From the Sector

• Printing Expo Online is expanding again by doubling the size of Zone 2 with new exhibitors and feature zones making it one of the largest virtual trade shows in the world.

Visitors will be able to visit the new Zaikio underground catacombs that are accessible from several portals around the show. Click on a New York taxi, a London Phone Box or a funky Hot Dog Van and you will be transported into the Zaikio cavern environment where visitors will be able to watch application videos, arrange demos and sign up to this amazing new cloud-based platform.

Another addition to Zone 2 is the new Software Technology Centre (STC). This feature area will grow over time to show a wide range of software solutions that are available on the market.

Joining Printing Expo Online in the STC for the launch is EFI Fiery, who are showing their full portfolio of software solutions.

Design’N’Buy are also a new exhibitor in the STC with their all-In-One Web2Print software solution that helps users leverage technology, people and processes for the multi-fold growth of your printing business.

Also moving into the STC will be PrintIQ who offer the modern print shop a solution for businesses that need to be able to grow and scale as needed without slowing down or sacrificing quality.

Another new addition to the show is the introduction of the Global Print Trade Club. This initiate is free to all Print Service providers around the world and offers the opportunity to network on a global scale.

New to the exhibition is Kornit Digital with their multi storey showroom which will shortly be opening its doors where visitors will be able to view Direct to Garment and Direct to Fabric printing equipment, technical data, case studies, clothing designs and applications as well as visit the Kornit dedicated auditorium where live streaming content will be shown of Kornit Digital’s Fashion weeks as they happen throughout the year.

Another addition is the new application journey added to the Xeikon Innovation Centre at Printing Expo Online. Visitors will now be able to experience a virtual tour of a living room, kitchen, bathroom, and garage where Xeikon will show applications for commercial, label and Wall Deco products that can be produced on their digital print engines.

Printing Expo Online is open 24/7 365 days a year and has now welcomed over 60,000 visitors from all over the world and continues to grow not only its footprint and total visitor numbers, but also its relevance as an important resource tool for Print Service Providers from around the world that, for whatever reason, are unable to attend live events.

Catering to the acoustic requirements of electric vehicles, Autoneum has extended its concepts for noise-reducing engine encapsulations to new applications related to electric drives. Hybrid-Acoustics PET and the foam-based alternatives Hybrid-Acoustics FLEX and Fit FLEX ensure optimum noise protection in e-cars and thus improve driving comfort. All three technologies are characterized by a high acoustic performance tailored to specific customer needs and zero waste production.

Disturbing noises such as the high-frequency sounds of e-motors and other electric devices or the whining noise of the gearbox are posing new acoustic challenges for vehicle manufacturers worldwide. Anticipating the increasing demand for sound-reducing components in both the front and the rear of e-cars early on, Autoneum has expanded its technologies for noise protection in the engine bay to new tailor-made applications for electric vehicles.

With the fibrous technology Hybrid-Acoustics PET and the two foam alternatives Hybrid-Acoustics FLEX and Fit FLEX, the Company offers three standardized technologies that reduce noise directly at the source, thereby improving driver comfort. All three technologies are produced waste-free and their adaptive capacity to different sizes and shapes allows for a broad spectrum of uses in electric vehicles: from e-motor encapsulations to the reduction of noise and vibration of inverters, gearbox, pumps and compressors. By offering both fibrous and foam-based variants, Autoneum is able to flexibly cater to individual customer needs and preferences with regard to material, acoustic concept, sustainability and costs.

In terms of sustainable noise protection in the engine bay, Autoneum’s patented innovation Hybrid-
Acoustics PET sets the tone: it is made of 100 percent PET with up to 50 percent recycled fibers; cut-offs in production are reclaimed, processed and reused and the material can be fully recycled at the end of product life. The unique textile technology, which is part of the Company’s sustainability label Autoneum Pure, is particularly suited to attenuating high-frequency sounds of the electric drive unit and offers the optimum balance of absorption and insulation. Moreover, components made of Hybrid-Acoustics PET are up to 40 percent lighter compared to standard insulators.

To accommodate the differing preferences of vehicle manufacturers, Autoneum has complemented its lightweight textile technology with two foam-based alternatives. Since the foam is injected in both technologies, no waste is generated during production either. Hybrid-Acoustics FLEX is based on the same acoustic concept as Hybrid-Acoustics PET, but the decoupler is made of foam instead of felt. Autoneum’s Fit FLEX, on the other hand, combines the foam decoupler with an injection molded heavy layer. Thanks to the high geometrical adaptability of foam to even complex shapes, both technologies offer outstanding acoustic performance in the insulation of e-motors and other noise sources in electric vehicles. Furthermore, the absorbing or insulating acoustic quality of the foam can be flexibly tuned to specific customer needs.

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 
The Automotive Cutting Room 4.0 offer is a set of solutions connected to one other: Vector, the fabric cutting equipment offering the best performance in the market; Empower, a new generation of digital services to leverage Vector's capabilities; Valia, the heart of the new offer, a software for preparing and scheduling production; and Algopex, an application for exploiting and capitalizing on all the data generated by the cutting room, so you can make the best decisions as quickly as possible.
 
Connecting up all the elements of the Automotive Cutting Room 4.0 offer delivers this unprecedented value and enables an unparalleled level of performance to be achieved. Nicolas Favreau, Lectra’s Automotive Marketing Strategy Director, explains: “When the whole cutting room process is digitalized, the data generated are centralized and accessible in real time, helping our customers to make the best decisions at every step of the production process. The benefits are huge. For example, the key performance indicators from the offer’s first users show productivity gains of around 5% and a reduction in material consumption of nearly 2%. That’s unheard of! These results, combined with the agility that the Automotive Cutting Room 4.0 brings and the complete process control, demonstrate the offer’s maximum relevance.”

The Management Board of the European Chemicals Agency has selected Dr Sharon McGuinness as ECHA’s next Executive Director. As part of the appointment procedure, she will make a statement before the European Parliament and answer questions from its members. This is tentatively scheduled for 4 July 2022.

Dr Sharon McGuinness, an Irish national, is the Chief Executive Officer of the Health and Safety Authority (HSA) in Ireland since 2018. Prior to this, she was the Assistant Chief Executive for the Chemicals and Prevention Division within the Authority, with responsibility for division management, policy provision, advice and enforcement for a wide range of occupational health and safety, chemical and market surveillance legislation aimed at protecting human health and safety for workers and consumers.

She was a member of ECHA’s Management Board between 2014-2020 and Chair of the Board between 2016-2020. She graduated from the University College Dublin with a B.Sc. (Hons) in pharmacology and chemistry, and she holds a PhD in pharmacology, as well as diplomas in Legal Studies and Company Direction.

Dr McGuinness was one of the candidates preselected by the European Commission after an open competition and interviewed by the Management Board for the post.

Her selection follows that of Bjorn Hansen who retired in March 2022. Since 1 April 2022, Shay O’Malley has been ECHA’s acting Executive Director.

The term of office of the Executive Director is five years. It may be prolonged by the Management Board once, for a further term of five years.

This year, Intertextile Shanghai Home Textiles again joins forces with NellyRodi™, the renowned French agency for international forecasting, to present the design theme for 2023 – ‘ALIVE’ – together with three trends: HUMAN CAPITAL, ROUSING COMMITMENT and UNREAL REALITIES.

Nature is a keyword in HUMAN CAPITAL
This direction reflects how people want to reconnect with the environment by choosing a local approach, short supply chains, raw and natural materials, and traditional techniques. For instance, 100% plant-based materials, as well as metalised fringed jacquards and gold yarns are used to illustrate this concept.

Inspired by everyday basics and daily essentials, the trend uses a soft, luminous white palette mingled with muted and amber shades of vegetal dyes. Designs also incorporate figurative hand-drawings, archaic bestiary, stylised wildflowers and geometric patterns.

ROUSING COMMITMENT celebrates creative self-expression
The trend combines a lively play of mix-matching patterns and colours. This embraces the integration of neutral shades through touches of metallic silver and fluorescent colours to represent the urban life.

Foamback and other fabrics influenced by sports materials, as well as extravagant jacquards, silicon embossing and bouclé fabrics draw out feel-good factor of the theme. Prints using modern twists on traditional patterns, lettering plays, exuberant florals and bold geometrics, also deliver the desire to live freely by sharing joy and happiness with others.

The fantasy of UNREAL REALITIES
In order to push the limits of imagination, science and technology, consumers tap into digital realms to connect with other realities, augmented worlds and futurist utopias that draw out the potential of today’s technology. Metalised rainbow colours highlight the magic and wonder under this virtual reality theme, while surrealistic photoprint shapes, misty landscapes, blurry effects and fantastical nature adds a futuristic touch.

The theme adopts iridescent gleam of semi-transparent voiles, muslins, recycled synthetics and added pearly or glazed aspects. Soft, light meshes, honeycombed or blistered surfaces and cloudy seersuckers elevate the textures in the fabrics.

The trends are decided by a committee led by the NellyRodi™ Agency (France) and formed by top forecasters including Mr Vincent Grégoire (France), the agency’s Consumer Trends and Insights Director; Mr Shen Lei (China), Founder and Chief of Interior Architects Design; and Ms Tracy Jen (Taiwan, China), the Host of ‘Eremito’; as well as Ms Sakina M’sa, the beloved French fashion designer and entrepreneur.

In order to integrate exhibitor and industry resources more effectively, the organisers of Intertextile Shanghai Home Textiles have announced that the Spring and Autumn editions will be merged this year. The two fairs will now be held concurrently from 15 – 17 August 2022 at the National Exhibition and Convention Center.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

On display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible by taking advantage of the fact that flat knitting as a textile production method is capable of producing end products that are shaped-to-form and with added thickness. Compared to current methods of preform production, savings in post-processing time, material, labor and associated costs are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

SHIMA SEIKI's SDS®-ONE APEX4 3D design system will be available for demonstrations as well. Of particular interest should be its ultra-realistic simulation capability that realizes Virtual Sampling. When countless variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time, cost and material normally associated with producing actual samples for each variation. When approved, the same data can be converted to machine data for immediate knitting, significantly reducing lead times.

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

‘Bio-pultrusion’:  
Composites based on natural fibres offer a number of benefits, including low density and high specific strength, vibration damping, and heat insulation. The German Institutes for Textile and Fiber Research Denkendorf (DITF) are developing pultrusion processes using bio-based resins and natural fibres. Projects include the BioMat Pavilion at the University of Stuttgart, a lightweight structure which combines ‘bamboo-like’ natural fibre-based pultruded profiles with a tensile membrane.

Applications for recycled carbon fibre (rCF):
The use of rCF in composite components has the potential to reduce their cost and carbon footprint. However, it is currently used to a limited extent since manufacturers are uncertain about the technical performance of available rCF products, how to process them, and the actual benefits achievable. Fraunhofer IGCV is partnering with the Institute for Textile Technology (ITA) in the MAI ÖkoCaP project to investigate the technical, ecological and economic benefits of using rCF in different industrial applications. The results will be made available in a web-based app.

Circularity and recycling:
The European Composites Industry Association (EuCIA) is drafting a circularity roadmap for the composites industry. It has collaborated with the European Cement Association (CEMBUREAU) on a position paper for the EU Commission’s Joint Research Centre (JRC) which outlines the benefits of co-processing end-of-life composites in cement manufacturing, a recycling solution that is compliant with the EU’s Waste Framework Directive and in commercial operation in Germany. Initial studies have indicated that co-processing with composites has the potential to reduce the global warming impact of cement manufacture by up to 16%. Technologies to allow recovery of fibre and/or resin from composites are in development but a better understanding of the life cycle assessment (LCA) impact of these processes is essential. EuCIA’s ‘circularity waterfall,’ a proposed priority system for composites circularity, highlights the continued need for co-processing.

Sustainability along the value chain:
Sustainability is essential for the long-term viability of businesses. Resin manufacturer AOC’s actions to improve sustainability include programmes to reduce energy, waste and greenhouse gas emissions from operations, the development of ‘greener’ and low VOC emission resins, ensuring compliance with chemicals legislation such as REACH, and involvement in EuCIA’s waste management initiatives. Its sustainable resins portfolio includes styrene-free and low-styrene formulations and products manufactured using bio-based raw materials and recycled PET.

111 companies from nine different countries took part in the 4th edition of one of the leading trade fairs in Turkey for occupational safety and health, TOS+H EXPO, from May 14-17, in Istanbul. Due to the ever-increasing importance of personal protection, occupational safety and a healthy workplace, TOS+H EXPO came just in time. Exhibitors were able to target a Turkish audience with the latest trends and products in industrial safety, health promotion at work and occupational safety management. The Occupational Health and Safety Symposium, which was organised by the Istanbul Chamber of Industry (ICI) was also very well attended on all four days. Current occupational safety and health issues were addressed and provided important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. A total of 4.309 visitors from 58 countries attended the 4th TOS+H EXPO.

“The remarkable outcome of TOS+H EXPO 2022 is clearly asserting its significance as the leading trade fair for the industry, in Turkey,” says Petra Cullmann, Executive Director at Messe Düsseldorf. “Our new partner, the Istanbul Chamber of Industries, paved the way for a high-caliber symposium with inspiring insights and intensive discussions, and our exhibitors again proved their expertise with a comprehensive overview of innovative products, equipment and services at the trade fair. We are proud to be sending clear signals in the market. We're giving a lead, both in Turkey and beyond, on the element that matters most: the individual.”

TOS+H Expo 2022 and the Occupational Health and Safety Symposium organized by the Istanbul Chamber of Industry were officially opened on May 14, 2022 by Ms. Petra Cullman, Executive Director Messe Düsseldorf and Sadık Ayhan SARUHAN, ICI Vice President. The new partnership with the Chamber of Industry will ensure the quality of the event and also strengthen the leading position of TOS+H Expo in Turkey.

“The Occupational Health and Safety Symposium, which we organized simultaneously with the 4th TOS+H Expo - Turkish Occupational Safety + Health Exhibition, was concluded with the presentations of 84 speakers in 22 sessions. Our symposium included highly interesting presentations on the environment, sustainability and labor law and was met with great interest by all parties and especially by representatives from all industrial sectors which deal with the topic of occupational safety and health at work. As ICI, we will continue to work to improve OHS processes in the next period”, said a spokesperson for the Istanbul Chamber of Industry.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

• Featured at FESPA Global Print Expo 2022, new cloud and mobile suite offerings help reduce costs and maximise the value of customers’ EFI printer investments

Electronics For Imaging, Inc. announced the availability of its EFI IQ™ suite of cloud and mobile applications with supported EFI VUTEk®, Wide Format, and Nozomi inkjet printers. With this cloud service, EFI™ printer users can monitor production and printer utilisation, including exact device-level consumable tracking data, to reduce downtime, reduce costs and maximise the value of their EFI printer investments. New EFI wide- and superwide-format UV LED printers will include a one-year subscription to EFI IQ. EFI inkjet printer users can also purchase IQ subscriptions for other supported printers.
 
The newly available cloud service for superwide-format production is making its debut at the 31 May - 03 June FESPA Global Print Expo in Berlin.

User-friendly with better business intelligence
According to an early user of the cloud service’s new inkjet offering – Dave Brewer, chief technology officer of California-based Image Options – “EFI IQ is a user-friendly tool that gives me better business intelligence to make better decisions.”
 
By monitoring their printer fleets in real time, EFI IQ users can reduce consumable spend, save on labour costs, improve margins, and more.

Productivity with powerful cloud tools
The decision to adopt EFI IQ comes down to several key questions owners and managers should ask themselves about business performance, including:

• Can you accurately measure ink usage?
• Is your team able to get real-time production blocking alerts?
• Are you able to compare performance metrics between printers and shifts?
• Are you able to check production status from anywhere, at any time?

The IQ suite is a management solution which has a direct connection to EFI printer data, and it gives business leaders powerful tools to handle their day-to-day production and administrative challenges. Plus, the suite’s EFI Go component helps to ensure that managers receive urgent updates wherever they are. At early user site Studio DAR in Bielsko-Biała, Poland, notifications from the mobile application allow managers and operators to keep the company’s EFI Pro 32r+ roll-to-roll printer running as much as possible.