From the Sector

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

CYD
Denim finishing is meanwhile a field in which Monforts has an undisputed lead and it has been working closely with its many partners in the key denim manufacturing countries of Bangladesh, Brazil, China, India, Mexico Pakistan and Turkey to develop advanced solutions. The latest of these is the CYD yarn dyeing system.
“CYD is based on the proven Econtrol® dyeing system for fabrics*,” explains Monforts Head of Denim Hans Wroblowski. “It integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity. The CYD system has been developed in response to a very strong market demand.”

Pre-shrinking
Monforts has also recently delivered a significant number of its latest Monfortex sanforizing lines to customers around the world.
Sanforizing is vital to final fabric quality, pre-shrinking it by compressing prior to washing, to limit any residual or further shrinkage in a made-up finished garment to less than 1%, for perfect comfort and fit over an extended lifetime.

As with industry-leading Montex stenters, Monfortex lines benefit from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

*Econtrol® is a registered mark of DyStar Colours Distribution GmbH, Germany.

Mountains of waste, plastic-infested oceans, negative CO2 footprints – the need for more sustainable ways of living has never been more urgent. Consequently, it is logical that recycling solutions are becoming increasingly important within the textile industry. This was also tapped into at the first virtual Global Fiber Congress in Dornbirn with a session that focused specifically on the topic. In front of around 400 participants, Markus Reichwein, Head of Product Management at Oerlikon Barmag, also spoke about solutions currently on the market.

As one of only manufactureres, the Oerlikon Group’s Manmade Fibers segment offers the entire mechanical recycling chain –from preparing the recycled materials, producing the melt all the way through to the textured package. Here, the company utilizes the VacuFil solution supplied by its subsidiary Barmag Brückner Engineering (BBE) –which, in addition to mastering bottle-to-bottle and bottle-to-textile processes, is also able to process textile waste into chips. This permits the running of textile production operations very much in line with the zero-waste philosophy.

VacuFil ensures a stable process in the case of recycled quality yarns
The reliable removal of contaminants is vital for a stable and efficient spinning process and outstanding yarn quality. At the same time, stable operating conditions with minimal fluctuations are essential. The greatest challenge here is the differing qualities of the bottle flakes fed into the system, as the extrusion process is barely able to balance these fluctuations. Here, the VacuFil concept counters with blending silos, which reduce the differences in the viscosity of the polymers considerably and guarantee high yarn and fabric quality.

The VacuFil concept is installed upstream to an Oerlikon Barmag POY system, which transforms the recycled melt into filament yarn of the accustomed high quality. As texturing solutions, Oerlikon Barmag offers its state-of-the-art automatic eAFK-series systems, including the latest generation of the eAFK Evo, which was unveiled at the ITMA Barcelona last year. Yarn manufacturers wishing to continue texturing manually can use the eFK series.

With the VarioFil R+, producers of smaller batches now also have a compact system with an integrated recycled materials preparation unit at their disposal. The system offers a special extrusion system for bottle flake materials, the very latest metering and mixing technology for spin-dying and expanded 2-stage melt filtration. The four spinning positions are each equipped with an Oerlikon Barmag 10-end WINGS POY winder.

While mechanical recycling has already been extensively developed, chemical recycling for mixed fabrics is still presenting the textile industry with huge challenges. The Oerlikon Group’s Manmade Fibers segment is currently working on solutions and concepts for transforming these fabrics into new textiles.

• Industrial yarn: Capacity expansion in the high-end sector

Remscheid – the Chinese industrial yarn manufacturer Zhejiang Kingsway High-Tech Fiber Co., Ltd. is expanding its production capacities by a further 40,000 tons per annum with 5 Oerlikon Barmag lines. Kingsway is already successfully manufacturing special high-quality yarns, exclusively deploying Oerlikon Barmag industrial yarn systems.

The 21 new spinning positions will be used to manufacture a broad product range: in addition to super-low-shrinkage (SLS) and high-tenacity (HT) yarn, the business also plans to produce automotive yarns for seat belts and airbags. This flexibility is made possible as a result of the Oerlikon Barmag systems’ configuration. The new systems are expected to commence manufacturing next year.

Industrial yarns for greater safety

As a quality-conscious industrial yarn producer, Kingsway has been manufacturing its sophisticated, high-end yarns on Oerlikon Barmag filament yarn systems since 2015. Alex Yang Yu Long, CEO of Kingsway, is proud of relying on engineering artistry from Remscheid: “As expected, the yarns are first-class in terms of quality. Our products are used in safety equipment, sometimes in situations where lives depend on them. Therefore, there can be no compromises. To this end, we select our partners with the utmost care."

• Move is in line with global growth strategy with a strong focus in the Asia Pacific region
• Zhejiang plant will be able to produce 50,000 tons of nylon compounds annually in the longer term
• Plant will be located in the convenient transportation port area of DuShan Pinghu city

DOMO Chemicals, a leading producer of high - quality engineering materials for a diverse range of markets, has announced plans for a new state - of - the - art plant in Zhejiang, China. The new plant will be capable of producing 50,000 tons of sustainable and innovative engineered nylon compounds each year. The company signed a new factory project through “cloud contract” with PingHu DuShan port Economic Development District on February 20, 2020. Production is expected to commence in the fourth quarter of this year.

DOMO Chemicals will invest €12 million in the new plant, which will have more than 11,500 m 2-floor space. The company plans to install multiple production lines at the first stage of development, which would offer an estimated capacity of 25,000 tons/year. There will be enough additional space available to cope with future demand requirements. The move is in line with the company’s global growth strategy with a strong focus on the Asia Pacific (APAC) region.

Sicomin continues to assert itself as the leading formulator and supplier of high-performance, bio-based epoxy resin systems with the launch of new bioresins at JEC World 2020, Hall 6, Booth 43. The group will unveil a variety of products that are each available in industrial quantities for series production within Automotive, Wind Energy and Civil Engineering.

Bio Fire Retardant Epoxy Gelcoat for Wind Energy and Infrastructure
Sicomin will showcase SGi 128, an innovative intumescent epoxy gelcoat developed specifically for fire retardant coating applications for critical components found in the Wind Energy and Civil Engineering markets.
SGi 128 Gelcoat is produced with 38% of its carbon content derived from non-oil sources and is a halogen free gelcoat that provides outstanding fire protection for epoxy laminates and extremely low smoke toxicity. Available with both fast and slow hardeners, this easy to apply epoxy system forms a much tougher and waterproof part surface than traditional intumescent coatings. Sicomin’s SGi 128 is available in industrial volumes with short lead times and has been successfully tested to EN 13501 (EUROCLASS B-S1-d0) and ASTM E84 (Class A).

NEW Bio Resin for HP-RTM processing for Automotive
Sicomin’s new bio-resin specifically formulated for HP-RTM processing, SR GreenPoxy® 28, is the sixth product in Sicomin’s renowned GreenPoxy® range. SR GreenPoxy® 28 is a fast cycle, low toxicity, third generation bio-based formulation aimed specifically at the HP-RTM moulding processes used for both high performance Automotive structural parts and aesthetic carbon fibre components. The new formulation has been optimized for fast production cycle times and superior mechanical performance and is a more sustainable alternative to traditional resins providing exceptional performance and quality for high volume programmes.

GreenPoxy® InfuGreen 810 on display with the GREENBOATS Flax 27 Daysailer on the JEC Planets
With very low viscosity at room temperature, InfuGreen 810 has been formulated to support manufacturers seeking bio-based alternatives for producing parts using injection or infusion techniques. Produced with 38% plant-based carbon content, InfuGreen 810 holds the DNV GL certification, providing extra assurance of the product’s quality, efficiency and safety standards. This high-performance epoxy infusion system is demonstrated at JEC World through the display of the GREENBOATS Flax 27 daysailer on the JEC Planets.

     Experienced people-centric leader to strengthen product and service capabilities

The leadership team of Baldwin Technology Company Inc. has appointed Joe Kline as its new President and CEO, effective January 17, 2020. Baldwin is a leading global manufacturer of innovative process-automation technology for the printing, packaging and converting industries. Acting CEO Kyle Chapman will continue as Baldwin’s Chairman, and devote greater focus to BW Forsyth Partners’ rapidly expanding portfolio. In 2012, Forsyth acquired thenpublic Baldwin and took it private.

Prior to joining Baldwin, Kline served as the president of a division in Eaton’s electrical sector. In addition, his previous experience includes commercial leadership roles at Eaton, Duke Manufacturing and Emerson. He holds a bachelor’s degree in electrical engineering from Ohio University and a Master of Business Administration in international business from Saint Louis University.

Kline’s appointment follows the 2019 appointments of four Baldwin business segment presidents: Rich Bennett at AMS Spectral UV, Tomas Anderbjer at Baldwin Precision Applications, Vince Balistrieri at Baldwin Vision Systems, and Matt Shishikura at Baldwin Japan.

The integrated sustainable network making fashion circular, Made in Italy and 100% traceable

World leading textile manufacturer Manteco presents its sustainable path for a better future: The Manteco System. A strategy and a vision shaping the company’s sustainable imprint since 1943. The system consists in the development and engineering of a production network involving 100 partner-companies from the whole supply chain “We all team up responsibly to create premium collection based on transparent , traceable  circular economy practices,” comments Matteo Mantellassi, co-CEO of Manteco.
 
To achieve meeting the demand for fair and sustainable fashion that consumers believe in, and is expected  from our clients, the company and its partners have created and accomplished to a Protocol of Sustainable Values and Commitments in line with the highest standards of the global market.

“On a hand, the protocol preserves the unique ‘genius loci’ of our territory – it respects the heritage of all our partners, from the smaller businesses to the more structured ones - on the other hand, it works like a shared compass of sustainable values, allowing the whole supply chain behind Manteco products to stand out and be competitive on the global stage” adds Mantellassi.
 
The protocol and its monitored and traceable system cover virtuous management of resources – e.g. Water, energy and chemical products - waste management and low production impact on the environment but also responsible standards in terms of employment, quality of the working environment, equal rights and anti-discrimination policies.

One of the key  results of such commitment and sustainable development is the creation of an upgraded version of the recycled wool  MWool™: a top ingredient made from premium recycled wool process guaranteed by the Manteco System.The System works like a symphony where management, measurement and controls  are not there just to test  the quality of each single phase of processes or  products , but to make sure and offer the complete traceability of Manteco production.  From raw material, to yarn, spinning, finishing, testing and final fabric.

Some productions tips about Manteco:

•  5.3 million kg of raw materials processed annually.
•  6.860 tests on raw material per year.
•  34.400 tests on finished products.
•  100% made in Italy system completely based in the Prato district since 1943.
•  Total transparency and traceability thanks to a highly skilled management system.

With a turnover of over 91m Euro in 2019 and an annual growth of 17,80% since 2012, Manteco SpA is the 4th textile company in Italy, listed in the TOP30 companies of the Italian fashion system. “The unique Manteco system adds value to our products while highlighting the sustainable path we share with all our partners both upstream and downstream”.

In the AZL Workgroup "High-Performance SMC", a project was developed in cooperation with M-Base, the IKV and the AZL partner network for the efficient and standardized provision of engineering data for SMC. Within the scope of the project, companies can participate in the definition of the required characteristic material data, the guidelines for the production of test specimens and the test specifications.
Sheet Moulding Compounds (SMC) are used in various application areas such as vehicles, electronics, construction and infrastructure.

Driven by the requirements to reduce the production costs of lightweight components, a new generation of SMC components with high mechanical properties is of highest relevance. SMC offers enormous potential to realize structural components with good lightweight characteristics at significantly reduced costs compared to conventional continuous fiber-reinforced components.
In order to further establish SMC in broad industrial applications companies participating within the AZL Workgroup recognized the value of a data bank for data harmonization of SMC to provide the possibility of easily finding the right material with its characteristics for the needed specific requirements.

“The segment of SMC is with 250,000 tons production per year the largest composites market in Europe. I am very pleased that we start now with the project of data harmonization along the complete value chain. The goal is to have a similar data base as already established by Campus® for thermoplastics and thermoplastic composites. Only with a reliable set data we can convince the engineering experts to use SMC in a larger variety of applications,” says Dr. Michael Effing, Chairman of the Board of AVK and Composites Germany.

As of right now a databank for engineered thermoplastic materials (by Campus®) already exists and is offering an immense value.
Under the lead of M-Base, Dr. CEO Erwin Baur who has successfully established the CAMPUS database, the AZL, IKV and companies along the value chain of long fibre reinforced SMC initiated to build a CAMPUS-compatible data structure and material characterization methodology during the High-Performance SMC Workgroup Meetings.

• Series order for a total of 500 units
• First SGL Carbon component project for manned autonomous aviation

SGL Carbon will begin serial production of landing gear made from braided carbon fiber material early this year. The landing skids will be installed in around 500 air taxis worldwide over the next two years.

The air taxis will be powered by several electric motors. To optimize the range of the taxis, every single gram counts. Measuring about two meters in length and 1.5 meters in width, the ultra-light landing skid will weigh less than three kilograms, making it about 15 percent lighter than a similar component made from aluminum. This increases the potential flight time capacity of the air taxi which is a key differentiator for the air taxi operator.

“With with our landing gear we help to shape this very new, promising application of manned, autonomous civil aviation. This involvement also demonstrates our wide range of services. From engineering, to prototype manufacture, to serial production with our own materials – all of our competences along the entire value chain made a contribution to the project ,” emphasizes Dr. Andreas Erber, Head of the Aerospace segment of the Composites – Fibers & Materials business unit at SGL Carbon.

The landing gear was developed in close collaboration between customer experts and specialists from SGL Carbon. The carbon fibers for the component are produced at the SGL Carbon plant in Muir of Ord, Scotland. The final part is being manufactured at the SGL Carbon site in Innkreis, Austria.

Collaborative app helps customers get their machines back up and running quickly

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, has launched Accelerate Live, a mobile app that enables machine inspection and troubleshooting in the field, providing quicker service for customers.

Accelerate Live creates a fully collaborative live environment with an instant audio/video connection between the customer facility and PCMC technicians and engineering experts. Through the use of a tablet, both participants can draw in a relative 3-D space to facilitate the troubleshooting and diagnostic process.

“When our customers’ equipment is down, we realize they don’t have time to wait for service,” said Noah Kellermann, Field Service Training Leader for PCMC. “With Accelerate Live, we can offer a rapid response to equipment issues to get machines back up and running quickly.”

Accelerate Live is a subscription-based service that works through a PCMC-provided tablet and noisecanceling Bluetooth headphones. It was developed to connect in industrial facilities that have low-bandwidth
Wi-Fi.