development continued to be impacted by the company’s conservative sell-in approach in order to reduce high inventory levels, particularly in North America and Greater China. At the same time, adidas second quarter revenues benefited from the first sale of some of its Yeezy inventory. The initial product drop in June generated revenues of around € 400 million in Q2, which is largely in line with the Yeezy sales generated in the prior year’s quarter.

  • Currency-neutral revenues flat versus the prior-year level
  • Top-line development reflects improved sell-out trends and conservative sell-in strategy
  • Gross margin up 0.6pp to 50.9%; strong improvement compared to Q1 reflecting better sell-through and less discounting
  • Operating profit of € 176 million includes extraordinary expenses of around € 160 million related to one-off costs, donations and accruals for future donations
  • Inventory position improves substantially versus Q1 level to € 5.5 billion; now up only 1% year-over-year

In the second quarter of 2023, currency-neutral revenues were flat versus the prior-year level. The top-line development continued to be impacted by the company’s conservative sell-in approach in order to reduce high inventory levels, particularly in North America and Greater China. At the same time, adidas second quarter revenues benefited from the first sale of some of its Yeezy inventory. The initial product drop in June generated revenues of around € 400 million in Q2, which is largely in line with the Yeezy sales generated in the prior year’s quarter.

Footwear revenues grew 1% during the quarter, reflecting strong growth in football, basketball, tennis and US sports. Apparel sales declined 3% in the second quarter. As the apparel market continues to be particularly overstocked, the company continued its conservative sell-in strategy to improve sell-through and margins in the medium term. Accessories grew 8% during the quarter driven by growth in football.  

Lifestyle revenues were down during the quarter despite extraordinary demand for the company’s Samba, Gazelle and Campus franchises. While adidas slowly started to scale its offering for these product families during the second quarter, the total volume still only represents a small portion of the company’s overall business. Sales in the adidas Performance categories continued to show positive momentum. This reflects strong demand for new product introductions such as the latest iterations of its Predator, X and Copa football boots, as well as jerseys for both the FIFA Women’s World Cup 2023 and the company’s unique portfolio of football teams ahead of the start of the European club season. In addition, the Adizero product family in running continued to gain a lot of attention around marathon races across the world, translating into higher demand. At the same time, the brand’s Barricade tennis franchise grew strongly, leveraging the excitement around major tournaments.

In euro terms, the company’s revenues declined 5% to € 5.343 billion in the second quarter (2022: € 5.596 billion).

Stronger sell-out trends and conservative sell-in
As a result of the company’s initiatives to reduce high inventory levels, currency-neutral sales in wholesale declined 10% despite double-digit growth in Greater China and Latin America. At the same time, direct-to-consumer (DTC) revenues grew 16% versus the prior year. This development was driven by strong growth in both the company’s e-commerce business (+14%) as well as own retail stores (+19%), reflecting continued strong sell-out trends across most regions. The outperformance of the company’s DTC channel versus the wholesale business was also related to the first sale of the Yeezy inventory, which was done exclusively through adidas’ own e-commerce channel.

Double-digit growth in Greater China and Latin America
Currency-neutral sales in North America declined 16% during the quarter. The region is particularly affected by elevated inventory levels in the market and – in response to this – the company’s significantly reduced sell-in. Revenues in Greater China grew 16% in Q2, reflecting double-digit sell-out growth in both wholesale and own retail. Sales in EMEA were down slightly (-1%) despite double-digit DTC growth. While the company’s initiatives to reduce inventory levels and discounting weighed on the overall top-line development in the region, adidas recorded significantly improving full-price trends during the quarter. Revenues in Asia-Pacific increased 7% during the quarter, driven by strong double-digit growth in DTC. Latin America continued to increase at a double-digit rate (+30%), reflecting strong growth in both wholesale and DTC.

Gross margin improves to 50.9%
The company’s second quarter gross margin increased 0.6 percentage points to 50.9% (2022: 50.3%). This improvement was mainly driven by price increases the company has implemented as well as by an improved channel mix. At the same time, higher supply chain costs and unfavorable currency movements continued to strongly weigh on the gross margin development. While still adversely impacting the company’s gross margin in the quarter, discounting levels significantly improved compared to the first quarter of the year.  

Operating profit of € 176 million, resulting in an operating margin of 3.3%
Other operating expenses were up 3% to € 2.582 billion (2022: € 2.501 billion). As a percentage of sales, other operating expenses increased 3.6 percentage points to 48.3% (2022: 44.7%). Marketing and point-of-sale expenses decreased 7% to € 617 million (2022: € 663 million). As a percentage of sales, marketing and point-of-sale expenses slightly decreased by 0.3 percentage points to 11.5% (2022: 11.8%). Operating overhead expenses were up 7% to € 1.965 billion (2022: € 1.838 billion), reflecting higher logistics expenses. In addition, the company recorded one-off costs of around € 50 million related to the strategic review the company is currently conducting as well as donations and accruals for further donations in an amount of around € 110 million. As a percentage of sales, operating overhead expenses increased 3.9 percentage points to 36.8% (2022: 32.8%). The company’s operating profit amounted to € 176 million (2022: € 392 million) in the quarter. This amount includes the extraordinary expenses of in total around € 160 million reflecting the one-off costs related to the strategic review as well as the donations and accruals for further donations. The sale of the Yeezy product positively impacted adidas’ operating profit by an incremental amount of around € 150 million in Q2. The operating margin reached 3.3% in the quarter (2022: 7.0%).

Net income from continuing operations of € 96 million
After taxes, the company’s net income from continuing operations amounted to € 96 million (2022: € 360 million), while basic EPS from continuing operations decreased to € 0.48 (2022: € 1.88).


Outlook

adidas expects revenues to decline at a mid-single-digit rate
On July 24, adidas had adjusted its full year financial guidance to reflect the positive impact of the first sale of some of its Yeezy inventory and a slightly better-than-expected development of the adidas business in the first half of the year. At the same time, macroeconomic challenges and geopolitical tensions persist. Elevated recession risks in North America and Europe as well as uncertainty around the recovery in Greater China continue to exist. In addition, the company’s revenue development will continue to be impacted by the initiatives to significantly reduce high inventory levels. As a result, adidas now expects currency-neutral revenues to decline at a mid-single-digit rate in 2023 (previously: decline at a high-single-digit rate).

Underlying operating profit anticipated to be around the break-even level
The company’s underlying operating profit – excluding any one-offs related to Yeezy and the ongoing strategic review – is still anticipated to be around the break-even level. Including the positive impact from the first Yeezy drop of around € 150 million, the potential write-off of the remaining Yeezy inventory of now € 400 million (previously: € 500 million) and one-off costs related to the strategic review of up to € 200 million (unchanged), the company now expects to report an operating loss of € 450 million in 2023 (previously: loss of € 700 million).

On August 2, the company launched a second drop of Yeezy inventory. Throughout the month of August, adidas is making a range of existing products available through both its own e-commerce channel as well as the digital platforms of selected wholesale partners. If successful, this second drop would further improve the company’s results. However, as the results of this drop are yet unknown, it is not accounted for in the company’s current top- and bottom-line outlook for 2023.

More information:
adidas business report
Source:

adidas

Karl Mayer Office in Bursa Photo Karl Mayer Group
Office in Bursa
03.08.2023

KARL MAYER GROUP sets up Turkish subsidiary

The KARL MAYER GROUP is intensifying its business activities in Turkey and is setting up a subsidiary in Bursa. The opening of the new site is planned for October 2023.

The company's success on the market to date has been made possible to a large extent by its close and long-standing cooperation with Erko, the KARL MAYER GROUP's regional representative. The two companies have been cooperating for more than 50 years and see further positive market development in Turkey in the medium to long term.

In order to exploit and shape the potential, they will sharpen the focus of their competences in the Warp Knitting and Warp Preparation Business Units: Erko A.S. will focus on sales, taking advantage of its long-standing regional network. The KARL MAYER GROUP will take over the after-sales service and offer customers a link to the Care Solutions world of the group. Customers benefit from next-level support with many innovative solutions, especially digital ones, for meeting the challenges of our time. At the same time, they can continue to build on the tried and trusted.

The KARL MAYER GROUP is intensifying its business activities in Turkey and is setting up a subsidiary in Bursa. The opening of the new site is planned for October 2023.

The company's success on the market to date has been made possible to a large extent by its close and long-standing cooperation with Erko, the KARL MAYER GROUP's regional representative. The two companies have been cooperating for more than 50 years and see further positive market development in Turkey in the medium to long term.

In order to exploit and shape the potential, they will sharpen the focus of their competences in the Warp Knitting and Warp Preparation Business Units: Erko A.S. will focus on sales, taking advantage of its long-standing regional network. The KARL MAYER GROUP will take over the after-sales service and offer customers a link to the Care Solutions world of the group. Customers benefit from next-level support with many innovative solutions, especially digital ones, for meeting the challenges of our time. At the same time, they can continue to build on the tried and trusted.

The headquarters in Bursa covers just under 1,000 m² on three levels. It offers space for service, an academy with textile samples and a training machine, a workshop for minor repairs and a warehouse for the spare parts business. Located in the top-selling region in Turkey, it is also designed as a contact point for customers.

Thanks to its strong position on the Turkish market, the KARL MAYER GROUP intends to support the companies here, most of which are family-run, in the forthcoming generational changes, and to provide the next generation with specialist support and qualifications.

More information:
Karl Mayer Gruppe Turkey
Source:

Karl Mayer Group

Iluna Group AW 24/25 collection inspired by three FOREVER ICONS (c) Iluna Group
24.07.2023

Iluna Group AW 24/25 collection inspired by three FOREVER ICONS

Three strong women, each different from the other, but who have managed to leave their mark on the history and evolution of the female role, and despite living in different eras, have left an indelible mark on society: Madame De Pompadour, nicknamed Reinette, the favourite of King Louis XV, Luisa Amman, called Corè by the great poet Gabriele D'Annunzio, and the iconic Vivienne Westwood, Miss Viv.
The three women are the FOREVER ICONS chosen and celebrated Iluna, where each woman becomes the protagonist of a “traveling exhibition” that will accompany Iluna between events and fairs.

Reinette
The nickname "Reinette" belonged to Madame De Pompadour, the favourite of King Louis XV. She had a significant influence in politics, arts, and fashion, shaping the style of the first half of the 18th century. Beauty and grace are represented in a floral theme, featuring small romantic details that become opulent with the use of lurex and golden cords. The color palette is soft, muted, and powderyry.

Three strong women, each different from the other, but who have managed to leave their mark on the history and evolution of the female role, and despite living in different eras, have left an indelible mark on society: Madame De Pompadour, nicknamed Reinette, the favourite of King Louis XV, Luisa Amman, called Corè by the great poet Gabriele D'Annunzio, and the iconic Vivienne Westwood, Miss Viv.
The three women are the FOREVER ICONS chosen and celebrated Iluna, where each woman becomes the protagonist of a “traveling exhibition” that will accompany Iluna between events and fairs.

Reinette
The nickname "Reinette" belonged to Madame De Pompadour, the favourite of King Louis XV. She had a significant influence in politics, arts, and fashion, shaping the style of the first half of the 18th century. Beauty and grace are represented in a floral theme, featuring small romantic details that become opulent with the use of lurex and golden cords. The color palette is soft, muted, and powderyry.

Corè
Luisa Amman, born in the late 19th century into a wealthy bourgeois family, married at a young age and became Marchesa Casati. "Corè" is the endearing nickname given to her by her lover Gabriele D'Annunzio, inspired by Kore, the Queen of the Underworld. She was a patron of the arts, an eccentric and transgressive collector. This theme celebrates opulence, from peacock feathers to Liberty-style designs in deep colours and warm metallic glimmers. An innovative proposal for the theme is the pleating technique, achieved directly in the weaving process of the Ultralight jacquardtronic laces.

Miss Viv
Vivienne Westwood, an extraordinary protagonist with an intense and irreverent life. Her insights have forever marked fashion and transformed the general standards of dressing. Rock and rebellious, she drew inspiration from street trends, anticipating avant-garde movements. In the 1990s, she brought back Tartan, mixing it with sensual roses in a maximalism that went against the prevailing trends, featuring vibrant colours. At the beginning of the third millennium, she grasped the importance of preserving the planet and left us with a motto that is more urgent and relevant than ever: "Buy Less, Choose Well, Make it Last." Within this theme, there is a new GRS-certified print that saves water, applied to ultra-fine Lurex nets, which are also certified.

Source:

Iluna Group