From the Sector

Reset
115 results
INDA: Clean Advocacy Summit in Washington D.C. (c) INDA
19.04.2024

INDA: Clean Advocacy Summit in Washington D.C.

INDA held an Advocacy Summit in Washington, D.C. in partnership with ISSA’s, The Worldwide Cleaning Industry Association, 2024 Clean Advocacy Summit. Over the course of two days, INDA members took to the nation’s capital to convene, connect, and advocate for issues important to the nonwovens industry, meeting with the staff and elected officials in over a dozen congressional offices.  

A key focus of these congressional meetings was education and support for the passage of the WIPPES Act (H.R.2964 / S.1350), the federal effort to implement consistent national Do Not Flush Labeling standards for non-flushable wipes. They also advocated for the renewal of the Miscellaneous Tariff Bill to provide tariff relief on items without domestic production as well as discussed various trade policy issues.

INDA held an Advocacy Summit in Washington, D.C. in partnership with ISSA’s, The Worldwide Cleaning Industry Association, 2024 Clean Advocacy Summit. Over the course of two days, INDA members took to the nation’s capital to convene, connect, and advocate for issues important to the nonwovens industry, meeting with the staff and elected officials in over a dozen congressional offices.  

A key focus of these congressional meetings was education and support for the passage of the WIPPES Act (H.R.2964 / S.1350), the federal effort to implement consistent national Do Not Flush Labeling standards for non-flushable wipes. They also advocated for the renewal of the Miscellaneous Tariff Bill to provide tariff relief on items without domestic production as well as discussed various trade policy issues.

The advocacy summit portion of the event included panels on Wipes Policy, consumer education, international trade, plastics, and PFAS. Speakers included Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative for Textiles, James Willett, International Economist for the International Trade Administration, Sarah Sapirstein, federal lobbyist for the California Association of Sanitation Agencies, Lara Wyss, President of the Responsible Flushing Alliance, Jason Eberstein of the Plastics Industry Association, and Shawn Swearingen of the American Chemistry Council.

More information:
INDA ISSA wipes USA
Source:

INDA, the Association of the Nonwoven Fabrics Industry

HeiQ: Anti-odor technology for feather and down products Photo HeiQ
18.04.2024

HeiQ: Anti-odor technology for feather and down products

HeiQ introduces an anti-odor product addition to its HeiQ Fresh range to eliminate persistent malodor on feather and down products. Biobased HeiQ Fresh for Feather & Down utilizes a combination of pre- and probiotics (synbiotics) which helps to break up the smelly components. This innovation will be showcased at the Techtextil 2024 Swiss Pavilion.

HeiQ Fresh for Feather & Down is a 100% biobased technology engineered to combat the persistent malodor often associated with feather jackets, duvets, and pillows. Developed to address a common challenge faced by manufacturers and consumers alike, this solution represents a leap forward in the field of odor management by removing a significant objection to purchase.

The key issue lies in the natural oil secretion of the duck or goose to provide its natural waterproofing. While essential, this oil becomes the source of the unwanted odors that persist despite conventional cleaning methods. HeiQ Fresh for Feather & Down tackles this problem head-on by harnessing the power of synbiotics (pre- and probiotics).

HeiQ introduces an anti-odor product addition to its HeiQ Fresh range to eliminate persistent malodor on feather and down products. Biobased HeiQ Fresh for Feather & Down utilizes a combination of pre- and probiotics (synbiotics) which helps to break up the smelly components. This innovation will be showcased at the Techtextil 2024 Swiss Pavilion.

HeiQ Fresh for Feather & Down is a 100% biobased technology engineered to combat the persistent malodor often associated with feather jackets, duvets, and pillows. Developed to address a common challenge faced by manufacturers and consumers alike, this solution represents a leap forward in the field of odor management by removing a significant objection to purchase.

The key issue lies in the natural oil secretion of the duck or goose to provide its natural waterproofing. While essential, this oil becomes the source of the unwanted odors that persist despite conventional cleaning methods. HeiQ Fresh for Feather & Down tackles this problem head-on by harnessing the power of synbiotics (pre- and probiotics).

Through an advanced process, the technology applied during the production stage effectively removes bacterial nutrients present in the feathers and down, thereby preventing the formation of persistent and unpleasant odors. Extensive testing has demonstrated a significant reduction in malodor even after prolonged use, validating the efficacy of this solution. The human sensory testing method according to ISO 17299-1 is the recommended test method.

More information:
HeiQ odor control down and feathers
Source:

HeiQ

Collaboration between Archroma and DMIx (c) ColorDigital
16.04.2024

Collaboration between Archroma and DMIx

Archroma and ColorDigital GmbH, a company in textile supply chain digitalization, are joining forces to bring the library of engineered color standards to the DMIx ecosystem of fashion brands and suppliers.

All 5,760 color references in the Color Atlas by Archroma® will be integrated into ColorDigital’s DMIx interactive collaboration platform, enabling brands to embrace almost unlimited color creativity with an assurance of color precision. Based on digital twin technology, the DMIx solution ensures that color choices are aligned across design, sourcing and production, reducing sampling costs and collection development time as well as improving color accuracy and end-product quality. DMIx marks a significant step forward in enhancing color management processes for both digital product creation (DPC) and physical production.

Archroma and ColorDigital GmbH, a company in textile supply chain digitalization, are joining forces to bring the library of engineered color standards to the DMIx ecosystem of fashion brands and suppliers.

All 5,760 color references in the Color Atlas by Archroma® will be integrated into ColorDigital’s DMIx interactive collaboration platform, enabling brands to embrace almost unlimited color creativity with an assurance of color precision. Based on digital twin technology, the DMIx solution ensures that color choices are aligned across design, sourcing and production, reducing sampling costs and collection development time as well as improving color accuracy and end-product quality. DMIx marks a significant step forward in enhancing color management processes for both digital product creation (DPC) and physical production.

Sustainability is an essential factor for both Archroma and DMIx. Colors in the Archroma Color Atlas are formulated to comply with leading eco-standards while also delivering consistent and accurate color reproduction. This complements the DMIx ImpAct approach, which provides data on the environmental impact of raw materials to enable brands to select inputs that meet their sustainability targets.

A new feature on the DMIx platform is DMIx eXcite, an inspirational material and color-trend hub that uses interactive moodboards to share new color and material scenarios ahead of each season. Designers and colorists will be able to directly use colors presented in the eXcite trend reports, including colors from the Color Atlas by Archroma®, across the DMIx color and 3D technology tools.

Source:

Archroma

18.03.2024

Solvay: Full-year 2023 results

  • Solvay’s FY 2023 financial statements reflect the Partial Demerger completed on December 9, 2023, with the Specialty businesses transferred to Syensqo classified as discontinued operations for 2023.
  • New Solvay leadership team committed to drive the transformation of the company.
  • Net sales for the full year 2023 at €4,880 million were down -12.6% organically versus 2022, driven primarily by volume declines. In Q4, net sales decreased organically by -18.9% from both lower volumes and prices.
  • Underlying EBITDA of €1,246 million for the full year 2023 was stable (+0.2%) on an organic basis compared to a record 2022, with positive Net Pricing and lower fixed costs offsetting the drop in volumes. EBITDA in the fourth quarter was down -24.5% organically vs Q4 2022, fully driven by lower volumes, with variable costs reduction offsetting price erosion, while fixed costs decreased slightly.
  • Underlying net profit from continuing operations was €588 million in 2023 compared to €740 million in 2022.
  • Free Cash Flow of €561 million in 2023 (+17.3% vs.
  • Solvay’s FY 2023 financial statements reflect the Partial Demerger completed on December 9, 2023, with the Specialty businesses transferred to Syensqo classified as discontinued operations for 2023.
  • New Solvay leadership team committed to drive the transformation of the company.
  • Net sales for the full year 2023 at €4,880 million were down -12.6% organically versus 2022, driven primarily by volume declines. In Q4, net sales decreased organically by -18.9% from both lower volumes and prices.
  • Underlying EBITDA of €1,246 million for the full year 2023 was stable (+0.2%) on an organic basis compared to a record 2022, with positive Net Pricing and lower fixed costs offsetting the drop in volumes. EBITDA in the fourth quarter was down -24.5% organically vs Q4 2022, fully driven by lower volumes, with variable costs reduction offsetting price erosion, while fixed costs decreased slightly.
  • Underlying net profit from continuing operations was €588 million in 2023 compared to €740 million in 2022.
  • Free Cash Flow of €561 million in 2023 (+17.3% vs. €479 million in 2022) resulting in a record FCF conversion ratio of 45.4%, thanks to the strong EBITDA performance and to the positive impact from working capital variation.
  • ROCE was 20.4% in 2023, -2.5pp compared to 2022 as a result of lower profit.
  • Solid balance sheet at the end of December 2023, in line with the target capital structure announced in November 2023, with an underlying net debt of €1.5 billion, which translates into a leverage ratio of 1.2x.
  • Total proposed gross dividend of €2.43 per share, subject to shareholders’ approval during the next Ordinary General Meeting of May 28, 2024.
  • Solvay continues to reduce its GHG emissions (-19% vs 2021, scope 1 and 2).
  • 2024 Outlook: Organic growth of the underlying EBITDA of -10% to -20% compared to restated 2023; Free cash flow of minimum €260 million

2024 outlook
Across its product portfolio, Solvay expects current demand levels to continue over the next few months and, as such, expects H1 2024 volumes to be broadly in line with H2 2023. At this point, there is little visibility on the second half of the year, however there are signs that the trend in the second half could improve. Solvay expects Soda Ash prices over FY 2024 to be lower than FY 2023, consistent with the current market environment, which will affect the business margin in 2024. Pricing trends across Solvay’s other businesses are forecasted to be more resilient year on year.

Lower energy and raw materials prices should offset some of the negative pressure on the topline. More importantly, Solvay has started to implement cost savings initiatives that will start to deliver results in 2024.

For full year 2024, Solvay expects an organic growth of the underlying EBITDA by -10% to -20% versus a high comparison base in 2023, especially in H1. This translates into a range of €925 million to €1,040 million at a 1.10 EUR/USD exchange rate.

The organic growth of the underlying EBITDA is calculated from a 2023 restated figure of €1,154 million (vs a reported figure of €1,246 million).

Free cash flow to Solvay shareholders from continuing operations is expected to be greater than €260 million, in line with the cash usage prioritization presented during the Capital Market Day in November 2023. It is supported by Solvay’s ability to manage its capex and working capital to ensure the financing of its businesses and the payment of dividends while keeping the strength of its balance sheet intact.

Solvay remains committed to implement its strategic roadmap and reconfirms its 2028 targets as communicated at the Capital Markets Day of November 2023.

Source:

Solvay

15.03.2024

TMAS: Digitised solutions at Techtextil and Texprocess

Members of TMAS – the Swedish textile machinery association – will display technologies in alignment with the theme of digitalisation at the forthcoming Techtextil and Texprocess 2024 exhibitions, taking place in Frankfurt from April 23-26th.

Automatic handling
The fully automated and digitised handling solutions for finished garments, home textiles and furniture of Eton Systems, for example, will be demonstrated at Texprocess.

Designed to increase value-added time in production by eliminating manual transportation and minimising handling, the individually addressable product carriers are fully managed and controlled by the latest ETONingenious™ software. This web based real-time data collection and information system continuously accumulates, processes and makes all production information instantly available to supervisors, quality control personnel and management.

Members of TMAS – the Swedish textile machinery association – will display technologies in alignment with the theme of digitalisation at the forthcoming Techtextil and Texprocess 2024 exhibitions, taking place in Frankfurt from April 23-26th.

Automatic handling
The fully automated and digitised handling solutions for finished garments, home textiles and furniture of Eton Systems, for example, will be demonstrated at Texprocess.

Designed to increase value-added time in production by eliminating manual transportation and minimising handling, the individually addressable product carriers are fully managed and controlled by the latest ETONingenious™ software. This web based real-time data collection and information system continuously accumulates, processes and makes all production information instantly available to supervisors, quality control personnel and management.

Bespoke seams
Svegea will demonstrate its EC 300-XS colarette technology, which is used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

The EC 300-XS collarette cutter on show in Frankfurt is equipped with the latest E-Drive II system providing the operator with a very user-friendly touchscreen, providing full control of the cutting process. An accompanying FA 350 fully automatic roll slitting machine will also be demonstrated.

Digital finishing
At Techtextil meanwhile, Baldwin Technology Co. will provide full details of how its highly digitised TexCoat G4 non-contact spray technology for textile finishing and remoistening not only reduces water, chemicals and energy consumption, but also provides the flexibility to adapt to customer requirements in terms of single and double-sided finishing applications.

TexCoat G4 can reduce water consumption and chemical usage by as much as 50% compared to traditional padding application processes.

Yarn tension
Celebrating its 60th anniversary this year, Eltex will display the latest Eltex EyETM system for the continuous monitoring of yarn tension on warp beams.

The Eltex EyETM eliminates problems when warping, and also in subsequent weaving or tufting processes, monitoring the yarn tension on all positions in real-time and enabling a minimum and maximum allowable tension value it be set. If any yarn’s tension falls outside these values the operator can be warned or the machine stopped.

The Eltex ACT and ACT-R units meanwhile go beyond yarn tension monitoring to actually control yarn tension. This extends the application range greatly. The plug and play system automatically compensates for any differences in yarn tension that arise, for example from irregularities in yarn packages.

Accumulated know-how
Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

The company will present its latest X4 yarn feeders with integrated accessory displays (TED) as a new standard, as well as launching its own e-commerce platform – iroonline.com.

The TED function enables weft tension settings to be transferred from one machine to another, enabling a fast start-up the next time the same article is woven. The position of the S-Flex Tensioner is constantly monitored by an internal sensor – even if adjustment is made during power off.

X4 feeders are also available with integrated active tension control (ATC-W) as an option. With the ATC-W active tension control, the required tension is easily set and monitored on the integrated display. Once set, the system constantly regulates itself, ensuring consistent yarn tension during the weaving process which is constantly and accurately measured by the ATC sensor unit, sending a signal to the ATC operator unit resulting in consistently stable yarn tension at the required level.

Source:

TMAS - Swedish textile machinery association

Baldwin presents spray finishing system at Techtexil (c) Baldwin Technology Company Inc.
13.03.2024

Baldwin presents spray finishing system at Techtexil

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

With Baldwin’s system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.
 
Furthermore, the system offers automated speed tracking, fabric-width compensation, and real-time monitoring to track system uptime, performance and chemistry usage, as well as active care alerts.
 
In addition, the TexCoat™ G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water repellents, softeners, antimicrobials, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, and no special auxiliaries are required. The recipe is adjusted by increasing the concentration and reducing the pickup by a corresponding amount, so that the same level of solids is applied.
 
Some applications, such as durable water repellents, are only applied on the face of the fabric, instead of the traditional method of saturation through dipping and squeezing. Drier fabric entering the stenter means lower drying temperatures and faster process speeds. Single-side applications also open up the opportunity to process back-coated or laminated fabrics in a single pass of the stenter, instead of two passes.

19.02.2024

Lectra: Financial statements for 2023

  • Revenues: 477.6 million euros (-6%)
  • EBITDA before non-recurring items: 79.0 million euros (-15%)
  • Net income: 32.6 million euros (-26%)
  • Free cash flow before non-recurring items: 45.3 million euros
  • Dividend: €0.36 per share

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the fiscal year 2023. Audit procedures have been performed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 3.9 million euros (-3%) and 1.7 million euros (-8%) respectively in Q4, and by 11.2 million euros (-2%) and 4.8 million euros (-6%) respectively in the year, at actual exchange rates compared to like-for-like figures.

  • Revenues: 477.6 million euros (-6%)
  • EBITDA before non-recurring items: 79.0 million euros (-15%)
  • Net income: 32.6 million euros (-26%)
  • Free cash flow before non-recurring items: 45.3 million euros
  • Dividend: €0.36 per share

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the fiscal year 2023. Audit procedures have been performed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 3.9 million euros (-3%) and 1.7 million euros (-8%) respectively in Q4, and by 11.2 million euros (-2%) and 4.8 million euros (-6%) respectively in the year, at actual exchange rates compared to like-for-like figures.

OUTLOOK
While the 2023 full-year results were affected by the adverse environment, they also attest to the substantial improvement in the fundamentals of the Group's business model, which will have a positive impact on 2024 results. Persistent macroeconomic and geopolitical uncertainties could nevertheless continue to weigh on investment decisions by the Group's customers.

While the most recent indicators seem to suggest that the situation is unlikely to deteriorate further, the timing and magnitude of a rebound in new system orders remain uncertain.

Outlook for 2024
To facilitate analysis, the accounts of Lectra excluding the Launchmetrics acquisition ("Lectra 2023 Scope") will be analysed separately from the Launchmetrics accounts in 2024.

The Group has based its 2024 objectives on the exchange rates in effect on December 29, 2023, in particular $1.10/€1. When converting 2023 results using the exchange rates retained for 2024, 2023 revenues are mechanically reduced by 4.7 million euros (to 472.9 million euros) and 2023 EBITDA before non-recurring items is reduced by 2.2 million euros (to 76.8 million euros). Thus, for the Lectra 2023 Scope, the comparisons between 2024 and 2023 printed below are based on constant exchange rates.

At this early stage of 2024, continuing low visibility regarding orders and revenues from new systems makes it impossible to predict the actual timing and scale of the future rebound in this area. On the other hand, visibility is high for recurring revenues, which accounted for 68% of total revenues in 2023 and will continue to grow in 2024.

In light of the above, Lectra has set as its objective for 2024, for the Lectra 2023 Scope, to achieve revenues in the range of 480 to 530 million euros (+2% to +12%) and EBITDA before non-recurring items in the range of 85 to 107 million euros (+10% to +40%).

The low end of the revenues range is based on the absence of a rebound in new systems orders, which would remain stable in 2024 relative to 2023, with a 6% decline in revenues from perpetual software licenses, equipment and accompanying software and non-recurring services, as the order backlog was lower on December 31, 2023 than a year before.

The high end of the revenues range reflects a gradual rebound in new systems orders, which at year-end 2024 would be back to year-end 2022 level.
 
In addition, Launchmetrics revenues (for the consolidation period from January 23 to December 31) are projected to be in the range of 42 to 46 million euros, with an EBITDA margin before non-recurring items of more than 15% (assuming an exchange rate of $1.10/€1).

silk Bild: LoggaWiggler, Pixabay
15.02.2024

Haelixa and Trudel Silk: New Partnership

Haelixa, the trailblazer of physical traceability solutions, has partnered with Trudel Silk, a market leader for sustainable organic and recycled silk products. This collaboration brings traceability and transparency to silk production.

Silk is one of the finest and smoothest fabrics; the better the quality of the silk, the more luxurious it feels to the touch. To create the best quality silk, the conditions for mulberry cultivation must be up to the highest standards. A healthy micro-ecosystem in the fields translates to top-grade silk cocoon quality. At Trudel, this is the environment they have created for the vertical integration of their business. Trudel aims to succeed at every stage of the process, which can only be accomplished through the active involvement and visible cooperation of all market players. These players include farmers, reeling mills, twisting/spinning mills, weaving mills, dyeing and printing mills, and brands. They are involved in every step, from the cultivation of mulberry trees to the production of silk fabrics.

Haelixa, the trailblazer of physical traceability solutions, has partnered with Trudel Silk, a market leader for sustainable organic and recycled silk products. This collaboration brings traceability and transparency to silk production.

Silk is one of the finest and smoothest fabrics; the better the quality of the silk, the more luxurious it feels to the touch. To create the best quality silk, the conditions for mulberry cultivation must be up to the highest standards. A healthy micro-ecosystem in the fields translates to top-grade silk cocoon quality. At Trudel, this is the environment they have created for the vertical integration of their business. Trudel aims to succeed at every stage of the process, which can only be accomplished through the active involvement and visible cooperation of all market players. These players include farmers, reeling mills, twisting/spinning mills, weaving mills, dyeing and printing mills, and brands. They are involved in every step, from the cultivation of mulberry trees to the production of silk fabrics.

Haelixa and Trudel have collaborated to improve silk’s robust and consistent traceability. As the demand for validation of the silk value chain increases, they have partnered with groups from Italy and Asia to develop a unique solution that uses DNA markers to trace the entire supply chain of silk production. This innovative approach ensures each silk product’s ethical sourcing.

The silk fibers used in their spun silk yarns are marked with a specific DNA per farm set selected by Trudel. Throughout the supply chain, samples of yarn, fabrics, and finished products undergo testing to verify the presence of original silk fibers. Based on the reporting, the brand can trace the finished accessories or garments to Trudel.

 

More information:
Haelixa Silk Road DNA marker
Source:

Haelixa

07.02.2024

Rieter wins Patent Dispute in China

In a judgment in December 2023, the Supreme People’s Court of the People’s Republic of China ruled in favor of Rieter in a legal dispute. The case concerned the infringement of a Rieter patent by a competitor’s draw frame. Rieter protects its innovations with patents and registered designs and consistently takes action against infringements of its intellectual property.

Rieter draw frames are known for their stable operation with high sliver quality and productivity. Scanning precision and autoleveling dynamics ensure outstanding sliver evenness and thus the production of high-quality yarns. Draw frames have also been the subject of a patent litigation by Rieter in China at various levels of jurisdiction. Rieter had sued a competitor for unauthorized use of its patented draw frame technology.

In the summer of 2022, the Shanghai Intellectual Property Court confirmed the patent infringement identified by Rieter and prohibited the accused competitor from continuing to use Rieter’s patented technology. The infringing party was also ordered to pay damages to Rieter.

In a judgment in December 2023, the Supreme People’s Court of the People’s Republic of China ruled in favor of Rieter in a legal dispute. The case concerned the infringement of a Rieter patent by a competitor’s draw frame. Rieter protects its innovations with patents and registered designs and consistently takes action against infringements of its intellectual property.

Rieter draw frames are known for their stable operation with high sliver quality and productivity. Scanning precision and autoleveling dynamics ensure outstanding sliver evenness and thus the production of high-quality yarns. Draw frames have also been the subject of a patent litigation by Rieter in China at various levels of jurisdiction. Rieter had sued a competitor for unauthorized use of its patented draw frame technology.

In the summer of 2022, the Shanghai Intellectual Property Court confirmed the patent infringement identified by Rieter and prohibited the accused competitor from continuing to use Rieter’s patented technology. The infringing party was also ordered to pay damages to Rieter.

The culpable competitor then appealed the decision of the Shanghai court to the Supreme People’s Court of the People’s Republic of China.

In December 2023, the Supreme Court of China in Beijing upheld the Shanghai decision, confirming that the patent had been infringed. As a result, Rieter’s competitor is prohibited from selling the infringing machine types and is required to pay the damages determined by the court.

This Supreme Court decision represents a major success for Rieter in defending its proprietary technologies in China. It is further proof that foreign companies can effectively defend their intellectual property in China.

As the technology leader in spinning machinery manufacturing, Rieter invests around 5% of its turnover annually in research and development. Rieter protects its innovative products with patents and registered designs and takes consistent action against infringements of industrial property rights.

More information:
legal dispute patent China
Source:

Rieter AG

26.01.2024

Lenzing: Impairment requirements (EBIT) for the financial year 2023

  • EBITDA of around EUR 300 million expected for 2023
  • Non-cash impairment losses of up to EUR 480 million
  • Implementation of the performance program fully on track

The annual valuation of assets in accordance with IFRS for the entire Lenzing Group both nationally in Austria and internationally, has resulted in a projected asset impairment of up to EUR 480 million for the 2023 financial year.1 The reasons for the impairment requirements are, on the one hand, continued uncertainties in the economic environment and, on the other hand, still increased raw material and energy costs as well as a higher interest rate environment.

The impairment losses are non-cash effective and have no impact on the full-year EBITDA for 2023, but do affect EBIT for the 2023 financial year. The Managing Board is specifying the previous earnings forecast for the 2023 financial year (EBITDA: EUR 270 – 330 million) and expects an EBITDA of around EUR 300 million.

  • EBITDA of around EUR 300 million expected for 2023
  • Non-cash impairment losses of up to EUR 480 million
  • Implementation of the performance program fully on track

The annual valuation of assets in accordance with IFRS for the entire Lenzing Group both nationally in Austria and internationally, has resulted in a projected asset impairment of up to EUR 480 million for the 2023 financial year.1 The reasons for the impairment requirements are, on the one hand, continued uncertainties in the economic environment and, on the other hand, still increased raw material and energy costs as well as a higher interest rate environment.

The impairment losses are non-cash effective and have no impact on the full-year EBITDA for 2023, but do affect EBIT for the 2023 financial year. The Managing Board is specifying the previous earnings forecast for the 2023 financial year (EBITDA: EUR 270 – 330 million) and expects an EBITDA of around EUR 300 million.

Stephan Sielaff, Chief Executive Officer of the Lenzing Group: “In the third quarter of 2023, we responded to the persistently difficult market environment and launched a comprehensive performance program, which we have been consistently implementing since then with a focus on positive free cash flow and stronger sales and margin growth. We can therefore confirm our earnings forecast with an EBITDA of around EUR 300 million. The valuation adjustment in accordance with IFRS does not change the strategic orientation of the Lenzing Group.”

Nico Reiner, Chief Financial Officer, adds: “The implementation of the performance program is going according to plan. In the future, cost measures alone are expected to contribute more than EUR 100 million to earnings annually, of which more than EUR 50 million will already be effective for the 2024 financial year. We are on target, particularly in terms of strengthening free cash flow, and we also achieved positive free cash flow in the fourth quarter. The revaluation of assets is now consistent and the right step for the future direction.”

The 2023 annual results will be presented on March 15, 2024.
 

1 Subject to potential changes resulting from the ongoing financial audit

Source:

Lenzing AG

24.01.2024

ECHA: Hazardous chemicals found in coating products and polymers

The European Chemicals Agency (ECHA) has added five new chemicals to the Candidate List. One of them is toxic for reproduction, three are very persistent and very bioaccumulative and one is toxic for reproduction and persistent, bioaccumulative and toxic. They are found in products such as inks and toners, adhesives and sealants and washing and cleaning products.

The Agency has also updated the existing Candidate List entry for dibutyl phthalate to include its endocrine disrupting properties for the environment.

ECHA’s Member State Committee has confirmed the addition of these substances to the Candidate List. The list now contains 240 entries – some are groups of chemicals so the overall number of impacted chemicals is higher.

 

The European Chemicals Agency (ECHA) has added five new chemicals to the Candidate List. One of them is toxic for reproduction, three are very persistent and very bioaccumulative and one is toxic for reproduction and persistent, bioaccumulative and toxic. They are found in products such as inks and toners, adhesives and sealants and washing and cleaning products.

The Agency has also updated the existing Candidate List entry for dibutyl phthalate to include its endocrine disrupting properties for the environment.

ECHA’s Member State Committee has confirmed the addition of these substances to the Candidate List. The list now contains 240 entries – some are groups of chemicals so the overall number of impacted chemicals is higher.

 

Source:

European Chemicals Agency

Stella McCartney X B&B Italia: Launch of iconic sofa system (c) B&B Italia
08.01.2024

Stella McCartney X B&B Italia: Launch of iconic sofa system

B&B Italia unveiled a special edition Camaleonda, the iconic sofa system by Mario Bellini, adorned in a brand-new fabric designed by Stella McCartney – platforming her S-Wave monogram. Marking the second chapter of the partnership between the British conscious luxury pioneer and the Italian design house, the collaboration was launched at Art Basel Miami Beach on 6th December 2023 as part of an installation at B&B Italia Design Studio’s grand opening. The Camaleonda is crafted from nearly entirely sustainable materials, materialising both brands’ nature-positive visions.

The partnership between B&B Italia and Stella McCartney was born of Stella’s long-time personal passion for Bellini’s works and started in 2022 with the Le Bambole armchair. It evolves now with the new version of Camaleonda, the sofa system originally designed in 1970, which made its comeback 50 years later in 2020 - speaking a contemporary language between structural solutions and sustainable choices.

B&B Italia unveiled a special edition Camaleonda, the iconic sofa system by Mario Bellini, adorned in a brand-new fabric designed by Stella McCartney – platforming her S-Wave monogram. Marking the second chapter of the partnership between the British conscious luxury pioneer and the Italian design house, the collaboration was launched at Art Basel Miami Beach on 6th December 2023 as part of an installation at B&B Italia Design Studio’s grand opening. The Camaleonda is crafted from nearly entirely sustainable materials, materialising both brands’ nature-positive visions.

The partnership between B&B Italia and Stella McCartney was born of Stella’s long-time personal passion for Bellini’s works and started in 2022 with the Le Bambole armchair. It evolves now with the new version of Camaleonda, the sofa system originally designed in 1970, which made its comeback 50 years later in 2020 - speaking a contemporary language between structural solutions and sustainable choices.

The brand-new Stella McCartney X B&B Italia Camaleonda introduces the latest printed fabric “S-Wave”, which is the result of a next-generation sustainability innovation introduced by the design company’s R&D team. The S-Wave upholstery, available in two different colours, is based on OceanSafe naNea yarn, which is verified to be biodegradable, Cradle to Cradle Certified® Gold and does not contain harmful substances. The material does not shed persistent microplastics into the environment, however, performs like conventional materials.

Source:

B&B Italia

04.01.2024

The climate-friendly carbon fiber - up to 50% less CO2 emissions

SGL Carbon relies on climate-friendly manufacturing processes in the production of its own carbon fibers. By using renewable energy, the carbon footprint of SGL fiber can be reduced by up to 50% compared to a conventional fiber.  

SGL carbon fiber is produced at the Lavradio (Portugal) and Moses Lake (USA) sites. When the Moses Lake site was selected in the 1990s, the use of hydropower as an energy source played a particularly decisive role. As a result, around 75,000 tonnes of CO2 can be saved in Moses Lake by purchasing electricity from hydropower plants compared to a fossil fuel-based electricity mix.

As part of the consistent implementation of its climate strategy, SGL Carbon will be using a CO2-neutral biomass system to generate energy from the beginning of 2024, which will make the production system, which was previously based on natural gas, more flexible and climate-friendly. At full capacity, the biomass system in Lavradio can save more than 90,000 tons of CO2.

The raw material used is wood pellets, which are sourced from a radius of 250 kilometres via short transport routes.

SGL Carbon relies on climate-friendly manufacturing processes in the production of its own carbon fibers. By using renewable energy, the carbon footprint of SGL fiber can be reduced by up to 50% compared to a conventional fiber.  

SGL carbon fiber is produced at the Lavradio (Portugal) and Moses Lake (USA) sites. When the Moses Lake site was selected in the 1990s, the use of hydropower as an energy source played a particularly decisive role. As a result, around 75,000 tonnes of CO2 can be saved in Moses Lake by purchasing electricity from hydropower plants compared to a fossil fuel-based electricity mix.

As part of the consistent implementation of its climate strategy, SGL Carbon will be using a CO2-neutral biomass system to generate energy from the beginning of 2024, which will make the production system, which was previously based on natural gas, more flexible and climate-friendly. At full capacity, the biomass system in Lavradio can save more than 90,000 tons of CO2.

The raw material used is wood pellets, which are sourced from a radius of 250 kilometres via short transport routes.

The climate-friendly energy supply at the site in Moses Lake (USA) combined with the new biomass plant in Lavradio (Portugal) lead to a reduction in CO2 emissions of up to 50% in the production of SGL's own carbon fibers compared to conventional fibers. With the investment in the biomass system, SGL Carbon is pursuing its climate strategy. The target is to save 50% CO2 emissions by the end of 2025 compared to the base year 2019 and to be climate-neutral by the end of 2038. In the period 2019 to 2022, SGL Carbon has reduced its CO2 emissions by 17%.

Source:

SGL Carbon SE

HeiQ Skin Care Photo HeiQ
21.11.2023

HeiQ launches a probiotics infused textile technology

HeiQ introduces a 100% biobased and long-lasting cosmetic finishing technology for textiles to the market. The newest addition to the HeiQ portfolio harnesses the power of active probiotics and selected prebiotics to enhance the skin microbiome, turning the human’s largest organ into the best-looking one.

HeiQ Skin Care is a synbiotic textile finish aimed at providing a balanced microbiome for glowing skin, even after repeated use and washing of textiles. Unlike conventional products, HeiQ Skin Care utilizes slow-release prebiotics and probiotics seamlessly integrated into a biobased textile matrix, enriching the skin's microbiome diversity, and offering long-lasting cosmetic benefits.

The synergistic combination of prebiotics and probiotics, known as synbiotics, delivers a soothing cosmetic skin treatment while relaxing, working, or sleeping. Probiotics not only restore and improve the skin's natural balance but also enhance its self-repair capabilities. Synbiotics promote skin renewal, rebalancing, and improved appearance, reducing the signs of aging and establishing a favorable environment for the skin's natural repair mechanisms.

HeiQ introduces a 100% biobased and long-lasting cosmetic finishing technology for textiles to the market. The newest addition to the HeiQ portfolio harnesses the power of active probiotics and selected prebiotics to enhance the skin microbiome, turning the human’s largest organ into the best-looking one.

HeiQ Skin Care is a synbiotic textile finish aimed at providing a balanced microbiome for glowing skin, even after repeated use and washing of textiles. Unlike conventional products, HeiQ Skin Care utilizes slow-release prebiotics and probiotics seamlessly integrated into a biobased textile matrix, enriching the skin's microbiome diversity, and offering long-lasting cosmetic benefits.

The synergistic combination of prebiotics and probiotics, known as synbiotics, delivers a soothing cosmetic skin treatment while relaxing, working, or sleeping. Probiotics not only restore and improve the skin's natural balance but also enhance its self-repair capabilities. Synbiotics promote skin renewal, rebalancing, and improved appearance, reducing the signs of aging and establishing a favorable environment for the skin's natural repair mechanisms.

A second skin that takes care of the first
The skin, the largest organ in human body, is home to a diverse community of microorganisms called the skin microbiome. It plays a crucial role in maintaining good skin condition, acting as a protective barrier against harmful agents. However, various factors, such as hormones, diet, smoking, environmental exposures, and excessive UV radiation, can disrupt its balance, leading to skin conditions like rashes, acne, psoriasis, rosacea, skin irritation, redness, eczema, and odor. Maintaining a balanced skin microbiome is essential for preserving skin integrity.

HeiQ Skin Care is suitable for all textile fibers, both natural and synthetic, and can be applied to all textile items that come in direct contact with the skin. This versatility makes it an ideal choice for daily use- at work, during sports, leisure activities, or as bedding items like bed sheets and pillows.

Intensive wear trials conducted during the development stage have proven the consistent release of synbiotics (prebiotics and probiotics) onto the skin, creating conditions to foster a well-balanced microbiome.

 

Source:

HeiQ

06.10.2023

Accelerating Circularity launches Alliance of Chemical Textile Recycling (ACTR) with key members

The mission of Accelerating Circularity is to create new supply chains and business models to turn textile waste into mainstream raw materials. Accelerating Circularity has created a working group, the Alliance of Textile Chemical Recyclers (ACTR), to meet and address the textile industry with a common voice to facilitate accurate information on textile chemical recycling.

“We formed this collective to move chemical recycling technology forward, share common definitions, and address policies in a collaborative way to maximize the elimination of textile waste to landfills and incineration” explained Karla Magruder, Founder and President of Accelerating Circularity. “Chemical recycling technology has many benefits, including quality more similar to virgin fiber and the ability to recycle multiple times.”

ACTR plans to provide the industry with information on how textile chemical recycling can:

The mission of Accelerating Circularity is to create new supply chains and business models to turn textile waste into mainstream raw materials. Accelerating Circularity has created a working group, the Alliance of Textile Chemical Recyclers (ACTR), to meet and address the textile industry with a common voice to facilitate accurate information on textile chemical recycling.

“We formed this collective to move chemical recycling technology forward, share common definitions, and address policies in a collaborative way to maximize the elimination of textile waste to landfills and incineration” explained Karla Magruder, Founder and President of Accelerating Circularity. “Chemical recycling technology has many benefits, including quality more similar to virgin fiber and the ability to recycle multiple times.”

ACTR plans to provide the industry with information on how textile chemical recycling can:

  • offer solutions for diverting textile waste to landfill
  • enable textile to textile recycling versus incineration/landfill
  • provide sustainably sourced/circular materials
  • support brand/retailers/producers in achieving their CO2 reduction targets
  • provide long term price stability and consistent supply of raw materials versus virgin

Members of the Alliance include founding members Eastman, Lenzing, and The LYCRA Company, as well as key innovators Circ®, Sappi, Renewcell, Infinited fiber, Worn Again Technologies, Gr3n, CuRe Technology, and OnceMore® from Sodra.

As a first step, the ACTR (Alliance of Chemical Textile Recycling) is introducing a dictionary of common terms developed to educate the industry on the chemical recycling of textiles.

ANDRITZ: Extra-wide carding machine for Italian nonwovens producer (c) ANDRITZ
From left to right: Mr. Gianni Boscolo, CEO of Albis, and Mr. Fabien Ravier, Managing Director of ANDRITZ Asselin-Thibeau
27.09.2023

ANDRITZ: Extra-wide carding machine for Italian nonwovens producer

International technology group ANDRITZ has successfully started up the new carding machine and opening/blending line it delivered to Albis in Roasio, Vercelli, Italy.

With its large working width of 5.10 meters, the machine allows for the production of nonwoven fabrics tailored to specific customer requirements while maintaining excellent properties and consistent quality. One example is Albis Curacell ®, a multilayer composite nonwoven fabric in a weight range between 35 and 70 gsm that is produced with a fully water-free patented process and is able to absorb liquid flows of over seven times its own weight. The production line also includes an advanced upstream opening and blending system from ANDRITZ.

Albis, a privately owned group founded in Italy in 1995 by Gianni Boscolo, has been a major player in the nonwoven market for over three decades. Through continuous research and development, the company offers innovative, high-quality nonwoven solutions across various sectors, including hygiene, medical, personal care, textiles, filtration, and agriculture.

International technology group ANDRITZ has successfully started up the new carding machine and opening/blending line it delivered to Albis in Roasio, Vercelli, Italy.

With its large working width of 5.10 meters, the machine allows for the production of nonwoven fabrics tailored to specific customer requirements while maintaining excellent properties and consistent quality. One example is Albis Curacell ®, a multilayer composite nonwoven fabric in a weight range between 35 and 70 gsm that is produced with a fully water-free patented process and is able to absorb liquid flows of over seven times its own weight. The production line also includes an advanced upstream opening and blending system from ANDRITZ.

Albis, a privately owned group founded in Italy in 1995 by Gianni Boscolo, has been a major player in the nonwoven market for over three decades. Through continuous research and development, the company offers innovative, high-quality nonwoven solutions across various sectors, including hygiene, medical, personal care, textiles, filtration, and agriculture.

Source:

ANDRITZ AG

22.09.2023

Lenzing with new outlook for 2023

The continued weak development of the markets relevant to Lenzing, coupled with very cautious market expectations in 2023, requires a reassessment of Lenzing AG’s macroeconomic environment.

Taking into account the current lack of market recovery, the previous earnings forecast is not expected to be achieved. The Lenzing Group is therefore adjusting its forecast for earnings development and is assuming EBITDA in a range of EUR 270 mn to EUR 330 mn for the 2023 financial year.

CEO Stephan Sielaff: “The recovery expected for the second half of the year in the markets relevant to us has not yet occurred. This makes the early measures we took all the more correct. We launched an ambitious cost reduction program back in November 2022, which delivered the expected results ahead of schedule. Building on this, we are implementing a holistic and consistent value creation program with a focus on measures to strengthen profitability and cash flow generation and to exploit the growth potential in the fiber markets through targeted sales activities.”

The continued weak development of the markets relevant to Lenzing, coupled with very cautious market expectations in 2023, requires a reassessment of Lenzing AG’s macroeconomic environment.

Taking into account the current lack of market recovery, the previous earnings forecast is not expected to be achieved. The Lenzing Group is therefore adjusting its forecast for earnings development and is assuming EBITDA in a range of EUR 270 mn to EUR 330 mn for the 2023 financial year.

CEO Stephan Sielaff: “The recovery expected for the second half of the year in the markets relevant to us has not yet occurred. This makes the early measures we took all the more correct. We launched an ambitious cost reduction program back in November 2022, which delivered the expected results ahead of schedule. Building on this, we are implementing a holistic and consistent value creation program with a focus on measures to strengthen profitability and cash flow generation and to exploit the growth potential in the fiber markets through targeted sales activities.”

The Lenzing Group will announce further details about the value creation program when it publishes its quarterly results on November 3, 2023.

Source:

Lenzing Group

22.09.2023

INDA Partners & Waterloo Filtration Institute: Partnering for the FiltXPO™ 2023 Technical Program

INDA, the Association of the Nonwoven Fabrics Industry, is partnering with the Waterloo Filtration Institute to deliver the FiltXPO™ technical program on October 10-11, 2023 in Chicago, Illinois. The Waterloo Filtration Institute was instrumental in recommending program topics and world-class presenters.

Engineers, scientists, and industry professionals will gain the latest insights into the filtration and separation topics affecting the industry today and into the future. The program features presentations include: filter media technologies, advancements and opportunities in filtration machinery and equipment, innovations in clean air for homes and urban areas, standards and testing, industry trends and new developments, and filtration challenges and opportunities.

The keynote for this year’s event is “IAQ Is the New Black” presented by Suzanne Shelton, President & CEO, Shelton Group. Shelton will share the latest data around consumer views on health, safety, people, and the planet. Participants will gain an understanding of the filtration opportunities and the challenges manufacturers face in communicating the value of their products.

INDA, the Association of the Nonwoven Fabrics Industry, is partnering with the Waterloo Filtration Institute to deliver the FiltXPO™ technical program on October 10-11, 2023 in Chicago, Illinois. The Waterloo Filtration Institute was instrumental in recommending program topics and world-class presenters.

Engineers, scientists, and industry professionals will gain the latest insights into the filtration and separation topics affecting the industry today and into the future. The program features presentations include: filter media technologies, advancements and opportunities in filtration machinery and equipment, innovations in clean air for homes and urban areas, standards and testing, industry trends and new developments, and filtration challenges and opportunities.

The keynote for this year’s event is “IAQ Is the New Black” presented by Suzanne Shelton, President & CEO, Shelton Group. Shelton will share the latest data around consumer views on health, safety, people, and the planet. Participants will gain an understanding of the filtration opportunities and the challenges manufacturers face in communicating the value of their products.

A preview of the subject matter experts includes:

  • AAF Flanders – “Air Filter Standards Activity and What It Means for Innovation”
  • Ahlstrom – “Expanding Wetlaid Filtration Media Performance Through Innovation”
  • Air Techniques International – “Application of Automated Filter Tester in Quality Control Testing: Importance of Consistent Aerosol Particle Size Distribution”
  • American Truetzschler, Inc. – “How Really Good Filter Media Is Made”
  • CEREX Advanced Fabrics – “The Antimicrobial Nylon Advantage”
  • Elsner Engineering Works, Inc. – “When Does Automation Make Sense”
  • Hollingsworth & Vose – “Accelerating Membrane Adoption with ROI”
  • INDA – “Beyond Porter’s Five Forces – When Regulation Reshapes Markets”
  • MANN+HUMMEL GmbH – “Filtration for Cleaner Urban Mobility – Introducing Horizon Europe Innovation Action Aersolfd”
  • NatureWorks – “Optimizing Biopolymers to Improve Filter Performance – A Spectrum of Approaches and Opportunities”
  • Palas GmbH – “Influence of Temperature and Humidity to Filter Efficiency and Dust Holding Capacity”
  • Ptak Consulting – “Residential Filtration – Performance Against Infectious Aerosols”
  • The University of Georgia – “Recent Advances in Melt Blown Nonwovens and Filter Media Research”

New this year to FiltXPO are Lightning Talks. Lightning Talks are an opportunity to connect with new trends, products, innovations, and ideas with speakers rotating every eight minutes. Presenting companies include Ahlstrom, Elsner Engineering Works, Inc., Gottlieb Binder GmbH, TSI, and the Waterloo Filtration Institute.

The FiltXPO exhibition takes place October 10-12 and will run concurrently with the technical program.

More information:
INDA Filtxpo Conference
Source:

INDA, the Association of the Nonwoven Fabrics Industry

14.09.2023

Rudolf commissions Baldwin’s TexCoat™ G4 lab-scale precision spray unit

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

The new TexCoat lab-scale unit at Rudolf’s Geretsried, Germany-based Customer Solution Center, tests the sprayability of chemicals on fabrics as an additional tool to help the market transition to precision spray with confidence in the performance and sustainability of the end result.
 
With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates.
 
Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry. On wet-on-dry processes, the finish is applied with 50% of the amount of water required for pad finishing. Dryer fabric entering the stenter means less water to evaporate resulting in less energy and higher production speeds.
 
More specifically, with Baldwin’s TexCoat G4, textile finishers can track and control the finishing process. Changeovers are quickly performed thanks to recipe management, including automated chemistry and coverage selection. Furthermore, the system takes speed information from the drying process to insure exact coverage regardless of any change in speed. TexCoat G4 measures every drop of chemical usage ensuring that the amount of chemical add-on is precise.
 
In addition, the TexCoat G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water-repellants including PFAS-free, softeners, anti-microbials, easy care resins, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, with no special auxiliaries required.

Source:

Baldwin Technology Company Inc.

adidas: Celebrating Women's Tennis with FW23 New York Collection (c) adidas AG
18.08.2023

adidas: Celebrating Women's Tennis with FW23 New York Collection

As part of the 12-piece collection, adidas introduces the SST Jacket – for men and women – as well as the Avacourt in a refreshed look. Both pieces share a bold blue hue – synonymous with the outfit that Billie Jean King wore in the Battle of the Sexes match – which is applied throughout the collection as a consistent design story.

The SST Jacket is inspired by the classic adidas tennis tracksuits from the era when Billie Jean King was at the height of her career, changing tennis on and off the court for years to come.

As part of the 12-piece collection, adidas introduces the SST Jacket – for men and women – as well as the Avacourt in a refreshed look. Both pieces share a bold blue hue – synonymous with the outfit that Billie Jean King wore in the Battle of the Sexes match – which is applied throughout the collection as a consistent design story.

The SST Jacket is inspired by the classic adidas tennis tracksuits from the era when Billie Jean King was at the height of her career, changing tennis on and off the court for years to come.

The Avacourt, having originally launched in 2022, is created and engineered to best support women when playing tennis – featuring a women’s specific last, increased torsion, softer materials and a midfoot support saddle. Updates for the 2023 season bridge today’s silhouette with the one worn by Billie Jean King 50 years ago – which was adidas’ first ever signature tennis shoe for women – via its color story, as well as key material updates. The suede leather tongue has a retro feel and soft premium touch, with the toe guard made from a synthetic suede finishing. Adding to the comfort, the heel collar is lined with terry cloth – a fabric synonymous with the era.

Other key pieces in the collection include the Tennis Modular Leotard AEROREADY Pro with detachable skirt, the Tennis Transformative AEROREADY Dress Pro that evolves into two different styles, and the Tennis Reversible AEROREADY Match Skirt Pro with Tennis HEAT.RDY Short Tight Pro layered underneath. For men, key pieces include the Tennis HEAT.RDY Freelift Polo Shirt Pro, the Tennis Reversible AEROREADY Freelift T-Shirt Pro and the Tennis AEROREADY 2 IN 1 Short Pro.

More information:
adidas Sportswear
Source:

adidas AG