From the Sector

Eltex of Sweden, a pioneer in the adoption of electronic sensors by the weaving machinery industry, is marking its 60th anniversary this month.

The electronic detection of broken or missing weft yarns during production was the problem Eltex founders Åke Rydborn and Ragnar Henriksson set out to solve with the development of the world’s first electronic weft-stop-motion. Its potential was recognised on its introduction at the 1963 ITMA exhibition in Hannover, Germany, leading to the foundation of the company in a modest 12-square-metre workshop in Älmhult, Sweden, in February 1964.

By 1968 the company was operating from a modern 3,000-square-metre plant and beginning to establish a global presence, introducing the first all-in-one printed circuit board (PCB) for its sensor systems in 1971. As exports increased, further Eltex operations were established in the USA and Ireland and the company expanded its product range including energy control devices, temperature and humidity loggers, food handling safety systems, and military grade battery chargers. Further textile milestones in parallel to advances in weaving technology included optical arrival detectors for air-jet weaving machines at the beginning of the 1980s, and the QTV system for warp preparation, which introduced digital stop-motion control to the industry at the start of the 1990s. In 2009, the company branched out into carpet tufting, first with the CoTS clamp-on tube sensor for tufting machines, followed by the Compact sensor for tufting machines in 2013. In 2019 the Compact II further cemented the company’s position in this sector.

Newly developed Eltex EyETM and ACT-R
Most recently, Eltex has launched the Eltex EyETM system for the monitoring of yarn tension on warp beams. Not only does it eliminate problems when warping, but also in the subsequent weaving or tufting processes. Eltex EyETM monitors the yarn tension on all positions in real-time and a minimum and maximum allowable tension value can be set. If any yarn’s tension falls outside these values the operator can be warned or the machine stopped.

The Eltex ACT and ACT-R units meanwhile go beyond yarn tension monitoring to actually control yarn tension. This extends the application range greatly. The plug and play system automatically compensates for any differences in yarn tension that arise, for example from irregularities in yarn packages.

Eltex has been owned by Brian Hicks, Seamus O’Dwyer and Jonathan Bell since 2007, following a management buy-out and the subsequent formation of Eltex Global Holdings in Ireland. Today, its head office, Eltex of Sweden AB, is in Osby, Sweden where it provides research and development, administration and global sales for the group. Eltex Manufacturing in Ireland is now the group’s primary production facility and Eltex US, Inc. provides sales and service for North America.

• Lenzing and Södra – a long-standing partnership for systemic change
• International Textile Manufacturers Federation (ITMF) honored the two companies in the "International Cooperation" category
• EU co-funded recycling project for textiles on an industrial scale

The Lenzing Group, the world’s leading supplier of specialty fibers for the textile and nonwovens industries, and the Swedish pulp producer Södra have received the ITMF Award 2023 in the category “International Cooperation” for their joint achievements in textile recycling and circular economy. The award was presented at the ITMF Annual Conference in Keqiao, China, on November 06, 2023.

The ITMF Award 2023 is given by the International Textile Manufacturers Federation (ITMF) to recognize outstanding achievements and merits in the textile sector in two categories: ”Sustainability & Innovation“ and ”International Cooperation“. Since 2021, the two pioneers have been joining forces in textile recycling, making a decisive contribution to promoting the circular economy in the fashion industry. As part of the cooperation, the companies intend to share their knowledge with each other and jointly develop processes to enable the wider use of cellulose-based used textiles on a commercial scale.

The OnceMore® pulp from Södra, which was jointly developed further by Södra and Lenzing, is subsequently used, among other things, as a raw material for the production of Lenzing fibers with REFIBRA™ technology. The OnceMore® process makes it possible to process and recycle a blend of cotton and polyester.

ITMF paid particular tribute to the joint LIFE TREATS project (Textile Recycling in Europe AT Scale)¹,which was supported by an EU grant of EUR 10m under the LIFE 2022² program and aims to build a large-scale plant at Södra's Mörrum site in Sweden.

For more information on the ITMF Awards 2023, visit the ITMF website.

¹ Project 101113614 — LIFE22-ENV-SE-TREATS
² https://cinea.ec.europa.eu/programmes/life_en

PrimaLoft Inc., a leader in advanced material technology, announced the reorganization of its European sales management team. Effective June 1st, Leonardo Loro has promoted to the position of Sales Leader, Europe. Additionally, the company welcomes Mario Vlietinck as the new Territory Manager for France, Benelux & Denmark.

To further streamline operations and maximize opportunities, PrimaLoft is also implementing a territory reorganization to better align existing sales talent with market opportunities. These moves will strengthen the company’s sales strategy in the region.

Leonardo Loro will lead the European sales team and report directly to Chris Humphris, SVP, Global Sales. "With over a decade of experience as the sales and marketing manager for the southern European market, including France, Italy, Spain, and Portugal, Leonardo has demonstrated exceptional skills in building customer relationships and identifying new business opportunities. His invaluable contributions to our sales efforts make him the ideal candidate to lead and elevate our business in Europe", said Humphris. In his new leadership role, Loro will continue to manage brands in Italy and Spain, as well as military sales efforts in Europe.

Mario Vlietinck joins the PrimaLoft team and will be responsible for managing and developing business relationships with PrimaLoft brand partners in France, Benelux & Denmark. Vlietinck brings a wealth of knowledge in sales and the outdoor industry, previously serving as the head of Apparel & Footwear for Katoen Natie, as well as working for brands such as Reebok, Merrell, and Vannese. "Mario’s background in product development, business development, and international sales positions him as a great asset to our company goals,” said Humphris. Vlietinck will report to Leonardo Loro.

Sales Territory Reorganization
Wim Neels, VP of business development for fashion and lifestyle, will be responsible for all Fashion & Lifestyle brands across Europe, with the exception of Italy & Spain, which remain the responsibility of Leonardo Loro.

Bartosz Lassak will expand his territory responsibility to include outdoor performance brands in the United Kingdom, in addition to Eastern Europe and Turkey. He will also handle any opportunities from North Africa, as well as any brands located outside of other European coverage.

Valerie Raths Goesel will oversee the management of all outdoor performance brands in the Germany, Austria, and Switzerland region.

Mats Jengard will remain the territory manager for Scandinavia (Norway, Sweden, Finland & Iceland), focusing outdoor performance brands.

The acquisition of the automotive business of Borgers, announced in January 2023, has been completed with effect from April 1, 2023, following receipt of all antitrust approvals. As a result, Autoneum now operates 67 production facilities worldwide and employs around 16 100 people in 24 countries. With the acquisition of the long-established German company, Autoneum is further expanding its global market leadership in sustainable acoustic and thermal management of vehicles. For the planned capital increase of around CHF 100 million for the long-term financing of the acquisition, the shareholders approved the creation of a capital band.

The purchase agreement signed on January 6, 2023, to acquire the assets of the insolvent Borgers companies by Autoneum could be completed. As a result, Autoneum will take over the assets of the Borgers companies in Germany and the shares in the subsidiaries in France, Poland, Sweden, Spain, the Czech Republic, the United Kingdom and the USA as well as in the company in Shanghai, China, with effect from April 1, 2023. As already communicated, the enterprise value paid amounts to EUR 117 million.

The product and customer range of Borgers Automotive, the specialist for textile acoustics protection, insulation and trim for vehicles, ideally complements Autoneum’s sustainable product portfolio. Particularly with the wheel arch liner and trunk lining product lines as well as the truck business, Autoneum’s global presence offers further potential for profitable growth also outside Europe. In addition, Borgers has more than 150 years of experience in recycling textile materials. In the 2022 financial year, the Borgers Group – excluding the mechanical engineering division which was already sold in the summer of 2022 – generated expected annual revenue of around EUR 700 million and employed around 4 500 employees worldwide. Autoneum has agreed new pricing and delivery terms with Borgers’ customers, which will ensure both sustainable profitability and the further development of technologies and processes.

From April 1, the former Borgers sites in Germany will be part of Autoneum Germany GmbH, which has been in existence for many years. The other subsidiaries worldwide will gradually be renamed Autoneum.

• Harmful PFAS chemicals, used in thousands of consumer products, are shaping up to be the big environmental and health threat of our time. The EU is now the first in the world to propose a broad ban on these chemicals.
• Consumer brands worth more than €130 billion support the ban on PFAS.  
• Investors with assets in PFAS-producing companies are calling for an end to production.

Many companies are taking a stand against PFAS chemicals as the EU invites the public to give its opinions on the proposed ban on these harmful chemicals.

108 companies dedicated to phasing out PFAS chemicals from products and processes have joined the PFAS Movement, an advocacy campaign initiated by environmental NGO ChemSec that calls for comprehensive regulation of PFAS in the EU. The members comprise many well-known brands, such as Inditex, Urbanears and the Cookware Company, representing various industries— fashion, home goods, food, and personal care. The members are worth more than €130 billion in total revenue.

“A European ban on PFAS chemicals will have huge repercussions for all manufacturing industries and require much work for companies in the global supply chain. However, some parts of the industry oppose this ban, claiming that the change is too big to be justified. That’s why the support for a ban from such influential consumer brands as those in the PFAS Movement is so important. It’s a strong sign that businesses want to eliminate PFAS chemicals in products and processes”, says Anne-Sofie Bäckar, Executive Director at ChemSec.

A Hollywood Helping Hand
ChemSec’s PFAS Movement is not only supported by the brands but also by Hollywood actor Mark Ruffalo who became a PFAS activist after his involvement in the film Dark Waters. The film depicts the real-life events following the massive uncovering of PFAS contamination in the USA. As a result, several PFAS producers in the USA are now involved in multimillion-dollar lawsuits.

The health and environmental threats of PFAS, along with all the lawsuits, have also created attention among another influential group: institutional investors. Last year, 47 institutional investors with US$8 trillion in assets sent a letter to 54 chemical companies named by ChemSec, calling for them to halt the production of persistent “forever chemicals”.

The EU ban on PFAS
The proposed EU ban on PFAS is extensive and the first of its kind worldwide. The idea was initially initiated by Sweden, Denmark, the Netherlands, Germany and Norway, who have spent almost three years mapping the implications of a ban on PFAS chemicals in a dossier that expands over nearly 2000 pages. The proposal shows, among other things, that the emissions of PFAS were 75 000 tonnes in 2020. If this continues, the emissions are expected to sit at 4.4 million tonnes in 30 years. The emissions originate from the production and use of the many products that contain PFAS; furniture, cosmetics, electronics and many more.

Sustainable solutions provider Perstorp has added new corporate sustainability targets, for water and waste, to its sustainability strategy. Its long-term sustainability ambition is to become Finite Material Neutral, which involves water and waste, along with raw materials, energy and catalysts. In 2021 the company set its first 2030 targets, for greenhouse gas emissions (using approved science-based targets) and (eco) toxic impact. Now Perstorp has added new sustainability targets that will address its long-term ambition.

These new 2030 corporate targets (all measured using 2019 as the base year) are:

• 30% absolute reduction of freshwater consumption
• 30% absolute reduction of hazardous waste directed to disposal
• 30% absolute reduction of non-hazardous waste directed to disposal

"Fresh water consumption and waste are two areas of big importance in reducing our environmental impact and working toward increased circularity," says Anna Berggren, Vice President Sustainability at Perstorp Group. "Fresh water scarcity is already a fact around the world, and we have a responsibility to reduce our consumption and utilize alternative water sources. We must also minimize waste generation and find new circular solutions of reusing and recycling the waste streams into new products, either ourselves or so that a third party can use them as raw material. We have set ambitious and absolute sustainability targets, that are to be achieved regardless of production growth. To be able to reach these targets we have several large projects planned that will contribute significantly."

All Perstorp production plants use water for multiple purposes, including, for example: for cooling, as a solvent for chemical reactions, as a carrier for products, and as a heat-transfer medium. One way to reduce fresh water consumption is to purify and recycle wastewater. Perstorp sees this as an important core technology and is planning to invest in wastewater recycling projects at several of its production sites.

A key to reducing waste directed to disposal is to develop circular solutions that use waste streams as raw materials for new products. One example is Project Air, in which captured carbon dioxide together with residue streams from Perstorp's production plant in Stenungsund, Sweden, will serve as raw material for production of sustainable methanol that will replace all the virgin fossil methanol used by Perstorp in Europe.

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

Here are the six nominees
Vybrana – The new generation banana fibre – GenCrest Bioproducts (India)
Vybrana is a Gencrest’s Sustainable Cellulosic Fibre upcycled from agrowaste. Raw fibres are extracted from the Banana Pseudo stem at the end of the plant lifecycle. The biomass waste is then treated by the Gencrest patented Fiberzyme technology. Here, cocktail enzyme formulations remove the high lignin content and other impurities and help fibre fibrillation. The company's proprietary cottonisation process provides fine, spinnable cellulose staple fibres suitable for blending with other staple fibres and can be spun on any conventional spinning systems giving yarns sustainable apparel. Vybrana is produced without the use of heavy chemicals and minimized water consumption and in a waste-free process where balance biomass is converted to bio stimulants Agrosatva and Bio Fertilizers & organic manure.

HeiQ AeoniQ™ – technology for more sustainability of textiles – HeiQ (Austria)
HeiQ AeoniQ™ is the disruptive technology and key initiative from HeiQ with the potential to change the sustainability of textiles. It is the first climate-positive continuous cellulose filament yarn, made in a proprietary manufacturing process and the first to reproduce the properties of polyester and nylon yarns in a cellulosic, biodegradable, and endlessly recyclable fibre.
HeiQ AeoniQ™ can be manufactured from different cellulosic raw materials such as pre- and post-consumer textile waste, biotech cellulose, and non-valorized agricultural waste, such as ground coffee waste or banana peels. It naturally degrades after only 12 weeks in the soil. Each ton of HeiQ AeoniQ™ saves 5 tons of CO2 emissions. The first garments made with this innovative cellulosic filament fiber were commercially launched in January 2023.

TENCEL™ LUXE – lyocell filament yarn – Lenzing (Austria)
TENCEL™ LUXE is LENZING’s new versatile lyocell yarn that offers an urgently needed sustainable filament solution for the textile and fashion industry. A possible botanical alternative for silk, long-staple cotton, and petrol-based synthetic filaments, is derived from wood grown in renewable, sustainably managed forests, and produced in an environmentally sound, closed-loop process that recycles water and reuses more than 99 % of organic solvent. Certified by The Vegan Society, it is suitable for a wide range of applications and fabric developments, from finer high fashion propositions to denim constructions, seamless and activewear innovations, and even agricultural and technical solutions.

Nullarbor™ – Nanollose & Birla Cellulose (Australia/India)
In 2020, Nanollose & Birla Cellulose started a journey to develop and commercialize tree-free lyocell from bacterial cellulose, called Nullarbor™. The name derives from the Latin “nulla arbor” which means “no trees”. Initial lab research at both ends led to a joint patent application with the patent “production of high-tenacity lyocell fibres made from bacterial cellulose”.
Nullarbor is significantly stronger than lyocell made from wood-based pulp; even adding small amounts of bacterial cellulose to wood pulp increases the fibre toughness. In 2022, the first pilot batch of 260kg was produced with 20 % bacterial pulp share. Several high-quality fabrics and garments were produced with this fibre. The collaboration between Nanollose & Birla Cellulose now focuses on increasing the production scale and amount of bacterial pulp in the fibre.

Circulose® – makes fashion circular – Renewcell (Sweden)
Circulose® made by Renewcell is a branded dissolving pulp made from 100 % textile waste, like worn-out clothes and production scraps. It provides a unique material for fashion that is 100 % recycled, recyclable, biodegradable, and of virgin-equivalent quality. It is used by fibre producers to make staple fibre or filaments like viscose, lyocell, modal, acetate or other types of man-made cellulosic fibres. In 2022, Renewcell, opened the world’s first textile-to-textile chemical recycling plant in Sundsvall, Sweden – Renewcell 1. The plant will eventually reach 120,000 tons of annual capacity.

Sparkle sustainable sanitary pads – Sparkle Innovations (United States)
Globally, around 300 billion period products are discarded every year, resulting in millions of tons of non-biodegradable waste. Since most conventional sanitary pads contain up to 90 % plastics, they do not biodegrade for around 600 years. Sparkle has designed sustainable, plastic-free, biodegradable and compostable Sparkle sanitary pads. From product to packaging, they are made up of around 90 % cellulose-based materials with top sheet, absorbent core, release paper, wrapping paper and packaging made of cellulose-based fibres. Whether Sparkle pads end up in a compost pit, are incinerated or end up in a landfill, they are a more sustainable alternative compared to conventional pads that contain large amounts of plastics, complex petro-chemical based ingredients and artificial fragrances. When tested according to ISO 14855-1 by a leading independent lab in Europe, Sparkle pads reached over 90 % absolute biodegradation within 90 days in commercial composting conditions.

Effective March 1st, Ib Jensen takes over from Jan Secher as Chief Executive Officer of Perstorp Group, a specialty chemicals company headquartered in Malmö, Sweden and since 2022 part of PETRONAS Chemicals Group Berhad (PCG).

Ib Jensen is a highly respected senior industry executive with a long career as CFO and extensive experience from M&A and integration of acquired companies, something that will be required in the next phase for Perstorp.

After more than 9 successful years as the CEO of Perstorp Group, Jan Secher has decided to step down. This decision is based on a personal direction set more than a year ago, prior to the acquisition by PCG, allowing for a full search process to be conducted for his replacement. Ib Jensen has been CFO of Perstorp for the past year and was considered the most qualified candidate based on his knowledge of the company, long term experience of the specialty chemicals industry and high level of appreciation in both Perstorp as well as in PCG. Previous experience include CFO and executive roles within Finance and IT at companies such as Arxada, Lonza, Syngenta, Danisco and LEGO.

Jan Secher remains in the CEO role until March 1st and will thereafter serve as an advisor to the new CEO and the Chairman, focusing on strategy and transferring external relationships. Monica Jönsson, currently deputy CFO, will take on the role as CFO when Ib Jensen assumes the position as CEO. PCG is fully committed to the Executive Leadership Team of Perstorp and expects the team to continue the successful integration work as well as dealing with the volatile global macro situation.

• Best practices in chemical footprints

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, received top ranking, for the second consecutive year, among the world's 54 largest chemical companies in the ChemScore ranking by ChemSec, for its efforts to reduce its chemical footprint.

IVL is also the only chemical company that uses the Substitute It Now (SIN) List to remove hazardous substances, market safer alternatives, use bio-based and hazard-free recycled feedstocks, and develop low-carbon products. This reinforces IVL’s purpose of ‘reimagining chemistry together to create a better world’ and underscores the company’s support for the United Nations Sustainable Development Goals (SDGs).

Factors that increased IVL’s score include its ambition to use 16% bio-based and 10% recycled raw materials (rPET) as feedstock by 2030, and safer green chemistry substitutions to reduce toxicity from raw materials and production processes. IVL’s Deja™ brand, offering the world's first carbon-neutral PET pellet solution, is a sustainable alternative to reduce environmental impact.

The ChemScore ranking was developed by ChemSec, the non-profit International Chemical Secretariat in Sweden that advocates for safer alternatives to toxic chemicals, provide investors with better information to assess companies with strong chemical management strategies, and increased transparency. The ranking covers hazardous chemical portfolios, the development of safer chemicals and circular products, chemical management and company transparency, and responses to controversies, lawsuits, and regulations.

Perstorp has been acquired by PETRONAS Chemicals Group Berhad (PCG), Malaysia´s leading integrated chemicals provider and part of PETRONAS Group, on 11 October 2022.

In May this year, PCG signed a Securities Purchase Agreement with Financière Forêt S.à.r.l, a company under PAI Partners, a European private equity firm, to acquire the entire equity interest in Perstorp, a leading sustainability-driven global specialty chemicals company based in Sweden. With the completion of the acquisition, Perstorp is now PCG’s wholly-owned subsidiary.

PCG will strive to ensure the timely completion of Perstorp’s growth projects in a safe and cost-effective manner. Perstorp has several projects lined up in the near future, including the launch of Project Air which aims to reduce carbon emissions through the production of sustainable methanol. Recently, The European Union Innovation Fund selected Project Air, as one of the 17 large-scale green tech projects, which together will be granted more than EUR 1.8 billion. Project Air is a gamechanger for the chemical industry, moving from fossil raw materials to recycled and bio-based feedstock, thereby enabling sustainable chemical products to a large variety of industries and end products. At full capacity, it will reduce global CO2 emissions with close to 500,000 metric tons per year from today’s levels, corresponding to one percent of current emissions in Sweden.