From the Sector

In 2020, the number of GOTS certified facilities grew by 34% globally, to a new high of 10,388 from 7,765 in 2019. 16 GOTS Approved Certification Bodies report that over 3 million people in over 72 countries were working in GOTS certified facilities.

Significant increases are seen in all regions. Top 10 countries for certified facilities are India (2,994), Bangladesh (1,584), Turkey (1,107), China (961), Germany (684), Italy (585), Portugal (449), Pakistan (391), USA (167) and Sri Lanka (126).
GOTS approved chemical inputs now number 25,913, an increase of 13% in 2020. This confirms that these inputs are increasingly used as a risk management tool by wet processors to satisfy legal and commercial residue requirements.

“The exceptional increase in this unprecedented year shows that decision makers value GOTS as an important tool to drive sustainable transformation in a comprehensive way - from field to fashion. Using organic fibres and processing them under strict GOTS criteria definitely provides a credible and strong base for market players to be successful in the future” says GOTS Managing Director Claudia Kersten.

GOTS version 6.0, to be implemented from 1 March 2021, includes stricter social and environmental criteria. Certified Entities will now have to calculate the gap between wages paid to 'Living Wages'  and will be encouraged to work towards closing this gap. Specific references to OECD Due Diligence Guidance and Good Practice Guidance for Social Criteria and Risk Assessment as well as Ethical Business Practises have been explicitly included.

A polybutylene succinate (PBS) polycondensation system was commissioned at Yingkou Kanghui Petrochemical Co. Ltd. in Dalian in the Chinese Liaoning Province at the beginning of January 2021. The PBS system, for which Oerlikon Barmag Huitong Engineering supplied both equipment and engineering, has a daily production capacity of 100 tons

It is used to manufacture high-viscosity chips for biodegradable films. Consequently, Yingkou Kanghui, a subsidiary of the Hengli Group, is catering to rising demand for biodegradable polymer products – demand that is increasing not just in China, but across the globe. Yingkou Kanghui Petrochemical Co., Ltd., founded in 2011, predominantly produces polyester chips and films. By expanding its portfolio to include the manufacture of PBS products, the enterprise is positioning itself as a pioneer of biopolymer production: In view of the large quantities of plastic waste not just in the oceans, biopolymers are considered the materials of the future.

The new plant at Yingkou Kanghui Petrochemical Co, Ltd. was production-ready with the support of Oerlikon Barmag Huitong Engineering within less than 14 months following contract signing.

Archroma, a global leader in specialty chemicals towards sustainable solutions, has been recently ranked number 1 in the “industrial chemicals” list published by the Institute of Public & Environmental Affairs (IPE) for driving transparency in their supply chain.

Archroma also entered the Top 50 of companies in IPE’s Green Supply Chain CITI Evaluation, at the 47th position. The evaluation dynamically assesses brands on the environmental management of their supply chains in China.

With a wide array of products used every day, everywhere, the company is committed to operate along the principles of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it’s our nature”. The Archroma team is therefore committed to sourcing safe and sustainable raw materials and intermediates from like-minded partners.

Heike van de Kerkhof, CEO of Archroma, recently delivered a message at the IPE 2020 Green Supply Chain Forum online, and commented: “As industry leader, we have the responsibility to keep on addressing the climate challenge, and to do everything we can together to reduce our impact on the environment. This is where the approach of the Institute of Public & Environmental Affairs supports us. They encourage us to challenge our suppliers in terms of safety, health and environment, and to go even beyond our own strict policies and processes.”

• Carbon fibers combined with injection molding replace conventional steel construction
• SGL Carbon supplies innovative carbon fiber profiles
• Serial use in a future high-volume model of BMW Group
• Construction method offers great potential for use in other automotive projects

Already in August, SGL Carbon received a multi-year order from Koller Kunststofftechnik GmbH for the production of novel carbon fiber profiles for serial use in windshields for a future high-volume model of BMW Group.

The profiles are particularly flexible fiber tows, pre-impregnated with thermoplastic resin in various dimensions. They will be compiled by SGL Carbon on the basis of its own 50k carbon fiber at its site in Innkreis, Austria, and subsequently processed by the injection molding experts at Koller to form a skeletal plastic component. The composite component will replace the previous steel-based windshield. Production of the carbon fiber profiles will start in the remainder of 2020 and will then be ramped up gradually over the next few years for the BMW Group model launch.

In the vehicle, the windshield is a connecting element between the roof frames and thus has an important stabilizing function. The carbon fiber profiles add the required stiffness and crash safety to the component. At the same time, they help to significantly reduce the weight of the roof and thus also support the driving dynamics. The injection molding process also enables particularly complex and material-efficient structures. In the BMW Group model, this innovative component concept will cut weight by 40 percent compared to conventional steel designs of the component while creating important space for cable ducts and sensors.

The production of the carbon fiber profiles themselves is also particularly geared to material and process efficiency in large-scale production. The profiles consist of several smaller fiber strands, the so-called rods, and are manufactured using the modern continuous pultrusion process. During product and process development it was one key objective to ensure that material loss during production is almost completely avoided.

"At SGL Carbon, we have been working on the development of thermoplastic carbon fiber profiles for use in injection molding for some time already. This development work is now beginning to pay off. Due to the many advantages and competitive costs, we see a great potential for the technology to be used in other automotive projects too," explains Sebastian Grasser, Head of the Automotive Segment in the Business Unit Composites - Fibers & Materials at SGL Carbon.

"Innovative lightweight construction with hybrid designs has developed into a strategically conclusive concept for Koller Group's OEM customers," confirms Max Koller, CEO of Koller Group. "SGL Carbon's high level of material expertise, combined with the process know-how of KOLLER Kunststofftechnik and KOLLER Formenbau, create the basis for a promising future in innovative lightweight construction technologies. With this order, the BMW Group has confirmed its confidence in the successful cooperation between SGL and Koller; we are particularly pleased about this", said Max Koller.
 
The Koller Group is a globally operating technology company with plants in Europe and China, as well as NAFTA. The Koller Group develops and manufactures lightweight construction, tools and serial components, primarily for the automotive industry.

Shanghai, China - DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation will exhibit in the 20th China International Dyestuff Industry, Pigments and Textile Chemicals Exhibition - China Interdye 2020. DyStar will showcase the latest product innovations at Hall 1 booth #A330.

The three-day annual event will be taking place at Shanghai World Expo Exhibition & Convention Center (SWEECC) and opens doors on 8th November. DyStar’s managers will be onsite to support visitors from production houses, manufacturers, and Brands and Retailers with essential information, helping them to make meaningful and notable decisions based on tangible benefits such as reduction of water, waste and energy consumption, thereby improving their end-products and quality.

DyStar’s sustainable solutions can further optimize productions, processes, and reduce costs. Some of these products and concepts are highlighted at the event as follows:
•    Recent launch of Cadira® Polyamide and Cadira Polyester/Cellulosic Exhaust
•    Total collection of eleven Cadira® modules
•    High Fast Dianix® XF2 Range
•    Sera® Wash M-VFN
•    Levafix® CA and Remazol® SAM offer

Despite a year full of global economic challenges, with the supply chain and stakeholders heavily strained by the global pandemic, DyStar is determined to support the industry and its customers. They can benefit from our legacy of innovations and product offerings, so that they can continue to drive sustainability and growth in their respective domains, contributing in a responsible and yet sustainable manner for a cleaner future.

Retrofitting a wiping robot to spinning systems is well worthwhile. This is confirmed by the experiences of those customers who have already installed the wiping robot. Oerlikon Barmag wiping robots have been cleaning spin packs at filament yarn manufacturing facilities in China and India for several months now, increasing efficiency considerably.

Regular wiping of the spin packs is important for process stability and yarn quality. These can be positively influenced using wiping robots, because – as confirmed by data acquisition and analysis at the respective manufacturing facilities – the yarn break rate can be reduced by up to 30% by automating the wiping process. And the yarn break rate has a direct impact on the key production figures; to this end, a considerable reduction translates into pure profit for yarn manufacturers.

Can also be retrofitted to existing systems
The Oerlikon Barmag wiping robot can be retrofitted to numerous spinning plants. Suspended from a track system mounted on the ceiling, the system automatically and autonomously targets the individual positions in accordance with the scheduled wiping cycles. In addition to the scheduled wiping processes, there are also events that cannot be planned or that are not immediately visible. Depending on the degree of integration into Oerlikon Manmade Fibers Smart Factory solutions, the wiping robot is able to identify issues such as yarn breaks or parallel wiping processes and to independently offer solutions.

The wiping robot operates in a cross-line manner. Here, the wiping quality remains constant 24/7. The high wiping quality has a positive influence on both the stability of the overall process and on the yarn quality. The time saved between cleaning cycles is a further advantage: using the robots, the interval between two wiping processes can be extended by up to 25%. The considerable increase in the spinning process efficiency achieved by the wiping robot also has a positive impact on margins. For example, one customer deploying the wiping robot was able to reduce its production costs for the same yarn by more than 3%.

At a total length of over 71 metres, the Montex finishing line that has just been installed by Monforts for Acafintex at its plant in Puebla, Mexico, is one of the highest capacity stenters the German technology leader has delivered to date.

Puebla is known as the epicentre of Mexico’s textile and clothing industry and is ideally placed for supplying both the USA and Europe, being three hours from the Gulf of Mexico for shipping via the Atlantic, and five hours from the Pacific coast as well.

Mexico's textile and clothing industry spans the entire production chain – from cotton growing and man-made fibre production to the manufacture of yarn, fabric, finished clothing and accessories. The industry is estimated to directly employ around 640,000 workers and to provide livelihoods for many more people indirectly. The country is a key supplier of textiles and clothing to the USA, but has faced fierce competition from China, which has until recently been the largest supplier of textiles and clothing to the US market.

However, the position of Mexico in the US import market has become more stable following the signing of the United States-Mexico-Canada Agreement (USMCA), which came into force in July this year. The country has also been a key beneficiary of the current trade war that is raging between China and the USA.

In addition, there is scope for higher sales in Mexico’s domestic market. The country has a population of 129 million people who are becoming increasingly prosperous, with a large proportion of younger people who are spending more on clothing.

Flexible operation

Founded in 1986, family-owned Acafintex operates as a commission dyehouse, finishing both knitted and woven fabrics for local companies in Mexico, in widths of between 100cm to 3.6 metres. The company is run by father and son team Don Francisco and Lic Francisco Moyano.

“We have very flexible operations for fabric finishing and also produce and sell our own fabrics for both the fashion industry and for the uniforms market,” says Don Francisco. “These days, we are increasingly finishing materials for technical textiles and for the automotive industry too. We have both local and international suppliers of both yarns and base fabrics and make sure we choose the best and most reliable sources. Exports now account for over 40% of our sales.”

European contract

With a  width of 3.8 metres, the new Monforts Montex line at Acafintex is equipped with no less than 12 double TwinAir drying chambers to meet the requirements of specific technical textiles to a European customer, in a contract secured following the company’s ISO 9001 certification in 2019. The line is equipped with an integrated heat recovery system and also benefits from an exhaust air cleaning system to ensure the most resource-efficient processing available on the market.

On the Monforts TwinAir system, the airflows above and below the fabric being dried can be regulated completely independently of each other, with Optiscan Auto-Balance fully controlling the distance between the fabric and the dryer nozzles via variable-frequency fan motors and CCD chip evaluation. As a result, the evaporation rate of the stenter and its energy utilisation are always fully optimised. Contact-free drying eliminates the possibility of fabric marking or stitch draft.

Highly-intuitive Monforts Qualitex visualisation software allows all machine functions and process parameters to be assessed and controlled easily, and thousands of article specific settings and formulations to be called up at any time – with 100% reproducible results.

In combination with an existing Montex stenter, the new line has expanded finishing capacity at Acafintex to an annual 20 million linear metres.

Modifications

“From the installation to the start-up, we were supported by a team of Monforts technicians and local representative Arnulf Thaler at Sattex here in Mexico,” says Lic Francisco. “Of course, every installation has its challenges and with such big machines we needed to modify several things inside the factory and also required certain modifications from Monforts which were all carried out successfully.”  

Forced, like much of the textile industry globally, to temporarily suspend operations at the height of the Covid-19 pandemic, Acafintex is now back to full production, having installed the necessary safety measures for its employees, and is anticipating a bright future.

“We are passionate about developing new materials in search of mutual benefit for both our clients and suppliers, as well as our own workforce and the environment,” Don Francisco Moyano concludes. “Investment in the latest technology like this new Monforts line plays a key role in helping us achieve our long-term goals.”

• The Lenzing Group was the first Austrian company to send goods 100 percent “Made in Austria” by train directly to China.
• The train loaded with TENCEL™ fibers reached Xinzhu station in Xi'an on September 05.

Xi’an, China – The Lenzing Group is breaking new ground due to the short-term increase in demand for sustainably produced fibers from Chinese customers. For the first time, the company delivered wood-based cellulosic fibers, which are produced at the Austrian sites in Lenzing and Heiligenkreuz, directly to China by train. Thanks to this new transport route, Lenzing is able to meet the urgent demand of its Chinese customers twice as quickly as by the usual sea freight.

The first complete train with goods 100 percent “Made in Austria” started on August 20 in the presence of Leonore Gewessler, Federal Minister for Climate Action, Environment, Energy, Mobility, Innovation and Technology, His Excellency Xiaosi Li, Ambassador of the People's Republic of China in Austria, Stefan Doboczky, Chief Executive Officer of the Lenzing Group, Thomas Kargl, Board Member of the ÖBB Rail Cargo Group, Erwin Cootjans, Chief Executive Officer of Nunner Logistics, and Erich Hampel, Chairman of the Board of the B&C Private Foundation, at the Vienna South Terminal and reached his destination on September 05 at the Xinzhu train station in Xi'an, China. The train loaded with 41 containers with TENCEL™ branded lyocell and modal fibers and a total value of EUR 1.8 mn, passed a total of 10,460 km in seven countries: Austria, the Czech Republic, Poland, Belarus, Russia, Kazakhstan and China.

The first Lenzing fiber train was received in a grand ceremony on Tuesday, September 08 at the container terminal in Xi'an. Numerous guests, including the Austrian ambassador to China, Friedrich Stift, representatives of the Xi'an Municipal Government, the China Railway Xi'an Group, the Xi'an International Trade & Logistics Park as well as representatives of the Lenzing Group, the China National Textile and Apparel Council, Lenzing customers and the media attended the ceremony.

In his speech, Friedrich Stift, Austrian ambassador to China, emphasizes the importance of international trade and sustainable development: “The delivery of Austrian-made products through the CHINA RAILWAY Express adheres to the sustainable concept of Lenzing. Since China and Austria signed the bilateral railway cooperation agreement in 1994, the two countries have maintained good cooperation in the railway field and will continue to do so in the future. China is Austria's largest partner in Asia, and it is believed that after the outbreak of the corona crisis bilateral trade will normalize in 2021.”

“This is the first time for the Lenzing Group to deliver Austrian-made TENCEL™ branded fibers directly to Chinese customers. The Silk Road has been a main transport route between Europe and Asia since ancient times. Chinese consumers affectionately call TENCEL™ fibers ‘Silk from Heaven’. The China-Europe Express can reduce the transport time between Europe and China by half, thus meeting Chinese customer’s demand for environmentally friendly fibers more quickly”, states Hu Jian, Senior Vice President of the Lenzing Group for North Asia.

The 26th edition of Intertextile Shanghai Home Textiles concluded on 26 August, following a successful three-day run at the National Exhibition and Convention Center (Shanghai). It was Messe Frankfurt’s first event to take place in Shanghai in 2020 following disruptions from the pandemic. Amid the challenges presented by the pandemic, this year’s fair provided a vital opportunity for the international home and contract textile industries to source and reconnect through virtual and in-person meetings. Offering a comprehensive range of home and commercial textile products, the fair welcomed over 600 exhibitors and attracted more than 25,000 trade buyers.

Speaking as the fair concluded, Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “Intertextile has always been dedicated to providing an ideal platform for the international home textile industry and we are delighted to continue to do so during these unprecedented, challenging times. In view of the current global travel restrictions, this year’s fair offered a series of digital tools in addition to the traditional exhibition, allowing the fair to reach as wide an audience as possible. We are glad that this new format was highly recognised by the participating exhibitors and buyers alike.”

“Whilst economic activity in China is progressively recovering and domestic consumption continues to grow, the country’s exports are taking longer to rebound,” Ms Wen added. “One of the main objectives of this year’s fair was to connect domestic and international suppliers and buyers who are eager to make personal contacts and get back to business. As evidenced by feedback from numerous exhibitors and visitors, the fair has been able to help and support the industry’s recovery, so we are delighted with the results.”

Online business matching platform connected worldwide companies
 
In view of the current international travel restrictions, this year’s fair launched a brand new online business matching platform, which connected around 200 buyers from over 50 countries and regions to 60 exhibitors. The platform introduced multiple new functions, such as live-stream product presentations and a real-time chat platform to better facilitate business exchanges between suppliers and buyers from around the world. One exhibitor participating in the platform was Suzhou Roufang Textile Technology Co Ltd. “Yesterday we had a live-stream product presentation, which attracted around 200 buyers. The online platform is useful for us as we could showcase our new products and design concepts to overseas buyers, and let them know that we are still here to serve them,” the company’s Business Manager Ms Yu Qian Ru explained.

Mr Azam Osman, Manager of the Factory Depot (Pty) Ltd from South Africa expressed his satisfaction about the online platform: “I am glad that the fair provided the online business matching service where I have seen a lot of quality furniture and decorative fabric exhibitors. I’m interested in connecting with them.” Another buyer, Ms Elena Freyuk from Ziptown Trading Inc. said: "I am pleased that the fair offered both live-stream and video recording product presentations as I was unable to watch the live presentation due to time difference. The services were very thoughtful!”

A source of inspiration for the industry
 
To ensure fairgoers can discover the latest design and industry trends and insights, this year’s fringe programme presented a series of high quality events, covering the industry’s hottest topics. Some of the highlights included the 2021 Intertextile Trend Forum, which was led by Shen Lei, the Chinese representative of the Intertextile International Lifestyle Trend Committee. The forum brought together five prominent Chinese designers including Ben Chen, Ben Wu, Meng Ye, Paul Pang and Xie Ke, who presented an in-depth interpretation of the theme of 2021 Intertextile Trends, “BOUND”. Other events included Ride the Storm – Home Textile Digital Printing Forum, Tmall Seminar on industry digitalisation, Furniture & Home Textile Direct Negotiation Event and more.

Asia’s leading trade platform for the home and contract textile industry, Intertextile Shanghai Home Textiles, is ready to welcome over 600 exhibitors to China’s commercial hub from 24 – 26 August. As China’s economy continues its recovery, the upcoming fair will serve as a key platform for the industry to reconnect and prepare for the seasons ahead. Taking consideration of current international travel restrictions, Intertextile has launched a brand new online business matching platform, enabling participation for those who cannot travel to Shanghai.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “2020 has been a difficult and unpredictable year for every business and industry across the world, so we are pleased to be providing a platform for the home textile industry to connect and recover from the coronavirus pandemic. Intertextile Shanghai Home Textiles is the first physical trade event for the sector held by Messe Frankfurt since January, so we hope that the fair assists the sector to join forces and overcome this challenging year together.”

Ms Wen continued: “Our first priority is to create a clean and hygienic space for all participants to source and network. To achieve this goal, the fair will implement extra health care and hygiene precautions onsite. On the other hand, we are aware that a number of travel restrictions are still in place across the world. With this in mind, Intertextile will offer a series of online services for those who are unable to travel to Shanghai, allowing the fair to reach as wide an audience as possible.”

2020 fair highlights

To provide buyers with greater efficiency, the fair, which covers four halls, will be divided clearly by product categories: Household Hall (hall 3), International Brands / Upholstery Hall (hall 4.1), Brand Fabrics Hall (hall 5.1) and Sofa Fabrics Hall (hall 6.1).

In addition, the Contract Business 360° concept will return this year, with over 40 premier upholstery exhibitors presenting their latest textile products and furnishing solutions for contract use. Exhibitors include Guangzhou Yuanzhicheng Home Textile, Haining Julai Textile, JAB, Morgan Shanghai, Symphony Mills, Suzhou Roufang, Ter Molst International, Zhejiang Hexin and Zhejiang Maya Fabric. Furthermore, top brands such as Agmamito from Poland and Wollsdorf Leather from Austria will be exhibiting for the first time at Intertextile.

Online business matching platform offers new sourcing landscape

Although face-to-face interaction is irreplaceable, a virtual complement has become more important as a result of the worldwide pandemic. To support the industry during these unprecedented times, Intertextile has launched a brand new online business matching platform. With this free service, participants are able to source and network at their fingertips. The virtual platform will offer many new features including:

• Easy sourcing: exhibitors are categorised by product groups including Sofa / Decorative Fabrics, Curtains and Accessories, Bedding and Finished products, Shading and Accessories, and Editors
• Live-streamed product presentations of exhibitors
• Smart recommendations: pre-selected exhibitor lists will be provided to buyers based on their personal preferences and interests
• Convenience: participants are able to use the service through computers or portable devices without the need to download any software

High quality fringe programme covers comprehensive topics
 
The fair’s event programme will once again provide the industry with the latest trends and insights in four topics: Design Inspiration, Business O2O, Textile & Technology and Industry Empowerment. One of the highlights will be the 2021 Intertextile Trend Forum, led by Shen Lei, the Chinese representative of the Intertextile International Lifestyle Trend Committee. The forum will bring together five prominent Chinese designers including Ben Chen, Ben Wu, Meng Ye, Paul Pang and Xie Ke, who will delve into the theme of 2021 Intertextile Trends–“BOUND”, as well as the Chinese market conditions. The event will be held on day 1 of the fair, from 14:00 – 17:00 in hall 5.1 booth C18, and streamed live online.

Another not-to-be-missed event is the Ride the Storm – Home Textile Digital Printing Forum, which will include an array of educating seminars that cover the latest digital textile printing trends and technologies. The forum will be held on day 2 of the fair, from 13:20 – 17:20 in hall 3, booth M12.

Furthermore, joining forces with Tmall Global, the largest cross border B2C online retail platform in China, the fair will host a series of seminars delivering the solutions and strategies for industry digitalisation during the afternoon of day 1. In addition, the well-received Furniture & Home Textile Direct Negotiation Event will return to provide an excellent opportunity for furniture companies and fabric brands to collaborate.

Additional health care and hygiene precautions will be in place

As trade fair co-organisers, Messe Frankfurt’s number one priority always remains the health and safety of fairgoers. To maintain a clean and hygienic environment for visitors and exhibitors to meet in, extra measures will be in practice at the fair. These include: real-name registration, onsite temperature checks, frequent sterilisation of public areas and distancing measures for forum / seminar audiences, amongst others.