From the Sector

imm cologne will not take place on the planned dates in January 2022 in Cologne. The executive board of Koelnmesse reached this decision in close consultation with the Association of the German Furniture Industry (VDM) and in agreement with other well-known industry representatives at the international level. "This step is restricted exclusively to imm cologne and its specific requirements for trade fair operations. We are principally planning, as before, to carry out our spring events in 2022. The political guidelines allow for this, and, following the excellent and safe course of the past autumn trade fairs, this must remain our mission in the interests of the participating industries“, says COO Oliver Frese.

The VDM, as the industry sponsor of the event, and against the background of the current pandemic situation, sees the economic success of the event and thus the successful restart of imm cologne in January as extremely endangered. "Following consultation with numerous exhibitors, industry representatives and trading partners, there is either no question of participation on the part of German exhibitors or exhibitors from the German-speaking region, or this is very much in doubt", according to Jan Kurth, CEO of the VDM.  Similar feedback also came from many European countries.

"The current special basic conditions in the interior design industry make the practicability of imm cologne almost impossible", according to Oliver Frese. "We didn't make this very bitter decision easy for ourselves, but consider it to be our obligation to take this step now in close consultation with the industry. In this way we provide clarity and planning security in the interests of our exhibitors. In our shared perspective, an imm cologne with its claim as a leading trade fair for the interior design industry is not realisable in the current situation", the COO continues. "We are currently working actively on options for also still being able to offer exhibitors of imm cologne an attractive trade fair presence at the international level. Here, both spoga+gafa and ORGATEC present excellent alternatives in the interior design portfolio of Koelnmesse".

The cancellation is restricted to imm cologne and expressly does not include other B2B events planned for spring 2022 in Cologne. In autumn, the Cologne art fairs and the nutrition fair Anuga, among others, demonstrated that trade fairs are also once again possible at the international level and can be carried out safely for everyone. It is currently quite clear how differently individual industries are reacting to the present situation. "We have determined a heterogeneous estimation among the exhibiting companies in the face of the enduring pandemic situation in Germany", according to Oliver Frese, COO of Koelnmesse. The assessments vary in degree specific to different industries, "sometimes with a greater impact on the respective trade fair and sometimes hardly palpable", the COO continues. "In the interests of cooperation in a spirit of trust, we are of course communicating closely with our industries and customers, in order to be able to reach just these kinds of industry-specific decisions," according to Frese.

The hygiene and safety concept of Koelnmesse, which remains entirely in keeping with the decisions of the Minister-President Conference and the Corona Protection Ordinance of NRW, stands for safe processes.

A positive picture was still taking shape for imm cologne as a whole with the end of the term for cancellation without penalties in mid-October: with 600 exhibitors from more than 50 countries, the event would still have been the largest and most relevant forum for the interiors industry, hosted in Europe’s biggest furniture market, even in this smaller form in terms of numbers.

The professional exchange and the networking between internationally active companies and highly qualified trade visitors provide the basis at every imm cologne for future-oriented innovations and the development of new business models. In this way, imm cologne ensures important business impulses for the industry. Koelnmesse, together with the VDM and the exhibiting industry, will therefore do everything possible to get a powerful and innovative imm cologne 2023 on its feet.        

Sateri’s Lyocell facility in Rizhao, Shandong Province, has been awarded the Sustainable Textile Production (STeP) certification for responsible production, making it the first Lyocell producer in China to be certified to the rigorous standards set by independent Swiss-based certification organisation OEKO-TEX®. Sateri’s Lyocell facility has also obtained the highest ranking of level three in the certification assessment scoring for exemplary implementation of best manufacturing practices.

Together with its earlier achievement of the STANDARD 100 by OEKO-TEX® certification that confirms its Lyocell fibre is free from any harmful substances and complies with European standards, Sateri’s lyocell products are qualified to carry the MADE IN GREEN by OEKO-TEX® product label. This label not only attests to Sateri’s Lyocell fibre as safe and manufactured in environmentally-friendly, socially responsible and safe facility, but also the Group’s commitment to higher levels of transparency and accountability through the product traceability feature of the label.

The STeP by OEKO-TEX® certification comprises three levels describing the extent to which a company has achieved sustainable production and working conditions of factories in the textile industry. The areas of assessment include chemicals management, environmental performance, environmental management, social responsibility, quality management, as well as occupational health and safety.

Sateri’s Lyocell fiber factory in Rizhao commenced operation in May 2020, with an annual output of 20,000 tonnes of Lyocell fiber. The same site houses a 5,000 tonne Lyocell pilot production line dedicated for the development of Lyocell application technology. In March 2021, the Group announced plans to expand its Lyocell annual production capacity in China up to 500,000 tonnes by 2025.

A natural and biodegradable fibre, Sateri’s Lyocell is made from wood pulp sourced from certified and sustainable plantations. It is manufactured using closed-loop technology, requiring minimal chemical input during the production process, and utilising an organic solvent that can be almost fully (99.7%) recovered and recycled.

Sateri’s Lyocell is used to produce high quality textiles and personal hygiene materials. Using a unique high technology manufacturing process, it has outstanding dry and wet strength, high uniformity and consistency, and superior quality. It blends well with various textile fibres to create different fabric styles and characteristics for wide downstream applications.

• RGE has formalised two new partnerships in Singapore to advance sustainable fashion.

The first is a three-year strategic partnership with the Textile & Fashion Federation (TaFF) to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education. The second is a five-year research collaboration with Nanyang Technological University, Singapore (NTU Singapore) on innovation in textile recycling technology.

The partnership with TaFF on its fashion sustainability programme was officially launched today. Through industry talent development and capacity building, raising corporate and consumer awareness, and innovation promotion, TaFF seeks to galvanise the fashion ecosystem towards redefining sustainable fashion.

Wilson Teo, President of TaFF, said, “Our strategic partnership with RGE marks a step forward for TaFF to expand our sustainability ecosystem throughout the fashion value chain, from materials, manufacturing, brands and technology to solutions. We have set up a Steering Committee that spans across the value chain, as a model for the industry. Together with our collaborators, we will continue to equip enterprises in the journey of sustainability. We will also work with communities to build awareness in responsible consumption and recycling.”

RGE has committed to provide nearly S$3 million funding over three years to support TaFF’s fashion sustainability programme. In addition, RGE’s Vice Chairman Bey Soo Khiang joins the programme’s Steering Committee as its Vice Chairperson.

Tey Wei Lin, President of RGE, said, “As a Singapore-based company and the world’s largest viscose producer, our business is well-positioned to support the country’s desire to advance sustainable development and to create a green economy. Our collaboration with TaFF and NTU is an investment of financial and other resources to create meaningful impact, not just within Singapore but also in the region. As part of our US$200 million investment commitment into next-generation textile fibre innovation and technology, we seek to work with innovators, industry partners, research institutions and academia to scale up solutions that will deliver cleaner and more circular cellulosic textile fibre to the masses at affordable prices.”

The launch of TaFF’s fashion sustainability programme follows the roll-out of the Enterprise Sustainability Programme (ESP) by Enterprise Singapore on 1 October 2021, which supports enterprises in their sustainability initiatives and helps them capture new opportunities in the green economy.

“Industry partnerships are pertinent to uplift capabilities of enterprises. We are very encouraged by TaFF’s efforts to drive sustainability in the textile and fashion sector as trade associations and chambers play a key role in strengthening sector-specific capabilities,” said Alan Yeo, Director of Retail & Design at Enterprise Singapore. “Collaborations with corporate partners such as RGE will also help accelerate this process. This is a good start and we hope to eventually see more companies across all sectors start to integrate sustainability alongside their growth.”

The launch event was graced by Minister of State for Trade and Industry Low Yen Ling, TaFF’s patron and Senior Minister of State for National Development and Foreign Affairs Sim Ann, CEO of Enterprise Singapore Png Cheong Boon, as well senior representatives from TaFF and RGE.

The official launch of the research collaboration with NTU is expected to take place next year. A key desired outcome from the collaboration is to complement RGE’s pilot urban-fit textile recycling plant in Singapore.

The AVK – Industrievereinigung Verstärkte Kunststoffe – has once again presented its Innovation Awards to companies, institutes and their partners. Three composites innovations were recognised in each of the three categories – “Innovative Products/Applications”, “Innovative Processes” and “Research and Science” – at the new event JEC Forum DACH on 23 November 2021, the first edition of which was held in Frankfurt.

“As usual, the submissions included a lot of very interesting and promising products and processes this year. The Innovation Awards highlight the outstanding efficiency, cost-effectiveness and sustainability of fibre-reinforced plastics as well as the companies and institutes operating in the sector,” explains Dr. Elmar Witten, Managing Director of the AVK. The jury of leading experts from the industry honoured the following innovations this year:

Category “Research and Science”
First place in the “Research and Science” category was awarded to the German Aerospace Center (DLR) for its Bondline Control Technology (BCT). This innovative process is used for quality control and assurance of bonded joints. The core element is a porous fabric which is applied to a joining surface using an epoxy adhesive or matrix resin. Peeling away the fabric creates a chemically reactive and undercut surface and can also be used as a test to check adhesion to the substrate. BCT has potential in a variety of possible applications. For example, peel ply can be replaced by BCT fabric to produce composite components with an optimised joining surface. The cost-effective BCT peel test is suitable for coupon testing and process control. In addition, the combined adhesion test and surface pre-treatment can be used for quality assurance of bonded repairs on fibre composite structures.

Second place was taken by the Institute of Textile Technology (ITA) at RWTH Aachen University and its partners AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR with “StoneBlade – Lightweight construction with granite for the wind industry”. This innovation enables manufacturers to reduce the amount of non-recyclable materials used in rotor blade construction. At the same time, it reduces the weight of these components and improves the mechanical properties relating to the stability of wind turbines. The innovative approach replaces glass-fibre reinforced plastic in the blade components with hard rock – a natural, cost-effective and recyclable lightweight material. The slabs of rock are cut and ground to a thickness of just a few millimetres and embedded in a fibre composite laminate with carbon fibre, which stabilises them for alternating load cases. The pre-stressed material is pressure-stable in the composite and can absorb tensile forces in the event of continuously alternating loads without any loss of stiffness.

Third place went to the Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK) with its partner Mercedes Benz AG for the interdisciplinary development of a highly integrated inductive charging module for electric vehicles. The ultra-thin charging module was designed to make optimum use of space in the vehicle underbody without reducing ground clearance. An interdisciplinary approach was adopted for the development process. This involved the electrical, mechanical and process characterisation of high-frequency Litz wires, ferromagnetic foil and metal wire cloth as well as the creation of a simulation model. The result is a demonstrator for a charging system with a structural height of 15 mm and a total weight of 8 kg. It achieves a transmission efficiency of up to 92 percent at 7.2 kW nominal power and active air cooling. The hardware demonstrator was fabricated in a 3-step process using RTM and VARI techniques.

Overview of all the winners in the three categories:
Category “Innovative Products/Applications”
1st Place: “Traffic signs from Nabasco (N-BMC)” – Nabasco Products BV and Lorenz Kunststofftechnik GmbH, partners: Pol Heteren BV and NPSP BV
2nd Place: “Novel, ultratough vinyl ester resin for the construction of large marine vessels” Evonik Operations GmbH
3rd Place: “Air intake housing with a multi-material design for gas turbines” – MAN Energy Solutions SE, Leichtbau-Zentrum Sachsen GmbH and Leichtbau-Systemtechnologien KORROPOL GmbH.
Category “Innovative Processes”
1st Place: “In-mould wrapping” off-tool, film-coated, fibre composite components for exterior applications – BMW Group, Partner: Renolit SE
2nd Place: “Adaptive automated repair of composite structural components in the aviation sector” – Lufthansa Technik AG, Partner: iSAM AG
3rd Place: “Automated surface pre-treatment using VUV excimer lamps” – CTC GmbH
Category “Research and Science”
1st Place: “Bondline Control Technology (BCT)” – German Aerospace Center (DLR)
2nd Place: “StoneBlade – Lightweight construction with granite for the wind industry” – Institute of Textile Technology at RWTH Aachen University, Partners: AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR
3rd Place: “Interdisciplinary development of a highly integrated inductive charging module for electric vehicles” – Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK), Partner: Mercedes Benz AG

Submissions for the next Innovation Award can be made from the end of January 2022.

Stahl, an active proponent of responsible chemistry, today announces that – by the end of Q2 2022 – it will extend its GHG reduction targets to cover Scope 3 emissions. This step underlines Stahl’s commitment to aligning its strategy with the 2015 Paris Climate Agreement goals, updated at the recent COP26 in Glasgow.

Between 2015 and 2020 Stahl reduced its Scope 1 and 2 (direct) GHG emissions by 37%, and has committed to a further 2% reduction each year to 2030. Scope 3 emissions cover all the indirect emissions that can occur in a company’s value chain, including raw material acquisition, transportation, and the end-of-life impact of its products. By focusing on Scope 3 emissions, Stahl is committing to de-fossilizing its supply chain and ensuring further accountability for its total environmental impact.

Michael Costello, Stahl Group ESG Director: “Only by focusing on reducing Scope 3 emissions can we accurately align our de-fossilization strategy with the global goal of limiting global average temperature increase to 1.5°C, as agreed at the 2015 Paris Climate Agreement and the COP26 in Glasgow. We look forward to working with partners across our industry and value chain to make this happen.”

Stahl, an active proponent of responsible chemistry, has taken an important step toward realizing its target of having lifecycle assessment (LCA) data for all strategic products by the end of 2023. By working closely together with Spin 360, a tech-enabled sustainability consultancy, Stahl has achieved certification of LCA data generation systems, allowing verifiable information to be collected for its products.
LCA is a methodology that measures the impact of any product on the environment over the course of its life. The LCA methodology can provide quantitative data in a format that permits comparisons to be made. The certification of LCA data generation systems is a foundational step to ensuring the accuracy and reliability of future LCA analyses.

Through close collaboration, Stahl and Spin 360 have implemented an Environmental Product Declaration (EPD) system – certified by Bureau Veritas – at Stahl’s site in Palazzolo, Italy. An EPD is an independently verified and registered document that communicates transparent and comparable information about the environment impact of products across their entire lifecycle. This implementation underlines Stahl’s commitment to enabling the sustainable development of its industry by driving accountability and transparency.

Michael Costello, Stahl Group ESG Director: “One of Stahl’s strategic ESG goals is to collect verifiable, high-quality LCA data for its products, thereby paving the way to lowering the environmental impact of the whole supply chain. This EPD system certification is an important achievement, and a key step in realizing this goal. Looking ahead, we’ll continue to work with our partners to enable our certified LCA data availability and shape a better industry.”

Federico Brugnoli, CEO of Spin 360: “We are very proud to have supported this complex process that will ensure the complete reliability of Stahl’s LCA data. Now we will look at the next steps in supporting Stahl, focusing environmental footprint reductions through science-based evolution of the industry. We’re confident that – together – we can ensure a better future for us all.”

Showing its leadership, ROICA™ marks a milestone in the world of stretch, enhancing a contemporary wardrobe made of new generation values that are fully conveyed and visible to the end consumer. Indeed, by creating cutting-edge tools, such as the hangtags that provide, through simple and well-designed icons, clear and concise functional information showing for each application the values and performances of each single ROICA™ families: ROICA Colour Perfect ™, ROICA Resistance™, ROICA Feel Good™, ROICA Eco-Smart™, ROICA Contour™.

On top of this, in order to ASSURE that what is labelled as ROICA™ Sustainable truly reflects the brand’s new generation values, the company created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family. A big step toward complete transparency and transparent AUTHENTIC communication.
ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

At MarediModa – the international fair dedicated to fabrics and accessories for the beachwear, underwear and athleisure sectors - ROICA ™ partners such as Eusebio, Iluna Group, Interjersey Milano, Maglificio Ripa, Penn Textile Solutions GmbH, Piave Maitex and Sofileta shared their latest fabric innovations where sustainability cutting-edge performance and design realized with ROICA™ premium stretch ingredient, were on stage.

For its 2021 Green Collection, the Italian luxury hosiery brand Sarah Borghi presents a broadened product offer in terms of colors and categories, meeting the needs of a stylish, yet sustainable consumer. By mixing fashion, quality, innovation and research, the tights and stockings powerhouse continues its development in the journey towards a conscious future.

The evolution of the Green Collection, the sustainable hosiery collection first launched in 2020, confirms the efforts of the brand in promoting a new generation of attractive fashion and design which actively encourages and supports a responsible change in culture and smart products offer.

Lately, a decisive step has been added to the brand’s history thanks to the publication of the Integrated Report by Gizeta Calze, Sarah Borghi’s top-notch producer and first Italian company in the hosiery sector to include sustainability throughout its business model. A commitment of responsibility and transparency on a path that has been carried on for years and that, today more than ever, becomes of the utmost importance, as stated by Luca Marzocchi, CEO of Gizeta Calze. The Integrated Report provides a complete view of the business strategy, operating model and governance, which combines financial information with sustainability insights, conceived as complementary to other strategies and, indeed, essential for increasing business value.

The collection
The collection presents a range of versatile, colorful products combined with extra-luxury comfort and designed for every type of woman: from seductive tights to everyday socks, together with knee- highs, up to athleisure with leggings.
 
The responsible collection features two new generation materials. One is Amni Soul Eco®, the world’s first biodegradable in anaerobic conditions polyamide 6.6 yarn that degrades in around 5 years* after disposing of in landfill, developed by SOLVAY and produced and distributed by FULGAR. The other is ROICA™ V550 by leading fiber manufacturer Asahi Kasei, a premium sustainable stretch yarn boasting the Gold Level Material Health Certificate by Cradle-to-Cradle Product Innovation Institute** as it has been evaluated for impact on human and environmental health. Moreover, it smartly breaks down without releasing harmful substances in the environment according to Hohenstein Environment Compatibility Certification. Key elements that makes ROICA™ V550 a precious choice when it comes to Circular Economy material approach.

Tonello presents O-Zone, a new garment finishing project developed with Candiani Denim, a leading brand in the denim industry.

O-Zone, just presented at Kingpins 24, represents a new leap in quality and an important step in the growth of Tonello'a range of ozone processes, which are born from direct experience, research and a deeper knowledge of technology.

First with ECOfree2, then with SaniCare and OBleach, now with O-Zone, Tonello are defining ozone finishing and taking it to its maximum expression in every field of application: creation of special effects, garment sanitization, cleaning and reduction of water consumption, etc.

What is O-Zone?
At first glance it is similar to a cabinet. A special cabinet, however, inside which the garments are placed and treated, through an innovative, sustainable, responsible process.

A process that is also flexible, fast, safe and fully controllable by a touch screen that allows you to easily set all the desired parameters to obtain unique and customizable aesthetics, such as localized discoloration and lightening, sun-faded looks and degradé effects.

O-Zone is designed for small productions and is ideal for doing experiments and research directly on the garment, quickly verifying the result.

Kornit Digital Ltd. announced the release of its Kornit Presto MAX system for sustainable on-demand production of apparel and other textile goods. The new system will make its live debut at Kornit Fashion Week Los Angeles + Industry 4.0 Event, which the company is hosting November 2-5 to showcase technology innovations, partnerships, and proven strategies driving the business case for sustainable, on-demand production of fashion and textile goods worldwide.

Kornit Presto MAX is the first digital print system to offer white printing on colored fabrics, enhancing decoration capabilities for dark colored fabrics more broadly. It is the only single-step solution for direct-to-fabric printing, delivering the highest quality and softest feel with brilliant whites and brighter neon colors. The system is ready to incorporate future iterations and evolutions of XDi technology—3D decorative applications to produce threadless embroidery, high-density, vinyl, screen transfer, and other innovative effects.

Kornit Presto MAX is compatible with natural fabrics, synthetics, and blends, and includes advanced algorithms for smart autonomous calibration, to deliver high-quality results with short cycle times and minimal manual interruptions or defects. The system was devised for compatibility with the KornitX global fulfillment ecosystem to enable anywhere, anytime production, supporting a true distributed production model that fulfills nearer the end consumer, eliminating time and logistical waste from the experience while empowering brands to ensure quality and consistency across all systems and production sites.

Kornit Presto MAX provides the cornerstone of a smart, efficient, sustainable EcoFactory that empowers producers to cover and integrate more parts of the process, from design to finished product, to decrease their carbon footprint, use minimum manpower, and generate less waste. This means eliminating excessive time, labor, and shipping throughout the value chain, enabling proximity production to meet the accelerated demands of a web-driven global marketplace—revealing new sales channels and clever business models to grow the business long-term.