From the Sector

Koketa, a brand of premium womenswear based in Peru, has begun sampling leggings, undergarments and workout wear featuring Acteev® Protect fabric. Produced by U.S. manufacturer Ascend Performance Materials, Acteev incorporates the odor-fighting and mildew-destroying antimicrobial benefits of zinc ions embedded into the matrix of superior nylon yarns and fabrics.

“When it comes to what’s closest to your most vulnerable skin, being safe and sanitary is a top priority,” said Juan Daniel Del Carpio, commercial director for Koketa. “The Koketa woman wants beauty, comfort and protection, and a partnership with Acteev makes it easier than ever for us to deliver all three.”

Koketa garments with Acteev feature Koketa’s signature innovative styles, including unique knit patterns, on-trend colors and flattering silhouettes. The Acteev fabric is buttery-soft and breathable yet long-lasting and resistant to pilling.

Additionally, clothing made with Acteev is resistant to unwanted odors, keeping garments as fresh after 100 washes as they are on day one. The active ingredient – labeled safe by the U.S. Food and Drug Administration – targets the bacteria and microbes that can cause odor, mildew and discoloration.

“Zinc is nature’s safeguard,” said Juan Toro, global principal business development leader for Acteev in the Americas. “It is a mineral needed for human health, and we have harnessed its power to protect the garments in a natural, sustainable way.”

Maruti Printing transformed its business as the first printer in India to adopt the latest LED-UV curing technology from AMS Spectral UV, a Baldwin Technology Company. The hybrid system, which includes traditional UV modules, has been in production for nearly two years and has significantly expanded the offset printer’s capabilities for its customers, including adding the ability to print on all types of plastic substrates.

Not only does Maruti have the distinction of being an LED-UV trailblazer in India, but it also is first in the market to upgrade a high-speed, high-performance Heidelberg Speed Master 72F+L six-color printer with coating tower—which prints up to 15,000 sheets per hour—with AMS Spectral UV’s high-power AMS XP9-I Series LED-UV and P3 Smart UV curing modules.

Established in 1986 and headquartered in Ahmedabad, Gujarat, Maruti serves customers throughout India, providing offset printing of scratch cards, banners, booklets, brochures, calendars, danglers, pamphlets, posters, stickers and envelopes.

In January 2020, Maruti took delivery of two AMS XP9-I Series LED-UV modules to cure colors in the interdecks. The modules are ideal for the highest-speed curing situations that require consistent peak intensity to the substrate, which is the case for Maruti’s offset printing standard of perfection with every cure.

To cure ink, as well as a growing variety of LED coatings, Baldwin’s AMS Spectral UV modules can be located after print units, or in the press delivery after the coater. When inks and coatings are cured with LED-UV, they become instantly dry via photopolymerization, allowing for printing on any substrate, including plastics and metallized stocks. Plus, work can be immediately finished and sent to the bindery once it comes off the press, without the need for heat, spray powder or drying time.

In addition, Maruti took delivery of two P3 Smart UV curing modules for installation at the end of the press to cure any type of UV coating and expand the company’s scope of coating compatibility to general UV coatings in order to offer its customers the widest range of UV printed choices in the Indian market.

The P3 Smart UV housings are completely liquid-cooled to ensure safe, consistent performance and increased uptime, and modules feature a universal design, so that any unit can fit any print unit location. P3 modules can be changed, inspected and cleaned quickly and easily, without tools, and lamps slide and lock into place smoothly and securely.

The durability of the equipment and its chipset was a critical deciding factor in India’s climate. The latest-generation power-and-control cabinets are dust- and moisture-resistant, allowing them to withstand extreme heat and humidity, as well as powder and airborne contaminants, making the equipment ideal for operation in stressful conditions anywhere in the world. AMS Spectral UV’s latest generation of LED chips, designed for the highest-intensity curing applications, enable the curing of LED inks and coatings at record-setting speeds. They are built with resilient components, and the semi-conductor components are sealed, which allows the chips to work in a variety of rugged environments. Additionally, integrated circuits incorporated into the design electronically protect the LEDs and the entire system.

The European Alliance for SMC BMC and the AVK expert task force SMC/BMC are announcing they will organize together SMCCreate 2022, a conference about design in SMC and BMC composite materials. This conference will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

SMC and BMC are composite materials ideal for making light and intricate parts that combine structural performance with a smooth surface finish. For that reason, SMC and BMC are increasingly used in a broad range of end-use applications and markets.

Companies that have been using SMC and BMC solutions have a lot of expertise available, which can help designers to be more successful in bringing products to market. Therefore, the European Alliance for SMC BMC and the AVK expert task force SMC/BMC would like to organize together this design conference, allowing designers to learn from the experts, apply gained insights into their own designs, and broaden their horizon for new part developments.

Using SMC BMC in your part design
Within the time of only 1.5 day, the SMCCreate 2022 conference will cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability. In particular:

• How can SMC BMC help you to design great parts, bringing a combination of unique shapes and functional performance?
• How can SMC BMC help you to improve sustainability?
• What are the key steps in the design process, starting from initial idea to full production series manufacturing?
• What are the typical design challenges and solutions?
• How to best design for optimal manufacturing?
• Which are the tools available for designing in SMC BMC: design software, material data, tooling considerations?
• Practical examples of designs and components made in SMC BMC
• What’s new in the world of SMC BMC?

Date and Location
The SMCCreate 2022 Conference will be organized on April 6-7, 2022 in Antwerp (Belgium).

Black Friday is known as the world's largest shopping event, which is constantly growing in size. Rather than offering highly promoted sales, a Finnish clothing company Pure Waste joined forces with HelsinkiMissio, an NGO battling loneliness in Finland. On Black Friday, instead of buying clothes anyone can donate a friend to people suffering from loneliness.

A Global survey shows that over a third of adults experience feelings of loneliness worldwide. Many who feel lonely try to cope by shopping, which in fact has been proven to aggravate loneliness and can even cause feelings of depression.¹

This is why HelsinkiMissio, a Finnish NGO battling loneliness, and Pure Waste, a Finnish clothing manufacturer, joined forces on Black Friday. All Pure Waste’s products on their webstore have been replaced with a chance to donate for HelsinkiMissio’s important work against loneliness.

“Black Friday is known as the biggest commercial event, but for lonely people it can actually be the darkest day of the year. This is why we wanted to shed light on this issue precisely today. We hope that together with Pure Waste we’re able to raise awareness on the issue and furthermore help lonely people”, says Tuula Colliander, Executive Director from HelsinkiMissio.

Black Friday stunt is executed together with Pure Waste, a Finland-based clothing manufacturer that has never taken part to Black Friday due to their values. The company, also known as a pioneer in textile recycling, makes its clothing from 100% recycled cotton, utilizing cutting waste from the textile industry.

¹ Pieters, Rik: Bidirectional Dynamics of Materialism and Loneliness: Not Just a Vicious Cycle. Journal of Consumer Research Volume 40, Issue 4, 1 December 2013, Pages 615–631.

• Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester

With the goal to expand the offer of yarns coming from recycled raw materials for a textile more attentive to the consumption of resources, the MFT division of the Marchi & Fildi Group completes the range of metalloplastic yarns of its Gleaming collection with the insertion of 100% recycled polyester yarns coming from post-consumer material and with the GRS (Global Recycle Standard) certification.
Starting from recycled polyester with traceable origin, in compliance with environmental and social criteria extended to all the phases of the supply chain, metalloplastic yarns are obtained with the same esthetic features and performance, compared to similar products based on virgin raw materials.

“Thanks to our commitment in the research of materials, we are able to propose metalloplastic yarns produced with 100% recycled material; the film used for the production of flat yarns, too, is in recycled polyester, with a quality level that is suitable for cutting – the Company explains -. Till now it was possible to find in the market only metalloplastic yarns with not recycled polyester flat yarn, twisted with certified fibers. This represents an important step forward to implement a circular economy possibility for this kind of products too”.

The Gleaming yarns GRS certified can be supplied in gold and silver, colors and transparent, in various counts, widths and types; they are suitable for use in flat and circular knitting, weaving, hosiery and as a component in fancy yarns.

The Gleaming line, with a wide selection of yarns in stock service, represents a completion of the offer of the Marchi & Fildi Group. The Gleaming yarns are offered in different thicknesses, widths and types with both metallized and transparent, iridescent, refracting and phosphorescent effects. The collection also includes items with special features of resistance to chemical and dyeing treatments. The Gleaming metalloplastic yarns find application in the world of fashion and furniture, for creative and fancy yarns and fabrics, accessories and decorations. Products with refractive features are also used in technical items like uniforms and workwear, sport garments and accessories, external ribbons and labels.

The AVK – Industrievereinigung Verstärkte Kunststoffe – has once again presented its Innovation Awards to companies, institutes and their partners. Three composites innovations were recognised in each of the three categories – “Innovative Products/Applications”, “Innovative Processes” and “Research and Science” – at the new event JEC Forum DACH on 23 November 2021, the first edition of which was held in Frankfurt.

“As usual, the submissions included a lot of very interesting and promising products and processes this year. The Innovation Awards highlight the outstanding efficiency, cost-effectiveness and sustainability of fibre-reinforced plastics as well as the companies and institutes operating in the sector,” explains Dr. Elmar Witten, Managing Director of the AVK. The jury of leading experts from the industry honoured the following innovations this year:

Category “Research and Science”
First place in the “Research and Science” category was awarded to the German Aerospace Center (DLR) for its Bondline Control Technology (BCT). This innovative process is used for quality control and assurance of bonded joints. The core element is a porous fabric which is applied to a joining surface using an epoxy adhesive or matrix resin. Peeling away the fabric creates a chemically reactive and undercut surface and can also be used as a test to check adhesion to the substrate. BCT has potential in a variety of possible applications. For example, peel ply can be replaced by BCT fabric to produce composite components with an optimised joining surface. The cost-effective BCT peel test is suitable for coupon testing and process control. In addition, the combined adhesion test and surface pre-treatment can be used for quality assurance of bonded repairs on fibre composite structures.

Second place was taken by the Institute of Textile Technology (ITA) at RWTH Aachen University and its partners AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR with “StoneBlade – Lightweight construction with granite for the wind industry”. This innovation enables manufacturers to reduce the amount of non-recyclable materials used in rotor blade construction. At the same time, it reduces the weight of these components and improves the mechanical properties relating to the stability of wind turbines. The innovative approach replaces glass-fibre reinforced plastic in the blade components with hard rock – a natural, cost-effective and recyclable lightweight material. The slabs of rock are cut and ground to a thickness of just a few millimetres and embedded in a fibre composite laminate with carbon fibre, which stabilises them for alternating load cases. The pre-stressed material is pressure-stable in the composite and can absorb tensile forces in the event of continuously alternating loads without any loss of stiffness.

Third place went to the Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK) with its partner Mercedes Benz AG for the interdisciplinary development of a highly integrated inductive charging module for electric vehicles. The ultra-thin charging module was designed to make optimum use of space in the vehicle underbody without reducing ground clearance. An interdisciplinary approach was adopted for the development process. This involved the electrical, mechanical and process characterisation of high-frequency Litz wires, ferromagnetic foil and metal wire cloth as well as the creation of a simulation model. The result is a demonstrator for a charging system with a structural height of 15 mm and a total weight of 8 kg. It achieves a transmission efficiency of up to 92 percent at 7.2 kW nominal power and active air cooling. The hardware demonstrator was fabricated in a 3-step process using RTM and VARI techniques.

Overview of all the winners in the three categories:
Category “Innovative Products/Applications”
1st Place: “Traffic signs from Nabasco (N-BMC)” – Nabasco Products BV and Lorenz Kunststofftechnik GmbH, partners: Pol Heteren BV and NPSP BV
2nd Place: “Novel, ultratough vinyl ester resin for the construction of large marine vessels” Evonik Operations GmbH
3rd Place: “Air intake housing with a multi-material design for gas turbines” – MAN Energy Solutions SE, Leichtbau-Zentrum Sachsen GmbH and Leichtbau-Systemtechnologien KORROPOL GmbH.
Category “Innovative Processes”
1st Place: “In-mould wrapping” off-tool, film-coated, fibre composite components for exterior applications – BMW Group, Partner: Renolit SE
2nd Place: “Adaptive automated repair of composite structural components in the aviation sector” – Lufthansa Technik AG, Partner: iSAM AG
3rd Place: “Automated surface pre-treatment using VUV excimer lamps” – CTC GmbH
Category “Research and Science”
1st Place: “Bondline Control Technology (BCT)” – German Aerospace Center (DLR)
2nd Place: “StoneBlade – Lightweight construction with granite for the wind industry” – Institute of Textile Technology at RWTH Aachen University, Partners: AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR
3rd Place: “Interdisciplinary development of a highly integrated inductive charging module for electric vehicles” – Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK), Partner: Mercedes Benz AG

Submissions for the next Innovation Award can be made from the end of January 2022.

DOMOTEX will not take place in January 2022. This was announced by Deutsche Messe AG as organizer of the leading trade show for carpets and floor coverings.

"We have been fighting for DOMOTEX together with the exhibiting companies until the very end, and have been in daily communication with the industry for months," says Sonia Wedell-Castellano, Global Director DOMOTEX, Deutsche Messe AG.

"DOMOTEX is particularly affected by the impact of the Corona pandemic, as the vast majority of DOMOTEX exhibitors and attendees come from abroad. However, given the current pandemic situation, international business travel is not expected to recover in the short term," adds Wedell-Castellano.

Just over a month ago, the organizers wanted to stage DOMOTEX in the southern part of the Hannover exhibition grounds in a compact format as a Re-Start event in three halls, thus giving the industry a chance to meet physically after almost two years of pandemic.

Wedell-Castellano: "What was considered a realistic and promising Re-Start scenario a month ago, and was also well received by the market, has proven to be no longer feasible in recent days."

The organizers are looking into a DOMOTEX date later in the 2022 calendar year. 

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

Textil-recycling Technologies
Recently, ANDRITZ acquired Laroche SAS, a leading supplier of fiber processing technologies such as opening, blending, dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. The product portfolio further complements and increases the ANDRITZ Nonwoven product range. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses.

Needlepunch Technologies
Driven by the dynamic market for durable nonwovens, ANDRITZ has developed an elliptical pre-cylinder tacker – the PA3000. With this modern machine, ANDRITZ is responding to customer demands for higher capacities and lighter products. The PA3000 is an optimized cylinder pre-needleloom, which offers greater speeds and widths and has been specially developed for lighter webs. There is no friction between the web and the rolls, and there are no issues with the visual appearance.

ANDRITZ is also focusing on its latest needling technology for producing veloured felts, mainly for applications in the automotive industry.

In addition, ANDRITZ will be presenting the next generation of its batt-forming technology, the ProWin system. ProWin is a further development of ProDynTM and ProWidTM, which have achieved a high level of acceptance on the market with around 200 systems installed. This technology improves the current weight-profiling options and increases the actual production capacity.

Production of Bio-Wipes
For many years now, ANDRITZ has offered different nonwoven processes, such as spunlace and Wetlace, with one goal in mind: reduction and elimination of plastic raw materials while maintaining the high quality of the desired product properties. The latest development in this field is the ANDRITZ neXline wetlace CP line. This is a fully engineered production line, combining the benefits of wetlaid and drylaid technologies to produce a new generation of biodegradable wipes. This process achieves high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo, or linen, without chemical additives, results in a 100% sustainable fabric.

Travis Wells, JD, MBA, has been appointed as GOTS Protection Officer North America. In this newly created position, he will be identifying and advising companies that are making unsubstantiated claims regarding GOTS signage.

An increasing number of companies are eager to use GOTS certified materials and want to make claims regarding GOTS content on their finished products. However, the correct use of the trademarked logo is strictly regulated in CUGS 3.1. – The conditions for the use of GOTS signs. A GOTS claim on finished products guarantees the consumer that every single step in the textile processing supply chain was certified. As soon as one stage in the supply chain is not certified, a company may not label or mention GOTS on their final product.

As a Sustainable Supply Chain Director, Travis has more than 20 years of experience advising fashion and apparel-related businesses on sustainable sourcing, product development and manufacturing in domestic and global markets. He earned his Bachelor of Arts (B.A.) in International Studies from Vassar College, his Juris Doctorate (J.D.) in Corporate Law from George Washington University Law School and his Master of Business Administration (MBA) in Global Sustainability and Finance from the Gabelli School of Business at Fordham University.  

•  14 million for the Rhenish coal region

Shaping economic change in the Rhenish textile and coal region together with artificial intelligence (AI) - this is the goal of the WIRKsam competence centre launched at the beginning of November. The joint project, funded by the Federal Ministry of Education and Research, is researching innovative forms of work to secure employment, create attractive jobs and strengthen regional companies.
 

With a focus on the strengths of the Rhenish mining area, WIRKsam is to establish itself as a central point of contact and align various scientific institutions and their research specifically to the challenges of the regional working world. Funded by the BMBF with 14 million euros over five years, the project is fundamentally about transferring scientific findings into company practice and into the wider society. After the funding phase, the centre of excellence will continue to work independently.

Prospects: Attractive jobs in the lignite mining region
The region on the left bank of the Rhine is not only a lignite mining area, but also a historically grown textile region where technical textiles are produced today, for example for medical technology or plant and vehicle construction. This offers valuable future prospects for the employees affected by the lignite phase-out.

Against this background, the aim of the WIRKsam centre of excellence is to research the extensive possibilities of artificial intelligence for shaping the future world of work and to transfer them to companies. AI applications are used to develop innovative work and process flows to create attractive workplaces and increase the competitiveness of local companies.

Together: business and science
The special feature: research institutions and companies from the Rhenish textile industry and related sectors work together in the centre of excellence. Research partners are the Institut für Textiltechnik (ITA) of RWTH Aachen University and the Institute for Mobile Autonomous Systems and Cognitive Robotics (MASCOR) of FH Aachen University of Applied Sciences, headed by ifaa - Institut für angewandte Arbeitswissenschaft e.V. (Institute for Applied Work Science).

Nine regional companies are involved so far; more will join. AI applications are being developed and exemplarily implemented for their respective needs. In this way, the diverse potentials of AI for work design are being tested and qualification requirements derived. These results will not only increase the global competitiveness of the textile industry and other sectors; they will also secure jobs and make an important contribution to overcoming structural change in the Rhenish lignite mining area.

WIRKsam is funded by the Federal Ministry of Education and Research as part of the funding measure "Regional Competence Centres for Labour Research" and is supervised by the Karlsruhe Project Management Agency (PTKA) (funding code: 02L19C600). The WIRKsam competence centre will be based in Hürth, Germany, on the edge of the Rhenish mining area as soon as the conversion work on the former TV studios on the Euronova campus is completed.