From the Sector

As reported on August 17, 2020, the Supervisory Board of SGL Carbon SE had appointed Thomas Dippold to CFO and member of the Board of Management of SGL Carbon SE effective December 1, 2020. Fortunately, Mr. Dippold is able to assume office of his mandate as member of the Board of Management of SGL Carbon SE earlier, so that the Supervisory Board of the company has brought forward the appointment to October 15, 2020, also to prepare for the planned assumption of the CFO position.

As previously reported, and effective December 1, 2020, Mr. Dippold is succeeding the long-standing CFO Dr. Michael Majerus, who is resigning from his office effective November 30, 2020 by mutual amicable consent.

As planned, Dr. Stephan Bühler resigned from his office as member of the Board of Management effective October 15, 2020.

Carbon dioxide-based fibre for climate protection and interdisciplinary training with novel Smart Textiles test rig

The Wilhelm-Lorch-Stiftung, based in Frankfurt am Main, Germany, honours a project of the Institut für Textiltechnik of RWTH Aachen University, short ITA, and awards a sponsorship prize to the ITA graduate Ricarda Wissel on 25 June 2020. She is awarded for her outstanding bachelor thesis " Implementation of elastic yarns made from carbon dioxide based thermoplastic polyurethane in socks " with funding for a subject-specific continuation of her education. The ITA receives the project sponsorship prize for the project "Smart Textiles - an interdisciplinary training course to promote young scientists in future technologies", which was submitted to the Wilhelm-Lorch-Stiftung by ITA´s PhD candidate Simon Kammler.

Carbon dioxide-based fibre from industrial waste contributes to climate protection

ITA scientist Dr.-Ing. Pavan Manvi has developed a melt spinning process at ITA for the production of elastic yarn from thermoplastic polyurethane, in which carbon dioxide is used as one of the raw materials. In her bachelor thesis, Ricarda Wissel successfully developed a process chain for the CO2-based yarn in a textile end product for the first time. In cooperation with the company FALKE and Dr Manvi, who supervised Ms. Wissel's work, the yarn was used to produce a sock (see figure "FALKE sock with carbon dioxide filaments").

By reusing carbon dioxide from industrial waste as a raw material for textile and clothing products, the carbon dioxide balance can be improved and thus contributes directly to climate protection. The sponsorship prize of the Wilhelm-Lorch-Stiftung is endowed with 6,000 € for the specialist further training of Ms. Wissel.

Interdisciplinary training with development of a new type of measuring stand for the future-oriented research field "Smart Textiles

The development of textiles with additional digital functions, so-called "Smart Textiles", is considered a future-oriented field of research. In his project submission, ITA´s doctoral candidate Simon Kammler presented a concept for a lecture series on Smart Textiles at ITA and develops a new type of measuring stand for measuring the capacity and conductivity of fibres. The project is funded by the Wilhelm-Lorch-Stiftung with a prize money of 10,000 Euro.

Smart Textiles enable the textile to interact with the environment and the human user. Today they are therefore in demand in many areas of everyday life such as sport, health, living, life and mobility and offer completely new practical solutions. In combination with digital networked services, Smart Textiles promise support and innovation in almost all situations of daily life.

With the conception of a new lecture series, Mr. Simon Kammler is supporting ITA in its goal of providing the best possible training for young scientists. The focus is on imparting far-reaching interdisciplinary skills in order to master the challenges of current fields of research.

Background:

The Wilhelm-Lorch-Stiftung supports particularly talented young people from all areas of the textile industry. Its purpose is the promotion of subject-specific education and further education as well as the promotion of projects at universities, academic schools and vocational schools, which are characterised by the sustainable communication of innovative learning content in science and research. In total, thirteen sponsorship prizes were awarded in 2020. Due to the Corona crisis, the forum of TextilWirtschaft, which is normally the venue for the awards ceremony, unfortunately had to be cancelled in 2020.

On February 10, 2020, the Supervisory Board of SGL Carbon SE appointed Dr. Torsten Derr as Chief Executive Officer of SGL Carbon SE for the duration of five years effective July 1, 2020. In agreement with his current employer, Dr. Derr will now take up his position as CEO of SGL Carbon one month earlier on June 1, 2020. The Supervisory Board very much welcomes this development in view of the challenges that these extraordinary times pose.  

Since 2016, Dr. Torsten Derr is holding the position of Managing Director of SALTIGO GmbH, a subsidiary of LANXESS AG. Following his master degree and attainment of his PhD in chemistry at the University of Bremen, Dr. Derr began his professional career 1997 at Bayer AG, and since 2003 at LANXESS AG, where he was Vice President for Plastic Intermediates, Head of the Business Units Material Protection Products and EPDM-Elastomers, as well as holding various other management functions, amongst others as Head of Commercial & Supply Chain Excellence & Chief Commercial Officer of LANXESS AG.

Amid the rapid spread of COVID-19 around the world, DyStar’s global operations continue to adapt to the development of the situation and to mitigate potential risks or impacts across the business. While the trajectory is unknown, DyStar is guided by recommendations from the World Health Organization and the local government authorities, to proactively address situations that could possibly affect our people and customers. This is to ensure that we have effective plans and standard procedures to minimize the disruption of our global operations.

Business Continuity Plan (BCP)
As a globally operating company, each of our operating sites, manufacturing plants, offices have a Business Continuity Plan (BCP) in place to sustain our operations and the supply chains we serve. The BCP, owned by our Business Continuity Management Team, provides clear guidance for all local operations, such as Administration, Customer Services, Finance, Logistics Services, Sales and Technical Support as well as Procurement, to enable all functions to continue operating effectively to serve our customers, distributors and agents.

Emergency Response Plan (ERP)
DyStar’s manufacturing sites are also installed with an Emergency Response Procedure to cover all emergency circumstances, including the COVID-19 pandemic disease. The goal of the emergency response procedure is to mitigate the impact of such events on people and the environment, ensuring operational readiness of the site during an emergency.

As the world adjusts to the impact of the COVID-19 pandemic, DyStar will continue to monitor the situation very closely and will provide updates that adapt to the changing situation. We remain committed to provide our customers with excellent service and to work closely with all our partners throughout this difficult period.

Brown Wrote to President Outlining Critical Steps White House can Take Now to Address Shortage of Personal Protective Equipment

 U.S. Sen. Sherrod Brown (D-OH) hosted a news conference call to discuss his plan for addressing the shortage of personal protective equipment (PPE) needed by healthcare workers on the frontline of keeping Americans healthy and safe during the coronavirus pandemic.

This weekend, Brown wrote to President Trump outlining several steps the Administration should take immediately to address the shortage and ramp up manufacturing of these critical medical supplies.

In his plan and in his letter to the President, Brown lists nine steps the Administration could take immediately, including:

1. Designate a government official who can serve as a point person responsible for coordination the acquisition and development of PPE, medical devices, and other supplies necessary to fight the coronavirus pandemic. 
2. Establish a PPE and medical device assessment and database to monitor the supply and anticipated needs for PPE, ventilators, diagnostic test kits, and other needed medical supplies to respond to the coronavirus pandemic. 
3. Publish a list of PPE, medical device, and general medical supply needs to respond to the coronavirus pandemic. 
4. Establish a hotline capable of handling significant call capacity that will provide U.S. producers centralized information about the results of the national assessment and the current need for PPE, devices, and other health care supplies. 
5. Provide immediate funding to manufacturers to purchase equipment, retool machinery, hire additional workers, and cover any other expenses needed to increase production of PPE and necessary medical devices and supplies.
6. Streamline contract and certification procedures to ensure production and delivery of materials are not delayed due to paperwork constraints.
7. Provide critical protections for workers who are making PPE, medical devices, and necessary supplies to receive a waiver from any shelter-in-place requirements to allow workers to volunteer to go to work in these critical industries. 
8. Provide purchase guarantees and delivery assistance of product to the communities and health care facilities that need the products most. 
9. Support companies that have the capacity to sterilize reusable equipment to alleviate the existing PPE shortage. 

In his plan, Brown also pointed out important legislative actions that will help ramp up production of these critical supplies, including expanding the strategic national stockpile authority, substantially increasing Defense Production Act funding and strengthening domestic preferences.

HeiQ, winner of the Swiss Technology Award and Swiss Environmental Award, launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment that is tested effective against coronavirus.

Since its inception 15 years ago, HeiQ has forged a solid innovation track record helping brands improve textile products. Catalyzed to action by the global fight against Coronavirus, HeiQ launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment which is proven effective against human coronavirus (229E) in face mask testing, significantly enhancing the antiviral log reduction from 2.90 of untreated face masks to 4.48, over 99.99% reduction of virus infectivity. (Remarks: a log reduction of 2 is equivalent to 100 times the effectiveness).

Chinese protective masks producer Suzhou Bolisi is the lead adopter of HeiQ Viroblock NPJ03. Treated masks will be available on the market as early as this April. American legwear manufacturer Kayser-Roth is planning to add the technology to their new product, Ghluv hands protector, while Lufeng from China is evaluating the technology on other types of fabric used for garments.

HeiQ Viroblock NPJ03 is a unique combination of vesicle and silver technologies designed to inhibit the growth and persistence of bacteria and viruses. The HeiQ vesicle technology targets lipid- enveloped viruses, such as coronavirus, providing rapid virus deactivation, while the HeiQ silver technology inhibits the replication of both bacteria and viruses. HeiQ Viroblock NPJ03 can be applied to a wide spectrum of textile surfaces including face masks, air filters, medical gowns, curtains, drapes and more. HeiQ also has a range of highly wash-durable antimicrobial and odor control textile technologies, called HeiQ Pure, combining silver-based and bio-based materials for all fabric types.

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Stephan Sielaff is a chemical engineer who gained experience in the chemical industry in the years 1993 to 2014, holding various management positions for Unilever and Symrise. Since 2014, he has worked for the Swiss specialty chemicals company Archroma, an important supplier of the textile and paper industry, as a Member of the Board of Directors and Chief Operating Officer (COO).He has been responsible for forming the integrated operational structure and the strategic development of the company.

Christian Skilich, who will assume management responsibility for the new Pulp and Wood Raw Materials Division in the Lenzing Group, boasts outstanding expertise in the field of paper and pulp technology. With a Master of Science in Paper Technology and Engineering & Economics, he first held various positions in the paper, packaging and glass industries. Since 2004, he has worked in a broad range of management areas on behalf of the internationally operating Mondi Group. Christian Skilich most recently served as Chief Operating Officer on Mondi’s Board of Directors, overseeing projects in the USA and Europe.

The Supervisory Board of SGL Carbon SE today appointed Dr. Torsten Derr as Chief Executive Officer of SGL Carbon SE for the duration of five years effective July 1, 2020. With this appointment, Dr. Derr is succeeding Dr. Jürgen Köhler, who resigned from his mandate as Chief Executive Officer of SGL Carbon SE effective August 31, 2019.  

Since 2016, Dr. Torsten Derr is holding the position of Managing Director of SALTIGO GmbH, a subsidiary of LANXESS AG. Following his master degree and attainment of his PhD in chemistry at the University of Bremen, Dr. Derr began his professional career 1997 at Bayer AG, and since 2003 at LANXESS AG, where he was Vice President for Plastic Intermediates, Head of the Business Units Material Protection Products and EDPM-Elastomers, as well as holding various other management functions, amongst others as Head of Commercial & Supply Chain Excellence & Chief Commercial Officer of LANXESS AG.

DOMO Chemicals, a global leading player in engineering nylon materials towards sustainable solutions, today announced its transition plan for the function of Chief Executive Officer. The Board of Directors of DOMO has appointed Yves Bonte to succeed current CEO Alex Segers during February 2020. Mr. Segers has held the CEO position at DOMO since the Company started its chemical activities in 1994 and will continue to play an important role in the transformation of Solvay’s European Performance Polyamide and DOMO into one company. Closing of the acquisition of Solvay’s European performance Polyamide Business by DOMO is expected to take place on January 31st.

Alex Segers commented, “I feel privileged to have been given the opportunity to work with the DOMO team over the past twenty-six years, which has really been an incredible journey. We are now entering the next level for the company by integrating very soon the European Performance Polyamides Business from Solvay. In Yves we have found the ideal person to pass the baton to. We look forward to a seamless transition.”

Gregory De Clerck, Managing Director of Domo Investment Group and Member of the Board of DOMO Chemicals commented, “I would personally like to thank Alex for his leadership in the successful growth and transformation of DOMO from an upstream nylon 6 specialist into a full integrated engineering materials company developing innovative and sustainable solutions in the Polyamide Industry. We are excited to welcome Yves Bonte to DOMO as the new CEO and Chairman of DOMO Chemicals. We believe he is the ideal person to lead the next chapter of the Company’s growth and transformation process. Alex will continue to significantly contribute to the success of new DOMO.”

Yves Bonte joins DOMO from Yara, the leading fertilizer company and a provider of environmental solutions where he held the role of Executive Vice President Industrial recently named New Business since January 2010, and was responsible for a business generating appr. 20% of Yara’s total revenue of 12.9 billion USD. Prior to Yara, he held a variety of business leadership, commercial and operations roles at Lyondell Basel and Exxon Chemicals. Since 2018 Yves is as Board Member of DOMO.

“I have a true passion for innovation and sustainability, and I am thrilled to join DOMO as its next CEO,” Yves Bonte commented. “The Company has established itself as a leader in sustainable polyamide based on its strong technology-driven product portfolio with a solid foundation to further build upon. I believe DOMO is uniquely positioned to support its customers’ manufacturing processes in a cost effective and sustainable manner. The recently announced long-term strategy and planned investment will position DOMO to reach new levels of growth and success.”

Archroma announced its transition plan for the function of Chief Executive Officer. The Board of Directors of Archroma has appointed Heike van de Kerkhof to succeed current CEO Alexander Wessels effective January 6, 2020. Mr. Wessels has held the CEO position at Archroma since the Company was established in October 2013 and will be appointed as Vice Chairman of the Company’s Board of Directors. He will also take on a Senior Advisory role within SK Capital working across its portfolio of investments, which includes Archroma.

Alexander Wessels commented, “I feel privileged to have been given the opportunity to work with SK Capital and the Archroma team over the past six and a half years, which has really been an incredible journey. We are coming off another record year in terms of profitability and the business is uniquely positioned to capitalize on its significant momentum moving forward. For me personally, this is the ideal moment to take on my next challenge and in Heike we have found the ideal person to pass the baton to. We look forward to a seamless transition and I am excited to continue to support the Company as a member of the Board of Directors.”

“I have a true passion for innovation and sustainability, and I am thrilled to join Archroma as its next CEO,” Heike van de Kerkhof commented. “The Company has established itself as a leader in sustainable chemistry based on its strong technology-driven product portfolio with a solid foundation to further build upon. I believe Archroma is uniquely positioned to support its customers’ manufacturing processes in a cost effective and sustainable manner. The investments made into research and technology during the first stage of SK Capital’s ownership have positioned Archroma to reach new levels of growth and success.”