From the Sector

Reset
4 results
Texaid
02.03.2023

New project “Transform Textile Waste into Feedstock”

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Today, there is a sorting gap to achieve a circular economy for textiles in Europe. To feed this new circular value chain, a significant sorting-capacity increase is needed with 150 to 250 sorting and recycling facilities nearby, as the McKinsey-study “turning waste into value” assessed.

There is also a technology and capacity gap in sorting for reuse and recycling to ensure that high quality raw materials from non-wearable textile waste can be made available on a large scale. This is why the “Transform Textile Waste into Feedstock” project was initiated by TEXAID, within the ReHubs initiative together with well-known stakeholders of the textile value chain.

The major outcome of this project will be a sorting-factory blueprint fulfilling the requirements to the future needs of fibre-to-fibre recycling, enabling the future of more sustainable textiles by using recycled fibres. TEXAID, who is leading the project, is committed to build and operate scalable sorting facilities across Europe, the first with a capacity of 50,000 tonnes by the end of 2024.

Companies like Concordia, CuRe Technology, Decathlon, Inditex, Indorama Ventures, L’Atelier des Matières, Lenzing, Marchi & Fildi, PurFi, Södra, Worn Again and others are taking part in the project to jointly evaluate technologies and the business case for scaled sorting for reuse and recycling. ITA Academy GmbH (in cooperation with RWTH Aachen) together with CETIA has been commissioned for the assessment of technologies. The outcome will be an innovative sorting system 4.0, building on cross-functional technologies with digitalization and automation are at the heart.

(c) TEXAID
21.12.2022

TEXAID introduces recycled tote bag with a digital product passport

With the aim of increasing the use of post-consumer fibers in textiles, TEXAID launches a white tote bag. The fabric is a mixture of 50% used textile waste collected by TEXAID in Switzerland and Germany. At TEXAID's largest sorting facility in Apolda, Germany, white cotton textiles that can no longer be worn were sorted out and later spun, woven, and manufactured in Italy. Plastic waste makes up the other 50%. Unifi rescued this ocean-bound plastic waste and recycled it into fiber.

The cotton material was transformed into a fiber by Marchi & Fildi in Biella, IT, which was then spun into a yarn using recycled cotton and recycled polyester fibers. This yarn was woven into textile by Tessitura Casoni.T.F.C.. The care label and flag label were produced by the German company Bornemann-Etiketten GmbH, and an NFC chip from circular.fashion was also integrated into the product. All components were then assembled into this bag in Tuscany by benefit company Alisea Srl Società Benefit with their partner Paimex SRL and also screen printed with our design on it.

With the aim of increasing the use of post-consumer fibers in textiles, TEXAID launches a white tote bag. The fabric is a mixture of 50% used textile waste collected by TEXAID in Switzerland and Germany. At TEXAID's largest sorting facility in Apolda, Germany, white cotton textiles that can no longer be worn were sorted out and later spun, woven, and manufactured in Italy. Plastic waste makes up the other 50%. Unifi rescued this ocean-bound plastic waste and recycled it into fiber.

The cotton material was transformed into a fiber by Marchi & Fildi in Biella, IT, which was then spun into a yarn using recycled cotton and recycled polyester fibers. This yarn was woven into textile by Tessitura Casoni.T.F.C.. The care label and flag label were produced by the German company Bornemann-Etiketten GmbH, and an NFC chip from circular.fashion was also integrated into the product. All components were then assembled into this bag in Tuscany by benefit company Alisea Srl Società Benefit with their partner Paimex SRL and also screen printed with our design on it.

This NFC chip is a circularity.IDⓇ digital product passport, developed by the Berlin-based company, circular.fashion. By scanning the NFC chip on the bag with a cell phone, customers are redirected to the circularity.IDⓇ product platform. On this platform, they can find further information on the supply chain as well as instructions on how to refurbish or return the bag for proper recycling. Through this digital product passport, a total transparency over the entire bag production is enabled and for customers it is an easy and quick way to get the information they need.

The chip also allows the manual sorters to getthe product information much faster to make a better sorting decision, e.g. the fiber composition. For this purpose, circular.fashion's intelligent sorting stations are used to scan the chip. Several of these stations have been installed at TEXAID's sorting facility in Apolda, Germany, to facilitate optimized reuse and recycling decisions and ensure another life for the product or fiber.

Source:

TEXAID

Photo: Texaid
07.06.2022

TEXAID enables Textile-to-Textile Recycling

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

Collaboration enables recycling
After two years of research, product development, and most important, building partnerships in the value chain, TEXAID has been able to develop a fabric made of 100 % recycled fiber in close collaboration with our value chain partners.

The fabric is a blend of 50 % post-consumer textile waste that TEXAID has collected in Germany and Switzerland. White cotton textiles which cannot be worn, have been sorted out in a sorting facility in Apolda, Germany. The other 50% is made from ocean-bound plastic waste which is plastic with a high risk of entering the ocean which has been saved and recycled by Unifi. The fabric and bag have been produced in Italy. The cotton material has been shredded by Marchi & Fildi in Biella, IT, who then spun the recycled cotton and recycled polyester fibers into a yarn. This yarn has been woven into a fabric by Tessitura Casoni.T.F.C.

Through this proof of concept, it has been showcased that making fabrics of 100 % recycled content and with 50 % of post-consumer textiles is possible. TEXAID is looking for strong industry partners to push high-value textile to textile recycling technologies in joint projects like these.

More information:
Texaid Recycling
Source:

Texaid

(c) Marchi & Fildi Group
19.10.2021

Marchi & Fildi Group: Positive balance for 10 years of the photovoltaic installation

10 years after the installation of the photovoltaic plant in the production units in the Biellese region, the Marchi & Fildi Group takes stock of the operation and publishes the data on energy produced, consumed, and fed back into the grid.

The photovoltaic plant owned by the Group is made up of 11,385 modules divided between the three facilities in Biella (Production), Cerrione (Dyeing mill) and Verrone (Logistics), which in total cover a surface of 16,515 sq.m.

The balance to be drawn from these 10 years is a positive one: in total 22,974,828 kWh have been produced, of which 7,292,027 kWh have been used in company activities, with a saving in energy costs of approximately €1m over 10 years.  

The energy kWh produced and not used by the company was fed back into the grid and corresponds to the average annual consumption of around 4630 families.*

10 years after the installation of the photovoltaic plant in the production units in the Biellese region, the Marchi & Fildi Group takes stock of the operation and publishes the data on energy produced, consumed, and fed back into the grid.

The photovoltaic plant owned by the Group is made up of 11,385 modules divided between the three facilities in Biella (Production), Cerrione (Dyeing mill) and Verrone (Logistics), which in total cover a surface of 16,515 sq.m.

The balance to be drawn from these 10 years is a positive one: in total 22,974,828 kWh have been produced, of which 7,292,027 kWh have been used in company activities, with a saving in energy costs of approximately €1m over 10 years.  

The energy kWh produced and not used by the company was fed back into the grid and corresponds to the average annual consumption of around 4630 families.*

The Marchi & Fildi Group has always been committed to rationalising electric energy consumption with the aim of contributing towards an eco-sustainable development without compromising the rate of production and the ability to grow. In addition to producing its own electric energy, over the years, the company has also achieved an increasing number of Energy Efficiency Titles (TEE), otherwise known as white certificates. In 2021, 138 TEEs have been awarded as a result of such interventions as the introduction of LED lighting and the optimisation of the production processes which, while still as efficient as before, permit the company to reduce the electric energy consumption of the machinery.

*In the meter class for the range of 3kW to 4.5 kW, the average consumption for residential properties is the equivalent of 3,382 kWh (source: Arera Relazione annual state of services for the year 2020). The calculations are the results of an internal study conducted by the Marchi & Fildi Group.

Source:

Marchi & Fildi Group