From the Sector

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan launched its first bio-based technology in 2019 and is fully committed to making bio-based versions of their existing textile finishes. ‘We have put ourselves on a mission to be able to extend our Bio-Based range further”, says Sven Ghyselinck, CEO of Devan. “We wanted to make an even bigger impact on circularity than before, therefore we looked into what fabric producers use a lot: softeners and moisture management systems. Only by focusing more on the large volume products, can we support the industry to have a bigger impact on sustainability. After the growing success of our natural antimicrobial BI-OME NTL, we are proud to now introduce our new natural Passerelle line”.

Passerelle Soft NTL is a durable softness technology based on vegetable ingredients. The technology is wash durable and can be used with natural fibres like hemp, cotton, but is also fit for synthetic fibres like rPES, PA. The bio content of the technology is above 85% (ASTM D6866-20).

Passerelle Quick-Dry NTL is a moisture management technology also based on vegetable ingredients. This bio-based finish enables high wicking and evaporation capability which helps to evaporate water/sweat easier and faster. The technology is also > 60% (28 days) biodegradable according to OECD 301B.

Sateri has entered into agreement with Funing Aoyang Technology Co., Ltd. (Funing Aoyang) to acquire its viscose fibre business. The acquisition is part of Sateri’s growth strategy which will bring Sateri’s total number of viscose mills in China to six and total annual production capacity to more than 1.8 million tonnes.

Funing Aoyang is a subsidiary of listed company Jiangsu Aoyang Health Industry Co., Ltd. Its 330,000-tonne per annum mill that will be acquired by Sateri under the agreement, is located in Aoyang Industrial Park, Funing County, Jiangsu Province. Sateri is a member of the RGE group of companies; RGE manages a group of resource-based manufacturing companies with global operations spanning Indonesia, China, Brazil, Spain and Canada.

Allen Zhang, Sateri’s President, said: “This acquisition will boost Sateri’s market footprint and further strengthen our ability to serve customers in eastern and northern China. We will invest in advanced technologies to upgrade the mill so as to enhance its process technology, safety and environmental performance. Through better management and operational excellence, we hope to make a positive impact to the local economy and accelerate the sustainable development of the industry.”

The closing of the acquisition is subject to procedural approvals by relevant authorities.

International technology Group ANDRITZ has successfully started up a new batt forming line at Romatex Home Textiles (Pty) Ltd., based in Cape Town, one of the largest household textile manufacturers in South Africa. The line is dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles, construction, geotextiles, medical, footwear, and as a replacement for plastic in the retail sector.

ANDRITZ has supplied Romatex with dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to provide Romatex’s technical characteristics in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve its customers and meet their requirements perfectly.

Contact restrictions, home office and altered daily lives – our lives in 2020 were radically changed. This was also the case for various sectors of the economy, including the textile and clothing industry. However, with crisis come opportunities and stimuli for change. Under the motto “Still Physical”, manufacturers recount their personal success stories in 2020 – the industry can look forward to a selection of sustainable materials curated exclusively by the PERFORMANCE FORUM Jury. Areas of focus: natural fibers that highlight wellbeing aspects, plant-based materials that make us strong and excite on an emotional level, bio-nylons and bio-based finishings that rethink function. “Still Physical – Your Success Story of 2020” will be on display online as the first of its kind within a trade fair week from 17 to 21 May 2020.

Transformation: Technology first?
The pandemic has forced us into new, primarily digital forms of living and working. Our daily lives are characterised by home offices, home schooling and online meetings. The desire for real, physically perceptible experiences has grown incessantly within the last year. In the same context, people nowadays are strongly driven by technological progress – yet how far can we allow technological change to go and how do we wish to live in the future? Long before the pandemic, the trend towards self-monitoring and control of important bodily functions developed. The sports industry developed tools to measure levels of performance and monitor bodily functions with the goal of enhancing performance. Self-optimisation, body shaping and health promotion have become standard nowadays. Staying healthy and keeping fit are now social imperatives in our performance-oriented society. The pandemic has made us rethink, made us pause – with sustainable function still in focus, yet function needs to be rethought for the future, distancing ourselves from mere performance enhancement, and embracing clothing that facilitates people in feeling good.

Touch & Feel
In a visual, digital world, one sense has been forgotten: the sense of touch. Materials trigger completely different reactions, consciously or unconsciously. Moreover, the surface texture is also decisive in the functionality of a fabric, lending it its unique characteristics. In times of contact restrictions and lockdown, there is a need for a space for emotions, for regeneration and physical wellbeing. This is also reflected in the desire for appropriate apparel that leaves a pleasant sensation on the skin. Lightweight, warm and of a softer nature, plant-based fibers fulfil the desire for comfort and promote wellbeing.

We are physical – we are nature
How will we shape and adapt the post-pandemic textile and apparel industry? The Corona crisis once again reminds us of our existential bond with the natural world. While humanity fights against the spread of a deadly virus with social isolation, one thing is doing well: our planet. It is recovering from all the exhaust gases that are released into the air daily by cars and factories. There is a shift in focus towards taking time out in nature, whether in the form of a morning run, a mountain hike or a yoga session on the grass.

Your success story of 2020
What has touched them? Which experiences have shaped their latest innovations? Does the crisis also present opportunities? The chance for something new, for a rethink, on an even more sustainable, more ecological path? Which highlights, which stories are worth communicating and where did the focus lie in 2020? Various material manufacturers already started to focus on sustainability and the cautious use of resources some time ago. Innovations in the areas of materials and in processing methods are the driving forces of the development towards more sustainability. However, we need to realign all processes and structures in our supply and production chains and adapt them to the needs of a resource-conserving, responsible industry. A pioneering example of such alignment was the decision of PERFORMANCE DAYS to only present sustainable materials at the PERFORMANCE FORUM from the November 2019 trade fair event onwards. Additionally, the setting-up of the new digital sourcing platform “THE LOOP” shows how technology can be implemented aside from material and processing innovations in such a way that our procedures and structures can be adapted to difficult conditions.

Informative & up-to-date: the digital trade fair week from 17 to 21 May 2021
As usual, the highlighted fabrics from the Focus Topic “Still Physical”, which the exhibitors have defined as their personal success stories, will be available shortly on the PERFORMANCE DAYS website highlighting all details and facets.

• Checkpoint becomes the first RFID label manufacturer to achieve ARC certification with NXP’s UCODE 9 IC

Checkpoint  Systems,  a  vertically  integrated  supplier  of RFID  solutions  for  retail,  has again  demonstrated  its  commitment  to  innovation  by becoming the first manufacturer to have an RFID inlay featuring the new NXP UCODE 9 IC certified by Auburn University’s ARC Laboratory.

The  announcement  follows  news  that  Checkpoint  recently  became  the  first  company  to achieve ARC-certification for its Impinj M700-based inlays. By setting another new standard for the  industry,  Checkpoint  are  enabling  retailers  around the  world to  further  improve  their inventory visibility, reduce costs, improve performance and increase their overall profitability.

Delivering enhanced performance
Delivering the same ARC certifications as the Vortex U8 (Spec G, K and Q), the new Vortex U9 goes one step further by meeting the requirements of Spec N.

All aspects of the retail supply chain benefit from the increased read and write sensitivity of the  Vortex  U9.    The  11%  increase  in  read  distance,  decreases the time  for  inventory  cycle counts in both sparse or densely populated environments.  It also increases the compatibility of  smaller  RFID  labels with  RFID  Point  of  Exit  (PoE)  or  loss  prevention systems.  The  write sensitivity is significantly improved which is beneficial when encoding labels in densely packed cartons during source tagging and bulk encoding operations.

Finally,  the  new  Vortex  U9  will  provide  retailers  with  added  value  when  it  comes  to sustainability. NXP’s UCODE 9 RFID IC is 18% smaller than its predecessor, reducing the carbon footprint on an individual IC basis.

Scott Mitchell-Harris, Group Vice President Checkpoint Systems, commented:  “The investment Checkpoint has made over the past few years in our manufacturing facilities is evident. We have one of the most talented development teams who are continually seeking out the latest technology with new ideas to deliver market leading label designs.”

Checkpoint’s Vortex range delivers high read rate performance in semi-automated  physical inventory control and RFID as EAS. Vortex is ISO18000-6C compliant and can be encoded and printed tocarry EPC data in several formats -RFID EPC global protocol, printed bar code and human readable text.

• Global online fashion retailer and UK supplier - Asos and Fashion-Enter Ltd. - teaming with Kornit for adoption of efficient, low-impact direct-to-fabric digital textile printing with zero water waste and accelerated production speeds

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced that global online fashion retailer ASOS and its supplier Fashion-Enter Ltd. are implementing Kornit Presto to explore the future opportunities presented by on-demand manufacturing.

Kornit Presto is the most advanced single-step solution for direct-to-fabric printing, enabling Fashion-Enter Ltd. to rapidly deliver test-and-repeat small product runs on behalf of ASOS. These production capabilities will enable ASOS and Fashion-Enter Ltd. to imprint designs on multiple fabrics at the push of a button, through a lower-impact production process that has zero water waste and accelerates production speeds by cutting out typical dyeing processes.

In Kornit’s pigment-based digital textile production capabilities and efficient workflow solutions, Fashion-Enter Ltd. sees an answer for brands serving the needs of today’s consumers, while reducing inventory waste and improving supply chain management and garment quality.

Institut für Textiltechnik of RWTH Aachen University has changed the format of the 2021 Aachen Reinforced! Symposium to an online only format. The programme was shortened to suit the new format, with presentations taking place on Monday 10th May and Tuesday 11th May.

The conference program for Monday, 10th May:
The programme will begin with exciting presentations on glass chemistry and fibres. A talk by Dr Anne Berthereau (Owens Corning Composites) on the race for always higher modulus glass fibres will be followed by a talk from Dr Hong Li (Nippon Electric Glass) on the potential of new high-strength and high-modulus glass fibres.
After two further presentations on high modulus and bioactive glass fibres from Muawia Dafir and Julia Eichhorn (TU Bergakademie Freiberg), we will learn about furnace efficiency as well as process monitoring and digitalisation in glass fibre production from René Meulemann (CelSian), Hans Gedon (Gedonsoft) and Julius Golovatchev (Incotelogy) respectively.
A presentation by Felix Quintero Martínez (Universidade de Vigo) will explore a novel method to produce ultra-flexible glass nanofibers.
The afternoon will continue with two presentations by Dr Christina Scheffler (Leibniz-Institut für Polymerforschung Dresden e.V. (IPF)) and Professor James Thomason (University of Strathclyde) in the field of glass fibre sizings and fibre-matrix interfaces. Finally, a closing presentation by Steve Bassetti (Michelman) will conclude the first day of the Symposium.

The entire conference programme is available on the website https://aachen-fibres.com/aachen-reinforced/general-information.
To register for the Symposium, use the following link: https://aachen-fibres.com/aachen-reinforced/registration

At Lectra’s Extraordinary Shareholders’ Meeting held on April 30, members voted to appoint Céline Abecassis-Moedas as a new independent director. Nominated for a period of four years, she becomes a member of the Audit Committee, the Compensation Committee and the Strategic Committee.

The appointment of Céline Abecassis-Moedas to Lectra's Board of Directors will notably strengthen the Strategic Committee, which will be called upon to examine an increasing number of investment projects in innovative companies and the continued development of our offers for Industry 4.0.

Céline Abecassis-Moedas will also draw upon her international experience as an independent director, through positions held for nearly ten years at four companies in Spain and Portugal: Europac (Papeles y Cartones de Europa) from 2012 to 2019, CTT (CTT Correios de Portugal) from 2016 to 2020, CUF since 2016, and Vista Alegre Atlantis since 2020.

Céline Abecassis-Moedas, 49, is now Dean for Executive Education and Associate Professor at Católica-Lisbon. She began her career in research at France Telecom R&D, before joining Lectra in New York as an e-business product manager in 1999, then AT Kearney in London as a consultant in 2000. From 2002 to 2005, she was Lecturer in Strategy at Queen Mary University of London, then joined Católica-Lisbon University as Assistant Professor in Strategic and Innovation Management.

From 2014 to 2020, Céline Abecassis-Moedas was also Affiliate Professor at ESCP and co-scientific director of the Lectra-ESCP Chair's "Fashion and Technology".

Céline Abecassis-Moedas is a graduate of the École Normale Supérieure de Cachan, of the Université Paris Dauphine (DEA in Scientific management methods), holder of a Ph.D. in Management from the École Polytechnique and holder of the INSEAD Certificate in Corporate Governance obtained in 2017.

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, has announced the installation of a new Fusion C printing press at flexible packaging supplier Yellowstone Plastics (affiliated with Volm Companies), located in South Idaho Falls, Idaho. The 42-inch, 10-color Fusion C began production in February.

Since the installation, Yellowstone Plastics has increased the quality and quantity of its product offerings, thanks to innovative Fusion C features including Flextreme drying, 100 percent web inspection, the Intelliprint auto-impression setting and SteadyPrint.

“We are very excited about the results we are getting out of this press,” said Lou Figueria, Director of Printing and Graphics Operations, Yellowstone Plastics. “We are running a mixture of short runs and long runs, at 1,000 to 1,200 feet per minute, and the press adjusts very nicely between the two. It is very easy to operate, and its features—such as SteadyPrint and the touchscreen HMI—have been beneficial to our printing and our operators.”

National Council of Textile Organizations (NCTO) President and CEO Kim Glas is testifying on “Supply Chain Resiliency and the Role of Small Manufacturers” before the Small Business Committee’s Subcommittee on Economic Growth, Tax, and Capital Access.
 
In written testimony submitted to the committee, Glas provides an overview of the incredible resiliency of the U.S. textile industry during the COVID-19 pandemic, the impact of the ensuing economic crisis, existing options available to small manufacturers to access capital, and policy recommendations to strengthen the entire industry domestic supply chain.

“One silver lining associated with the immense challenges posed by the COVID-19 crisis is that it afforded the domestic textile industry an opportunity to demonstrate its enormous resiliency, flexibility, and overall value to the U.S. economy,” Glas says in the testimony. “Despite the fact that there was virtually no [full] U.S. production of textile-based PPE prior to the pandemic, the heroic actions of domestic textile manufacturers resulted in the ability to supply homegrown PPE at the height of the greatest healthcare emergency our country has faced in the past 100 years.”

“As we exit the current crisis, rational federal policies are once again needed to ensure a stable overall environment where small businesses can compete and thrive, and targeted initiatives are required to ensure that domestic supply chains for critical materials, such as PPE, exist in the United States,” Glas notes.

Glas details five key policy recommendations supported by 20 trade associations and labor groups, representing the entire domestic supply chain aimed at strengthening the integrated U.S. textile sector:

• Strengthen Buy American procurement rules
• Provide funding assistance for companies to reconstitute domestic supply chains important to U.S. national and healthcare security
• Key contracting reforms
• Streamline the SBA loan application process
• Provide additional funding for workforce training

Please view the full written testimony by NCTO President and CEO Kim Glas here.