From the Sector

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

Textile innovator Devan Chemicals will launch two new technologies at the upcoming Techtextil show in Frankfurt (May 14-17). Bio-flam, a bio-based flame retardant product and Odour Breakdown, a wash durable, non-biocidal odour control solution.
As tradition goes, every two years Devan participates in Techtextil, the leading international trade fair for technical textiles and nonwovens. In the quest for sustainability and transparency every company faces these days, the new Devan technologies offer answers to product developers and portfolio designers.

Bio-flam
Some facts & figures: There are at least 5000 fire incidents each day in the EU. Yearly, about 70 000 people are hospitalised with fire-related injuries. Fires cause pollution. So sustainable fire performance of products is an economic, environmental and human necessity. Take the example of mattresses: tests indicate that when on fire, non-FR treated products give less than 5 minutes escape time. Unfortunately, that is not enough time for the fire brigade to arrive. Needless to say that to increase escape time, to reduce the risk and to save lives, products need to be flame retardant. The challenge is to obtain flame retardant properties in the most natural way, to find the right balance between safety for the people and for the planet.

Companies can do this by replacing raw materials from a non-renewable source, by bio-based FR treatments, which are made from renewable sources and do not contain halogens or heavy metals, as described in the norm EN 16785 1:2015. Bio-based FR treatments, like Bio-flam, are made from renewable, vegetable sources and enable the FR treated products to be biodegradable. The active components are 100% halogen- and heavy metal-free. A welcome innovation for the bedding industry, as the European Commission requires mattresses to be recyclable by 2030 in order to reduce landfill.

Bio-flam P307 is the first introduction in the new Devan BIO-FR family, and is biodegradable and is developed to be used on 100% cotton or cotton/viscose mixtures, in order to create an ecological concept, safe for people and planet, whatever might happen. Bio-flam P 307 is developed for mattress ticking to pass EN 597 1&2. The Devan researchers are developing other bio-based products for other market segments and for other fire standards.

• Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
• Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
• UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

Using UltraBond manufacturers finally gain the potential to cost-efficiently produce 100% recyclable carpets. In addition to the general benefits of making recycled PP available for the plastics production chain and reduced waste generation, environmental advantages and financial savings arise from a total lack of water and less energy use. As a 100% dry process, thermal bonding uses no water and results in a total absence of waste water. There is also a reduction in the VOC level of the carpet. This all leads to a significant reduction in a needlepunch carpet’s ecological footprint.

The sustainability benefits are quantified through lifecycle analysis (LCA) of an exhibition carpet application – among the primary applications for needlepunch carpets. Evaluations show that the absence of water consumption directly translates into a large energy saving of 93% when using UltraBond compared to a latex bonding solution, and also a potential annual water saving of over 20 million litres for 100 million m2 of exhibition applications in the EU. Without the addition of any other bonding agent, CO2 emissions are reduced by 35% over the full production process.

Karena Cancilleri, Vice President Beaulieu Engineered Products, Beaulieu International Group, commented, “Recyclability and achieving a greener, more cost-effective production process without compromising on current performance levels are significant unsolved topics within today’s carpet industry. By eliminating the need for latex and chemical binders through UltraBond, we offer needlepunch manufacturers a breakthrough they have been looking for that boosts environmental and economic sustainability. We see textile flooring as just the beginning. Together with our customers, we look forward to exploring the potential of this unique thermal bonding fibre in other applications such as laminated nonwovens or as an alternative to dry powders.”

Discover more about UltraBond from the Beaulieu Fibres International team at Stand B56 Hall 11, Domotex 2019 in Hannover, Germany from January 11-14, 2019.

• conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

For the third consecutive year, the Italian brand Zerobarracento was selected to embody the excellence of Italy at the Budapest Fashion Week. On November 14th, Zerobarracento will show on runway S/S 2019. The concept of connection to a fashion garment, and the idea of creating pieces to last is fundamental to this brand. 0 means: zero waste, reduced pollution, and reduced emissions. 100 means: 100% quality, Made in Italy, sustainability and transparency of the production. Patterns are developed with zero-waste techniques, that eliminates textile waste at the design stage, adopting a zero-waste design approach reduces textile waste and the demand on natural resources. The pieces are 100% made in Italy, created with premium sustainable and traceable materials.

Camilla Carrara, CEO and designer of Zerobarracento, describes the collection as follows: "garments are created with the GOTS certified Bacx™ by Centro Seta organic silks sourced from C.L.A.S.S. e.commerce and the Newlife™ transformed polyester. Shapes and colours were inspired by a Malaysian trip: simplicity and nature are blended giving life to saturated colours".
We are pleased that the collaboration with the Budapest Fashion Week lasts over time and is positive to see the growing interest for the issue of sustainability by consumers of this country.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

NO IMPACT: “Committed Accessories” expanded
It is the constant search for sustainable innovation that reveals the extent of the progress made over the past few months by Metalbottoni. For the Kingpins Show exhibition, there are many novelties in store from the company, extending its range in terms of sustainability. Firstly, there is the new MONSTER line eco-processing, special for pure denim, which – apart from metal – includes new material solutions developed through high-profile collaborations.

• Textile Exchange’s Sustainability Conference - Milan, October 22-24, 2018
• The theme of the 2018 conference is United by Action: Accelerating Sustainability in Textiles and Fashion.

The conference offers an opportunity to connect with industry pioneers and learn about cutting edge solutions and innovations in textile and apparel sustainability. As a result, C.L.A.S.S., headquartered in Milan, the global resource for smart material innovation, education, marketing and communication, will be on hand to support this year’s theme.

Many of the materials the C.L.A.S.S. team will showcase speak to circular economy such as Re.VerSo™, Bemberg™ and ROICA™ by Asahi Kasei, Iluna Group and TINTEX Textiles and many others that use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

During Textile Exchange’s Sustainability Conference, Giusy Bettoni, C.L.A.S.S. CEO and Founder and her team will have a dedicated space to engage attendees in an open discussion regarding the importance of fashion business strategies. The experience in the space, that will reflect an New York event created for C.L.A.S.S. by Ginger Design, will start with the vision of a film by Cristina Picchi that represents harmony between the various phases of the textile process and the cycles of natural elements. Visitors will walk through a three-dimensional installation designed by Cécile Feilchenfeldt to inspire creativity and explore the limitless possibilities using innovative smart materials.

“We are always proud to have a presence at international events including this year’s Textile Exchange’s Sustainability Conference. It is a great way for us to share our expertise regarding responsible innovation and new business model strategies. As C.L.A.S.S. is headquartered in Milan, we are proud that they selected our city for this year’s conference. Being held in Milan provides a chance for us to support Textile Exchange regarding smart material innovation, many of them produced in Italy.” said Bettoni.

Just off their return from Première Vision in Paris, Bettoni who is also the Sustainability Consultant for Smart Creation, recognizes the importance for her company to have a strong international presence to spread C.L.A.S.S.’ message to a global audience regarding responsible creation. 

As C.L.A.S.S. enters their second decade of business, they have expanded their business activities to include e-commerce that provides an opportunity for fashion start-up to purchase up to a maximum of 50, an initiative launched to support fashion start-ups. And a new division, C.L.A.S.S. Education, an initiative Bettoni co-founded with James Mendolia, also a Professor, Fashion Institute of Technology. Mendolia has been visiting universities to speak to fashion design, business, textiles and production students in Europe, Asia and North America to encourage attendees to infuse a new way of design thinking and move from a linear to a circular business model.   

The fourth edition of the ICNF - International Conference on Natural Fibers – Smart Sustainable Solutions will be taking place from 1-3 July 2019 in Porto, Portugal, is accepting extended abstracts of two full pages until 31st January 2019.
The Conference, focused on the latest scientific and technical advances in natural fibers will bring together more than 300 participants from universities, research and technological centers and companies.

Program topics
Following up the success of ICNF2017 held in Braga, Portugal, focusing on the topic ‘Advanced Materials for a Greener World’, next year’s ICNF is devoted to the topic ‘Smart Sustainable Solutions’.
The conference topics include:

•    New processes for natural fiber agriculture extraction and processing;
•    Natural fiber reinforced biopolymers;
•    Innovative natural fibers & structures;
•    Functional natural fibers;
•    Natural fiber modification techniques;
•    Advanced fibrous structures based on natural fibers;
•    Nanodimensional natural fibers;
•    Natural fiber based polymeric composites;
•    Green composites;
•    Natural fiber based cementitious composites;
•    Applications of natural fibers in high end sectors;
•    Analytics, modeling and prediction of properties and behavior;
•    Biomimetics;
•    Product development based on natural fibers;
•    Markets for natural fibers;
•    Sustainability of natural fibers: life cycle assessment studies;
•    Textile processing of natural fibers;
•    Properties & characterization of natural fibers & structures.

Natural Fibrenamics Award 2019
After the success of last editions, the Natural Fibrenamics Award is again included in the ICNF2019 program to award the best innovative products in the field of natural fibers. The innovative product applications will be shown during the Conference in a special showroom and evaluated by a selected jury in terms of innovation, design and functionality. The contest intends to be a showcase of the latest innovations in the field of natural fibers, both for the scientific and industrial communities.

The online abstract submission is open until January 31, 2019 at the official ICNF2019 website: www.icnf2019.fibrenamics.com

Aachen researchers have developed the adaptive textile facade green.fACade, which was presented on 2^nd August 2018 in the Aachen Faculty of Architecture of RWTH Aachen University, Germany. green.fACade is installed in front of a building like a second skin and can permanently reduce nitrogen oxide pollution in cities.

The researchers achieve the reduction of harmful nitrogen oxides (NO and NO2) by coating the facade with titanium dioxide. Titanium dioxide acts as a photo catalyst and enables the oxidation of nitrogen oxides to form washable nitrate (NO3-). Since the facade is also greened, it contributes to the conversion of carbon dioxide into oxygen by photosynthesis. In addition, a green facade creates an optical resting point in the cityscape and reduces urban heat through evaporation cooling. The enclosed pictures demonstrate how the introduction of green.fACade can have an effect. Picture 1 shows the Aachen Central Bus Station after, picture 2 before the possible introduction of green.fACade.

green.fACade is part of the innovative research project "adaptive textile facades", which uses the special properties of textiles. Thanks to its design, textiles can let sunlight and air through, thus contributing to a modern, aesthetic building design. A new feature of the research project is that further elements such as the titanium oxide coating or sun protection elements are integrated into the textile facade and placed in front of the existing building facade. The adaptive textile facade acts independently and thus reduces energy consumption through the positive climatic effects on the building facade.

"Adaptive Textile Facade" is part of a current research series with the aim of developing innovative facade constructions that are climate-neutral and increase the comfort of local residents. The research team consists of the three RWTH fields of architecture (Faculty of Architecture, PhD student architect M.Sc. Jan Serode), medicine (University Hospital RWTH Aachen, Clinic for Ophthalmology, Prof. Dr Walter) and textile technology (Institut für Textiltechnik, Prof. Dr Gries) and was able to contribute its expertise in the best possible way.

This summer the research team was supported for the first time by the Munich architectural office Auer Weber, represented by managing director Philipp Auer: "For us architects, developments in the field of textile outer shells are a special challenge. Here, highly developed textile materials and processing methods are combined with the lightness and grace of fabrics. Adaptive textile facade elements will increasingly turn the "building shell" into a "building skin", a system that not only offers weather, heat and sun protection, but is in constant intelligent exchange with its environment".

The great importance of these topics for the public was documented by the presence of Kirsten Roßels, representative of the Department of Economics, Science and Europe of the city of Aachen.  Ms Roßels explains: "As the city of Aachen, we are delighted with the innovative and future-oriented project ideas that are being developed at Aachen University, such as the adaptive textile facade. These developments underline the importance of Aachen as a city of science and I would appreciate it if these and other technologies could also become visible in Aachen in the future".

Prof. Dr Gries from the Institut für Textiltechnik sums up: "As textile researchers, we see a great opportunity to develop concrete solutions for our urban living spaces together with renowned experts from other disciplines. I'm sure we can make the urban climate more pleasant and reduce pollution."

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
  They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
• Diresul® blacks & greys, a cosmos of greys and deep black and navies
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma