From the Sector

The Middle East’s industrial sector is synonymous with high-risk environments, particularly in oil and gas production. Workers face hazards such as flash fires, chemical splashes and electric arcs—all within the context of demanding conditions, including sweltering heat and long shifts. In response to these challenges, flame-retardant (FR) fabrics with stretch properties are emerging as the next generation of protective workwear, delivering comfort, safety and durability.

Traditionally, FR fabrics prioritised protection over comfort. However, the increasing demand for ergonomic clothing has driven a shift towards stretch solutions. Thanks to innovations in textile engineering and the influence of modern fashion, these fabrics now combine unparalleled flexibility with the stringent safety standards required in high-risk industries.

Stretch fabrics such as Carrington Textiles’ Flametougher 290AS Flex and Flameflex 300AS demonstrate how this transition is not just a luxury but a necessity. Flametougher 290AS Flex, for example, incorporates 19.5% CORDURA® nylon 6,6 for exceptional durability and strength, blended with 78% cotton for lightweight comfort. At just 290gsm, it ensures workers maintain mobility without compromising on protection.

Meeting the needs of Middle Eastern workers, Flameflex 300AS, weighing 300gsm, provides a perfect balance of durability, flexibility and flame resistance. Its 83% cotton and 14% polyester composition ensures longevity, while 2% EOL fibres enable enhanced elasticity—critical for workers in physically intensive roles such as oil rig operations or refinery maintenance.

Flexibility in workwear isn’t just a matter of comfort, it’s a matter of safety. Restricted movement can lead to fatigue, reduced compliance with safety standards and accidents. Stretch FR fabrics excel in adaptability. Whether it’s a worker scaling scaffolding on an oil platform or handling maintenance in a petrochemical plant, garments made with stretch FR textiles allow for the unrestricted movement critical to performing tasks safely.

The rise of these type of fabrics also owes much to the fashion industry. Decades of innovation in stretch garments for everyday use have created a ripple effect in workwear. Workers increasingly expect the same level of comfort and fit in their protective clothing, and manufacturers are responding.

Kornit Digital LTD. engaged in sustainable, on-demand digital fashion and textile production technologies, will unveil its transformative home décor solutions at the world’s largest trade fair for home textiles, Heimtextil 2025. The Company will present a furniture collection in collaboration with the prestigious Israeli brand Niso Furniture.

The collaboration will feature a fully designed living room concept, showcasing sofas, armchairs, a dining table, and curtains—all created using Kornit’s digital printing systems. This collection will highlight how Kornit’s technology enables designers and manufacturers to transform spaces with infinite customization options, delivering premium-quality, sustainable products on demand.

Kornit’s approach offers a unique ecosystem that supports a virtual-first supply chain, eliminating inventory and waste by producing only what’s needed, when it’s needed. The collection demonstrates the flexibility to print on a wide variety of fabrics—naturals, synthetics, and blends—using a single ink set, ensuring a seamless design process across multiple materials and applications. Visitors to the Kornit booth will witness firsthand how this technology empowers personalization and creativity while achieving superior speed and sustainability.

“This partnership with Niso Furniture embodies the digital transformation sweeping through the textile and furniture industries,” said Chris Govier, EVP Strategic Growth and Marketing at Kornit Digital. “Together, we are creating a new paradigm for home décor—one where creativity, sustainability, and agility converge. Heimtextil 2025 is the ideal platform to showcase how Kornit’s demand-before-supply model enables designers and businesses to deliver unique, high-quality pieces while transforming traditional supply chains. We’re excited to engage with industry leaders, customers, and partners as we shape the future of home décor.”

Leon Edot, co-owner of Niso Furniture, echoed this sentiment: “Our collaboration with Kornit Digital reflects our shared vision of combining creativity and technology to redefine furniture design. The collection we’ve created represents a new era in home décor, where innovation knows no boundaries. We’re proud to represent Israeli ingenuity on this global stage and to showcase our ability to inspire and lead in design and technology.”

Fibre Extrusion Technology Ltd (FET) of Leeds, UK enjoyed a highly successful exhibition at COMPAMED 2024 in Düsseldorf. This was the first time that FET had exhibited at this leading international trade fair for the medical technology supplier sector, a reflection of the company’s growing role in the global medical sector. In 2023-24, over 60% of FET’s turnover was derived from the medical market.

“It is never certain whether a new exhibition will prove to be a successful venture until it is tested in practice” commented FET’s Managing Director Richard Slack, “but we are delighted to report that COMPAMED 2024 exceeded all expectations. In fact, we have already booked a stand for next year’s exhibition in November, albeit in a slightly different location”.

COMPAMED 2024 attracts suppliers of a comprehensive range of high-quality medical technology components, services and production equipment for the medical industry. FET’s expertise in this sector therefore proved to be a perfect fit. With almost 40 serious customer leads taken at the show from both existing and previously unidentified clients, the initial outlook is for a very successful exhibition which will be followed up by future participation at this annual event.

FET’s established expertise lies in laboratory and pilot melt spinning equipment for a vast range of applications, especially precursor materials used in high value medical devices and specialised novel fibres from exotic and difficult to process polymers. In cases where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

Central to FET’s success has always been its ability to provide customers with advanced testing facilities and equipment at its Fibre Development Centre in Leeds, complemented by unrivalled knowledge and expertise in research and production techniques.

FET has successfully processed over 100 different polymer types and its systems can melt spin resorbable polymers in multifilament, monofilament and nonwoven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes.

Dibella is again increasing the use of Cotton made in Africa cotton according to the mass balance system. In 2025, the company will purchase 825 tons of raw fibres. This corresponds to an increase of 10% compared to the previous year.

Dibella has been implementing Cotton made in Africa (CmiA) cotton in its supply chain in accordance with the mass balance system since 2017, thereby supporting socially and ecologically sustainable cotton production in Africa. With this further increase, Dibella is fulfilling its corporate goal of “increasing the use of sustainable fibers”.

The mass balance system allows the raw cotton to be easily implemented in the production process at Dibella's suppliers, while at the same time having a high impact on African cotton farmers. The license costs incurred are borne by Dibella and are not passed on to customers. In this way, Dibella aims to raise awareness for more sustainable raw fiber production, away from cost discussions.

Cotton made in Africa cotton causes up to 13% less greenhouse gas emissions compared to the global average. No artificial irrigation is used during cultivation. This not only saves drinking water, but also protects valuable water resources in regions that are often affected by water shortages. Not using genetically modified seeds protects natural biodiversity. This specific example shows just how much the cotton farmers benefit: In Côte d'Ivoire, the income of farming families from the sale of CmiA cotton increased by almost 18 percent between 2015 and 2020, according to an independent study* commissioned to assess CmiA's activities and their impact.

Pili, a French pioneer in biobased dyes and pigments, partners with Orta, the Turkish denim mill and Citizens of Humanity, a California-based high-end denim brand known for its commitment to quality and sustainability.

They are beginning a transformative shift in the denim industry with the commercial launch of the first products dyed with Pili’s biobased indigo. The first products will debut in January in the Spring 2025 collections of Citizens of Humanity and AGOLDE.

A New Ecological Standard for the Denim Industry
In 2024, Pili achieved a major milestone by producing its first tons of biobased indigo, enabling the creation of sustainable denim articles, a turning point in the company's efforts to decarbonize the textile industry especially denim.

Pili has developed unique processes combining fermentation and organic chemistry to offer a high-performance, eco-friendly alternative to petrochemical dyes. Their ecological alternative significantly reduces the use of toxic chemicals and fossil resources, while aiming to cut CO2 emissions up to 50%. It meets the same performance as petrochemical indigo while seamlessly integrating into existing dyeing processes without requiring additional investment in commercial dyeing equipment.

Pili’s colors development is based on standardized Life Cycle Assessments (LCAs), ensuring a rigorous process to measure and minimize their environmental impact.

A Partnership Driving Sustainable Transformation in the Industry
Fiber and dye are the two main components of denim products and also the ones with the greatest impact on their production. The partnership between Citizens of Humanity, Pili, and Orta establishes one of the highest ecological standards in the market with the use of regenerative cotton and biobased indigo.

Pili biobased indigo will make its debut in Citizens of Humanity and AGOLDE’s Spring 2025 collections. This long-term partnership between Citizens of Humanity, Orta, and Pili will continue to expand in future collections. The launch will be exclusive on NET-A-PORTER on January 6, 2025, before being extended to agolde.com, citizensofhumanity.com, and other global retailers.

A Key Step Towards the Decarbonization of the Color Industry
Building on this first success, Pili is accelerating the development of coloring solutions for various industrial applications, particularly in the inks, paints, and polymers sectors. The aim is to decarbonize everyday products using high-performance biobased pigments, with the first applicative tests set to begin this year. Pili continues its mission to decarbonize the color industry, paving the way for a sustainable revolution.

Autoneum expands its sustainable product portfolio for commercial vehicles with new polyester-based side and rear wall panels. Their carrier material consists of Propylat PET, the company’s eco-friendly and fully recyclable Pure technology made of 100 percent polyester. Autoneum’s components thus offer a significantly more sustainable alternative to the composite or thermoset resin panels commonly used in trucks today, which are difficult to recycle. Thanks to the unique material composition of Propylat PET, they contribute to optimized acoustic and thermal management.

With the establishment of a dedicated Business Unit Commercial Vehicles at the beginning of 2024, Autoneum has set the course for further sustainable and profitable growth in this market segment on a global scale. Manufacturers of medium and heavy trucks as well as agricultural vehicles thus benefit not only from Autoneum’s existing production footprint and comprehensive product and technology portfolio, but also from the Company’s longstanding experience in the development and manufacturing of environmentally friendly monomaterials. Components such as the new polyester-based side and rear wall panels support customers in improving the environmental performance of commercial vehicles and are therefore an important step towards a circular economy also in this vehicle segment.

The carrier material of Autoneum’s sustainable trim components consists of 100 percent polyester. Thanks to the high content of recycled fibers and the excellent end-of-life recyclability of Propylat PET, the side and rear wall panels from Autoneum are considerably more environmentally friendly than the composite or thermoset resin alternatives commonly used in trucks today. Furthermore, additional components can be welded onto the material without the use of adhesives or other chemicals, which further increases the products’ recyclability at the end of their service life. Due to the unique material composition of Propylat PET, the components also improve the acoustic and thermal insulation of the vehicle interior and are characterized by minimal emission of volatile organic compounds as well as low odor. In addition, Autoneum continues to invest in the develop-ment of monomaterial components for commercial vehicles, where both the carrier material and the aesthetic surface are made entirely of polyester, thus further advancing the transition to a sustaina-ble circular economy.

Autoneum has supported Renault Group in the development of Renault Emblème, a low-carbon demonstration car designed to reduce greenhouse gas emissions by 90 percent over its entire life cycle. As a key partner of the project, Autoneum further optimized the environmental performance of its sustainable Pure technologies, which were used for numerous components in the vehicle interior and exterior. Leveraging its proven expertise in the development of lightweight and fully recyclable monomaterials with a high recycled content, as well as in the areas of life cycle analysis (LCA) and product innovation, Autoneum was able to reduce the carbon footprint of its parts and contribute to a significant reduction in vehicle weight for Renault Emblème.

Increasingly stringent regulations to reduce greenhouse gas emissions on a global scale, new directives and the electrification of mobility require innovative approaches from the entire automotive industry. To support vehicle manufacturers in achieving their sustainability targets, Autoneum continuously optimizes the environmental performance of its products and processes: from further increasing the share of recycled content and the end-of-life recyclability of its lightweight technologies to reducing waste and shifting to renewable energy in its production facilities. In addition, the Company is working closely with customers and partners to validate data and products together. One of the most recent examples of such a successful collaboration is Autoneum’s contribution to Renault Emblème.

The Renault Emblème demonstration car emits 90% fewer greenhouse gases over its entire life cycle than a comparable vehicle produced today. To achieve these ambitious decarbonization targets, Renault Group assembled more than twenty suppliers from across the industry to participate in specialized projects in five different areas: eco-design, raw material selection, manufacturing, use and end of life. In addition to providing valuable expertise in the areas of LCA and product development, Autoneum’s contribution entailed the further optimization of its environmentally friendly Pure technologies, which already today are characterized by an excellent sustainability performance across the product life cycle and also include the Company’s growing portfolio of monomaterial technologies made of 100 percent polyester.

Autoneum’s innovative and lightweight materials were used for around thirty fiber-based components in the interior and exterior of Renault Emblème, including the carpet, the underbody panels and wheelhouse outer liners as well the front and rear trunk. Thanks to the high recycled content, the waste-free production process and the excellent recyclability of the materials at the end of their service life, Autoneum was able to reduce drastically the carbon footprint of the components. This outstanding achievement was made possible by further boosting the sustainability performance of existing technologies such as Ultra-Silent, Propylat PET, Hybrid-Acoustics and Autoneum’s monomaterial polyester carpet systems. In addition, the parts contributed to a weight reduction, which positively affected both the carbon footprint and the range of the electric car.

Conservation International and Sateri, a leading global producer of textile fibres, have announced the launch of the third phase of the Poyang Lake Ecosystem Restoration Initiative. This new phase marks a critical milestone in restoring China’s largest freshwater lake by integrating carbon neutrality efforts, building on the initiative’s significant success since its inception in 2019.

Located in Jiangxi Province, in the southeastern part of the country, Poyang Lake plays a critical role in regulating floods in the Yangtze River and supports the livelihoods of more than 45 million people living in the province, contributing more than 15% of the Yangtze River’s annual runoff. It is also a wetland of national and global importance, providing a habitat for flora and fauna of high conservation value, including the critically endangered Siberian crane and finless porpoise.

This new phase marks the fifth year of collaboration between Conservation International, a global non-profit organisation dedicated to protecting nature for the benefit of people and the planet, and Sateri. The initiative has seen significant successes since it began in 2019, including:

• Strengthening the management of 473,000 hectares of protected areas across 50 ecological zones;
• Enhancing the capability of 2,000 wetland rangers through capacity-building programme;
• Improving the habitat management of 350 species of wildlife, including the critically endangered finless porpoise and Siberian crane;
• Supporting the construction of five community artificial-wetlands for wastewater treatment, which can treat 56,000 tonnes of agricultural and domestic sewage; and
• Benefiting 25,000 local community members through livelihood support, vocational capacity-building and environmental education programmes.

Zhang Cheng, Program Director at Conservation International China, emphasized the project’s broader impact, "This initiative has truly enhanced biodiversity conservation and ecological education, while empowering local communities with sustainable livelihoods. It demonstrates the value of collaborative approaches in balancing ecological protection with human well-being."

In line with Sateri’s 2030 aspiration of becoming a ‘net positive impact’ company, the newly-launched third phase will advance these successes by focusing on:

• Research on the Freshwater Health Index (FHI) for the basin
• Protection and restoration of small wetlands
• Better climate change mitigation and adaptation for resilience

This collaboration, supported by the Jiujiang Municipal Government of the Jiangxi Province, underscores the shared commitment of both organisations to advancing biodiversity and sustainable development in one of China’s most vital freshwater ecosystems.

The Poyang Lake Basin Ecological Protection Project highlights Sateri’s efforts to address environmental challenges through practical actions and partnerships. The company continues to prioritize biodiversity conservation and sustainability while encouraging collaboration to achieve these goals.

Cai Zhichao, Vice President of Operations at Sateri, emphasised the initiative’s alignment with the company’s sustainability goals, "At the heart of our operations lies a commitment to the bioeconomy, where we aim to protect the natural resources we use. This conservation initiative not only helps us meet our internal sustainability targets but also contributes to advancing the United Nations Sustainable Development Goals (UNSDGs) 6 – Clean Water and Sanitation; 11 – Sustainable Cities and Communities; 12 – Responsible Consumption and Production; 13 – Climate Action and 15 – Life on Land. We accomplish this through innovation, advanced technology and low-carbon practices.”

RUDOLF, a leading global medium-sized specialty chemical company, is adopting a new management structure at the beginning of 2025 to accelerate the implementation of its strategic goals.

The aim remains to further strengthen RUDOLF‘s international market position and to sustainably, expand the company‘s innovative strength in an increasingly dynamic competitive environment.

The company appoints Marcos Furrer as CEO, Dr Gunther Duschek as CTOO and Dr Oliver Kusterle as CSO – Dr Wolfgang A. Schumann becomes Chairman of the Board of Directors.

Global strategy - local execution
The reorganisation also underlines RUDOLF‘s commitment to remain a leading player in the speciality chemical industry and to make a sustainable contribution to the future of the textile, construction, paper and coating additives industries.

Change in the management structure
At the beginning of 2025, Mr Wolfgang Schumann and Dr Wolfgang A. Schumann will take over the chairmanship of the newly established Board of Directors as its Co-Chairs. In his new role, Dr Schumann will focus specifically on developing strategically important business in Asia in order to further expand the company‘s market position there.

‘It is with great pleasure and confidence that I hand over the role of CEO to Marcos Furrer. I am equally pleased that Dr Gunther Duschek as CTOO and Dr Oliver Kusterle as CSO, in their existing global responsibilities, will round off the operational management team in terms of continuity and commitment. This new management structure is a decisive step for the future of our company. It will apply from the beginning of 2025. In my new role as Chairman of the Board of Directors, I will focus specifically on the development of the strategically important business in Asia and continue to be the point of contact for our joint ventures. I am convinced that this realignment will enable us to further expand and strengthen our market position. I would like to thank all employees for their commitment and support over the past years and look forward to continuing to advance the vision of RUDOLF together with the new management team and to serve our customers worldwide even better.’

Marcos Furrer has been appointed as the new CEO of the RUDOLF Group and will also take on the role of Chief Marketing Officer (CMO). His many years of experience in the speciality chemical industry and his strategic insight make him the ideal person to drive RUDOLF‘s global vision forward.

‚I am very pleased to take on the role of CEO of the Rudolf Group. You can literally feel the Group‘s more than 100 years of activity in the textile chemical business. The excellent team and the special customer proximity are the cornerstones of our success, which I would like to build on in order to further develop the successful strategic path. I am convinced that with this new approach we will not only strengthen our international market position but also make our contribution to a sustainable future. Together with our dedicated team, I look forward to advancing the vision of RUDOLF and serving our customers worldwide even better.’