From the Sector

• More ambition and joint European efforts needed

On Friday 30 September, the EU Energy ministers approved a Council Regulation proposal to address high energy prices. The Regulation focusses on the electricity prices and electricity demand reduction, on a solidarity levy from the fossil fuel sector and a retail levy for SMEs. While these initiatives are driven by goodwill, they miss the point of bringing gas prices down – the one measure that would bring the biggest impact on European industry.

EURATEX – as the voice of the European apparel and textiles manufacturers – regrets this lack of ambition: the Regulation does not foresee any meaningful action to directly support the European industry. This can accelerate the de-industrialisation of Europe and loss of industrial capacity to secure the European standard of living and implementing the Green Deal.

“We call on the EU and Member States to pursue our common European interests. The hesitation to adopt a European price cap on natural gas, accompanied by massive national spending programs to subsidise domestic gas consumption, is a dereliction of duty”, said Director General Dirk Vantyghem.

Triggering competition among Member States rather than promoting cooperation in bringing gas prices down for all European companies will also prove ineffective: indeed, the industrial structure in the European Union is fully integrated. Once a segment of the value chain perishes because of the crisis in one country, all companies based in the EU will suffer its negative effect, driving prices up in the supply chain and adding further strain to our operations. The European industry will be saved as a unified industry, or it will not be saved at all. Fragmenting the internal market will not protect any Member State’s domestic manufacturing.

In addition to a EU-wide price cap on gas, EURATEX calls on the European Commission to swiftly amend the Temporary Crisis Framework, making sure the criteria and thresholds applied do not exclude vulnerable companies from possible support (e.g. in textile finishing and services). Euratex also encourages the European Commission to revise the ETS Indirect Carbon Leakage mechanism and include the man-made fibres, non-wovens, spinning and weaving sectors.

It is high time now for the European Union, said the association – in particular for Member States and the Commission – to step up their ambition and adopt a European vision: a chaotic and fragmented approach will not mitigate the crisis but accelerate it.

BOGNER and James Bond – a perfect symbiosis of action, entertainment and athluxury lifestyle. The partnership started over 50 years ago when Willy Bogner Junior filmed the ski scenes for On Her Majesty's Secret Service (1969). Building on the success of the collaboration, Willy went on to work on three more James Bond productions. In 2022, both partners celebrate an anniversary: 90 years of BOGNER and 60 years of the James Bond film franchise. To mark the long-standing partnership as well as the two anniversaries, a limited capsule collection is released, consisting of two complete ski outfits for men and women, ski hardware and accessories.

Carbios announced the appointment of Pascal Bricout as Chief Strategy and Financial Officer and a member of the Company’s Executive Committee.

Mr. Bricout will oversee the management and organization of Carbios’ Finance division. He will also steer the Group’s Strategy, investor relations and the launch of the company’s Corporate Social Responsibility policy. He joins the company with over 30 years’ experience in finance, strategy and international mergers and acquisitions.
 
Prior to joining Carbios, Mr. Bricout served as Chief Financial Officer for Michelin in Asia, which is a major area of growth and development for the company. Over the past 10 years, he has focused primarily on major strategic mergers and acquisitions.

Mr. Bricout holds a Master Degree in Finance from Université Paris-Dauphine. He began his career at PwC, as a manager in the International Transactions Services teams in Paris and London.

Mr. Bricout, Carbios’ Chief Strategy & Financial Officer noted: “I am thrilled to be joining Carbios and proud to take part in this concrete, meaningful advance toward circular economy. Having developed unparalleled breakthrough technologies in plastic and textile biodegradation and biorecycling, Carbios now needs to execute a successful industrial and commercial phase. This is crucial for companies using PET to achieve, from 2025, their sustainable development goals. Within this dynamic context, Carbios and its subsidiary, Carbiolice, are poised to become global leaders in the development and industrialization of innovative bioprocesses to revolutionize the life cycles of plastics and textiles.”

The Lenzing Group and VERBUND, an energy transition company, launched the first development stage of the largest ground-mounted photovoltaic system in Upper Austria. Together with its energy partner VERBUND, Lenzing is also paving the way for the transition to zero-emission mobility. The installation of electric vehicle charging infrastructure at the company’s premises underlines Lenzing’s commitment to the energy transition process.

Thanks to the ground-mounted photovoltaic system at the “Ofenloch” landfill site, Lenzing, in conjunction with VERBUND, is consistently moving forward on the path to a carbon-free energy supply and has commissioned the first half of the new photovoltaic system with a peak power of 2,780 kWp. Full commissioning of the system with a peak power of 5,560 kWp is envisaged in mid-October. Annual electricity production will amount to 6,000,000 kWh, which is expected to cut CO₂ emissions by some 4,400 tonnes per year. The Austrian pioneer in fiber production already commissioned three rooftop photovoltaic systems in spring/summer of 2022, with a peak power of 1,454 kWp and annual electricity production of some 1,508,000 kWh. The electricity flows directly into the company’s on-site production and will also power electric charging stations in future. In the first development stage, 16 wallboxes are set to be installed by the end of the year. A further 32 charging points are planned for 2023. The charging stations will be accessible to staff, visitors and the company’s own vehicle fleet.

“VERBUND’s photovoltaic operator model allows us to make the transition to solar power without incurring investment costs or risks. Thanks to the constant expansion in renewable energy, we remain on course to ecologize the value chain, while optimizing our carbon footprint, cutting costs and reducing the load on the grid, as we are using nearly 100 percent of photovoltaic power in our production,” explains Christian Skilich, Chief Pulp Officer of the Lenzing Group.

INDA, the Association of the Nonwoven Fabrics Industry, is mourning the loss of Walter “Walt” G. Jones, Chief Executive Officer, Precision Fabrics Group, Inc., of Greensboro, NC, who passed away Sept. 22.

He is being remembered fondly by the association for his strong contributions as a leader, mentor, and advocate for the nonwoven industry. INDA, in particular, benefited from Jones’ vast industry and business knowledge as an INDA Executive Committee Appointee for over 20 years. Jones started his career at Burlington Industries in 1977 and was named president and CEO, in 1999 of Precision Fabrics Group Inc., a spin-off of Burlington Industries. Jones was a graduate of the University of Cincinnati and the Wharton School of Finance.

“INDA is saddened by the loss of a true industry leader who devoted his career to advancing the nonwoven & engineered material industry,” said INDA President Tony Fragnito. “Walt Jones will be missed by all of us at INDA and by the many professionals whose careers and businesses were positively impacted by his expertise. We extend our deepest sympathies to his family.”

Two startups in India have won Paint the Future awards and the chance to continue working together with AkzoNobel to accelerate their solutions.

The winning submissions answered the company’s call for innovative ways to enhance the digital consumer experience for Dulux paints in India. The winners are:

• HyperReality Technologies - Collaborative platform for inspiration and visualization of a space in the metaverse
• Fluid AI - Multi-channel, conversational, immersive and interactive AI platform to guide consumers during their painting journey

Having already signed letters of intent to work together on sustainable business opportunities, the two winners now join AkzoNobel’s accelerator program.

The India startup challenge is the third regional edition of Paint the Future. Run in partnership with NASSCOM Industry Partnership Program (NIPP), the challenge attracted 207 submissions from 33 cities across India.

Nine finalists were invited to an intense two-day bootcamp program, where customized sessions with AkzoNobel experts helped them further refine their solution’s value proposition before the final pitch to the Paint the Future jury.

INDA, the Association of the Nonwoven Fabrics Industry, has named government relations and external affairs strategist and advocate Wes Fisher as its new Director of Government Affairs to raise the association’s profile in Washington, D.C. He brings strong liaising skills advancing industries’ interest to regulatory agencies such as the Centers for Disease Control and Prevention, U.S. Department of Agriculture, Food and Drug Administration, and state-level departments.

Most recently, he was senior director of government affairs at the Pet Advocacy Network where he led government relations and legislative strategy for the pet care industry’s national trade association.  Fisher’s background includes providing testimony on hundreds of bills and regulations for associations and creating policy positions, notably on single-use plastics and sustainability.
He has held positions working at the American Legislative Exchange Council and then the National Automatic Merchandising Association where he led state government relations and external affairs for the 1,000-members representing the vending and retail industry.   

At INDA, he will serve as the liaison between the industry and government legislative and regulatory bodies by preparing formal submissions to the federal government articulating industry positions, and representing INDA on the Industry Trade Advisory Committee for Textiles and Apparel (ITAC 12) among other responsibilities in this key position.

Fisher holds a Bachelor’s degree in Political Science from James Madison University in Harrisonburg, VA. He also sits on the board of directors of the Washington Area State Relations Group, and was appointed by the Governor of Virginia to serve on the State Rare Disease Council.

Im Automobilbau, dem Schiffsbau und der Luftfahrtindustrie sowie bei Windenergieanlagen steigen die Materialanforderungen zusehends. Die verwendeten Werkstoffe sollen leicht, ressourcenschonend und gleichzeitig hochbelastbar sein. Faserverstärkte Kunststoffe (Composites) rücken immer mehr in den Vordergrund, da deren Eigenschaften in Kombination mit Glas- oder Carbonfasern metallischen Materialien oftmals überlegen sind. Mit Fokus auf die klimaneutrale Herstellung und Nutzung von Produkten wächst auch der Bedarf an Recyclinglösungen. Im SmartERZ-Projekt TRICYCLE arbeiten Unternehmen gemeinsam an geeigneten skalierbaren und wirtschaftlich tragfähigen Prozessen zum Recycling von Smart Composites. Momentan gibt es dafür keine Anbieter oder Konzepte am Markt.

Smart Composites bestehen aus Werkstoffen, deren Funktionalisierung durch die Integration oder Applikation elektrisch leitfähiger Komponenten, z. B. Sensoren oder Mikroprozessoren, erreicht wird. Dazu zählen zum Beispiel smarte Textilien, die elektronisch wärmen, Lichtsignale geben oder zur Datenübertragung genutzt werden können. Das breite Anwendungsspektrum und die vielseitigen Einsatzgebiete dieser intelligenten Verbundwerkstoffe und Multimaterialverbunde werden perspektivisch zu einem wachsenden Bedarf und einer stärkeren Nachfrage führen.

Die funktionale und vielschichtige Verbindung verschiedener Materialien wie Kunststoff, Metall und Textil wirft beim Thema Recycling Nachhaltigkeitsfragen auf. Im Erzgebirge werden dafür bereits heute Lösungen entwickelt. Im Rahmen des WIR!-Projektes SmartERZ ist das Verbundprojekt TRICYCLE entstanden. Mit dem Fokus auf den Strukturwandel im Erzgebirge haben sich acht ortsansässige Partner aus Wissenschaft und Wirtschaft zusammengetan, um ein Recyclingkonzept aufzustellen und die Grobplanung für ein erzgebirgisches Recycling Center zu entwickeln. Das Ende des Produktlebenszyklus und die Nachnutzung bzw. Wiederaufbereitung stehen dabei im Mittelpunkt des Entwicklungsprozesses. Im Ergebnis sollen effektive und maßgeschneiderte Maßnahmen für eine möglichst hochwertige Wiederverwendung entstehen. Diese sollen dem steigenden Aufkommen an Abfällen aus diesem wachsenden Bereich der deutschen Industrie begegnen und anwendungsbereit sein.

Klassische Herausforderungen für die Projektbeteiligten sind die irreversiblen Verbindungstechniken (z. B. Kleben, Faser-Matrix-Haftung), die Integration vieler verschiedener Materialien in geringen Mengen sowie Form und Größe der Bauteile. Eigene Untersuchungen sowie Feedback von Partnerunternehmen bestätigen die Notwendigkeit sowie den Nutzen eines passgenauen Recyclingprozesses für Smart Composites und intelligente Multimaterialverbünde. Das Projekt soll dazu beitragen, den Wirtschaftsstandort Erzgebirge attraktiver und zukunftsfähiger zu gestalten.

Am 1. September 2021 gestartet, kann TRICYCLE erste Ergebnisse vorweisen. Zunächst wurden die Bedarfe bei mittelständischen Unternehmen in der Region Erzgebirge abgefragt, um die aktuellen Gegebenheiten und den Status quo in Bezug auf technologische Recyclingkonzepte bestmöglich abzubilden. Für ein fundiertes Recyclingkonzept hat das TRICYCLE-Team drei Referenzbauteile für den vorgesehenen Prozess ermittelt, die in der erzgebirgischen Wirtschaft Verwendung finden, und folgenden Bereichen zugeordnet: Automotive, Technische Textilien mit applizierter Zusatzfunktion und Technische Textilien mit integrierter Zusatzfunktion.

Basierend auf dieser Auswahl, analysiert das Projektteam momentan die Herstellungs- und bisherigen Recyclingprozesse der Referenzbauteile. Das beinhaltet auch die Planung praktischer Versuche zum Recycling. Dabei fokussieren sich die Projektpartner auf ihr Know-how in verschiedenen chemischen, thermischen und mechanischen Prozessen zur Separierung, Rückführung und Wiederverwendung der eingesetzten Materialien. Um die Produkte den Recyclingtechnologien zugänglich zu machen, wurde die Herangehensweise innerhalb des Projekts angepasst, da insbesondere Textil aufgrund von Form und Struktur (z. B. endlose Struktur) herausfordernd sein kann.

Obwohl die Materialien selbst recycelbar sind, müssen diese dennoch für den Prozess optimal vorbereitet bzw. fachgerecht aufbereitet werden. Die Expertise und die Technologiekompetenz, die hierfür benötigt werden, ist bei den beteiligten Projektpartnern durch jahrzehntelange Erfahrung und zahlreiche Innovationen vorhanden. Das Zusammenspiel aller Beteiligten im Projekt TRICYCLE stellt bereits jetzt die Weichen für das geplante Recycling Center, um dieses später zum Drehkreuz zwischen regionalen Produktionsunternehmen und dem Recycling weiterzuentwickeln. Dieses soll als „Open Factory“ aufgebaut werden, um den Unternehmen des SmartERZ-Bündnisses bzw. perspektivisch der Region Erzgebirge eine gemeinsame Nutzung zu ermöglichen.

„Die Wiederverwendung der eingesetzten Ressourcen ist sowohl aus ökonomischer als auch aus ökologischer Sicht zwingend geboten. Momentan gibt es weder Anlagenbauer noch Dienstleistungsanbieter mit den entsprechenden Kompetenzen zum Recycling von Smart Composites oder Multimaterialverbünden am Markt,“ stellt Johannes Leis, der Verbundkoordinator vom Sächsischen Textilforschungsinstitut e.V. (STFI) in Chemnitz fest.Unter Leitung des STFI als Verbundkoordinator mit seiner über 30-jährigen Erfahrung in der Textilbranche und speziellem Know-how im Recycling von Carbonabfällen haben sich weitere Unternehmen und Forschungseinrichtungen zusammengefunden. Dazu zählen das Textilunternehmen Curt Bauer GmbH, die Professur Fabrikplanung und Fabrikbetrieb der TU Chemnitz, das Ingenieurbüro Matthias Weißflog, der Hersteller für Faserverbundbauteile Cotesa GmbH, der Spezialvlieshersteller Norafin Industries (Germany) GmbH, das Recyclingunternehmen Becker Umweltdienste GmbH und die Hörmann Rawema Engineering & Consulting GmbH. Am Ende der Projektlaufzeit sollen ein einsatzfähiges, technologisches Recyclingkonzept für die zukünftigen entstehenden smarten Produkte sowie die in der Produktion entstehenden Abfälle (bspw. durch fehlerhafte Bauteile und Randbeschnitte) und ein Konzept für den Aufbau eines Recycling Centers vorliegen, das im Erzgebirge entstehen soll.

Stahl, an active proponent of responsible chemistry, has been awarded the highest EcoVadis Platinum rating, placing it within the top 1% of companies assessed by EcoVadis. The award underlines Stahl’s commitment to collaborating with its partners to reduce its environmental impact and build a more responsible and transparent supply chain.

EcoVadis is a globally recognized evidence-based assessment platform that reviews the performance of more than 90,000 organizations across key sustainability criteria. These include environmental impact, labor and human rights standards, ethics, and sustainable procurement practices. The latest report from EcoVadis highlights Stahl’s positive progress across all these areas and builds on the Gold rating achieved by the company in 2021. Stahl’s 2030 target is to maintain the EcoVadis Platinum rating by working closely with its value-chain partners to help them reduce their environmental impact – including by supporting their transition to renewable feedstocks. In 2021, 80% of Stahl’s total spend on raw materials was supplied by EcoVadis-rated suppliers.
 
The new EcoVadis rating comes as Stahl accelerates its efforts to ensure a more responsible and transparent supply chain. Recent steps toward this goal have included establishing a dedicated Supply Chain Transparency division within the company’s Environmental, social, and governance (ESG) department. The division will be tasked with coordinating a new product development framework that prioritizes the responsible sourcing of raw materials. Furthermore, in July 2022, Stahl submitted a new greenhouse gas (GHG) emissions reduction target, including a specific commitment regarding the company’s Scope 3 upstream emissions. Stahl aims to reduce these by at least 25% over the next 10 years, compared with the base year (2021). Stahl expects to achieve this reduction primarily by working with its suppliers to replace fossil-based raw materials with lower-carbon alternatives.

• Integrated Sustainability Report 2021 – 2022 published

DyStar, a leading specialty chemical company released its twelfth annual Sustainability Performance Report. The report is prepared in accordance with the updated GRI Standards 2021: Core option. DyStar continues to adopt the Integrated Reporting <IR> framework to communicate how the group has successfully created tangible value across multiple stakeholder groups in six major capitals.

DyStar reports that they have inched themselves closer to some of their 2025 target of reducing the environmental footprint by 30% for every ton of product, from 2011 levels. Here are some key highlights for FY2021:

• Recorded more than 29% increase in revenue compared to 2020
• Zero workplace fatalities, high-consequence injuries, and work-related ill health
• 40% reduction in Greenhouse gas (GHG) emission intensity, compared to 2011
• 37% decrease in wastewater emission intensity, compared to 2011

The Group was able to remain resilient and steer itself toward optimistic growth and recovery from the global pandemic in FY2021. In face of recent geopolitical events and macroeconomic factors such as soaring energy costs, DyStar and the wider supply chain will continue to face challenges. As a result, the company believes it is crucial to stay committed to their 2025 Sustainability goals to continue generating value for all stakeholders in the longer term, well beyond these turbulent times.

The report communicates DyStar’s progress towards its sustainability agenda and material topics. As part of our commitment to environmental sustainability, only an e-magazine and a PDF version will be made available for download from www.DyStar.com/sustainability-reports/