From the Sector

Reset
 Radici: Mehr Nachhaltigkeit auf der Piste (c) RadiciGroup
Die RadiciGroup und DKB präsentieren den ersten „zirkulären“ Skianzug
01.12.2021

Radici: The sustainability our mountains deserve

  • RadiciGroup and DKB introduce the first “circular” ski suit
  • A garment made of yarn obtained from recycled materials and designed with end-of-life recyclability in mind, without compromising style, design and technical performance.
  • RadiciGroup Ski Club athletes will be the first ambassadors of this sustainability project

The first truly sustainable ski suit, featuring Italian style and design and a zero-kilometre supply chain, is finally here. Two Bergamo companies of excellence played the leading roles in the conception and realization of this highly innovative fashion-sport garment: RadiciGroup, a world leading producer of chemical intermediates, polyamide polymers, high-performance engineering polymers and advanced textile solutions, and DKB, a company specializing in technical sportswear with the same brand name.

  • RadiciGroup and DKB introduce the first “circular” ski suit
  • A garment made of yarn obtained from recycled materials and designed with end-of-life recyclability in mind, without compromising style, design and technical performance.
  • RadiciGroup Ski Club athletes will be the first ambassadors of this sustainability project

The first truly sustainable ski suit, featuring Italian style and design and a zero-kilometre supply chain, is finally here. Two Bergamo companies of excellence played the leading roles in the conception and realization of this highly innovative fashion-sport garment: RadiciGroup, a world leading producer of chemical intermediates, polyamide polymers, high-performance engineering polymers and advanced textile solutions, and DKB, a company specializing in technical sportswear with the same brand name.

The ski suit, consisting of jacket and trousers, is fashioned with a fabric made of RENYCLE, a RadiciGroup yarn obtained from mechanically recycled polyamide (nylon), which affords notable savings in energy and water consumption, as well as lower CO2 emissions. In addition, the suit’s padding and numerous accessories, such as zippers, Velcro, buttons and thread, are also made of polyamide.

This achievement was made possible by the great teamwork of RadiciGroup and DKB on the research and development of chemically compatible materials that can be used in special applications requiring high technical performance. The end result is an almost mono-material garment that significantly facilitates end-of-life recycling. It can be more easily converted into polymers for use in the manufacture of ski boot components and bindings, in addition to applications in the automotive and furnishing industries, or in any other sector requiring the characteristics of high performance polyamides.

The ski suit by RadiciGroup is thus an all-round application of ecodesign and circular economy principles to fashion and garment making, which justifies the claim “Una sostenibilità all’altezza delle nostre montagne” [Sustainability worthy of our mountains] written in a logo patch on the inside of the jacket.

“I am particularly proud of this achievement, a synthesis of my passion and effort,” said Angelo Radici, president of RadiciGroup. “I’ve always loved mountaineering and skiing, and, together with my collaborators, I work hard at our company day in and day out to find innovative solutions that improve the sustainability of our industry. This ski suit is concrete proof of the fact that textiles and apparel can be made sustainable without compromising on comfort, design, looks or performance. I will never get tired of repeating that collaboration among the firms along the production chain is crucial to manufacturing goods with an ecodesign approach, considering their end-of-life recyclability and, thus, potentially giving them unlimited durability. Upstream producers, like us, gladly share our know-how in materials chemistry and experience in recycling with our downstream partners, so that, together, we can find sustainable and viable solutions in the various sectors where we operate.”

Source:

RadiciGroup

RGE Gives Sustainable Fashion a Boost with New Partnerships in Singapore (c) RGE Group
From Left to Right: Tey Wei Lin, President of RGE, Sim Ann, Senior Minister of State for Foreign Affairs and National Development, Low Yen Ling, Minister of State for Trade & Industry and Culture, Community and Youth, and Wilson Teo, President of TaFF after signing of strategic partnership between TaFF and RGE to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education
01.12.2021

RGE Gives Sustainable Fashion a Boost

  • RGE has formalised two new partnerships in Singapore to advance sustainable fashion.

The first is a three-year strategic partnership with the Textile & Fashion Federation (TaFF) to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education. The second is a five-year research collaboration with Nanyang Technological University, Singapore (NTU Singapore) on innovation in textile recycling technology.

The partnership with TaFF on its fashion sustainability programme was officially launched today. Through industry talent development and capacity building, raising corporate and consumer awareness, and innovation promotion, TaFF seeks to galvanise the fashion ecosystem towards redefining sustainable fashion.

  • RGE has formalised two new partnerships in Singapore to advance sustainable fashion.

The first is a three-year strategic partnership with the Textile & Fashion Federation (TaFF) to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education. The second is a five-year research collaboration with Nanyang Technological University, Singapore (NTU Singapore) on innovation in textile recycling technology.

The partnership with TaFF on its fashion sustainability programme was officially launched today. Through industry talent development and capacity building, raising corporate and consumer awareness, and innovation promotion, TaFF seeks to galvanise the fashion ecosystem towards redefining sustainable fashion.

Wilson Teo, President of TaFF, said, “Our strategic partnership with RGE marks a step forward for TaFF to expand our sustainability ecosystem throughout the fashion value chain, from materials, manufacturing, brands and technology to solutions. We have set up a Steering Committee that spans across the value chain, as a model for the industry. Together with our collaborators, we will continue to equip enterprises in the journey of sustainability. We will also work with communities to build awareness in responsible consumption and recycling.”

RGE has committed to provide nearly S$3 million funding over three years to support TaFF’s fashion sustainability programme. In addition, RGE’s Vice Chairman Bey Soo Khiang joins the programme’s Steering Committee as its Vice Chairperson.

Tey Wei Lin, President of RGE, said, “As a Singapore-based company and the world’s largest viscose producer, our business is well-positioned to support the country’s desire to advance sustainable development and to create a green economy. Our collaboration with TaFF and NTU is an investment of financial and other resources to create meaningful impact, not just within Singapore but also in the region. As part of our US$200 million investment commitment into next-generation textile fibre innovation and technology, we seek to work with innovators, industry partners, research institutions and academia to scale up solutions that will deliver cleaner and more circular cellulosic textile fibre to the masses at affordable prices.”

The launch of TaFF’s fashion sustainability programme follows the roll-out of the Enterprise Sustainability Programme (ESP) by Enterprise Singapore on 1 October 2021, which supports enterprises in their sustainability initiatives and helps them capture new opportunities in the green economy.

“Industry partnerships are pertinent to uplift capabilities of enterprises. We are very encouraged by TaFF’s efforts to drive sustainability in the textile and fashion sector as trade associations and chambers play a key role in strengthening sector-specific capabilities,” said Alan Yeo, Director of Retail & Design at Enterprise Singapore. “Collaborations with corporate partners such as RGE will also help accelerate this process. This is a good start and we hope to eventually see more companies across all sectors start to integrate sustainability alongside their growth.”

The launch event was graced by Minister of State for Trade and Industry Low Yen Ling, TaFF’s patron and Senior Minister of State for National Development and Foreign Affairs Sim Ann, CEO of Enterprise Singapore Png Cheong Boon, as well senior representatives from TaFF and RGE.

The official launch of the research collaboration with NTU is expected to take place next year. A key desired outcome from the collaboration is to complement RGE’s pilot urban-fit textile recycling plant in Singapore.

(c) Huntsman Corporation
30.11.2021

Huntsman presents High-Performance Solutions and Protection Effects at Performance Days

Huntsman Textile Effects is bringing its complete end-to-end suite of high-performance solutions for sports apparel to Performance Days Digital Fair from December 1 to 2, 2021 virtually.

Driven by growing consumer interest in active and healthy lifestyles, coupled with the growing number of national sports participation programs that promote healthy living, the global sportwear market shows no signs of slowing. Brands that aim to satisfy this high-growth market need to be able to produce performance apparel that not only delivers sought-after functional capabilities and desirable aesthetics, but also comes with low environmental impact.

Huntsman will introduce the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range at Performance Days. AVITERA® ROSE SE delivers bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also significantly outperforms available dyeing technologies for cellulosic fibers and blends in terms of value, reducing recipe costs, minimizing processing costs and eliminating reprocessing.

Huntsman Textile Effects is bringing its complete end-to-end suite of high-performance solutions for sports apparel to Performance Days Digital Fair from December 1 to 2, 2021 virtually.

Driven by growing consumer interest in active and healthy lifestyles, coupled with the growing number of national sports participation programs that promote healthy living, the global sportwear market shows no signs of slowing. Brands that aim to satisfy this high-growth market need to be able to produce performance apparel that not only delivers sought-after functional capabilities and desirable aesthetics, but also comes with low environmental impact.

Huntsman will introduce the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range at Performance Days. AVITERA® ROSE SE delivers bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also significantly outperforms available dyeing technologies for cellulosic fibers and blends in terms of value, reducing recipe costs, minimizing processing costs and eliminating reprocessing.

Also in the spotlight are eco-friendly solutions for the challenges of achieving full whites and consistent shades on recycled polyester (rPET) with right-first-time quality. Huntsman’s rPET processing solutions include pre-treatment chemicals, fluorescent whitening agents, state-of-the-art washfast dyes, and finishing solutions for high-performance protection and comfort.

In partnership with Sciessent, Huntsman is also bringing revolutionary antimicrobial and odor-control solutions to Performance Days. These include Sciessent’s Agion Active® X2, a next-generation odor-control solution that combines advanced technologies to both capture and fight odor-causing bacteria for garments that smell fresh for longer and need less frequent washing. The partners are also previewing a new solution: Sciessent’s NOBO™, a cost-effective odor adsorber that provides odor control on virtually any fabric.

Other featured innovations include Teflon Eco Dry with Zelan™ R2 Plus technology. A breakthrough in sustainable water repellency, it contains 30% renewably sourced plant-based raw materials and meets or exceeds performance levels possible with traditional fluorinated technologies. Another exciting Huntsman solution is the new PHOBOL® Extender UXN – a product that optimizes water-repellent finishes for long-lasting fabric protection. It is free from butanone oxime, which has recently been re-classified in Europe and restricted above certain limits in products by bluesign®.

Source:

Huntsman Corporation

29.11.2021

AVK and SMC BMC Alliance launch SMCCreate 2022 Design Conference

The European Alliance for SMC BMC and the AVK expert task force SMC/BMC are announcing they will organize together SMCCreate 2022, a conference about design in SMC and BMC composite materials. This conference will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

SMC and BMC are composite materials ideal for making light and intricate parts that combine structural performance with a smooth surface finish. For that reason, SMC and BMC are increasingly used in a broad range of end-use applications and markets.

Companies that have been using SMC and BMC solutions have a lot of expertise available, which can help designers to be more successful in bringing products to market. Therefore, the European Alliance for SMC BMC and the AVK expert task force SMC/BMC would like to organize together this design conference, allowing designers to learn from the experts, apply gained insights into their own designs, and broaden their horizon for new part developments.

The European Alliance for SMC BMC and the AVK expert task force SMC/BMC are announcing they will organize together SMCCreate 2022, a conference about design in SMC and BMC composite materials. This conference will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

SMC and BMC are composite materials ideal for making light and intricate parts that combine structural performance with a smooth surface finish. For that reason, SMC and BMC are increasingly used in a broad range of end-use applications and markets.

Companies that have been using SMC and BMC solutions have a lot of expertise available, which can help designers to be more successful in bringing products to market. Therefore, the European Alliance for SMC BMC and the AVK expert task force SMC/BMC would like to organize together this design conference, allowing designers to learn from the experts, apply gained insights into their own designs, and broaden their horizon for new part developments.

Using SMC BMC in your part design
Within the time of only 1.5 day, the SMCCreate 2022 conference will cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability. In particular:

  • How can SMC BMC help you to design great parts, bringing a combination of unique shapes and functional performance?
  • How can SMC BMC help you to improve sustainability?
  • What are the key steps in the design process, starting from initial idea to full production series manufacturing?
  • What are the typical design challenges and solutions?
  • How to best design for optimal manufacturing?
  • Which are the tools available for designing in SMC BMC: design software, material data, tooling considerations?
  • Practical examples of designs and components made in SMC BMC
  • What’s new in the world of SMC BMC?

Date and Location
The SMCCreate 2022 Conference will be organized on April 6-7, 2022 in Antwerp (Belgium).

(c) Huntsman Corporation
29.11.2021

Huntsman’s AVITERA® SE Rose delivers Sustainability and Performance

Huntsman Textile Effects has released the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range with the introduction of AVITERA® ROSE SE for brilliant bluish-red shades. The innovative new dye significantly outperforms the available dyeing technologies for cellulosic fibers and blends, delivering substantial water and energy savings, exceptional overall fastness, and reduced costs.

AVITERA® ROSE SE slashes the water and energy required for production by up to 50% thanks to its unique low-temperature and high-speed wash-off technology. It further delivers excellent right-first-time performance, with outstanding compatibility, levelling properties, and on-tone build-up. The cost-effective formulation reduces recipe costs for medium-dark shades while both minimizing processing costs and eliminating reprocessing. It also increases mill output by up to 25% or more.

Huntsman Textile Effects has released the latest addition to the third generation of its revolutionary AVITERA® SE polyreactive dye range with the introduction of AVITERA® ROSE SE for brilliant bluish-red shades. The innovative new dye significantly outperforms the available dyeing technologies for cellulosic fibers and blends, delivering substantial water and energy savings, exceptional overall fastness, and reduced costs.

AVITERA® ROSE SE slashes the water and energy required for production by up to 50% thanks to its unique low-temperature and high-speed wash-off technology. It further delivers excellent right-first-time performance, with outstanding compatibility, levelling properties, and on-tone build-up. The cost-effective formulation reduces recipe costs for medium-dark shades while both minimizing processing costs and eliminating reprocessing. It also increases mill output by up to 25% or more.

Using AVITERA® ROSE SE, brands can stand out with brilliant bluish-red textile products in a broader shade gamut. The dyes offer very good light fastness levels for classic bluish trichromatic element, with exceptional overall fastness performance. Products dyed with AVITERA® ROSE SE have the highest chlorine resistance, tailormade for stringent Japanese and US laundering requirements, and are suitable for use with Huntsman’s HIGH IQ® Lasting Color Eco color-retention program. With minimal chance of cross-staining, they are ideal for red-white striped cotton knit fabric.

AVITERA® ROSE SE is fully compliant with the most stringent industry and brand-specific restricted substance lists. It is bluesign® approved and is suitable for STANDARD 100 by OEKO-TEX® certified textile products.

Launched by Huntsman Textile Effects in 2010, the first-generation AVITERA® SE dyes set the benchmark for sustainability in the textile industry. The second generation expanded the range’s color palette from the palest to the deepest and darkest shades. The third generation further enhances the economic sustainability of the AVITERA® range while delivering unrivalled environmental benefits, outstanding operational performance, and attractive textiles with exceptional overall fastness.

Indorama Ventures launches the industry's first report on contributions to UN Sustainable Development Goals (c) Indorama Ventures Public Company Limited
SDGs Report Cover
24.11.2021

Indorama Ventures launches the industry's first report on contributions to UN Sustainable Development Goals

Indorama Ventures Public Company Limited (IVL), a world-class sustainable chemical company, introduced the first independent Sustainable Development Goals (SDGs) Report developed by the private sector in Thailand. The report provides details of the company’s sustainability strategy, aligned with the United Nation’s SDGs.

Renaud Meyer, UN Development Programme (UNDP) Resident Representative to Thailand, said, “We support countries in achieving the UN Sustainable Development Goals through integrated solutions. Achieving the goals at global level requires the partnership of governments, private sector, civil society and citizens alike to make sure we leave a better planet for future generations. The Sustainable Development Goals Report developed by the private sector is one way to urge more constructive collaboration among sectors.”  

Indorama Ventures Public Company Limited (IVL), a world-class sustainable chemical company, introduced the first independent Sustainable Development Goals (SDGs) Report developed by the private sector in Thailand. The report provides details of the company’s sustainability strategy, aligned with the United Nation’s SDGs.

Renaud Meyer, UN Development Programme (UNDP) Resident Representative to Thailand, said, “We support countries in achieving the UN Sustainable Development Goals through integrated solutions. Achieving the goals at global level requires the partnership of governments, private sector, civil society and citizens alike to make sure we leave a better planet for future generations. The Sustainable Development Goals Report developed by the private sector is one way to urge more constructive collaboration among sectors.”  

The report presents IVL’s progress in achieving the UN Sustainable Development Goals. The company outlined five focus areas for contributing to the SDGs: Recycling and the Circular Economy, Climate Change and Energy, Environmental Stewardship, Health Safety and Well-being, and CSR and Collaborations. IVL believes it can have the greatest impact on these areas while also growing its business and bringing about constructive change. Activities in these five areas help IVL align with 13 of the 17 SDGs, totaling 39 targets.

Yash Lohia, Chief Sustainability Officer at Indorama Ventures, said, “Businesses can make a significant contribution to achieving the UN Sustainable Development Goals. IVL, as a responsible industry leader, is committed to contributing to the SDGs and addressing the world's environmental and economic concerns. We need to be accountable to our stakeholders, including our 25,000 employees and their families, our customers and industry partners. Furthermore, we believe that complying with the SDGs will provide us with considerable business prospects.

Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester (c) Marchi & Fildi Group
Linea Gleaming
24.11.2021

Italian spinning group launches new metalloplastic yarns

  • Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester

With the goal to expand the offer of yarns coming from recycled raw materials for a textile more attentive to the consumption of resources, the MFT division of the Marchi & Fildi Group completes the range of metalloplastic yarns of its Gleaming collection with the insertion of 100% recycled polyester yarns coming from post-consumer material and with the GRS (Global Recycle Standard) certification.
Starting from recycled polyester with traceable origin, in compliance with environmental and social criteria extended to all the phases of the supply chain, metalloplastic yarns are obtained with the same esthetic features and performance, compared to similar products based on virgin raw materials.

  • Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester

With the goal to expand the offer of yarns coming from recycled raw materials for a textile more attentive to the consumption of resources, the MFT division of the Marchi & Fildi Group completes the range of metalloplastic yarns of its Gleaming collection with the insertion of 100% recycled polyester yarns coming from post-consumer material and with the GRS (Global Recycle Standard) certification.
Starting from recycled polyester with traceable origin, in compliance with environmental and social criteria extended to all the phases of the supply chain, metalloplastic yarns are obtained with the same esthetic features and performance, compared to similar products based on virgin raw materials.

“Thanks to our commitment in the research of materials, we are able to propose metalloplastic yarns produced with 100% recycled material; the film used for the production of flat yarns, too, is in recycled polyester, with a quality level that is suitable for cutting – the Company explains -. Till now it was possible to find in the market only metalloplastic yarns with not recycled polyester flat yarn, twisted with certified fibers. This represents an important step forward to implement a circular economy possibility for this kind of products too”.

The Gleaming yarns GRS certified can be supplied in gold and silver, colors and transparent, in various counts, widths and types; they are suitable for use in flat and circular knitting, weaving, hosiery and as a component in fancy yarns.

The Gleaming line, with a wide selection of yarns in stock service, represents a completion of the offer of the Marchi & Fildi Group. The Gleaming yarns are offered in different thicknesses, widths and types with both metallized and transparent, iridescent, refracting and phosphorescent effects. The collection also includes items with special features of resistance to chemical and dyeing treatments. The Gleaming metalloplastic yarns find application in the world of fashion and furniture, for creative and fancy yarns and fabrics, accessories and decorations. Products with refractive features are also used in technical items like uniforms and workwear, sport garments and accessories, external ribbons and labels.

Source:

Marchi & Fildi Group

ISKO champions circularity and biodiversity at the Circular Fashion Summit 2021 (c) ISKO
Denim by ISKO
24.11.2021

ISKO champions circularity and biodiversity at the Circular Fashion Summit 2021

  • The leading denim ingredient brand joins lablaco’s virtual reality Circular Fashion Summit 2021 as an Innovation Partner

ISKO continues to reaffirm its commitment towards circularity by participating as an Innovation Partner in the Circular Fashion Summit 2021 by lablaco. The summit will bring together leaders of change across design, technology and sustainability to share knowledge and take action towards creating a circular future for fashion. The event will be held in a VR version of the Grand Palais Éphémère in Paris and will take place on 9-12 December.

ISKO’s approach to circularity is built on creating a future where no virgin resources are needed to produce beautiful durable and high performing woven fabrics To achieve this, the leading denim ingredient brand is working to remove its reliance on fossil fuels and virgin materials by employing only renewable energy and by setting the challenging target of using 100% recycled or reused materials.

  • The leading denim ingredient brand joins lablaco’s virtual reality Circular Fashion Summit 2021 as an Innovation Partner

ISKO continues to reaffirm its commitment towards circularity by participating as an Innovation Partner in the Circular Fashion Summit 2021 by lablaco. The summit will bring together leaders of change across design, technology and sustainability to share knowledge and take action towards creating a circular future for fashion. The event will be held in a VR version of the Grand Palais Éphémère in Paris and will take place on 9-12 December.

ISKO’s approach to circularity is built on creating a future where no virgin resources are needed to produce beautiful durable and high performing woven fabrics To achieve this, the leading denim ingredient brand is working to remove its reliance on fossil fuels and virgin materials by employing only renewable energy and by setting the challenging target of using 100% recycled or reused materials.

This impressive goal is possible thanks to the cutting edge technologies ISKO is working with such as a one of a kind process which fully separates and recycles cotton and polyester blends at scale, and collaborative partnerships with MoRe Research that are aimed at discovering new possibilities for cellulose based materials. ISKO’s new generation of R TWO™50+ fabrics are also playing a role in moving towards this goal. E ngineered for nature’ they use a minimum of 50% pre and post consumer recycled blend reducing carbon and water footprints by 45% and 65% respectively, and are all GRS certified ISKO also believes that the transition to a circular economy cannot happen without addressing the impact on biodiversity and our ecology. Tackling the over-sourcing of raw materials is key, as the extraction of new natural resources and the impact on carbon emissions in processing them contributes to more than 90% of biodiversity loss.

Source:

Menabò Group

24.11.2021

PERFORMANCE DAYS cancelled in Munich on December 1-2, 2021

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

The new measures are scheduled to come into effect in Munich from the middle of this week, which would lead to very short-term changes. The organizers of PERFORMANCE DAYS therefore see themselves in the responsibility to enable a minimum of planning security as well as a responsible handling of the given situation with this decision.

“Exceptional situations require exceptional decisions – making these all the more difficult. After experiencing a very successful and surprisingly well-attended fair with the Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon last week, we have tried everything possible up to the last moment and firmly believed that we would finally set a further positive milestone with the physical edition of PERFORMANCE DAYS in Munich. We fulfilled all the requirements, updated our hygiene concept several times to comply with the dynamically changing measures and took all the necessary precautions for a safe event. Unfortunately, current developments do not allow us to host the trade fair event next week, since the undisputed top priority is the protection and health of our visitors. Now our focus turns to the full implementation of the Digital Fair on December 1 and 2, 2021”, explains Marco Weichert, CEO of PERFORMANCE DAYS

Focus on digital platform
The PERFORMANCE DAYS team is now investing all its efforts into implementing the Digital Fair on December 1 and 2, 2021. As part of THE LOOP, those interested have the opportunity as of now to view online the fabric innovations and news for the Winter Season 2023/24, this year’s Focus Topic “Sustainable Nylon” and the latest color trends. In the Marketplace, visitors will be able to view the numerous exhibitor products, including the PERFORMANCE FORUM’s curated sustainable fabric highlights. In order to present the fabrics to visitors as realistically as possible in terms of feel, design and structure in digital form, the PERFORMANCE FORUM has been equipped with new 3D-technology, including innovative tools such as 3D images, video animations and downloadable U3M files. Throughout the Digital Fair, exhibitors and fair visitors can look forward to extensive networking opportunities. For example, as part of the extensive digital supporting program on December 1, with various expert talks, discussion rounds and speakers via livestream, moderated by Charles Ross live from the studio. On December 2, the “sustain & innovate” conference on this year’s Focus Topic “The Sustainable Future of Nylon” will kick off with discussions and panels, moderated by Astrid Schlüchter, Editor-in-Chief of SAZsport and SPORTSFASHION by saz.  

A very special thank you goes out to the entire PERFORMANCE DAYS community with its exhibitors, visitors and partners for their active support, trust, loyalty and understanding in these still extraordinary times. The team looks forward to the Digital Fair on December 1 and 2, 2021 and further ahead to meeting you all personally on April 27 and 28, 2022 at the summer edition of PERFORMANCE DAYS live in Munich.

Source:

Performance Days

22.11.2021

Sappi invests in Kirkniemi Mill on decarbonisation journey

Sappi has approved an investment in Kirkniemi Mill in Lohja, Finland which enables a switch in its energy sourcing to renewable bioenergy. With this investment the mill’s direct fossil greenhouse gas emissions will reduce by ca. 90 percent, which is equivalent to 230 000 tons of carbon dioxide annually.

The project, set for completion in early 2023, will contribute significantly to Sappi Europe’s decarbonisation roadmap by exiting coal at one of its last facilities partially using this fuel type. Biomass will then be used in Kirkniemi’s multi-fuel boiler, built in 2015. The move advances Sappi towards its 2025 targets which include reducing specific greenhouse gas emissions (scope 1 and 2) by 25 percent and increasing renewable energy share to 50 percent in Europe compared to 2019.

The investment will establish the equipment needed to receive, store and handle woody biomass like the bark, sawdust and wood chips used for biofuel production. Such biomass types are by-products from the forest-based industry and utilising them for energy production derives further value from the forest resource.

Sappi has approved an investment in Kirkniemi Mill in Lohja, Finland which enables a switch in its energy sourcing to renewable bioenergy. With this investment the mill’s direct fossil greenhouse gas emissions will reduce by ca. 90 percent, which is equivalent to 230 000 tons of carbon dioxide annually.

The project, set for completion in early 2023, will contribute significantly to Sappi Europe’s decarbonisation roadmap by exiting coal at one of its last facilities partially using this fuel type. Biomass will then be used in Kirkniemi’s multi-fuel boiler, built in 2015. The move advances Sappi towards its 2025 targets which include reducing specific greenhouse gas emissions (scope 1 and 2) by 25 percent and increasing renewable energy share to 50 percent in Europe compared to 2019.

The investment will establish the equipment needed to receive, store and handle woody biomass like the bark, sawdust and wood chips used for biofuel production. Such biomass types are by-products from the forest-based industry and utilising them for energy production derives further value from the forest resource.

In addition to increasing share of renewable energy, Sappi’s mills are also focused on reducing energy consumption. Sappi Kirkniemi Mill is party to Finland’s National Energy Efficiency Agreement and consistently reaches their energy saving targets. Kirkniemi’s ISO 50001 certification provides further evidence of the mill’s systematic improvement in energy efficiency.

Source:

Sappi Europe

22.11.2021

ECOSENSOR™ by Asahi Kasei Advance launches its FW 22/23 fabric collection

For its FW 22/23 collection, ECOSENSOR™ by Asahi Kasei Advance presents a high-tech fabric collection, which implements a new generation of values, with the aim of keeping nature, body and mind in harmony.

ECOSENSOR™’s new references meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Furthermore, they are made with certified ingredients, through a completely traceable and transparent production process and supply chain. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™’ stands out as a unique eco-high-tech performance proposition in its market.

The whole collection is focused on advanced technology and environmental responsibility. Thanks to ECOSENSOR™ by Asahi Kasei Advance’s unique value-chain based on recycling technology, most part of its yarns are certified by the renowned GRS (Global Recycled Standard). Even the dyeing and finishing phases - key moments for  performance wear - have been certified by international labels such as bluesign® and OEKO-TEX® Standard 100.

For its FW 22/23 collection, ECOSENSOR™ by Asahi Kasei Advance presents a high-tech fabric collection, which implements a new generation of values, with the aim of keeping nature, body and mind in harmony.

ECOSENSOR™’s new references meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Furthermore, they are made with certified ingredients, through a completely traceable and transparent production process and supply chain. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™’ stands out as a unique eco-high-tech performance proposition in its market.

The whole collection is focused on advanced technology and environmental responsibility. Thanks to ECOSENSOR™ by Asahi Kasei Advance’s unique value-chain based on recycling technology, most part of its yarns are certified by the renowned GRS (Global Recycled Standard). Even the dyeing and finishing phases - key moments for  performance wear - have been certified by international labels such as bluesign® and OEKO-TEX® Standard 100.

Among the compositions of the fabrics, dominant are the recycled polyamide (58%) and polyester (39%) yarns. The stretch component present in 22 articles of the collection is based on ROICA™ EF by Asahi Kasei - the sustainable recycled stretch yarn made from pre-consumer waste. In addition, 8 fabrics of the FW22/23 collection are made of Bemberg™ by Asahi Kasei - the high-tech yarn born from the transformation of cotton linters through a fully circular, transparent and traceable process with an amazing precious hand, optimal moisture management characteristics,  whose end of life guarantees its biodegradability and it also carries GRS certification.

Featuring a total of 36 fabrics, the collection is composed of:

  • 7 outerwear fabric
  • 22 sportswear fabrics
  • 7 innerwear fabrics
Source:

GB Network

19.11.2021

GOTS appoints Protection Officer North America

Travis Wells, JD, MBA, has been appointed as GOTS Protection Officer North America. In this newly created position, he will be identifying and advising companies that are making unsubstantiated claims regarding GOTS signage.

An increasing number of companies are eager to use GOTS certified materials and want to make claims regarding GOTS content on their finished products. However, the correct use of the trademarked logo is strictly regulated in CUGS 3.1. – The conditions for the use of GOTS signs. A GOTS claim on finished products guarantees the consumer that every single step in the textile processing supply chain was certified. As soon as one stage in the supply chain is not certified, a company may not label or mention GOTS on their final product.

Travis Wells, JD, MBA, has been appointed as GOTS Protection Officer North America. In this newly created position, he will be identifying and advising companies that are making unsubstantiated claims regarding GOTS signage.

An increasing number of companies are eager to use GOTS certified materials and want to make claims regarding GOTS content on their finished products. However, the correct use of the trademarked logo is strictly regulated in CUGS 3.1. – The conditions for the use of GOTS signs. A GOTS claim on finished products guarantees the consumer that every single step in the textile processing supply chain was certified. As soon as one stage in the supply chain is not certified, a company may not label or mention GOTS on their final product.

As a Sustainable Supply Chain Director, Travis has more than 20 years of experience advising fashion and apparel-related businesses on sustainable sourcing, product development and manufacturing in domestic and global markets. He earned his Bachelor of Arts (B.A.) in International Studies from Vassar College, his Juris Doctorate (J.D.) in Corporate Law from George Washington University Law School and his Master of Business Administration (MBA) in Global Sustainability and Finance from the Gabelli School of Business at Fordham University.  

(c) Indorama Ventures
18.11.2021

Indorama Ventures included in the Dow Jones Sustainability Indices (DJSI)

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, announced its inclusion in the Dow Jones Sustainability World Index (DJSI World) and the Dow Jones Sustainability Emerging Markets Index (DJSI Emerging Markets) for the third and fifth consecutive year respectively. The successive years of DJSI inclusion reflect IVL’s strong commitment to sustainability with globally recognized industry best-in-class practices.

This year, 139 chemical companies were selected from more than 11,000 companies from 61 industries and about 5,300 companies eligible for S&P Global ESG indices. IVL ranked in the 97th percentile with full scores in the areas of environmental and social compliance, enabling policies through industry associations, human rights protections in the workplace and value chain, and sustainable water management including forecasting potential water related risks in operations.

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, announced its inclusion in the Dow Jones Sustainability World Index (DJSI World) and the Dow Jones Sustainability Emerging Markets Index (DJSI Emerging Markets) for the third and fifth consecutive year respectively. The successive years of DJSI inclusion reflect IVL’s strong commitment to sustainability with globally recognized industry best-in-class practices.

This year, 139 chemical companies were selected from more than 11,000 companies from 61 industries and about 5,300 companies eligible for S&P Global ESG indices. IVL ranked in the 97th percentile with full scores in the areas of environmental and social compliance, enabling policies through industry associations, human rights protections in the workplace and value chain, and sustainable water management including forecasting potential water related risks in operations.

Yash Lohia, Chief Sustainability Officer at Indorama Ventures, said, "As a global leader, this is an important milestone in our operations as we transform the chemical industry. Our inclusion in the DJSI for the fifth year running is a tribute to how IVL’s operations are contributing to a more sustainable future. Our strategy includes focusing on climate action, aligning with the world's net zero ambitions, strengthening the circular economy and PET recycling with our ambitious targets, and enhancing shared value with our stakeholders.”

The Dow Jones Sustainability Indices (DJSI) are a global benchmark for sustainability-driven companies, evaluating material governance & economic, environmental and social factors.

Source:

Indorama Ventures Public Company Limited

17.11.2021

C.L.A.S.S. welcomes Sensil® BioCare by NILIT into its material hub

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

Sensil® BioCare sustainable premium Nylon fiber is enhanced with a technology, that helps lessen the persistence of textile waste in sea water and in landfills. With its embedded technology, if any microfibers of Sensil® BioCare garments are released during washing, they will be broken down at a quicker rate compared to conventional Nylon 6.6 fibers when they end up in the oceans. Tests were conducted in both landfill soil and sea water simulations to understand the potential impact of Sensil® BioCare on both ecosystems. Specifically, initial testing following the ASTM D6691 Standard Test Method For Determining Aerobic Biodegradation Of Plastic Materials In The Marine Environment and the ASTM D5511 Standard Test Method For Determining Anaerobic Biodegradation Of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions indicates that Sensil® BioCare yarns break down more rapidly (with a biodegradation of about 40% in 500 days) than conventional nylon. These promising findings point to reduced waste accumulation in both oceans and landfills.

NILIT, owner of the sustainable brand SENSIL®, has also teamed up with The Ocean Foundation’s Blue Resilience Initiative to reestablish and safeguard essential ocean meadows and other coastal habitats. These marine grasslands, which are being damaged at a rate of two football fields every hour, are vital ecosystems for sequestering CO2 from the atmosphere, thus reducing global warming and ocean acidification. In addition, ocean grasslands sustain sea life, defend coast lines against erosion and storm surge, and support economies around the world.

NILIT’s plant in Israel, who produce Sensil ® Biocare boosts, renowned certifications such as GRS (Global Recycled Standard)*, ISO 9001**, ISO 14001*** and ISO 45001****. Moreover, the company has already announced that all other plants in  the USA, China and Brazil will be ISO 14001 certified within 2021 and ISO 45001 certified within 2025. Worth to mention, 40% of Nilit’s team is made up of women.

Source:

C.L.A.S.S.

16.11.2021

RGE: Second Annual Update on Textile Fibre Innovation and Technology

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Amid the COVID-19 pandemic continuing to restrict travel and collaboration, RGE persisted in building upon existing partnerships, while entering into new agreements. Sateri strengthened its strategic collaboration with Infinited Fiber Company, participating in the company’s EUR30 million funding round, which attracted new and existing investors such as H&M Group, Adidas, BESTSELLER and Zalando.

New partnerships formed by RGE included a five-year textile recycling research collaboration with Nanyang Technological University Singapore, and a three-year strategic partnership with the Textile and Fashion Federation Singapore which seeks, among others goals, to advance research and innovation in circular economy approaches to fashion waste in Asia.

RGE’s in-house R&D team has made good progress in advancing its textile-to-textile project, focusing on producing quality viscose using recycled cotton textiles as feedstock. To support plans to build a textile recycling facility in Indonesia, and as part of commercial feasibility analysis, studies examining the availability of textile waste and textile recycling landscapes in China, Indonesia, Sri Lanka and Bangladesh were completed.

Sateri remains on track in developing a product with 50 per cent recycled content by 2023, and to reach 100 per cent by 2030. It also aims for 20 per cent of its feedstock to contain alternative or recycled materials by 2025. In this similar vein, APR will source 20 per cent of its feedstock from alternative or recycled materials by 2030.

Source:

RGE / Omnicom Public Relations Group

16.11.2021

Gina Tricot and We aRe SpinDye in a resource-efficient collaboration

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

One of Gina Tricot's focus is to explore new methods and technologies in sustainability, which makes the collaboration with We aRe Spin Dye feel just right for us. Together we get a product with more durable and circular fibers, in addition with a more sustainable textile production with a focus on minimal water use. We are extremely proud of this collaboration. says Emma Garrote, Global Production & Sustainability Manager at Gina Tricot.

Gina Tricot is a shining example of an agile organization with short decision-making processes. They have managed to enthuse both the design and production department. It has been crucial to reach the launch of this collection that takes place today, says Andreas Andrén, CEO of We aRe SpinDye®.

Gina Tricot
Gina Tricot is a Swedish fashion brand that offers fashion to women in over 30 countries. Today, Gina Tricot has over 160 stores around Sweden, Norway, Denmark and Finland, as well as e-commerce throughout Europe. With around 1,900 employees, 98% of these are girls. For Gina Tricot, it is important to build pride from the inside out, we are a company that chooses to invest in and highlight women.

We aRe Spin Dye
The company is a Swedish cleantech company that provides and offers a process and platform for production and quality control that enables players in the fashion and clothing industry to significantly reduce their environmental impact. The company's business concept is to establish a new, sustainable and transparent standard for dyeing synthetic textiles in the fashion and apparel industry in a simple and user-friendly way.

More information:
We are SpinDye We aRe Spin Dye
Source:

We aRe SpinDye

15.11.2021

Kelheim Fibres once again finishes high in Canopy's Hot Button Ranking

In the Canopy’s 2021 Hot Button Ranking, Kelheim Fibres once again occupies a leading position: With a increase of 2.5 points in the evaluation, the Bavarian viscose speciality fibre manufacturer tied for third place out of around 40 viscose fibre manufacturers worldwide and a dark green/green shirt for the second year running. The Hot Button Report not only stands for responsible raw material sourcing - it is an overall sustainability indicator for viscose fibre producers.

Especially in the areas of transparency and procurement, the NGO Canopy, which is committed to the preservation of ancient and endangered forests, awarded Kelheim Fibres top points: Kelheim Fibres is the only EMAS-certified viscose fibre manufacturer worldwide and publishes all environmentally relevant data publicly.

Kelheim Fibres also gained points in the area of "Next Generation Solutions" - the use of alternative raw materials in fibre production. Together with the Swedish textile recycling company Renewcell, the fibre experts are planning to realise the large-scale production of high-quality viscose fibres from up to 10,000 tonnes of the 100% textile recyclate Circulose® per year.

In the Canopy’s 2021 Hot Button Ranking, Kelheim Fibres once again occupies a leading position: With a increase of 2.5 points in the evaluation, the Bavarian viscose speciality fibre manufacturer tied for third place out of around 40 viscose fibre manufacturers worldwide and a dark green/green shirt for the second year running. The Hot Button Report not only stands for responsible raw material sourcing - it is an overall sustainability indicator for viscose fibre producers.

Especially in the areas of transparency and procurement, the NGO Canopy, which is committed to the preservation of ancient and endangered forests, awarded Kelheim Fibres top points: Kelheim Fibres is the only EMAS-certified viscose fibre manufacturer worldwide and publishes all environmentally relevant data publicly.

Kelheim Fibres also gained points in the area of "Next Generation Solutions" - the use of alternative raw materials in fibre production. Together with the Swedish textile recycling company Renewcell, the fibre experts are planning to realise the large-scale production of high-quality viscose fibres from up to 10,000 tonnes of the 100% textile recyclate Circulose® per year.

Source:

Kelheim Fibres GmbH

15.11.2021

Autoneum: Flexi-Loft with high acoustic performance

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

In order to achieve high acoustic performance at minimum weight and maximum sustainability, Autoneum is continuously advancing its textile product portfolio. When it comes to components for the vehicle interior, for example, standard thermoplastic felts excel through their acoustic absorption, robustness and environmental friendliness. However, since felt-based materials are generally less voluminous and moldable as foam components, they require more weight to thoroughly fill the areas of varying thickness between the surface of the component and the vehicle’s body-in-white. In contrast, Autoneum’s Flexi-Loft technology is significantly lighter, more flexible and more adaptable than standard felts. In addition, the fiber-based material is versatile and clearly outperforms current foam products in terms of sustainability.

Thanks to its blend of recycled cotton and polyester fibers, Flexi-Loft substantially reduces component weight while improving geometrical adaptability and acoustic performance, especially in areas of low thickness. Thanks to the specific properties of the fibers, Flexi-Loft enables a precise adaptation to a wide variety of vehicle bodies, thereby improving the noise-insulating qualities of the respective product. Even at low weight, Flexi-Loft covers a wide range of material thicknesses, thus proving to be an ideal decoupling material for interior components with complex shapes such as inner dashes and automotive carpets. As a lightweight, flexible and sustainable alternative to both standard felts and foam, Flexi-Loft distinguishes itself by its versatile application in combination with existing Autoneum technologies such as Hybrid-Acoustics and Prime-Light. Moreover, the material helps to reduce odor and dust inside the vehicle.

Flexi-Loft consists of at least 50% recycled cotton fibers, and cut-offs generated during the manufacturing process are reclaimed, processed and then reused in the production of new felt blanks.

Autoneum is already using Flexi-Loft worldwide as an insulator for various carpets, inner dashes and other acoustic components based on its Prime-Light technology. The application of the material as an effective decoupler in inner dashes made of Hybrid-Acoustics will be launched on the European market in 2023.

More information:
Autoneum Automotive acoustic
Source:

Autoneum Management AG

(c) Abu Dhabi Government Media Office
15.11.2021

Partnership between ADNOC and Borealis to expand Borouge Facility

  • ADNOC and Borealis confirm final investment agreement to build Borouge 4 in Ruwais, United Arab Emirates (UAE), which will produce 1.4 million tons of polyethylene per annum
  • Expansion project includes construction of a 1.5 million tonnes ethane cracker, two state-of-the-art Borstar® polyethylene plants and a cross-linked polyethylene plant
  • Borouge 4 will meet growing customer demand across the Middle East, Africa and Asia with differentiated polyolefin solutions in energy, infrastructure, and advanced packaging
  • New facility will benefit from industry-leading technologies to significantly improve energy efficiency and lower emissions, with carbon capture study underway
  • Upon expansion, Borouge will be the world's largest single-site polyolefin complex and will supply feedstock to TA'ZIZ Industrial Chemicals Zone Body

ADNOC and Borealis AG signed an USD 6.2 billion investment agreement to build the fourth Borouge facility – Borouge 4 – at the polyolefin manufacturing complex in Ruwais, United Arab Emirates (UAE).

  • ADNOC and Borealis confirm final investment agreement to build Borouge 4 in Ruwais, United Arab Emirates (UAE), which will produce 1.4 million tons of polyethylene per annum
  • Expansion project includes construction of a 1.5 million tonnes ethane cracker, two state-of-the-art Borstar® polyethylene plants and a cross-linked polyethylene plant
  • Borouge 4 will meet growing customer demand across the Middle East, Africa and Asia with differentiated polyolefin solutions in energy, infrastructure, and advanced packaging
  • New facility will benefit from industry-leading technologies to significantly improve energy efficiency and lower emissions, with carbon capture study underway
  • Upon expansion, Borouge will be the world's largest single-site polyolefin complex and will supply feedstock to TA'ZIZ Industrial Chemicals Zone Body

ADNOC and Borealis AG signed an USD 6.2 billion investment agreement to build the fourth Borouge facility – Borouge 4 – at the polyolefin manufacturing complex in Ruwais, United Arab Emirates (UAE).

The world-scale expansion confirms both partners’ commitment to the growth of Borouge and to support chemical production, and advanced manufacturing and industry in Ruwais, a key pillar of Abu Dhabi and the UAE’s technology, innovation and industrial development strategy. Borouge produces crucial industrial raw materials, which are exported to customers globally and used by local companies, boosting local industrial supply chains and enhancing In-Country Value.

Borouge 4 will capitalize on the projected growth in customer demand for polyolefins, driven by their use in manufactured products in the Middle East, Africa and Asia. The facility will also enable the next phase of growth at the Ruwais Industrial Complex by supplying feedstock to the TA’ZIZ Industrial Chemicals Zone.

Borouge 4 will have an industry-leading focus on sustainability leveraging the capabilities of both shareholders. The facility will utilize Borealis’ proprietary Borstar technology, to produce a product portfolio focused on durable applications for energy, infrastructure, advanced packaging, and agriculture sectors. This unique technology, in combination with hexene co-monomer, will enable the production of advanced packaging grades with up to 50% recycled polyethylene content.

Subject to an in-depth study, a Carbon Capture unit that would reduce CO2 emissions by 80% could also be operational in time for Borouge 4’s start-up. The facility is also designed to capitalize on ADNOC’s recent initiatives on clean energy, decarbonizing its power supply through access to Abu Dhabi’s clean power sources. These initiatives are aligned with the UAE Net Zero by 2050 Strategic Initiative.

The first Borouge facility, producing 450,000 tons of polyethylene per annum was commissioned in 2001. Borouge 2 and Borouge 3 took capacity to 2 million tons and 4.5 million tons of polyethylene and polypropylene per annum in 2010 and 2014 respectively.  Borouge 4 will boost the company’s annual polyolefin production to 6.4 million tons, making Borouge one of the world’s largest single-site polyolefin facilities.

The new Borouge 4 facility will comprise:

  • An ethane cracker, with 1.5 million tons ethylene output per annum, which will be the fourth cracker in Borouge’s integrated petrochemical complex in Ruwais
  • Two additional Borstar® polyethylene (PE) plants, each with 700 thousand tons per annum capacity, using state-of-the-art Borealis Borstar third generation (3G) technology
  • A cross-linked PE (XLPE) plant of 100 thousand tons per annum capacity.
  • A hexene-1 unit, which will produce co-monomers for certain grades of polyethylene.
Source:

Borealis

12.11.2021

Stahl to set Scope 3 carbon emission targets by mid 2022

Stahl, an active proponent of responsible chemistry, today announces that – by the end of Q2 2022 – it will extend its GHG reduction targets to cover Scope 3 emissions. This step underlines Stahl’s commitment to aligning its strategy with the 2015 Paris Climate Agreement goals, updated at the recent COP26 in Glasgow.

Between 2015 and 2020 Stahl reduced its Scope 1 and 2 (direct) GHG emissions by 37%, and has committed to a further 2% reduction each year to 2030. Scope 3 emissions cover all the indirect emissions that can occur in a company’s value chain, including raw material acquisition, transportation, and the end-of-life impact of its products. By focusing on Scope 3 emissions, Stahl is committing to de-fossilizing its supply chain and ensuring further accountability for its total environmental impact.

Stahl, an active proponent of responsible chemistry, today announces that – by the end of Q2 2022 – it will extend its GHG reduction targets to cover Scope 3 emissions. This step underlines Stahl’s commitment to aligning its strategy with the 2015 Paris Climate Agreement goals, updated at the recent COP26 in Glasgow.

Between 2015 and 2020 Stahl reduced its Scope 1 and 2 (direct) GHG emissions by 37%, and has committed to a further 2% reduction each year to 2030. Scope 3 emissions cover all the indirect emissions that can occur in a company’s value chain, including raw material acquisition, transportation, and the end-of-life impact of its products. By focusing on Scope 3 emissions, Stahl is committing to de-fossilizing its supply chain and ensuring further accountability for its total environmental impact.

Michael Costello, Stahl Group ESG Director: “Only by focusing on reducing Scope 3 emissions can we accurately align our de-fossilization strategy with the global goal of limiting global average temperature increase to 1.5°C, as agreed at the 2015 Paris Climate Agreement and the COP26 in Glasgow. We look forward to working with partners across our industry and value chain to make this happen.”

More information:
Stahl Stahl Group
Source:

Stahl Holdings B.V.