From the Sector

CHOMARAT, the specialist in composite & construction reinforcements and coated fabrics, has demonstrated the Group’s determination to pursue a sustainable process by earning environmental management (ISO 14001) and energy management (ISO 50001) certification for its French sites. “By obtaining both ISO 14001 and ISO 50001 certification, CHOMARAT now has a tested and standardized framework for developing an effective, sustainable environmental and energy management strategy,” says CHOMARAT Environment and Energy Manager Laurent VÉRITÉ.

Minimizing environmental impacts & optimizing energy use
ISO 50001 certification is validation of efficient energy management, with the bonus of lower energy consumption and the tools needed to address a warming climate. ISO 14001 certification is based on standards and requirements, and it constitutes an international benchmark for environmental management systems. “CHOMARAT is committed to a responsible and sustainable process for all of its activities in France. With ISO 14001 certification, the Group is incorporating environmental requirements into its management and production systems,” explains CHOMARAT France CEO Raphaël LAURENT.

Pursuing a long-term strategy
This twofold certification is in keeping with CHOMARAT’s long-term vision. “Our strategy is implemented through new investments and international development. But the Group is also actively involved in sustainable development and a sustainable innovation initiative,” explains Raphaël LAURENT. Measures that have been implemented include reducing the noise level, preventing pollution risks and improving waste management. Fluorescent lighting has been replaced by LEDs; new, more energy-efficient equipment has been installed; and the heating and air-conditioning ductwork has been insulated to reduce fuel-oil consumption.
“It is thanks to the combined efforts of all CHOMARAT’s teams that we were able to obtain these two certifications. For us, this is our first milestone towards a sustainable economy,” concludes Laurent VÉRITÉ.

• The Packnatur® reusable cellulose bag wins State Prize in the B2C category
• Bags are made from wood-based fibers of Lenzing AG, which are biodegradeable
• Bags were developed together with VPZ Verpackungszentrum GmbH and are utilized by Coop and REWE for fruits and vegetables

Lenzing/ Vienna – Lenzing AG was granted the Austrian State Prize 2018 for Smart Packaging this year together with its partners. The Federal Ministry of Digital and Economic Affairs and the Federal Ministry of Sustainability and Tourism bestowed the Austrian State Prize this week in the B2C category on the Packnatur® reusable wood-based bag. This reusable bag is made with fibers produced by Lenzing AG and was developed by Lenzing and its partner VPZ Verpackungszentrum GmbH. The bags are utilized in the supermarkets of the Swiss food retailer Coop and the Austrian firm REWE International AG.

The Packnatur® reusable cellulose bag is particularly suited for the packaging of fruit and vegetables and serves as an ideal replacement for plastic bags. The jury provided the following reasons to justify the selection of the winner: The Packnatur® reusable cellulose bag comprises a long-lasting, reusable packaging solution made of a renewable raw material but not at the expense of food. It has very pleasant haptics and supports longer shelf life of food.

LENZING™ fibers are made from the natural and renewable raw material wood. For this reason, they are biodegradable. Moreover, they pollute neither rivers nor seas with microparticles washed out in the process of washing.

The Austrian State Prize for Smart Packaging was granted on the occasion of the 3rd Austrian Packaging Day. This year for the 58th time, the objective of this award is to highlight modern packaging solutions and excellent projects as best practice examples and thus put the national packaging industry in the international limelight.

As the tradition goes, twice a year the functional fabric fair Performance Days selects the most innovative fabrics, accessories and finishes for their Performance Forum. This year, two functional finishes from textile innovator Devan Chemicals (Moov&Cool® & R-Vital™) were chosen. R-Vital™ was awarded with the ‘100% Jury Like’ stamp, meaning all the members of the Jury selected the sample, a recognition only granted to a handful of the 1400 applications.

R-Vital™ – ‘100% Jury Like’
R-Vital™ is a range of microencapsulated active ingredients that boost textiles with anti-oxidative effects. The microcapsules, attached to the fibre, deliver antioxidants to the body upon friction. The ‘100% Jury Like’ sample is treated with a well-chosen blend of Ubiquinol (Q10), Sea kelp and Thyme oil, which enhances recovery after sports performances. As R-Vital™ is also suitable for other market segments, such as bedding textiles, Devan enables its customers to compose their own blend, allowing them to create truly unique products and hence properties.
Marleen Van der Auwera, BU Manager Health & Wellness is happy to see that R-Vital™ is getting some more attention. “When the technology was first launched about a year ago, we noticed people had some difficulties understanding the concept because it was so revolutionary to them”, she says. “But this recognition really indicates more and more people are seeing its potential.”

Moov&Cool®
Moov&Cool® is a patented polymer technology, providing a cool comfort feel through a combination of durable heat absorption capacity and a unique, balanced moisture transfer system. By lowering the body core temperature, the finishing treatment helps professional athletes to take their performance to the next level. Furthermore, the technology is also designed to enhance comfort during physical activities of recreational athletes.
Moov&Cool® was first launched at Performance Days in April and will be presented in full detail at the upcoming edition, which will take place on November 28^th & 29^th in Munich, Germany.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.

• HUB 1922, the fashion division of the RUDOLF GROUP, takes the stage at the Kingpins Show in Amsterdam and presents new technologies that make it possible to move away from environmentally questionable industrial practices.
• HUB 1922 also announces the opening of the new company building in an ancient textile factory near Milan.

Amsterdam/Geretsried/Milan. It was only six months ago that the RUDOLF GROUP, with its fashion Division named HUB 1922, began its journey through the fascinating world of garment finishing. Since then, the team has made significant progress and has moved from being a newcomer to the business to a solid and reliable reality. “HUB 1922 introduces the Rudolf Group to design thinking,” says Alberto De Conti, Head of Fashion Division at Rudolf Group. “And when you break perceived restrictions and paradigms within a strongly science-driven organization, only sky is the limit.”

For an entire semester, the organisation remained focused on one, single goal without getting distracted from it: to become the partner of choice for environmentally conscious advancements in garment processing that are rooted in real experience and science.

Emphasis was put on listening attentively to the market and on engineering solutions proactively, without being prompted.
When it comes to Denim, two separate yet correlated calls for action were heard:
1. the need for a serious departure from established industrial practices that are environmentally questionable
2. the opportunity to change the current rules and stir toward enhanced product quality.

Departure from the environmentally questionable

• HypNO: The next generation of bleach

Many attempts to technical alternatives to local and total denim bleaching have been launched in the market, over the past five years, by a number of competing players. Originality and innovation are at the base of HypNO technical uniqueness that can be injected into traditional denim processing, but that can also be used to create whole new processes and aesthetics.
Birth child of relentless dedication to science, HypNO is the latest alternative to the traditional denim bleaching agents currently under the spotlight because of their alleged safety issues. HypNO is the next generation of bleach.

- HypNO is based on the application of a whole new family of RUCORIT compounds, which are halogene-free and heavy metal-free
- HypNO can replace both potassium permanganate and sodium hypochlorite with one more eco-friendly solution
- HypNO is free from unpleasant smells; it is production friendly and suitable for both spray and bath applications
- HypNO does not require neutralisation with agents such as sodium metabisulphite or peroxides, hence reducing the need for chemicals significantly
- HypNO is GOTS approved. Bluesign and ZDHC Chemical Gateway certifications are intended
- HypNO further helps in the elimination of pumice stones
- HypNO is highly efficient and has been engineered to be cost competitive compared to other existing bleaching solutions

Toward enhanced product quality

• SoSoft, RawLong, DuraBlue

Durability over time still builds a brands’ reputation for quality. The notion of “durability” has changed over the years and has moved from sturdy workwear to the product's ability to retain its characteristics and structural properties.

“It goes against the whole denim philosophy, but, jeans are increasingly bought for what they look like at the time of purchase and are expected to evolve as little as possible. It is what it is; you can’t argue with consumers” says De Conti.

SoSoft, RawLong, DuraBlue, the three new technical concepts launched at Kingpins Amsterdam by the RUDOLF GROUP all sit under the umbrella wings of enhanced quality and specifically address long-lasting softness, preservation of original look and depth of blue.

• SoSoft

All appreciate the softness and suppleness of used/worn denim and the comfort benefit it delivers. It is a generic denim truth, and it is even stronger when it can extend over time. SoSsoft is about softeners carefully engineered for an enduring emotion, one that lives along favourite clothes.

Tried and tested to over 15 home washes, these marvels of chemical engineering allow consumers to toss domestic fabric softeners to the benefit of environmental sustainability.

• RawLong

Denim lovers want raw jeans to fade with time, soften and transform into what feels like an extension of their body. More often, people just want to prolong the look they chose. In both cases, home washing is a headache.

Years of testing have identified RawLong innovative, highly durable and natural solution that keep wearers fresh and at ease in their jeans allowing for long-wearing without washing. Moreover, less home washing means much less impact on the environment.

• DuraBlue

The role of designers is to come up with the bluest of blue jeans in a spectrum of fantastic new blue finishes and supporting textures. The role of DuraBlue is to ensure a continuously updated collection of technical solutions that keep that rich, deep, dark blueness of jeans for much longer while limiting the quality issues that come with denim rubbing. In other words, light underwear, snowy shoes, and white sofas no longer live in fear.

The launch of HUB 1922

• Busto Arsizio, Italy.

On a discreet street of Busto Arsizio, a village at the North of Milan is a red-brick building which in the 1800’s was the house of a textile mill. This 150-year-old structure is where the RUDOLF GROUP, the 100-year-old leader of textile, functional, responsible chemistry, is about to open its Fashion Division. Or, better, it’s HUB 1922.

HUB 1922 is committed to research and develop innovation within garment processing for the privately held mother company. HUB 1922, whose doors are expected to open during fourth quarter of 2018, will foster collaborative efforts with international fashion brands and retailers, will provide product innovation ideas at the crossroad of fashion and utilitarian functionality and will introduce elements of unorthodox diversity rooted in deep scientific knowledge, true environmental responsibility, technical innovation and creativity. “At a time when science plays such a powerful role in the life of society, it is incumbent on fashion to be dealing with scientific research. HUB 1922 facilitates that reunion” concludes De Conti.

Twelve companies from eight different countries will receive a JEC Innovation Award at JEC Asia 2018. Asia-Pacific is an innovative region that sets the tone for all other regions of the globe. Once again, the JEC Innovation Awards highlight how composites bring solutions considering the new challenges in terms of efficiency, sustainability and life-cycle analysis.

This year, JEC Group awards innovations in the following categories: aerospace (structural and tooling), automotive, commercial vehicles, e-mobility, marine, railway, sports & leisure, infrastructure & civil engineering, industrial equipment, sustainability and additive manufacturing.

The ceremony will take place on Thursday November 15, 2018 at the COEX Center of Seoul (South Korea). Ida DAUSSY (Seo Hye-na), will host the ceremony in front of officials, manufacturers, scientists and composites professionals.

Category: AEROSPACE – STRUCTURAL
Winner: CSIR National Aerospace Laboratories (India)

Most of the composite structures for aircraft are made of carbon-epoxy composites, which can withstand a maximum service temperature of 130°C. As a consequence, carbon-epoxy materials cannot be used in hot zones like engine vicinity areas. The Aeronautical Development Agency (ADA) and CSIR-NAL took up the challenge of developing high temperature resistant composites for use in hot zones of light combat aircraft, which would result in significant weight and cost savings, as well as a considerable reduction in the meantime between failures (MTBF) due to thermal ageing.

The first task was to choose a material system with a service temperature of about ~ 200°C. During the material selection process, it was found that BMI resins are a relatively young class of thermosetting polymers. Hence, a carbon-BMI prepreg was selected due to a number of unique features including excellent physical property retention at elevated temperatures and in wet environments.

It was realized that weight savings and performance can be maximized using co-curing technology. This results in a large reduction of fabrication cycle times, costs and weight. Co-cured structures have fewer fasteners, which results in shorter assembly cycle times and also reduces sealing issues.

A prototype engine bay door assembly was built and tested at 180°C for flight certification. The engine bay door consists of an inner skin and co-cured outer skin assembly with eight transverse stiffeners. The stiffeners were designed with ‘J’ sections. The door size was 1.5 m length, 1 m width and 0.4 m overall depth. The co-cured door was developed using autoclave moulding. Two doors were installed in prototype aircraft and successfully flown.

The Mechanical Engineering Industry Association (VDMA) has awarded two prizes to graduates of the Institut für Textiltechnik (ITA) of RWTH Aachen University - the dissertation prize and the creativity prize of the Walter Reiners Foundation of German Textile Machinery 2018. ITA alumnus Dr Benjamin Weise was awarded the dissertation prize for the development of novel fibres for textile charge storage devices. For their work on a guide to 4D product design, Jan Merlin Abram and Aalon Tal (both ITA students) were honoured with the creativity prize. The dissertation prize is endowed with €5,000 whilst the creativity prize contains a one-year scholarship of €250 per month. Peter D. Dornier, President of the Walter Reiners Foundation and Chairman of the Management Board of Lindauer DORNIER, presented the awards on the 18 September 2018 at the 18th Textile Machinery Forum in the Digital Capability Center in Aachen, Germany.

Graphene revolutionizes all-in-one - supercaps, reduction of terahertz radiation and antistatics

In his dissertation "Development of graphene-modified multifilament yarns for the production of textile charge storage devices", laureate Dr Benjamin Weise developed novel fibres made of polyamide and graphene and further processed them into textile surfaces. The newly developed polyamide graphene fibres are featuring a multitude of advantages:

• Due to their high performance in the charge storage area, they are predestined for use in double-layer capacitors, so-called super capacitors, or supercaps in short. Compared to lithium-ion batteries, supercaps offer significantly higher power density and a longer lifetime as no chemical reactions are taking place. towing to the graphene platelets in the filaments, it is now possible for the first time to integrate a charge storage device directly into a textile without having to sew in a rechargeable battery. This new fibre is therefore suitable for prospective use in smart textiles, for instance in a textile defibrillator.
• The new graphene-modified polyamide fibres can attenuate inident terahertz radiation up to 25 % of their original intensity. Terahertz radiation, for example, offers transmission rates of 100 Mbit/sec and is therefore of high interest for high-performance wireless communication. However, the radiation could damage sensible electronics as in aircrafts if this technology will be used widespread. Consequently, the shielding of the radiation is of high importance, e.g. in the form of fibre composite components in the aircraft, which protect the on-board electronics.
• As the fibres are showcasing a dissipative electrical conductivity, personal protective equipment is another prospective field of application.  

The development of a pilot process for graphene-modified fibres and the production of textile demonstrators are novel and disruptive attainments of Dr Weise’s PhD thesis and the reason for the award ceremony to him. Due to its outstanding properties, the European Union is funding research on graphene within the frame of the "Graphene Flagship" with an overall budget of one billion Euro (source: http://graphene-flagship.eu/project/Pages/About-Graphene-Flagship.aspx).

Modular product design of 4D products is now possible in simplified form

How can three-dimensional products change their shape over time and thus become "four-dimensional"? The students Jan Merlin Abram and Aalon Tal provide answers to this question in their project work "Leitfaden zur Auslegung hybrider morphender Textilien am Beispiel eines Scharniers" (Guidelines for the Design of Hybrid Morphing Textiles Using the Example of a Hinge), for which they were awarded the creativity prize. In their work, the students offer a guideline for the development of a four-dimensional textile from the idea to the demonstrator. Four-dimensional textiles, for example, consist of a hybrid material of elastic textile on which three-dimensional structures are printed. The fourth dimension describes the change in shape and/or a property over a defined period of time (= morphing).  This change is caused by external influences such as light and heat.

Every year, the Foundation of the German Textile Machinery awards prizes for the best dissertation, diploma or master's thesis and the creativity prize for the smartest student research project. Further prizes were awarded to Eric Otto, ITM Dresden, and Susanne Fischer, Reutlingen University.

• September 19, 20, and 21, 2018
• This September visit Première Vision’s Smart Square for a great opportunity to meet and greet ROICA™ experts to discuss responsible innovation and well-being.

ROICA™ experts showcase the world-first ROICA™ Eco Smart family that offers 2 responsible made yarns: a GRS (Global Recycled Standard) version 3 certified yarn and the world’s first yarn awarded Cradle2Cradle Material Health Gold Level Certificate and Hohenstein Environment compatibility certification.

On display in the Smart Square, a 800-sq. m. area dedicated to shed light on a new generation of values combining creativity, innovation and sustainability, is a  unique  range of ROICA™ Eco-Smart family based fabrics, the world's first responsibly made premium stretch fibers creating ROICA™ smart yarns that offer sustainable solutions with impressive certifications:

• Global Recycled Standard (GRS) certified by Textile Exchange - ROICA™ constructed with more than 50% pre-consumer recycled content.
• Cradle to Cradle Certified™ Gold Level for Material Health product and ingredients - ROICA™ yarn evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

ROICA™ experts empower attendees with knowledge, and inspire creativity as they demonstrate ROICA™ Eco-Smart family functionality. Engage the experts in the Smart Square, ask questions and learn about the company’s ongoing commitment to responsible innovation. At the corporate level, ROICA™ has achieved the following certifications: Oeko Tex 100, ISO 14001:2004, ISO 9001:2008. Moreover, ROICA™ mills in Germay achieved the certification of ISO 50001:2001.

ROICA™ partners exhibiting at Première Vision Paris presenting ROICA™ Eco-Smart family:

• Fukui Warp Knitting CO.,LTD  (JP) Hall 6 booth H15
• Iluna Group S.p.A (IT) Hall 5 booth N14 P13
• Jackytex (IT) Hall 5 booth M24 N23
• Lanificio Europa (IT) Hall 6 stand D12, F49
• Maglificio Ripa S.p.A. (IT) Hall 5 booth 5P29
• M.I.T.I. Spa (IT) Hall 6 booth G19
• Penn Textile Solutions GmbH / Penn Italia (DE/IT) booth 6G17
• Sofileta (FR) Hall 6 booth H18 6J13
• TINTEX Textiles (PT) Hall 5 booth N56

Additional ROICA™ partners at Première Vision also exhibiting a wide-range of other ROICA™ specialties:

• Eusebio (IT) Hall 5 booth 5P34 5R15
• Kurabo Industries LTD (JP) Hall 6 booth C20 D21

Lastly, on Friday 21st September 2018, at 1.30 pm, you are invited to join Dr. Stephan Hütte at Première Vision Smart Square as he facilitates an open discussion with exhibitors and introduces the audience to ROICA™ Eco-Smart family. Dr. Hütte will discuss ROICA™ textile innovations for contemporary consumer within the fashion, lingerie and activewear markets.

Recognizing Asahi Kasei for spearheading the premium stretch market, the Dorbinbirn-GFC Global Fiber Congress has invited Dr. Stephan Hütte, Development Manager ROICA™ Fibers at Asahi Kasei to present ROICA™ Eco-Smart family at this year’s congress. The Europe-centered innovation platform for the fiber industry is a distinguished idea and network generator hosting top-ranking international experts in fiber innovations. The event includes 700 participants from 30 nations and will take place September 12th through the 14th in Austria.

Last but not least, at Première Vision ROICA™ is proud to welcome Shinichiro Haga, Senior Executive Manager - ROICA™ Division. The company also announces an internal appointment: Mr. Hiroaki Shinohe elected as Chief Marketing Officer for European market.

The Autumn Edition of Intertextile Shanghai Home Textiles will open today, returning as a major event for big-name players in the domestic and international home textile industry. Covering six halls, it will accommodate around 1,040 suppliers from around 30 countries & regions. With 40,000 visitors expected to attend, including import & export corporations, wholesalers, distributors, chain stores and home product manufacturers, the fair is anticipated to be an ideal platform for suppliers to introduce new products to the market.

Suppliers set to seize market shares in China’s revitalised home textile market
China’s home textile market has been growing steadily, with both domestic and overseas suppliers determined to take advantage of Intertextile Shanghai as a platform to gain market share. This year, premium editors from China, including Beijing Xinyada, Beijing Euroart, Jasonite, SATI and Hangzhou Antex, will be showcasing their high-end collections while international contract business suppliers, such as JAB Anstoetz and Morphrow, are also present to cater to the growing demand for their quality products.
In addition to a majority of local brands and four domestic pavilions from Shaoxing, Tongxiang, Haining and Yuhang regions, there will also be international country & region pavilions from Belgium, India, Pakistan, Taiwan and Turkey, showcasing their specialised products.

Around 1,040 exhibitors covering every home textile sourcing need
Growing middle and upper classes in China have seen consumers’ buying trends expand to buying combinations of items with particular design trends. Matching this trend, a number of whole home exhibitors that provide one-stop services, from selecting home textile products to giving home decoration ideas, have been reaping the benefits in recent editions of Intertextile Shanghai Home Textiles – and 2018 is set to continue reflecting this trend.

Around 1,040 exhibitors at Intertextile Shanghai Home Textiles will showcase a wide variety of home textile products, including bedding, bath, table & kitchen, curtains & upholstery, textile designs & technology, whole home, sun protection, wall coverings and carpets & rugs. This diverse range of offerings establishes the reason why Intertextile Shanghai attracts genuine, high-quality buyers – across the spectrum, there’s something for every buyer at this fair.  

Fringe programme events to provide insight and inspiration
Intertextile Shanghai Home Textiles aims to provide inspiration for the next season at the same time as providing a platform for business interactions. At this edition’s fringe programme, key events include the InterDesign – Trend Area, displaying three key trend themes for A/W19 in collaboration with the international trendsetter NellyRodiTM Agency. Trend tours and forums will also take place, giving visitors the opportunity to learn and discuss lifestyle trends with designers and trend experts.

At Contract Business 360o, the fair will feature a showcase area at hall 5.1 displaying quality contract upholstery from leading exhibitors, and seminars on current design and market insights of the contract business sector. Catering to popular demand is the return of the Digital Printing Micro Factory, demonstrating a complete production process onsite, alongside forums on the benefits of digital printing & latest production technics. The Andrew Martin International Interior Design Summit will see a forum of experts share their design insights in the new information era, whilst the 2018 Home Furnishing Crossover Exhibition will demonstrate design talent and creativity of interior designers, and present new home living styles.

The show will be held from 27 – 30 August in the National Exhibition and Convention Center in Shanghai. Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

• FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
• Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
• Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
• Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

• Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
• SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
• Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
• Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
• Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
• Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
• Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.