From the Sector

Reset
3 results
20.06.2024

Sächsische Staatsregierung zollt nord-ostdeutscher Textilindustrie Respekt

Am 19. Juni 2024 trafen sich die Mitgliedsunternehmen des Verbands der Nord-Ostdeutschen Textil und Bekleidungsindustrie e.V. (vti) im Helmholtz-Zentrum Dresden-Rossendorf e.V. zur 33. Mitgliederversammlung.

Thomas Lindner, Geschäftsführer der Strumpfwerk Lindner GmbH und Vorsitzender des Vorstandes des vti, eröffnete den öffentlichen Teil der Mitgliederversammlung mit einem Überblick zur aktuellen Lage der ostdeutschen Textil- und Bekleidungsindustrie. Im Bericht des Vorstandes ging Thomas Lindner auf die komplexen Herausforderungen ein, die die mittelständisch geprägten Textilunternehmen im letzten Jahr stark gefordert haben. Nachwirkungen der Corona-Krise, Belastungen durch den Ukraine-Krieg und die gestiegenen Energie- und Personalkosten wirkten sich stark auf die Wettbewerbsfähigkeit der Mitgliedsunternehmen aus. Lindner betonte, dass angesichts vielfältiger inflationärer Einflüsse die reinen Umsatzzahlen die reale Situation in den Unternehmen nicht abbilden können. Trotz wachsender Umsätze sinken die Erträge durch gestiegene Kosten in nahezu allen Bereichen.

Am 19. Juni 2024 trafen sich die Mitgliedsunternehmen des Verbands der Nord-Ostdeutschen Textil und Bekleidungsindustrie e.V. (vti) im Helmholtz-Zentrum Dresden-Rossendorf e.V. zur 33. Mitgliederversammlung.

Thomas Lindner, Geschäftsführer der Strumpfwerk Lindner GmbH und Vorsitzender des Vorstandes des vti, eröffnete den öffentlichen Teil der Mitgliederversammlung mit einem Überblick zur aktuellen Lage der ostdeutschen Textil- und Bekleidungsindustrie. Im Bericht des Vorstandes ging Thomas Lindner auf die komplexen Herausforderungen ein, die die mittelständisch geprägten Textilunternehmen im letzten Jahr stark gefordert haben. Nachwirkungen der Corona-Krise, Belastungen durch den Ukraine-Krieg und die gestiegenen Energie- und Personalkosten wirkten sich stark auf die Wettbewerbsfähigkeit der Mitgliedsunternehmen aus. Lindner betonte, dass angesichts vielfältiger inflationärer Einflüsse die reinen Umsatzzahlen die reale Situation in den Unternehmen nicht abbilden können. Trotz wachsender Umsätze sinken die Erträge durch gestiegene Kosten in nahezu allen Bereichen.

Die Statistik des Berichtsjahres zeigt deutlich eingebrochene Umsätze bei Mitgliedsunternehmen mit 50 und mehr Mitarbeitern. Auch der Start ins Jahr 2024 zeigt einen Umsatzrückgang von über 13 Prozent im Vergleich zum Vorjahr. Lindner verwies auf jüngste Insolvenzen von Mitgliedsunternehmen als deutliches Ausmaß der Konsequenzen der Herausforderungen des vergangenen Jahres und berichtete von Abgängen unter den Mitgliedsunternehmen. Dennoch konnte der vti 5 neue Mitglieder im Berichtsjahr begrüßen.

Weiterhin ging Thomas Lindner auf die Ergebnisse der Tarifverhandlungen ein, die kürzlich nach der dritten Verhandlungsrunde zusammen mit der IG Metall erarbeitet wurden. Auch wenn die finanzielle Schmerzgrenze der Mitgliedsunternehmen erreicht wurde, ergab sich mit den vereinbarten Rahmenbedingungen für die Textilunternehmen eine Planungssicherheit für die nächsten zwei Jahre.

Professor Thomas Popp, Staatssekretär in der Staatskanzlei des Freistaates Sachsen, äußerte sich ebenfalls zur Entwicklung der wirtschaftspolitischen Rahmenbedingungen in Sachsen und richtete sich mit stärkenden Worten an die Mitgliedsunternehmen: "Es verdient höchsten Respekt, unter welch schwierigen Umständen sie sich am Markt behaupten und dem starken Druck der weltweiten Konkurrenz standhalten. Der Sächsischen Staatsregierung ist bewusst, mit welchen Herausforderungen die Textilindustrie und weitere Branchen umgehen müssen. Vor allem muss für das Thema Energiekosten dringend eine Lösung gefunden werden. Zudem sind Innovationen wichtig. Wir in Sachsen setzen auf Forschung an den Hochschulen und außeruniversitären Forschungseinrichtungen und die Innovationskraft der Branche. Mit Blick auf den demografischen Wandel brauchen wir neue Ansätze, damit die Altersabgänge der nächsten Jahre kompensiert werden können. Die gezielte Anwerbung von Fachkräften auch aus dem Ausland gehört dazu. Trotz aktueller Herausforderungen blicken wir mit Zuversicht und gesundem Optimismus nach vorn."

Der vti begrüßte mit der Veranstaltung 3 neue Mitglieder im Vorstand: Claudia Bauer, Curt Bauer GmbH, Aue, Mareen Götz, VOWALON Beschichtung GmbH, Treuen, und Baris Korlu, ONTEX Hygieneartikel Deutschland GmbH, Großpostwitz.

Zwei Vertreter von Mitgliedsunternehmen scheiden aus der Vorstandsarbeit aus: Michael Bauer, Vorstandsmitglied seit 1991 und viele Jahre stellvertretender Vorstandsvorsitzender, sowie Friedmar Götz, im Vorstand seit 2015, Vorstandsvorsitzender bis 2018.

In Würdigung ihres langjährigen und engagierten Wirkens erklärte der Vorstand in seiner heutigen Sitzung beide zu Ehrenmitgliedern.

Die 33. Mitgliederversammlung des vti zeigte deutlich, dass die ostdeutsche Textil- und Bekleidungsindustrie trotz vielfältiger Herausforderungen weiterhin entschlossen sei, ihren Beitrag zur wirtschaftlichen Entwicklung unseres Landes zu leisten. Hierzu pflege der vti eine intensive Verbandsarbeit in Form von Veranstaltungen und Seminaren. Außerordentlich hilfreich sei die enge Zusammenarbeit mit der Wirtschaftsförderung Sachsen. Insbesondere auch deren finanzielle Unterstützung bei der Durchführung von Branchentagen, Projektwerkstätten und Messeauftritten förderten die Wahrnehmung der Branche im industriellen Umfeld unseres Landes, so der Arbeitgeberverband.

Source:

Verband der Nord-Ostdeutschen Textil- und Bekleidungsindustrie e.V.

Winners of AVK Innovation Award 2023 (c) AVK
Winners of AVK Innovation Award 2023
25.10.2023

Winners of AVK Innovation Award 2023

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

Third place: “High Performance Recycled Carbon Fibre Materials (HiPeR)” – Composites Technology Center GmbH (CTC GmbH), partners: Faserinstitut Bremen e. V, Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; partners Japan: Faserinstitut Bremen e.V., Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; Partner Japan: CFRI Carbon Fiber Recycle Industry Co., Ltd., IHI Logistics and Machinery Corporation, ICC Kanazawa Institute of Technology

Innovative Processes & Methods category
First place: “Chopped Fibre Direct Processing (CFP)” – KraussMaffei Technologies GmbH, partner: Wirthwein SE

Second place: “CIRC - Complete Inhouse Recycling of Thermoplastic Compounds” – Fraunhofer Institute for Production Engineering and Automation (IPA), partners: Schindler Handhabetechnik GmbH, Vision & Control GmbH

Third place: “CarboScreen – Sensor-Based Monitoring of Carbon-Fibre Production” – CarboScreen GmbH, partner: Institute of Textile Technology at RWTH Aachen University

Research & Science category
First place: “Development of a Stereocomplex PLA Blend on a Pilot Plant Scale” – Faserinstitut Bremen e. V.

Second place: “Fibre-Reinforced Salt as a Robust Lost Core Material” – Technical University of Munich, Chair of Carbon Composites, partners: Apppex GmbH, Haas Metallguss GmbH

Third place: “VliesSMC – Recycled Carbon Fibres with a Second Life in the SMC Process” – Sächsisches Textilforschungsinstitut e.V. (STFI), partner: Fraunhofer Institute for Chemical Technology (ICT)

 

Entries for the next Innovation Award 2024 can be submitted from January 2024 onwards.

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V.

(c) AVK - Industrievereinigung Verstärkte Kunststoffe e. V.
24.11.2021

The AVK – Industrievereinigung Verstärkte Kunststoffe – presents its Innovation Awards 2021

The AVK – Industrievereinigung Verstärkte Kunststoffe – has once again presented its Innovation Awards to companies, institutes and their partners. Three composites innovations were recognised in each of the three categories – “Innovative Products/Applications”, “Innovative Processes” and “Research and Science” – at the new event JEC Forum DACH on 23 November 2021, the first edition of which was held in Frankfurt.

“As usual, the submissions included a lot of very interesting and promising products and processes this year. The Innovation Awards highlight the outstanding efficiency, cost-effectiveness and sustainability of fibre-reinforced plastics as well as the companies and institutes operating in the sector,” explains Dr. Elmar Witten, Managing Director of the AVK. The jury of leading experts from the industry honoured the following innovations this year:

The AVK – Industrievereinigung Verstärkte Kunststoffe – has once again presented its Innovation Awards to companies, institutes and their partners. Three composites innovations were recognised in each of the three categories – “Innovative Products/Applications”, “Innovative Processes” and “Research and Science” – at the new event JEC Forum DACH on 23 November 2021, the first edition of which was held in Frankfurt.

“As usual, the submissions included a lot of very interesting and promising products and processes this year. The Innovation Awards highlight the outstanding efficiency, cost-effectiveness and sustainability of fibre-reinforced plastics as well as the companies and institutes operating in the sector,” explains Dr. Elmar Witten, Managing Director of the AVK. The jury of leading experts from the industry honoured the following innovations this year:

Category “Research and Science”
First place in the “Research and Science” category was awarded to the German Aerospace Center (DLR) for its Bondline Control Technology (BCT). This innovative process is used for quality control and assurance of bonded joints. The core element is a porous fabric which is applied to a joining surface using an epoxy adhesive or matrix resin. Peeling away the fabric creates a chemically reactive and undercut surface and can also be used as a test to check adhesion to the substrate. BCT has potential in a variety of possible applications. For example, peel ply can be replaced by BCT fabric to produce composite components with an optimised joining surface. The cost-effective BCT peel test is suitable for coupon testing and process control. In addition, the combined adhesion test and surface pre-treatment can be used for quality assurance of bonded repairs on fibre composite structures.

Second place was taken by the Institute of Textile Technology (ITA) at RWTH Aachen University and its partners AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR with “StoneBlade – Lightweight construction with granite for the wind industry”. This innovation enables manufacturers to reduce the amount of non-recyclable materials used in rotor blade construction. At the same time, it reduces the weight of these components and improves the mechanical properties relating to the stability of wind turbines. The innovative approach replaces glass-fibre reinforced plastic in the blade components with hard rock – a natural, cost-effective and recyclable lightweight material. The slabs of rock are cut and ground to a thickness of just a few millimetres and embedded in a fibre composite laminate with carbon fibre, which stabilises them for alternating load cases. The pre-stressed material is pressure-stable in the composite and can absorb tensile forces in the event of continuously alternating loads without any loss of stiffness.

Third place went to the Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK) with its partner Mercedes Benz AG for the interdisciplinary development of a highly integrated inductive charging module for electric vehicles. The ultra-thin charging module was designed to make optimum use of space in the vehicle underbody without reducing ground clearance. An interdisciplinary approach was adopted for the development process. This involved the electrical, mechanical and process characterisation of high-frequency Litz wires, ferromagnetic foil and metal wire cloth as well as the creation of a simulation model. The result is a demonstrator for a charging system with a structural height of 15 mm and a total weight of 8 kg. It achieves a transmission efficiency of up to 92 percent at 7.2 kW nominal power and active air cooling. The hardware demonstrator was fabricated in a 3-step process using RTM and VARI techniques.

Overview of all the winners in the three categories:
Category “Innovative Products/Applications”
1st Place: “Traffic signs from Nabasco (N-BMC)” – Nabasco Products BV and Lorenz Kunststofftechnik GmbH, partners: Pol Heteren BV and NPSP BV
2nd Place: “Novel, ultratough vinyl ester resin for the construction of large marine vessels” Evonik Operations GmbH
3rd Place: “Air intake housing with a multi-material design for gas turbines” – MAN Energy Solutions SE, Leichtbau-Zentrum Sachsen GmbH and Leichtbau-Systemtechnologien KORROPOL GmbH.
Category “Innovative Processes”
1st Place: “In-mould wrapping” off-tool, film-coated, fibre composite components for exterior applications – BMW Group, Partner: Renolit SE
2nd Place: “Adaptive automated repair of composite structural components in the aviation sector” – Lufthansa Technik AG, Partner: iSAM AG
3rd Place: “Automated surface pre-treatment using VUV excimer lamps” – CTC GmbH
Category “Research and Science”
1st Place: “Bondline Control Technology (BCT)” – German Aerospace Center (DLR)
2nd Place: “StoneBlade – Lightweight construction with granite for the wind industry” – Institute of Textile Technology at RWTH Aachen University, Partners: AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR
3rd Place: “Interdisciplinary development of a highly integrated inductive charging module for electric vehicles” – Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK), Partner: Mercedes Benz AG

Submissions for the next Innovation Award can be made from the end of January 2022.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.