From the Sector

Diverging development in the two business units impact fiscal year 2019 of SGL Carbon – Group guidance for 2020 confirmed

• Consolidated sales revenues in fiscal year 2019 up by 4 percent to around 1.1 billion euros
• Consolidated recurring EBIT down by 25 percent to 48 million euros; record results of graphite specialities business did not fully compensate for the weak development in the carbon fiber business
• Composites – Fibers & Materials (CFM): Cyclical und structural weaknesses impact the result of the market segments Wind Energy, Textile Fibers and Industrial Applications, which have limited strategic significance in the medium term
• Graphite Materials & Systems (GMS): Sales and earnings on record level due to strong growth in the market segments Semiconductors and Automotive
• Non-cash impairment charge of around 75 million euros was recorded at CFM in the third quarter of 2019
• Free cash flow significantly improved
• Issue of a new corporate bond and early redemption of the 2015/2020 convertible bond has significantly improved the maturity profile
• SGL Carbon confirms guidance for fiscal year 2020: sales expected slightly below previous year; recurring EBIT approximately 10 to 15 percent below previous year level
• Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: “The financial development of the fiscal year 2019 conceals the fact that our strategic orientation is correct. This is evident from our growth and the increasing number of contracts and projects we acquired in our strategic core markets. Main drivers are the topics of sustainable mobility and energy as well as digitization. Therefore, we expect that we can grow our consolidated revenue by a mid to high single-digit percentage per year on average between 2020 and 2024.“

The fiscal year 2019 developed very differently in the two business units of SGL Carbon. The record results in the graphite specialities business could not fully compensate for the weak development in the market segments Wind Energy, Textile Fibers and Industrial Applications in the carbon fiber business. Group sales grew by 4 percent to 1.1 billion euros. Recurring Group EBIT declined by 25 percent to 48 million euros. Due to the ongoing weakness in the market segments Textile Fibers and Industrial Applications the business unit CFM recorded a non-cash impairment loss of 75 million euros in the third quarter of 2019. With minus 90 (prior year: plus 41) million euros, consolidated Group result declined significantly compared to last year’s good results. The Group confirms its guidance for 2020 published in October 2019.

Group sales are expected to decline slightly compared to the prior-year level, whereas Group recurring EBIT is expected to reach a result around 10 to 15 percent below the prior-year level. Consolidated net result of the Group in 2020 should strongly improve compared to prior-year level to a low double-digit loss.

• Group sales increases by approximately 6 percent compared to the prior year period to 832 million euros due to organic growth in the market segments Digitization, Energy and Chemicals
• Group recurring EBIT at around 54 million euros; adjusted for a positive one-time effect in the prior year approximately on the comparable level of the prior year
• Business unit Composites – Fibers & Materials (CFM) deteriorated substantially in the third quarter 2019 due to the weak development in the market segments Textile Fibers, Wind Energy and Industrial Applications; Graphite Materials & Systems (GMS) developed better than expected on the very good level of the prior quarter reaching overall a record high level in 9M/2019
• Free cash flow from continuing operations improved significantly in the first nine months
• Impairment testing triggers a non-cash impairment charge of approximately 75 million euros in CFM in the third quarter
• Revised guidance of October 25, 2019: Recurring EBIT at CFM in a negative mid-to-high single digit million euros amount and on Group level at 45 to 50 million euros
• Countermeasures initiated to improve earnings of CFM
• Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: ”The structural growth drivers remain intact in our strategically relevant markets. The countermeasures to improve earnings of CFM will be implemented consistently.”

In the third quarter 2019, the business units of SGL Carbon developed very differently. While Graphite Materials & Systems (GMS) showed better than expected results, Composites – Fibers & Materials (CFM) deteriorated compared to the two previous quarters. This is attributable to the weaker development in the market segments Textile Fibers and Industrial Applications. In total, sales revenue in the first nine months 2019 grew by approximately 6 percent to reach 832 million euros. Recurring Group EBIT after nine months reached approximately 54 million euros. Adjusted for a positive one-time effect in the prior year, this was comparable to the prior year level.

In its ad-hoc notification of October 25, 2019, the company revised its guidance for recurring EBIT of CFM downwards to a negative mid to high single digit million euro amount. On the Group level the company now expects a recurring EBIT at 45 to 50 million euros. Due to the lower starting point in 2019 as well as the ongoing weakness in the market segments Textile Fibers and Industrial Applications in the business unit CFM a non-cash impairment charge in the amount of approximately 75 million euros was recorded in the third quarter 2019. In recent years acquired assets of the former joint ventures with BMW and Benteler were not affected by this impairment. In addition, the impairment charge of CFM led to a valuation allowance on deferred tax assets in the amount of 7.4 million euros. Against this background, SGL Carbon now expects a net result of approximately minus 100 million euros for fiscal year 2019.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS
Thanks to a unique patented stitching yarn, the glass NCF reinforcement (G-PLY™) developed by CHOMARAT offers new possibilities in thermoplastic RTM and organosheet processes. “This is an especially innovative solution, utilizing stitching yarns that are compatible with processing temperatures to 400°C. These multiaxials improve the performance and provide a lot of construction freedom in terms of fibre orientation. These new design possibilities contribute to structural optimization. The quest for more lightweight vehicles, shorter cycle times and lower cost is a major issue for all builders,” explains CHOMARAT Automotive Market Manager Francisco De Oliveira.
This new heat-stable G-PLY™ reinforcement can withstand very high processing temperatures without deformation and provides optimal mechanical performance.

A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
For the first time, CHOMARAT is exhibiting an infusion-moulded laminate made with 150 plies of its new unidirectional carbon C-PLY™. This 600g/m², high-permeability NCF can be used to create extra-thick structures, in particular the wind-turbine blade stiffeners, or spar caps. “Cost reduction is the challenge in the wind energy industry. Increasing the blade length by incorporating carbon stiffeners increases power, and so it also lowers the cost of the energy,” says CHOMARAT Wind Energy Market Manager Raphaël PLEYNET. The carbon UD developed by CHOMARAT provides a solution to achieve the goal to optimize the weight/power ratio. The UD’s high permeability reduces cycle times and lowers the blade production costs.

Professor Sung Ha from the University of Hanyang will give a conference on composite challenges in the wind energy sector at 11:30 am on Wednesday, 7 March 2018 at JEC World.
Established in 1898, CHOMARAT is an international industrial textile group, involved in three businesses: Composites Reinforcements, Construction Reinforcements, Coatings & Films–Textiles. The privately held company operates in France, Tunisia, the United States and China to service its global customers.
CHOMARAT leads a strong innovation strategy, rising to challenges, developing materials for the future. Hence, the Group invests in new technologies and enters into collaborative research programs with universities and technical centers worldwide.
CHOMARAT offers strong technical know-how and mastery of complex technologies in fields ranging from automotive, aerospace, sports, energy, marine, construction, and also in markets requiring creativity and expertise, like luxury goods.