From the Sector

Reinach, Switzerland  - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, recently launched at the ITMA exhibition its new Foron® SP-WF, a range of high wet-fast disperse dyes for sportswear and active wear applications.

The Foron® SP-WF dyes are especially suited for the coloration of polyester fibers and microfibers, and polyester/elastane blends, in exhaustion application.
The Foron® SP-WF dyes were developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

The new product is at the core of Archroma's Fast Sport, a coloration system for polyester knitted sportswear, providing the best fastness in the shortest possible time with a reduced environmental footprint.
The Foron® SP-WF range which includes primary and ternary color grades has been developed to fulfil the high color wet fastness and performance requirements of sportswear manufacturers and brands.
Moreover, the core ternary color grades enable deep shades at lower dyeing temperatures on sensitive polyester/elastane fabrics without causing excessive fiber damage, saving energy resources and meeting the high fastness demand of leading brand companies.

When using Foron® SP-WF dyes as part of the Fast Sport system, manufacturers can in many cases have the potential to significantly reduce their consumption of time, energy, chemical, and water, as well as their CO2 emissions.

“We see a growing demand for apparel in the sportswear and active wear segment, reinforced with the now installed athleisure trend,” says Mark Dohmen, Head of Archroma’s Competence Center Automotive and Synthetic Dyes. “Consumers want deep color that stays put on the fiber and brands are defining their requirements accordingly. With our Foron® SP-WF, we can offer to manufacturers of sportswear textiles a solution that combines high levels of wet fastness with high productivity and low resource consumption. Because it’s our nature!”

• Borealis’ EverMinds™ ambition moves industry one step closer to plastics circularity thanks to new recycling technology and improved recyclate
• Borealis also announces significant material improvements to existing Purpolen® recyclate materials

Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the introduction of a new plastics recycling technology, Borcycle™. This evolving technology will be used to produce high-quality compounds made of recycled polyolefins (rPO) such as the newly-launched Borcycle™ MF1981SY, an rPO with over 80% recycled content intended for use in visible appliance parts. Borealis also announces a series of significant material improvements to existing recyclates in the established Purpolen™ brand portfolio. These market launches and product improvements are important technology advancements and thus accelerate the transformation to a circular economy of plastics. Borealis and its wholly-owned subsidiary, mtm plastics, will showcase the new Borcycle technology and recyclate innovations at the K 2019 in October.

Borealis is leading the industry by applying its Visioneering Philosophy™ to the development and implementation of novel polyolefins-based solutions that enable plastics reuse, recycling, and recovery, and by designing for circularity. These wide-ranging activities are gathered under the symbolic roof of EverMinds™, the Borealis platform dedicated to promoting a more circular mind-set in the industry. By capitalising on its profound expertise in virgin polyolefins and collaborating with value chain partners, Borealis keeps discovering new opportunities for business growth within the circular economy.

Advancing technology to bring about polyolefin circularity

The new technology, Borcycle, transforms polyolefin-based waste streams into recyclate material such as pellets. As a transformative technology, it complements the existing Borealis virgin polyolefins portfolio with a range of pioneering, circular solutions. It unites state-of-the-art technology with the profound Borealis polymer expertise gained over decades.

As a scalable and modular technology, Borcycle has been developed to meet growing market demand for high-quality recyclate. Leading appliance brand owners, for one, have pledged to increase the amount of recycled plastics in their goods. Yet until recently, producers have not been able to rely on a consistent supply of high-quality recyclate. The Borcycle technology will help address this challenge. Compounds made using the Borcycle technology deliver high performance, add value and offer versatility. Producers and brand owners in a range of industries will profit from the availability of high-quality recyclate that helps them meet environmental and regulatory challenges.

“Advancing technology is crucial if our aim is to implement value-creating solutions in the circular sphere,” claims Maurits van Tol, Borealis Senior Vice President, Innovation, Technology & Circular Economy Solutions. “‘Building tomorrow together’ means innovating, collaborating, focussing on the customer, and above all – taking action. The launch of our new recycling technology Borcycle is tangible proof of our commitment to achieving plastics circularity.”

New and improved recyclate for high-end applications

Borcycle™ MF1981SY is the first of several upcoming launches of rPO solutions made under the umbrella of the Borcycle technology. Borcycle™ MF1981SY will be available to Borealis customers in Europe. The compound is an exciting addition to the rPO portfolio because it is a 10% talc-filled compound that contains over 80% recycled material. It offers an ideal balance between stiffness and impact. The compound is especially suited for use in visible black parts, for example in small appliances.

Like its relatives in the mtm plastics family of recyclate materials, Borcycle™ MF1981SY is a truly sustainable offering. Recyclates from mtm save approximately 30% of CO2 emissions compared to virgin materials.

A number of significant improvements have been made to existing recyclate grades in the Purpolen portfolio.

“Mechanical recycling is presently a most eco-efficient method to implement the principles of the circular economy,” explains Guenter Stephan, Head of Mechanical Recycling, Borealis Circular Economy Solutions. “Borealis and mtm plastics are leveraging their respective areas of expertise to make significant progress in achieving polyolefin circularity by upscaling recycling output and ensuring the reliable supply of high-quality plastics recyclate for European producers, in particular.”

Mayer & Cie. (MCT) is premiering the OVJA 1.1 EETT at the industry’s leading trade fair, ITMA. A premium jacquard machine, it is part of the focus on sports of the company’s “Stay a winner: With Mayer & Cie.” presentation in Barcelona. The industry leader developed the OVJA 1.1 EETT especially for the manufacture of shoe uppers now that “fabrics” are in demand for sports and leisure footwear. The OVJA 1.1 EETT comes with double electronics and double transfer technology, which is reflected in an extra variety of patterns and, in particular, in innovative hole structures.

“The OVJA 1.1 EETT is yet another machine in our portfolio with which customers can claim to be on the winning side in keeping with our ITMA slogan ‘Stay a winner: With Mayer & Cie.’,” says Marcus Mayer, Managing Director of Mayer & Cie. in charge of technical development. “The OVJA 1.1 EETT is most definitely a premium machine and the right choice for especially exacting requirements such as multi-coloured spacer fabrics with a 3D effect or a wide range of hole structures.”

• Inspired by the health megatrend, the keynote theme for DOMOTEX puts wellbeing, naturalness and sustainability at the top of the agenda  
• Stronger focus on contract business
• Manufacturers invited to creatively frame their products as expressions of the keynote theme

Preparations are already ramping up for the 2020 edition of the world’s leading trade show for carpets and floor coverings DOMOTEX. The upcoming show, to be held from 10 to 13 January 2020, has ATMYSPHERE as its keynote theme, symbolizing its central focus on all those qualities of floors and floor coverings that contribute to wellbeing, naturalness and sustainability.
 
Examples of products from the floor coverings industry that possess these qualities include floors with acoustic properties or sound-insulation components; carpets that bind fine dust particles or have thermal insulation properties; resilient floor coverings that are hypo-allergenic; and natural-wood floorboards that improve the interior climate by capturing excess humidity and releasing it again when the air in the room is dry. Other qualities that enhance positive indoor atmospherics include softness and pleasantness to the touch, sustainability, and aesthetic details that help transform rooms into oases of personal wellbeing.
 
“This year, as indeed in previous years, the lead theme is inspired by a current megatrend,” explains Sonia Wedell-Castellano, Deutsche Messe’s Global Director DOMOTEX. “And that trend is society’s heightened focus on health. Health is synonymous with quality of life and living well – and therefore translates into high expectations of the spaces around us. Alongside this, considerations of sustainability and recycling – and hence natural materials – continue to play a major role in our society. In terms of floor coverings, these are considerations and themes that are currently very much to the fore with our exhibitors and their work, especially given the great importance of floors as elements of creative interior design. With the right materials and design, carpets and floor coverings can be important factors in personal wellbeing and in the design of homes and workplaces that promote it. That is why ATMYSPHERE is of such definitive importance for all our exhibitors and visitor target groups.”

The “Framing Trends” showcase at DOMOTEX 2020 is a unique opportunity for manufacturers, artists and students to stage interior designs inspired by the ATMYSPHERE keynote theme and hence position themselves as trend leaders in innovative products and solutions for today’s modern floors and their positive, lifeaffirming qualities. Applications for participation at the “Framing Trends” showcase  are now open. Interested exhibitors and flooring-industry companies are invited to submit their ideas for displays of indoor oases of wellbeing that are built from the floor up.

At ITMA 2019 in Barcelona from June 20-26th, Goller will introduce the new Knit Merc for achieving the highest quality mercerization of knitted fabrics at the lowest tension and with under 3% variation in dimensional stability with high grade fabrics, for perfect dyeing results every time.

Mercerization is an essential textile finishing step for all cotton and cellulosic fibre-based fabrics in order to improve dye uptake and tear strength while reducing fabric shrinkage and imparting a silk-like lustre to the materials.

The Knit Merc is the result of intensive R&D developments at Goller and follows the successful introduction to the market of the company’s Sintensa Cyclone drum washing compartments for achieving the highest washing efficiency at the lowest tension.

The Knit Merc being exhibited at ITMA 2019 can accommodate 8.4 metres of fabric in its impregnation compartment and a further four metres in its first chain section to achieve a production speed of 25m/min at 30 seconds dipping time.

It is designed for dry-on-wet mercerizing, either cold or hot, and is equipped with an inlet combination of scroll and slat rollers for fabric guidance, a Tandematic uncurler in front of a rubberized de-airing roller and a grooved 320mm bottom roller with 320mm and 600mm perforated upper drums.

It benefits from automatic tension regulation and the low liquor content is ensured by the integrated lye tank and automatic circulation and filtration units.

An 8-ton high efficiency squeezer is stationed at the exit before the chain section and a 5-ton squeezer at the exit of the chain field.

Further fabric control and stability is provided by a cast iron pin chain with automatic optical and mechanical sensors, the Tandematic uncurler, an overfeed device and a driven belt arrangement for fabric support.

The last frontier of innovation in racing suits made with yarns in Metamicro is the model Prime SP-16+, designed in collaboration with the Team McLaren Honda F.1

The spinning mill Filidea, joint venture between Marchi & Fildi spa and Abalıoğlu Holding A.Ş specialized in technical and high performance yarns with natural and synthtic fibers, is parter of Sparco, italian Company leader for the production of automotive components and technical apparels for the most important world Championships. The cooperation between the two Companies located in Piedmont, northern Italy, is focused on the supply of yarns with Metamicro in an exclusive composition, that are used for the production of the racing suits Sparco of the Premium range for Formula 1 and the World Rally Championship. The fire resistant yarn Metamicro based on aramidic fibers are a product of the latest generation, for their production it is necessary a special spinning line. The production is following the strict Sparco standards. Sparco controls all the production chain of racing suits, from Filidea, who has the competence to dye all the yarns with aramidic fibers in its own dyeing plant, to the woven fabric, produced and dyed in its own plant, to the woven fabric made by the italian Company TAT, till the production of garments. The process is always improved and tested.

Metamicro yarns are made by an high peformance spinning process. They are used for the production of fire resistant fabrics, that make a protection barrier for the body against flames and high temperature. The very fine micronage allows the production of very light fabrics with thick texture, the perfect base for light and comfortable suits. These features assure easier movements to the driver and the maximum protection from fire, keeping high breathability.

Filidea has invested on its production capacity of corespun yarns with XLANCE® technology, fiber used for the production of longlasting workwear apparel with an excellent fitting.

The spinning mill Filidea, joint venture between Marchi & Fildi spa and Abalıoğlu Holding A.Ş specialize in technical and high performance yarns with natural and synthtic fibers, is increasing its production of blends with XLANCE®.

XLANCE® is the innovative elastolefin fibe, elastic, chlorine and UV resistant. It finds application on workwear and outdoor clothing, with natural and comfort fitting. The comfort stretch feature follows the the body’s natural movement during the day-to-day work. Workwear clothing are so light, resistant and with a contemporary look. Resistance to abrasion and to frequent industrial laundry cycles with chemical products meet the needs of several professional sectors. XLANCE® is produced by ©Xlance srl, Company located in Varallo Pombia (province of Novara – Piedmont – Italy) that found in Filidea the perfect partner for the development of specific yarns, that are getting more and more requested. An innovation that is getting more important thanks to the cooperation of the two textile Companies located in Piedmont. Filidea has been producing XLANCE® yarns since 2009 and has now a great know-how. The Company to strengthens its leadership in technical yarns, for the main applications on protetictive garments, workwear, sportswear, racing and automotive. Filidea has developed and consolidated several partnerships for the creation of complete supply chains and the collaboration with ©Xlance is a perfect example.

Lectra has been awarded by a jury of experts the Texprocess Innovation Award 2019 in the New Process category for its latest ground-breaking offer, Fashion On Demand by Lectra.

Fashion On Demand by Lectra automates the entire personalization process, from order reception and product development to the final cutting stages. Resulting from a four-year research-and-development process, the digital solution for on-demand production was developed based on Industry 4.0 principles.

"We are very proud to receive this prestigious award at Texprocess, the biggest international event for all fashion players. Fashion On Demand by Lectra allows companies to produce personalized clothing at the same speed as ready-to-wear and avoid overstocking by producing in precise quantities,” states Holger Max-Lang, President, Northern & Eastern Europe, Middle East, Lectra.

Fashion On Demand by Lectra is available in the form of two packages, one dedicated to made to measure, with pattern adjustments, and the other to customization, with product characteristic alterations. This turnkey solution automates on-demand production right from order reception to production development stages and the cutting room. Companies can define their desired product personalization criteria for each item depending on the package, and launch production processes right from the get-go, without interfering with their standard workflows.

"This innovative cloud-based platform solution ensures efficient made-to-measure and customization production processes and facilitates nearshoring for companies that offer individualized products. This technology is up and running and can be used by the fashion industry on a plug-and-play basis," say the jury experts. “Since 2011, the Texprocess Innovation Award has been honoring remarkable achievements and new developments in the Texprocess product range under two categories: new technology and new process. The winners are selected based on criteria such as degree of innovation, choice of materials and environmental sustainability."

"Beyond Conventional Function" is the exciting special topic at the PERFORMANCE FORUM of the next PERFORMANCE DAYS. Besides the obvious beauty, which is the main topic at the upcoming trade fair, often it is the fabrics that also hide some special added benefit that are of particular interest.

THE BEAUTY OF FUNCTION is the main theme at the next PERFORMANCE DAYS trade fair for functional fabrics and accessories on May 8-9th, 2019 in Munich. Around 300 exhibitors present various interpretations of beauty across all categories in their functional fabrics. Although obviously designed for beauty, these innovative fabrics also promise many hidden benefits at the same time. At the PERFORMANCE FORUM, a special area on the PERFORMANCE WALL is devoted to the most important of these special fabrics, rather than highlighting just one of the fabrics in the context of an award.

The PERFORMANCE JURY selected fabrics from well over 1.100 manufacturer submissions; not only fabrics with an interesting look and feel with essential functions like climate regulation and weather protection for sports, but also fabrics that provide the wearer of the garment with additional benefits and special comfort. These special fabrics represent the motto: "Beyond Conventional Function."

At home, at work, on the street, in the sky, on the water, even in space, technical textiles and nonwovens are swinging towards ever higher performances in amazing applications. Versatile and light, but sometimes stronger than metal, these materials of the future gain their superpowers from the interaction of precisely coordinated textile systems. At Techtextil in Frankfurt am Main from May 14 to 17, 2019 in Hall 3, B06, Oerlikon will be showing chemical fiber applications made of polyester, polypropylene and Co. and what they can do in these fields. However, these exhibits are only a communicative means to an end, as Oerlikon is primarily interested in placing the associated machinery and plant solutions at the centre of discussions with trade fair visitors.

More than two thirds of all technical innovations are directly or indirectly based on new materials, says the German Research Ministry. One could add: The key to a more advanced world, for technological products with amazing functions, breathtaking performance and greater environmental benefits, is also to improve the properties and processing of materials. This applies first and foremost to textiles. Probably no other fabric is so strong as a "team player" who draws its strength from its cohesion. A single polyester thread, for example, looks inconspicuous. Processed into a thigh-thick special weave, however, high-strength High Modulus/High Tenacity fibers anchor floating oil platforms in the deepest waters. These kilometer-long "Mooring Ropes" withstand a breaking load of well over 1,000 tons and perform their task better than steel. For decades, Oerlikon Barmag has been offering special solutions for the production of so-called industrial yarns (IDY) that are tailored to customers worldwide. "We will once again be presenting numerous innovations at this trade fair to inspire our customers," explains Dr.-Ing. Dipl.-Chem. Roy Dolmans, Technology Manager IDY and R&D Filament Processing.

Techtextil 2019: Schoeller launches its new finishing technology called NanoSphere® Plus. The special effect of this new development is its protection against fingerprints and greasy stains. Furthermore, even after being absorbed by the fabric stains are quickly and easily wiped away without washing.

Every human being leaves its marks. In particular, on daily-use items that are picked up or touched often. Especially on textile surfaces, hand and fingerprints in combination with dirt and dust particles leave an unpleasant, greasy dirt film, which is very difficult to clean.

NanoSphere® Plus, developed by Schoeller Technologies AG, the business unit for technologies at Schoeller Textil AG, works on the basis of a functional chain. Textiles are equipped with a matrix finish to reduce the capillary effect in the textile’s fibers. Especially unpleasant sebum residues and dirt that are often released by finger and handprints are less absorbed by the fabric and can be easily wiped away.

Beside the excellent protection against finger and handprints, textiles with NanoSphere® Plus are additionally water and oil repellent, abrasion resistant and extremely durable. The finishing technology rarely affects the look or feel of the fabric.

Non-washable textiles that are often touched by hands or fingers, or fabrics that are in direct contact with the skin benefit most from this new technology. Therefore, NanoSphere® Plus is ideal for woven fabrics and synthetic leather or synthetic suede for bags, covers of electronical devices, head phones, loud speakers or other items in the field of interior equipment.